FCC Statement 1. 2. This device may not cause harmful interference, and This device must accept any interference received, including interference responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF exposure warning This equipment must be installed and operated in accordance with provided instructions and antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. IC Statement This device complies with Industry Canada licence-exempt RSS standard(s). 1. 2. This device may not cause interference, and This device must accept any interference, including interference that may Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux suivantes :
1. 2. Lappareil ne doit pas produire de brouillage, et This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. le radiateur et votre corps. type and its gain should be so chosen that the equivalent isotropically radiated power type dantenne et son gain de sorte que la puissance isotrope rayonne quivalente The user manual for local area network devices shall contain instructions related to the restrictions mentioned in the above sections, namely that:
IV
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
(ii) the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate.
(i)Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation l'intrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux.
(ii) le gain d'antenne maximal autoris pour les appareils dans la bande 5725-5850 MHz doivent respecter le pire limites spcifies pour le point--point et l'exploitation non point point, le cas chant. Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5725-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--
d., qu'ils ont la priorit) pour les bandes 5725-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.