FCC ID: UCZ-AX62TR-Z Home Center Extender

Lorex Home Center Extender AX62TR Series Quick Start Guide lorex.com Welcome!

From all of us at Lorex, we welcome you to our community thanks for your purchase of the Lorex Home Center Extender. We designed this product with you in mind, to extend the performance and range of our new Lorex Home Center. Heres how to get started. What youll find in the box Lorex Home Center Extender USB Power Pack Overview LED indicator Reset /

disable alarm button Speaker USB power port Placement of the Lorex Home Center Extender Based on factors such as the distance between your devices, the size of your home, environmental conditions, physical obstructions, and how much frequency interference there is in your area, here are some placement recommendations for the extender/repeater. Find a central location. The ideal location to place the extender/repeater is halfway between your Lorex Home Center and your other Lorex device(s) that need better Wi-Fi. Look for a power outlet thats roughly halfway between your Lorex Home Center and your other Lorex device(s). Placement of the Lorex Home Center Extender Limit the amount of walls, ceilings, and other major obstructions between the extender/

repeater and your other Lorex device(s). Make sure that the outlet that you choose has a strong Wi-Fi signal from your home router. Device Setup Attention: Setup the Lorex Home Center before going through these steps. 1. Plug the USB power cable into the extender/repeater. Then plug the power adapter into a wall outlet to power on. Note: The LED light will flash blue when ready to pair. 2. Unlock the Lorex Home Center and tap on Device Manager in the homescreen. 3. Go to the Repeater tab, then tap + on the top right to pair. 4. In the Device Setup screen, tap Repeater and tap Next. 5. Once your device has been detected, tap Next. The Lorex Home Center will now display the extender/repeater on your homescreen. Device Settings You can view the extender/repeaters device information or configure the settings for sound, LED light status, and firmware updates, all through the Lorex Home Center. To open the extender/repeaters Device Settings:

1. Unlock your Lorex Home Center and tap the extender/repeater displayed on the homescreen. 2. In the extender/repeaters device screen, tap the three dots on the top for settings. Sound Settings There are two audio options that can be enabled or disabled in the extender/repeaters sound settings. 1. Event Notification Chime: The extender/repeater will sound the event notification chime when a camera has detected motion or a sensor has been triggered. The chime is disabled by default. 2. Doorbell Chime: When someone rings the doorbell, the extender/repeater will sound the doorbell chime. The chime is enabled by default. Note: You must have a Lorex doorbell connected to the Lorex Home Center for this option. Light Status Indicators See the table below for definitions of the extender/repeaters LED light status indicators:

(off) Powered off LED status is turned off Powered on Pairing successful Strong Wi-Fi signal strength

(flashing) Pairing with other devices Resetting

(flashing) Disconnected from the Lorex Home Center

(flashing alternatively) Firmware update in progress Weak Wi-Fi signal strength

(flashing) Alarm has been triggered Troubleshooting 1. After installing the extender/repeater, I still have low signal strength on my camera(s). Make sure that your faraway camera(s) are connected to the extender/repeater directly. To check this, go to the Lorex Home Centers Device Manager settings from the homescreen and see if your camera(s) are still connected. If youre finding that your camera(s) are still connected to the Lorex Home Center and not to the extender/repeater, then you will need to do the following:

1. Power off the camera(s) with low Wi-Fi signal strength. 2. Make sure the extender/repeater is powered on and connected to the Lorex Home Center. 3. Power the camera(s) back on. Your camera(s) should now automatically connect to the extender/repeater as long as the signal from the extender/repeater is stronger than the signal from the Lorex Home Center. If you are still having trouble, consider moving the extender/repeater closer to the camera(s). 2. The extender/repeater is showing low signal strength. How do I fix this?

Go to the page Placement of the Lorex Home Center Extender on this quick start guide for optimal placement recommendations. 3. How do I reset the extender/repeater?

Press and hold down the reset button on the back of the extender/repeater for about 10 seconds until you hear the chime. The extender/repeater will then reset and the LED light status will flash blue to indicate that its ready to pair to your Lorex Home Center. Lorex Home Center Extender For up-to-date information and support, visit help.lorex.com/series/LHCE. Important:

outdoors. The Lorex Home Center Extender is rated for indoor use only. Do not use Only use with included power supply. A Lorex Home Center is required to operate the Lorex Home Center Extender. FCC NOTICE THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND

(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

LOREX TECHNOLOGY INC. Made in XXXXX onrccen ADD MAC ID) TOE TATA TT TT WIFI MAG: XXXXXXXXXXXXX ADD SERIAL NUMBER TAT SIN: XXXXXXXXXXXXXXXX FCC Warning Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Lorex Technology Inc TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: UCZ-AX62TR-Z To whom it may concern:

Date: 2020-06-30 We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Lorex Technology Inc. This authorization is valid until further written notice from the applicant. Name (Printed): Niles Kanapathipillai Title: Director, Quality Assurance Signature:

On behalf of Company: Lorex Technology Inc Telephone: (905) 946-8589 Ext: 125

Applicant Declaration SGS North America Inc 620 Old Peachtree Road SUITE 100 Suwanee, United Georgia States 30024 Applicant Legal Business Name Lorex Technology Inc. Address Grantee Code FCCID 250 Royal crest Court, Markham, L3R 3Sl, Ontario, ucz UCZ-AX62TR-Z Canada. AulhoizedContact Name Niles Kanapathipillai Contact Ema niles@lorexcorp.com Contact Phone

(905) 946-8589 Ext: 125 I, the undesigned,certify that I am an authorized signatory for the Applicant and theeforedeclare;

a) in accordance with 47CFR2.911

(d), all of the statements herein and the exhtsattached hereto aetrue and corectto the best of my knowledge and belief b) in accepting a Gantof Equipment Authorization issued by a TCB, under the authority of the FCC, as aesultof the representations made in this application, the Applicant isesponsible for

(1) labeling

(2) compliance

(3) compliance of the equipment statement with the exact FCC ID as specified in this application, rules, labeling to the applicable technical ules, with the applicable the equipment pursuant c) if the Applicant that production is not the actual units of this equipment manufactu erof the equipment, appropriate aangements have been made with the manufacture toensure will continue to comply with the FCC's technical requirements. d) in acco dancewith 47 CFR 2.909 and KDB394321, the Applicant hasead,understood and agrees to accept that they aethe responsible party and agree to abide by thei esponsJilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with 1S017065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and ageesto abide by the post maketsurveillance equiements

(1) the Applicant

(2) the Applicant

(3)the Applicant undestands,accepts shall make provisions shall, uponequestby SGS, at the Applicant's and agrees that a sample may be requested to always have a production upon request povidea production sample available expense, by SGS, FCC and/or ISED sample of theequestedpoductto SGS, for surveillance testing FCC and/or soltware ISED as instructed. The sample shall include eview,certification all support required foevaluation, and audit surveillance of products certified by SGS devices, cables, softwae,accessories oothehadwae o f) neithetheApplicant 5301 of the Anti-Drug 47CFR 1.2002(b) nor any party to the application Abuse Act of 1988, 21 U.S.C62because for these purposes. for the definition of a "party"

is subectto a denial of Fedealbenefits, that includes of a conviction for possession odistribution FCC benefits, to Section of a contolledsubstance. pursuant See g) the Applicant has read, understood, accepts and ageesto abide by the SGS North Ameica,lnc.(TCB

) temsand conditions Link to CFRs: htt s://www.fcc. Link to KDBs: https://apps.fcc Link to RSP-100:

htt s://www.ic qov/oetcf/kdb/index.cfm c ca/eic/site/smt-

st.nsf/en

/sf01130.html ov/wireless/bureau-divisions/technolo ies-s stems-and-innovation-division/

ules-reulations

-title-47 NO Date:2020-06-30 dengSIebIIahst.Itn nrsepdeIZrthuanaby ethmdtells esabtada c FC Applicant Declaration Rev:0.0

Lorexechnology Inc To: SGS North America Inc 620 Old Peachtree Road SUITE 100 Suwanee, Geog United States Fom:Lorex Technology Inc Schematic(s) Block Diagrams Opeational LTC_NII Software Security Info The documents information Descriptions Sincerely, Signatue:

Regarding Confidentiality Request regarding application for FCC ID: UCZ-AX62TR-Z LONG TERM CONFIDENTIALITY Pusuant teatment confidential referenced above to 47 CFR Section of the documents 0.459 and 0.457 ofth e commission's rules

, the applicant listed below

, associated with the certification hereby request application above contain may prove harmful proprietary to the business of the applicant infomation not released to the public. Public disclosue of this PintedName (on file with the FCC tie:Directo Company Name: Lorex Technology Assuance Inc ofQuality associated with the Grantee Code): Niles Kanapathipillai

FCC Statement 1. 2. This device may not cause harmful interference, and This device must accept any interference received, including interference responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF exposure warning This equipment must be installed and operated in accordance with provided instructions and antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.