all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User manual | Users Manual | 1.55 MiB | November 03 2022 / April 24 2023 | delayed release | ||
1 |
|
Internal photos | Internal Photos | 4.89 MiB | November 03 2022 / April 24 2023 | delayed release | ||
1 |
|
External photos | External Photos | 870.45 KiB | November 03 2022 / April 24 2023 | delayed release | ||
1 |
|
Label and label location | ID Label/Location Info | 1.70 MiB | November 03 2022 | |||
1 |
|
Antenna specification | Cover Letter(s) | 2.11 MiB | November 03 2022 | |||
1 |
|
FCC Authority to Act as Agent | Cover Letter(s) | 95.89 KiB | November 03 2022 | |||
1 |
|
FCC Confidentiality request letter | Cover Letter(s) | 107.57 KiB | November 03 2022 | |||
1 |
|
SAR Test report for | RF Exposure Info | 1.97 MiB | November 03 2022 | |||
1 |
|
SAR Test report for BT-Appendix A-System Validation Plots | RF Exposure Info | 246.05 KiB | November 03 2022 | |||
1 |
|
SAR Test report for BT-Appendix B-Highest Test Plots | RF Exposure Info | 240.65 KiB | November 03 2022 | |||
1 |
|
SAR Test report for BT-Appendix C-Calibration Certification | RF Exposure Info | 4.48 MiB | November 03 2022 | |||
1 |
|
Test report for part1 | Test Report | 4.29 MiB | November 03 2022 | |||
1 |
|
Test report for part2 | Test Report | 2.81 MiB | November 03 2022 | |||
1 |
|
Test setup photos for RF | Test Setup Photos | 349.75 KiB | November 03 2022 / April 24 2023 | delayed release | ||
1 |
|
Test setup photos for SAR | Test Setup Photos | 316.72 KiB | November 03 2022 / April 24 2023 | delayed release |
1 | User manual | Users Manual | 1.55 MiB | November 03 2022 / April 24 2023 | delayed release |
MC-50BT / MC-60BT Wireless Headphones with Wide-Band Active Noise Cancelling QUICK START GUIDE www.mackie.com EN ES FR DE Important Safety Instructions EN ES FR DE 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. Read, follow, and keep these instructions. Heed all warnings. Do not use in or near dangerous environments. This includes driving, cycling, walking, jogging and other areas where traffic is present and accidents could occur. Keep this product and its accessories out of reach of children. Handling or use by children may pose a risk of death or serious injury. Contains small parts and cords that may pose a risk of choking or strangulation. Set the volume level of the audio device to a minimum, and then, after connecting the earphones, adjust the volume gradually. Sudden exposure to loud noises could cause hearing damage. Keep headphones clean. To clean the headphones, wash outside with a mild detergent solution. Do not attempt to modify this product. Doing so could result in personal injury and/or product failure. Do not immerse in water, such as while taking a shower, bath, or washing your face. Otherwise, sound deterioration or failures may result. Do not use while sleeping as accidents may result. Use a slow twisting motion to remove the earphones. Never pull on the earphone cord. Stop using the earphones immediately if they are causing great discomfort, irritation, rash, discharge, or any other uncomfortable reaction. If you are currently receiving ear treatment, consult your physician before using this device. Operating Temperature: 10+50 C // 14122 F Charging Temperature: 0+45 C // 32113 F Storage Temperature: 20+60 C // 4140 F This device complies with Part 15 of the FCC Rules [and contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas license-exempt RSS standard(s)]. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:
(1) Lappareil ne doit pas produire de brouillage, et
(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This equipment complies with FCC and ISED radiation exposure limits set forth for an uncontrolled environment. In case this equipment has to subject to FCC/IC SAR (Specific Absorption Rate) exposure test, this equipment is designed to meet the requirements for exposure to radio waves established by the FCC and ISED. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body or on the head, with no separation. To meet RF exposure guidelines and reduce exposure to RF energy during the operation, this equipment should be positioned at least this distance away from the head. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAUTION: Changes or modifications to this device not expressly approved by LOUD Audio, LLC. could void the users authority to operate the equipment under FCC rules. Canada ICES-003(B)/NMB-003(B) RF Power: 20dBm Bluetooth frequency range: 2400~2483.5 MHz Exposure to extremely high noise levels may cause permanent hearing loss. Individuals vary considerably in susceptibility to noise-induced hearing loss, but nearly everyone will lose some hearing if exposed to sufficiently intense noise for a period of time. The U.S. Governments Occupational Safety and Health Administration (OSHA) has specified the permissible noise level exposures shown in the chart. According to OSHA, any exposure in excess of these permissible limits could result in some hearing loss. Duration, per day in hours 8 6 4 3 2 1.5 1 0.5 0.25 or less Sound Level 90 dB 92 dB 95 dB 97 dB 100 dB 102 dB 105 dB 110 dB 115 dB High sound pressure. Hearing damage risk. Do not listen at high volume levels for long periods. WARNING The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like. NOTE ON STATIC ELECTRICITY Static electricity accumulated in the body may cause mild tingling in your ears. To minimize the effect, wear clothes made from natural materials. CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. CAUTION A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas. Correct disposal of this product: This symbol indicates that this product should not be disposed of with your household waste, according to the WEEE directive (2012/19/EU) and your national law. This product should be handed over to an authorized collection site for recycling waste electrical and electronic equipment (EEE). Improper handling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, waste authority, or your household waste disposal service. 2 MC-50BT and MC-60BT Wireless Headphones with Wide-Band Active Noise CancellingMC-50BT and MC-60BT Wireless Headphones with Wide-Band Active Noise Cancelling Instrucciones Importantes de Seguridad EN ES FR DE 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. Lea, cumpla y conserve estas instrucciones. Preste atencin a todas las advertencias. No use este aparato en o cerca de entornos peligrosos. Esto incluye mientras conduce, va en bicicleta, andando, corriendo y en otros entornos con trfico en los que se puedan producir accidentes. Mantenga este aparato y sus accesorios fuera del alcance de los nios. Lo contrario puede suponer un riesgo de accidentes mortales o muy graves. Este aparato contiene piezas pequeas y cables que pueden suponer un riesgo de asfixia. Ajuste al mnimo el nivel de volumen del dispositivo audio conectado y despus, tras conectar los auriculares, ajuste el volumen gradualmente. Una exposicin brusca a sonidos muy potentes puede producir daos auditivos (sordera). Mantenga limpios los tapones y auriculares usando un trapo humedecido en agua jabonosa. No trate de modificar este aparato. El hacerlo puede dar lugar a daos personales y/o fallos en el aparato. No sumerja estos auriculares, como al darse una ducha, bao o lavarse. El no tener en cuenta esta advertencia puede dar lugar afallos o averas. No use este aparato mientras duerme de cara a evitar accidentes. Extraiga los tapones tirando con un suave giro. Nunca tire del cable de los auriculares. Deje de usar los auriculares de inmediato si le producen molestias, irritaciones, pinchazos, descargas u otra reaccin adversa. Si est recibiendo cualquier tipo de tratamiento en el odo, consulte a su mdico antes de usar este aparato. Temperatura de funcionamiento: 10+50 C // 14122 F Temperatura de cargando: 0+45 C // 32113 F Temperatura de almacenamiento: 20+60 C // 4140 F Se ha verificado que esta unidad de acuerdo a la seccin 15 de las normativas FCC, y un emisor(es)/receptor(es) sin necesidad de licencia que cumple con la RSS(es) canadiense Innovation, Science and Economic Development de dispositivos sin necesidad de licencia. Su funcionamiento est sujeto a las dos condiciones siguientes:
(1) Este dispositivo no debe producir interferencias molestas, y
(2) Este dispositivo debe aceptar cualquier interferencia recibida, incluyendo aquellas que puedan producir un funcionamiento no deseado. Este aparato cumple con los lmites de exposicin a radiaciones FCC e ISED establecidas para entornos no controlados. Si este aparato debe ser sometido a un test de exposicin SAR (ratio especfico de absorcin) FCC/IC, es nuestra obligacin indicar que este equipo ha sido diseado para cumplir con los requerimientos de exposicin a ondas de radio establecidos por el FCC e ISED. Estos requerimientos fijan un lmite SAR de 1.6 W/kg medido sobre un gramo de tis. Ese ha sido el valor SAR mximo comprobado bajo este standard durante la certificacin de este producto para su uso colocado correctamente en contacto con el cuerpo o la cabeza. Para cumplir con las recomendaciones en cuanto a exposicin a RF y reducir la exposicin a energa de RF durante su funcionamiento, coloque este aparato al menos con la separacin con respecto a la cabeza indicada en el manual. NOTA: Se ha verificado que esta unidad cumple con los lmites de los aparatos digitales de clase B, de acuerdo a la seccin 15 de las normativas FCC. Estos lmites han sido diseados para ofrecer una proteccin razonable contra las interferencias molestas que se pueden producir cuando se usa este aparato en un entorno no-profesional. Este aparato genera, utiliza y puede irradiar energa de radiofrecuencia y, si no es instalado y usado de acuerdo al manual de instrucciones, puede producir interferencias molestas en las comunicaciones de radio. No obstante, no existen garantas de que no se produzca interferencias en una instalacin concreta. Si este aparato produce interferencias molestas en la recepcin de radio o TV (lo cual puede ser determinado fcilmente apagando y encendiendo este aparato), el usuario ser el responsable de tratar de corregir dichas interferencias adoptando una o ms de las medidas siguientes:
Reorientar o reubicar la antena receptora. Aumentar la separacin entre este aparato y el receptor. Conectar este aparato a una salida o circuito distinto al que est conectado el receptor. Solicitar ayuda adicional al distribuidor o a un tcnico especialista en radio/TV. CUIDADO: Cambios o modificaciones a este dispositivo no aprobadas expresamente por LOUD Audio, LLC. pueden anular la autoridad del usuario para operar este equipo bajo las reglas de la FCC. Canada ICES-003(B)/NMB-003(B) Potencia de RF: 20dBm Rango de frecuencia Bluetooth: 2400~2483.5 MHz Duracin diara en horas Nivel de sonido 8 6 4 3 2 1,5 1 0,5 0,25 o menos 90 dB 92 dB 95 dB 97 dB 100 dB 102 dB 105 dB 110 dB 115 dB La exposicin a niveles de ruido extremadamente altos puede causar problemas de sordera crnica. La susceptibilidad a esta prdida de audicin inducida por el ruido vara considerablemente de una persona a otra, pero casi cualquier persona tendr una cierta prdida de audicin al quedar expuestos a un ruido intenso durante un determinado periodo de tiempo. El Departamento de Salud y Seguridad en el Trabajo de Estados Unidos (OSHA, por sus siglas en ingls) ha establecido unos niveles de ruido permisibles que aparecen en la siguiente tabla. De acuerdo a la OSHA, cualquier exposicin que sobrepase estos lmites permisibles puede dar lugar a un problema de sordera. Presin sonora elevada. Riesgo de daos auditivos. No escuche la seal audio a niveles de volumen excesivo durante periodos prolongados. ATENCIN Si batera queda expuesta a una presin de aire extremadamente baja se puede producir una explosin o una fuga del lquido o gas inflamable que contiene. NOTA RELATIVA A LA ELECTRICIDAD ESTTICA La electricidad esttica acumulada en el cuerpo puede producir un leve hormigueo en sus odos. Para reducir este efecto, use prendas fabricadas con tejidos naturales. PRECAUCIN La pila (pila o bloque de pilas) nunca debe quedar expuesto a niveles de calor excesivos, como por ejemplo expuesto a la luz solar directa, a una llama o similares. ATENCIN Existe el riesgo de explosin en caso de una sustitucin incorrecta de la pila. Sustituya esta pila nicamente por otra idntica o de tipo equivalente. Forma correcta de eliminar este aparato: Este smbolo indica que este producto no puede ser eliminado junto con la basura orgnica, de acuerdo a lo indicado en la Directiva de Residuos de Aparatos Elctricos y Electrnicos
(2012/19/EU) y a la legislacin vigente de su pas. Este producto debe ser entregado en uno de los puntos limpios autorizados para su reciclaje. La eliminacin inadecuada de este tipo de residuos puede tener un impacto negativo en el medio ambiente y la salud humana debido a las sustancias potencialmente peligrosas asociadas generalmente con este tipo de aparatos. Al mismo tiempo, su cooperacin a la hora de eliminar adecuadamente este producto contribuir a un uso ms eficaz de los recursos naturales. Para ms informacin acerca la correcta eliminacin de este tipo de aparatos, pngase en contacto con el Ayuntamiento de su ciudad, empresa local de recogida de basuras o con uno de los puntos limpios autorizados. 3 Quick Start GuideQuick Start Guide Consignes de scurit importantes EN ES FR DE 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. Lisez, appliquez et conservez ces instructions. Tenez compte de tous les avertissements. Ne pas utiliser dans ou proximit dun environnement dangereux. Cela inclus les zones o la conduite, le cyclisme, la marche, la course sont pratiqus et tout autre endroit o du trafic a lieu et o un accident peut se produire. Conservez ce produit et ses accessoires hors de la porte des enfants. La manipulation ou lutilisation par des enfants peuvent causer la mort ou des blessures srieuses. Contient des petites pices et des cordons pouvant poser un risque de suffocation ou de strangulation. Rglez le volume de lappareil au minimum puis, aprs connexion des couteurs, augmentez-le progressivement. Une exposition soudaine des bruits impor tants peut endommager votre audition. Gardez vos couteurs propres. Pour les nettoyer, utilisez une solution dtergente douce. Nessayez pas de modifier ce produit. Cela pourrait provoquer des blessure et/ou endommager le produit. Nimmergez pas le produit dans leau, par exemple en prenant une douche ou un bain. Cela peut dtriorer le son ou causer des malfonctions. Ne pas utiliser en dormant pour viter tout accident. Retirez les couteurs en les tournant lentement. Ne tirez jamais sur les cordons. Retirez les couteurs immdiatement si une gne importante, une irritation, des rougeurs, un coulement ou toute autre raction inconfortable se produit. Si vous suivez un traitement auriculaire, consultez votre mdecin avant dutiliser ce produit. Temprature de fonctionnement: 10+50 C // 14122 F Temprature de mise en charge: 0+45 C // 32113 F Temprature de stockage: 20+60 C // 4140 F Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:
(1) Lappareil ne doit pas produire de brouillage, et
(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Ce matriel est conforme aux limites dexposition aux radiations de la FCC et de lISED pour un environnement non contrl. Si ce matriel doit tre soumis un test de DAS (Dbit dAbsorption Spcifique) de la FCC/IC, il est conu pour tre conforme aux normes sur lexposition aux ondes radio tablies par la FCC et lISED. Ces normes dfinissent une valeur maximale du DAS d1,6 W/kg en moyenne par gramme de tissu. La valeur de DAS la plus leve enregistre pour cette norme dans le cadre de lhomologation lors de lessai sur le corps ou la tte, sans sparation. Afin dtre conforme aux directives sur lexposition aux frquences radio et de rduire lnergie radio durant son fonctionnement, le matriel doit tre positionn au moins cette distance de la tte. REMARQUE : Cet appareil rpond aux normes sur les quipements numriques de Classe B, alina 15 des lois fdrales. Ces normes prsentent une protection raisonnable contre les interfrences en environnement rsidentiel. Cet appareil gnre, utilise, et peut mettre des frquences radio et, sil nest pas install correctement selon les instructions, peut causer des interfrences nuisibles aux communications radio. Ceci dit, il ny a aucune garantie que les interfrences napparatront jamais dans une installation particulire. Si cet quipement cause des interfrences aux rceptions radio ou tlvisuelles, ce qui peut tre dtermin en plaant lappareil sous/hors tension, essayez dviter les interfrences en suivant lune de ces mesures :
Rorientez ou dplacez lantenne de rception. loignez lappareil du rcepteur perturb. Connectez lappareil une ligne secteur diffrente de celle du rcepteur. Consultez un revendeur ou un technicien radio/TV. MISE EN GARDE : Les modifications apportes cet appareil sans laccord de LOUD Audio, LLC. annulent votre droit utiliser cet appareil
(selon les lgislations fdrales). Canada ICES-003(B)/NMB-003(B) Puissance du RF: 20dBm Plage de frquences Bluetooth : 2400~2483.5 MHz Dure, en heures par jour 8 6 4 3 2 1,5 1 0,5 0,25 ou moins Niveau sonore 90 dB 92 dB 95 dB 97 dB 100 dB 102 dB 105 dB 110 dB 115 dB Lexposition des niveaux de bruit trs levs peut entraner une perte permanente de loue. La sensibilit ces dommages varie dun individu lautre, mais tout le monde est appel des dommages auditifs extrmes en prsence de niveaux sonores levs. LAdministration de la Scurit et de la Sant (OSHA) du Gouvernement des tats-Unis a publi les niveaux de bruit indiqus dans le tableau ci-dessous. Selon lOSHA, toute exposition au-del de ces limites entrane des dommages auditifs. Pression sonore leve. Risques de dommages causs laudition. Ncoutez jamais de sons volume lev pendant de longues priodes. ATENCIN Une batterie soumise une pression atmosphrique extrmement basse peut prsenter des risques dexplosion ou de fuite de liquide ou gaz inflammable. AVERTISSEMENT La batterie (batterie ou batteries ou bloc-batterie) ne doit pas tre expose une chaleur excessive telle que les rayons du soleil, le feu ou assimils. REMARQUE SUR LLECTRICIT STATIQUE Llectricit statique accumule dans le corps peut provoquer de lgers picotements dans vos oreilles. Pour minimiser cet effet, portez des vtements en matriaux naturels. ATTENTION Risque dexplosion si la batterie nest pas remplace correctement. Remplacez-la uniquement par une batterie de mme type. Mise au rebut approprie de ce produit: Ce symbole indique quen accord avecla directive WEEE (2012/19/EU) et les lois en vigueur dans votre pays, ce produit ne doit pas tre jet avec les dchets mnagers. Ce produit doit tre dpos dans un point de collecte agr pour le recyclage des dchets dquipements lectriques et lectroniques (EEE). Une mauvaise manipulation de ce type de dchets pourrait avoir un impact ngatif sur lenvironnement et la sant cause des substances potentiellement dangereuses gnralement associes ces quipements. En mme temps, votre coopration dans la mise au rebut de ce produit contribuera lutilisation efficace des ressources naturelles. Pour plus dinformations sur lendroit o vous pouvez dposer vos dchets dquipements pour le recyclage, veuillez contacter votre mairie ou votre centre local de collecte des dchets. 4 MC-50BT and MC-60BT Wireless Headphones with Wide-Band Active Noise CancellingMC-50BT and MC-60BT Wireless Headphones with Wide-Band Active Noise Cancelling Wichtige Sicherheitshinweise EN ES FR DE 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. Anleitungen lesen, befolgen und aufbewahren. Warnhinweise beachten. Nicht in gefhrlichen Situationen verwenden, zum Beispiel beim Auto/Rad fahren, Laufen, Joggen und anderen Verkehrssituationen, die zu Unfllen fhren knnen. Produkt und Zubehr von Kindern fernhalten, da sie sich ernsthaft oder tdlich verletzen knnten. Es besteht Erstickungsgefahr durch Kleinteile und Kabel. Lautstrke des Audiogerts ganz zurckdrehen und erst nach Anschluss der Ohrhrer langsam aufdrehen. Pltzliche, laute Gerusche knnen Hrschden verursachen. Kopfhrer sauber halten und regel mig mit mildem Reinigungs mittel abwaschen. Produkt nicht modifizieren, da dies zu Verletzungen und/oder Betriebs strungen fhren knnte. Ohrhrer nicht beim Duschen, Baden, Gesichtwaschen oder anderen Gelegen heiten ins Wasser tauchen, um verminderte Klangqualitt oder Betriebsstrungen zu vermeiden. Nicht beim Schlafen tragen, um Unflle zu vermeiden. Ohrhrer mit einer langsamen Dreh bewegung entfernen. Nicht am Kabel ziehen. Ohrhrer sofort abnehmen, wenn sie starke Beschwerden, Reizungen, Hautausschlge, Absonderungen oder andere unangenehme Reaktionen verursachen. Erlaubnis zur Nutzung der Ohrhrer einholen, wenn man aktuell bei einem Ohrenarzt in Behandlung ist. Betriebstemperatur: 10+50 C // 14122 F Aufladentemperatur: 0+45 C // 32113 F Lagertemperatur: 20+60 C // 4140 F Dieses Gert wurde getestet und entspricht den Einschrnkungen Part 15 der FCC Vorschriften, und enthlt lizenzbefreite Sender/Empfnger, die dem lizenzbefreiten RSS von Innovation, Science and Economic Development Canada entsprechen. Der Betrieb unterliegt folgenden zwei Bedingungen:
(1) Dieses Gert darf keine schdlichen Interferenzen erzeugen und
(2) Dieses Gert muss empfangene Interferenzen verkraften knnen, einschlielich Strungen,die mglicherweise den Betrieb auf unerwnschte Weise beeinflussen. Dieses Gert entspricht den FCC- und ISED-Grenzwerten fr die Strahlenbelastung, die fr eine unkontrollierte Umgebung festgelegt wurden. Fr den Fall, dass dieses Gert einem FCC/IC SAR (Specific Absorption Rate)-Test unterzogen werden muss, ist dieses Gert so konstruiert, dass es die von der FCC und ISED festgelegten Anforderungen fr die Belastung durch Funkwellen erfllt. Diese Anforderungen legen einen SAR-Grenzwert von 1,6 W/kg, gemittelt ber ein Gramm Gewebe, fest. Der hchste SAR-Wert, der im Rahmen dieser Norm bei der Produktzertifizierung fr die Verwendung bei ordnungsgemem Tragen am Krper oder am Kopf ohne Trennung angegeben wurde. Um die RF-Expositionsrichtlinien zu erfllen und die Exposition gegenber RF-Energie whrend des Betriebs zu reduzieren, sollte dieses Gert mindestens in diesem Abstand vom Kopf getragen werden. HINWEIS: Dieses Gert wurde getestet und entspricht den Einschrnk-ungen fr Class B Digitalgerte, gem Part 15 der FCC Vorschriften. Diese Einschrnkungen sollen angemessenen Schutz vor schdlichen Inter-ferenzen bei der Installation in Wohngebieten bieten. Dieses Gert erzeugt, verwendet und kann Rundfunkfrequenz-Energie ausstrahlen und kann, wenn es nicht gem den Anleitungen installiert und betrieben wird, schdliche Interferenzen bei der Rundfunkkommunikation erzeugen. Es gibt allerdings keine Garantien, dass bei einer bestimmten Installation keine Interferenzen auftreten. Wenn dieses Gert schdliche Interferenzen beim Radio oder TV-Empfang verursacht, was sich durch Aus und Einschalten des Gerts feststellen lsst, sollte der Anwender versuchen, die Interferenzen durch eine oder mehrere der folgenden Manahmen zu beseitigen:
Die Empfangsantenne neu ausrichten oder neu positionieren. Die Entfernung zwischen Gert und Empfnger erhhen. Das Gert an die Steckdose eines anderen Stromkreises als den des Empfngers anschlieen. Einen Fachhndler oder erfahrenen Radio-/TV-Techniker um Hilfe bitten. 8 6 4 3 2 1,5 1 0,5 Nutzung pro Tag in Stunden Schallpegel 90 dB 92 dB 95 dB 97 dB 100 dB 102 dB 105 dB 110 dB 115 dB VORSICHT: nderungen oder Modifikationen an diesem Gert, die von LOUD Audio, LLC nicht ausdrcklich genehmigt sind, knnen zum Verlust der Betriebserlaubnis gem den FCC Vorschriften fhren. 0,25 oder weniger Canada ICES-003(B)/NMB-003(B) RF-Leistung: 20dBm Bluetooth Frequenzbereich: 2400~2483.5 MHz Extrem hohe Geruschpegel knnen zu dauerhaftem Gehrverlust fhren. Lrmbedingter Gehrverlust tritt von Person zu Person unterschiedlich schnell ein, aber fast jeder wird einen Teil seines Gehrs verlieren, wenn er ber einen Zeitraum ausreichend hohen Lrmpegeln ausgesetzt ist. Die Occupational Safety and Health Administration (OSHA) der US-Regierung hat den zulssigen Geruschpegel in der folgenden Tabelle festgelegt. Nach Meinung der OSHA knnen alle Lrmpegel, die diese zulssigen Grenzen ber schreiten, zu Gehrverlust fhren. Hoher Schalldruck. Gefahr von Hrschden. Hren Sie nicht ber lngere Zeitrume mit hoher Lautstrke. ACHTUNG Die Batterie (Batterien oder Akkus) darf keiner bermigen Hitze wie Sonnenlicht, Feuer oder hnlichem ausgesetzt werden. VORSICHT Wenn die Batterie nicht korrekt ersetzt wird, besteht Explosionsgefahr. Verwenden Sie als Ersatz nur den gleichen oder einen gleichwertigen Batterietyp. HINWEIS ZU STATISCHER ELEKTRIZITT Statische Elektrizitt kann sich im Krper ansammeln und Kribbeln in den Ohren verursachen. Tragen Sie Kleidung aus Naturfasern, um diesen Effekt zu verringern. VORSICHT Bei einer Batterie, die extrem niedrigen Luftdruck ausgesetzt ist, besteht die Gefahr einer Explosion oder des Austretens von entflammbaren Flssigkeiten oder Gasen. Korrekte Entsorgung dieses Produkts: Diese Symbol weist darauf hin, dass das Produkt entsprechend den WEEE Richtlinien (2012/19/EU) und den Landesgesetzen nicht im Hausmll entsorgt werden darf. Dieses Produkt sollte einer autorisierten Sammelstelle zum Recyceln von unbrauchbaren elektrischen und elektronischen Gerten (EEE) bergeben werden. Unsachgemer Umgang mit dieser Abfallart knnte aufgrund der in EEE enthaltenen gefhrlichen Substanzen negative Auswirkungen auf die Umwelt und menschliche Gesundheit haben. Gleichzeitig tragen Sie durch Ihre Teilnahme an der korrekten Entsorgung dieses Produkts zu einer effektiven Nutzung natrlicher Ressourcen bei. Weitere Informationen zu Annahmestellen, die unbrauchbare Gerte recyceln, erhalten Sie bei der rtlichen Stadtverwaltung, dem Entsorgungstrger oder der Mllabfuhr. 5 Quick Start GuideQuick Start Guide MC-50BT 4 3 2/4 3 2 1 6 1 7 3 MC-60BT 4 5 2 4 6 1 5 Descriptions EN ES FR DE 1. USB C Connector This connector is used for charging the unit. 2. Power / Bluetooth The power button turns the MC-50BT and MC-60BT on and off. Press and hold to pair with a Bluetooth device when powering on.
[MC-50BT] Double-tap to enter ambient mode. 3. ANC Turns the ANC on and off.
[MC-60BT] Press to filter through ANC, Ambient & Off modes. 4. Status LED This LED indicates the status of the unit, including power, battery level, device pairing and more. 5. 1/8" Input Jack [MC-60BT] This jack allows for a wired connection. 6. Right Earcup Swipe, tap and/or hold the right earcup to pause/play, answer/end phone calls, go the previous/next track, raise/lower the volume and more. 7. Left Earcup [MC-60BT] Place the left earcup on the included charging pad for wireless charging. When the headset is charging, it automatically shuts down. Note: The MC-60BT headset cannot be used with the Aux in when charging. EN ES FR DE Descriptif 1. Connecteur USB C Permet de charger lappareil. 2. Power / Bluetooth Lbouton permet de mettre le MC-50BT et MC-60BT sous/hors tension. Maintenez enfonc pour appairer un appareil Bluetooth lors de la mise sous tension.
[MC-50BT] Touchez deux fois pour activer le mode ambiant. 3. ANC Permet de mettre ANC sous/hors tension.
[MC-60BT] Appuyez pour alterner entre les modes ANC, Ambiant ou Off (dsactiv). 4. 5. 6. 7. LED dtat Cette LED indique ltat de lappareil : power, autonomie de la batterie, appairage et plus encore. Entre minijack [MC-60BT] Permet une connexion filaire. couteur de droite Faites glisser votre doigt, touchez et/ou maintenez une pression sur lcouteur de droite pour, entre autres, lire/mettre en pause, rpondre un appel/raccrocher, revenir au morceau prcdent/passer au morceau suivant ou monter/dimuner le volume. couteur de gauche [MC-60BT] Placez cet couteur sur la plaque de chargement pour recharger sans fil. Lorsque le casque est en charge, il steint automatiquement. Remarque : Le casque MC-60BT ne peut pas tre utilis avec lentre auxiliaire lors de la charge. Descripciones EN ES FR DE EN ES FR DE Beschreibungen 1. Conector USB C Este conector se usa para la carga de la batera de la unidad. 1. USB C-Port Dieser Anschluss dient zum Laden des Gerts. 2. Corriente / Bluetooth El botn le permite encender y apagar el MC-50BT y MC-60BT. Mantngalo pulsado para conseguir la sincronizacin con un dispositivo Bluetooth durante el encendido.
[MC-50BT] Haga una doble pulsacin para activar el modo de ambiente. 2. Netzschalter / Bluetooth Mit dem Netzschalter wird der MC-50BT und MC-60BT ein- und ausgeschaltet. Halten Sie die Taste gedrckt, um den MC-50BT beim Einschalten mit einem Bluetooth-Gert zu verbinden.
[MC-50BT] Doppeltippen zum Wechseln in den Ambient-Modus. 3. ANC Le permite encender y apagar el ANC. 3. ANC Schaltet den ANC ein/aus.
[MC-60BT] Plselo para filtrar la seal a travs de los modos ANC, Ambiente y Off.
[MC-60BT] Taste drcken, um zu den ANC-, Ambient- & Off-Modi zu wechseln. 4. Piloto LED de estado Este LED indica el estado de la unidad, incluyendo power, 4. Status-LED Diese LED zeigt den Status des Gerts an, einschlielich power, Batteriestand, el nivel de la batera, pareamiento del dispositivo y ms. Gertekopplung und mehr. 5. Toma de entrada de 3,5 mm [MC-60BT] Esta toma permite la conexin con cable. 5. 3,5 mm Eingangsbuchse [MC-60BT] Zum Herstellen einer Kabelverbindung. 6. Casco derecho Deslice, pulse y/o mantenga pulsado el casco derecho para activar la pausa/reproducir, contestar/finalizar llamadas, ir a la pista anterior/siguiente, aumentar/reducir el volumen y ms. 6. Rechte Ohrmuschel Swipen, tippen und/oder halten Sie die rechte Ohrmuschel, um auf Pause/Play zu schalten, Anrufe zu beantworten/beenden, zum vorigen/nchsten Track zu springen, die Lautstrke zu erhhen/verringern und mehr. 7. Casco izquierdo [MC-60BT] Coloque el casco izquierdo sobre la unidad de carga incluida para una recarga inalmbrica. Cuando el auricular se est cargando, se apaga automticamente. Nota: los auriculares MC-60BT no se pueden usar con la entrada auxiliar durante la carga. 7. Linke Ohrmuschel [MC-60BT] Legen Sie die linke Ohrmuschel auf die mitgelieferte Ladestation, um den MC-60BT drahtlos zu laden. Wenn das Headset aufgeladen wird, schaltet es sich automatisch aus. Hinweis: Das Headset MC-60BT kann beim Aufladen nicht mit dem Aux-Eingang verwendet werden. 6 MC-50BT and MC-60BT Wireless Headphones with Wide-Band Active Noise CancellingMC-50BT and MC-60BT Wireless Headphones with Wide-Band Active Noise Cancelling[MC-50BT]
PALM RIGHT EARCUP Momentary Ambient Mode COLOCAR LA PALMA EN EL AURICULAR DERECHO Modo de ambiente momentneo MAIN SUR L COUTEUR DE DROITE Mode ambiant momentan HANDFLCHE AUF RECHTE OHRMUSCHEL Kurzzeitiger Ambient-Modus 2 TAPS Pause/Play Answer/End Calls PULSACIONES Pausa/Reproduccin Contestar/finalizar llamadas APPUYER Pause/Lecture Rpondre un appel/Raccrocher TIPPEN Pause/Play Anrufe annehmen/beenden 3S HOLD Voice Assistant MANTENER PULSADO 3 seg Asistente de voz MAINTENIR 3 S Assistance vocale 3S HALTEN Sprachassistent SWIPE UP Volume Up DESLIZAR HACIA ARRIBA Aumentar volumen GLISSER VERS LE HAUT Monter le volume SWIPE AUFWRTS Lauter SWIPE BACKWARDS Previous Track DESLIZAR HACIA ATRS Pista anterior GLISSER VERS LARRIRE Morceau prcdent SWIPE ZURCK Voriger Track SWIPE FORWARD Next Track DESLIZAR HACIA DELANTE Siguiente pista GLISSER VERS LAVANT Morceau suivant SWIPE VORWRTS Nchster Track SWIPE DOWN = Volume Down DESLIZAR HACIA ABAJO = Reducir volumen GLISSER VERS LE BAS = Baisser le volume SWIPE ABWRTS = Leiser 7 Quick Start GuideQuick Start Guide MC-50BT MC-60BT Getting Started EN ES FR DE Mise en uvre EN ES FR DE 1. Read and understand the Important Safety Instructions on page 2. 1. Lisez les instructions importantes sur la scurit page 4 et assurez-vous de les avoir bien comprises. 2. Connect a smartphone, tablet or computer to the MC-50BT /
MC-60BT via Bluetooth. The Bluetooth connection may disconnect when affected by electrostatic discharge (ESD) or electrical fast transients (EFT). If this occurs, manually reconnect the Bluetooth connection. 3. Your ears are important to us! Be careful of permanent hearing damage. Lower the volume on your device. Even intermediate levels may be painfully loud. Always turn the volume all the way down before connecting the headphones or doing anything new that may affect the headphone volume. Then turn it up slowly as you listen carefully. 4. Place the headphones over your ears. The power button is located on the left (MC-60BT) and right (MC-50BT) headphone. 5. Raise the volume on your device up to a comfortably loud listening level and enjoy!
6. Refer to the owners manual for specific button functionality. 2. Connectez un smartphone, tablette ou une lordinateur au MC-50BT /
MC-60BT en Bluetooth. La connexion Bluetooth peut se dconnecter si elle est soumise des dcharges lectrostatiques (DES) ou des transitoires lectriques rapides (TER). Si cela se produit, rtablissez la connexion Bluetooth manuellement. 3. Vos oreilles sont prcieuses ! Faites attention aux dommages permanents de laudition. Diminuez le volume de votre appareil. Mme un niveau intermdiaire peut tre dangereux. Mettez toujours le volume au minimum avant de connecter vos couteurs ou dagir dune manire pouvant affecter le volume. Montez ensuite le volume progressivement. 4. Placez le casque sur vos oreilles. Le bouton de mise sous tension se trouve sur lcouteur la gauche (MC-60BT) et de droite (MC-50BT). 5. Montez le volume de votre appareil jusqu un niveau dcoute confortable et profitez de votre musique !
6. Consultez le mode demploi pour connaitre les fonctions associes au bouton. Puesta en Marcha EN ES FR DE Erste Schritte EN ES FR DE 1. Lea y tenga en cuenta las Instrucciones importantes de seguridad 1. Lesen und beachten Sie die Wichtigen Sicherheitshinweise de la pgina 3. auf Seite 5. 2. Conecte un smartphone, tablet o ordenador al MC-50BT /
MC-60BT va Bluetooth. En enlace Bluetooth puede desconectarse si se ve afectado por una descarga de electrosttica (ESD) o transitorios elctricos bruscos (EFT). En esos casos, reconecte manualmente el enlace Bluetooth. 3. Sus odos nos importan mucho! Evite una posible sordera crnica. Reduzca el volumen de su dispositivo. Incluso niveles medios pueden llegar a ser dolorosos. Reduzca siempre el volumen al mnimo antes de conectar los auriculares o hacer cualquier cosa que pueda afectar al volumen y despus sbalo lentamente mientras escucha hasta llegar al nivel que quiera. 4. Colquese los auriculares sobre sus odos. El botn de encendido est situado en el auricular izquierdo (MC-60BT) y derecho
(MC-50BT). 5. Suba el volumen del dispositivo emisor hasta llegar a un nivel cmo y disfrute!
6. Consulte el manual de instrucciones para saber la funcionalidad concreta del botn. 2. Verbinden Sie ein Smartphone, Tablet oder Computer ber Bluetooth mit dem MC-50BT / MC-60BT. Die Bluetooth-Verbindung kann durch elektrostatische Entladung (ESD) oder schnelle transiente elektrische Strgren/Burst (EFT) unterbrochen werden. In diesem Fall mssen Sie die Bluetooth-Verbindung manuell wiederherstellen. 3. Ihre Ohren sind uns wichtig! Verringern Sie die Lautstrke am Gert, um dauerhafte Hr schden zu vermeiden. Sogar mittlere Pegel knnen schmerzhaft laut sein. Drehen Sie die Lautstrke immer ganz zurck, bevor Sie die Ohrhrer anschlieen oder etwas Neues ausprobieren, das die Lautstrke beeinflussen knnte. Erhhen Sie den Pegel dann langsam und vorsichtig. 4. Setzen Sie die Kopfhrer auf. Der Netzschalter befindet sich auf der links (MC-60BT) und rechten Ohrmuschel (MC-50BT). 5. Stellen Sie am Gert einen angenehmen Lautstrkepegel ein undgenieen Sie!
6. Die Funktion spezieller Tasten ist im Bedienungshandbuch. 8 MC-50BT and MC-60BT Wireless Headphones with Wide-Band Active Noise CancellingMC-50BT and MC-60BT Wireless Headphones with Wide-Band Active Noise Cancelling Applications Aplicaciones Applications Anwendungen Conference Call Audioconferencia Confrence tlphonique Web-Konferenz Traveling Viaje Voyage Reisen Walking / Running / Working Out Andando / corriendo / trabajo Marche / Course pied / Entrainement Walking / Running / Workout Gaming Videojuegos Jeux vido Gaming 9 Quick Start GuideQuick Start Guide Technical Specifications Especificaciones tcnicas Caractristiques techniques Technische Daten MODEL MODELO MODLE MODELL Driver Type Tipo de cabezal Type de HP Treibertyp Frequency Response Respuesta de frecuencia Rponse en frquence Frequenzgang IPX Rating Medicin IPX Indice IPX IPX Klasse Bluetooth MC-50BT MC-60BT 40 mm 20 Hz 20 kHz IPX4 5.0 Bluetooth Profiles Perfiles Bluetooth Profiles Bluetooth Bluetooth Profile A2DP 1.3.2, AVCTP 1.4, AVRCP 1.6.2, GAVDP 1.3, HFP 1.7.2, IOPT A2DP V1.3.2, AVRCP V1.6.2, GAVDP V1.3, HFP V1.7.2, HSP V1.2 Bluetooth Audio Codec Cdec Audio Bluetooth Codec audio Bluetooth Bluetooth Audio Codec Bluetooth Range Rango de Bluetooth Porte Bluetooth Bluetooth-Reichweite ANC Type Tipo ANC Type dANC ANC Typ AAC, SBC AAC, SBC, APTX, APTX HD 10m / 33'
Mackie MIS Wide-band Working Time Tiempo de funcionamiento Autonomie Betriebszeit Charging Time Tiempo de carga Dure de chargement Ladezeit Charging Input Voltage Voltaje de entrada de carga Tension de chargement Ladeeingangsspannung 40 hours (music) 34 hours (music and ANC on) 40 horas (msica) 34 horas (msica y ANC activado) 40 heures (musique) 34 heures (musique et ANC) 40 Std (Musik) 34 Std (Musik und ANC ein) 32 hours (music) 30 hours (music and ANC on) 32 horas (msica) 30 horas (msica y ANC activado) 32 heures (musique) 30 heures (musique et ANC) 32 Std (Musik) 30 Std (Musik und ANC ein) 3 hours 3 horas 3 heures 3 Stunden 3 hours (USB-C) 5 hours (wireless) 3 horas (USB-C) 5 horas (inalmbrico) 3 heures (USB-C) 5 heures (sans fil) 3 Stunden (USB-C) 5 Stunden (drahtlos) 5V Wireless charging Carga inalambrica Chargement sans fil Kabelloses Laden Battery Technology Tecnologa de la batera Technologie de la batterie Batterietechnologie Size (H x W x D) Tamao (A x L x P) Dimensions (H x L x P) Abmessungen (H x B x T) Weight Peso Poids Gewicht 10W Max. / mxima 850mAh 1.9 x 7.7 x 6.8 in 48 x 196 x 173 mm 0.5 lb 0.2 kg 2.1 x 7.9 x 7.2 in 53 x 201 x 183 mm 0.6 lb 0.3 kg All specifications subject to change Todas estas especificaciones estn sujetas a cambios sin previo aviso Les caractristiques peuvent tre modifies Technische nderungen und Ergnzungen vorbehalten 10 MC-50BT and MC-60BT Wireless Headphones with Wide-Band Active Noise CancellingMC-50BT and MC-60BT Wireless Headphones with Wide-Band Active Noise Cancelling EN ES FR DE WARRANTY AND SUPPORT Visit WWW.MACKIE.COM to:
Identify WARRANTY coverage provided in your local market. Please keep your sales receipt in a safe place. Retrieve a full-version, printable OWNER'S MANUAL for your product. DOWNLOAD software, firmware and drivers for your product (if applicable). REGISTER your product. CONTACT Technical Support. EN ES FR DE GARANTA Y SOPORTE TCNICO Visite la pgina web WWW.MACKIE.COM para:
Conocer la cobertura en periodo de GARANTA correspondiente a su pas. Le recomendamos que conserve su recibo de compra o factura en un lugar seguro. Conseguir una versin completa e imprimible del MANUAL DE INSTRUCCIONES de este aparato. DESCRGUESE lo ltimo en software, firmware y drivers para este producto (cuando sea aplicable). REGISTRAR este aparato. PONERSE EN CONTACTO con el departamento de soporte tcnico. EN ES FR DE GARANTIE ET ASSISTANCE TECHNIQUE Consultez WWW.MACKIE.COM pour:
Connatre la couverture de la GARANTIE dans votre rgion. Merci de conserver vos factures dans un lieu sr. Rcuprer une version complte imprimable du MODE DEMPLOI de votre appareil. TLCHARGER le logiciel, le firmware et les pilotes de votre produit (le cas chant). ENREGISTRER votre produit. CONTACTER le dpartement dassistance technique. EN ES FR DE GARANTIE UND SUPPORT Besuchen Sie WWW.MACKIE.COM, um:
Die GARANTIE-Bedingungen fr Ihr Land zu finden. Bitte bewahren Sie Ihren Kaufbeleg gut auf. Ein ausfhrliches druckbares BEDIENUNGSHANDBUCH fr Ihr Produkt zu finden. Software, Firmware und Treiber fr Ihr Produkt (falls anwendbar) HERUNTERZULADEN. Ihr Produkt zu REGISTRIEREN. Den Technischen Support zu KONTAKTIEREN. www.mackie.com 19820 NORTH CREEK PARKWAY #201 BOTHELL, WA 98011 USA Phone: 425.487.4333 Toll-free: 800.898.3211 Fax: 425.487.4337 Part No. 2055284 Rev. E 09/22 2022 LOUD Audio, LLC. All Rights Reserved. Hereby, LOUD Audio, LLC declares that the radio equipment type [MC-50BT/MC-60BT] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity and Bluetooth conformity are available at the following internet address:
https://mackie.com/en/support/drivers-downloads?folderID=27309
1 | External photos | External Photos | 870.45 KiB | November 03 2022 / April 24 2023 | delayed release |
1 | Label and label location | ID Label/Location Info | 1.70 MiB | November 03 2022 |
L001-BN94938 3 A S-Lid Wwe: ESAAB#P MADE IN CHINA FCC ID: 2AD4XMC60BT IC: 12714A-MC60BT IPX4 WATER RESISTANT CMIIT ID:
C ca @
Placement on headband LEFTSIDE INNER cover MADE IN CHINA FCC ID: 2AD4XMC60BT IC: 12714A-MC60BT IPX4 WATER RESISTANT CMIIT ID:
CE ca @
Silkscreen INK:
Pantone Process Black 21.66 mm 12.25 mm 254mm (10.00" *.002) UNLESS OTHERWISE SPECIFIED PART NO: ow DIMENSIONS ARE IN MILLIMETERS XXXXXXK L U D DIMENSIONS AND TOLERANCES ARE ARTWORK NO. IN ACCORDANCE WITH ASME Y14.5-1994 AW2678 Audio, LLC MATERIAL: DRAWN BY. 16220 WOOD-RED RD NE, WOODINVILLE, WA 98072 (425) 487-4333 FILM POSITIVE KENT S. DATE:
COLOR/FINISH: 5472022 AW MC-60BT SEE NOTES Blueowl project REV:
Aoo THE INFORMATION CONTAINED HEREIN IS PROPRIETARY AND CONFIDENTIAL SHEET:
DO NOT SCALE DRAWING PROPERTY OF LOUD AUDIO LLC, ALL RIGHTS RESERVED 1OF1 CHANGE#:
ECOWD22034 LEFT INNER HEADBAND View on product: not to scale LOO1-BN94974 4 Site LAY RIL Fe FAS BEE: E RAG e+
Silkscreen INK:
Pantone Process Black 3.702 mm MC-GOBT 15.615 mm REVISIONS AOO RELEASE DESCRIPTION DATE 12/08/2022 REV. BY KENT S.
| LEFT INNER HEADBAND W View on product: not to scale View on product: not to scale both left and right side use the same sikscreen
1 | Antenna specification | Cover Letter(s) | 2.11 MiB | November 03 2022 |
8010 Chip antenna For Bluetooth / WLAN Applications P/N:8010F245M01 Dimension (mm) 8.11 0.20 1.03 0.20 1.25 0.20 L W T RAIN International Technology Co., Ltd.
: 13530576606 TEL: 13530576606 1 11 Part Number Information RAIN 8010 A B F C 245 M E D 01 F Product Series Dimension L x W Material A B C D Working Frequency E F Feeding mode Antenna type Antenna 8.0X1.0mm (+-0.2mm) High K material 2.4 ~ 2.5GHz Monopole & Single Feeding Type=01 1. Electrical Specification Specification Part Number 8010F245M01 Central Frequency Bandwidth Return Loss Peak Gain Impedance Operating Temperature Maximum Power 2450 100 (Min.)
-10 (Max) 3.45 50
-40+85 4 Resistance to Soldering Heats 10 ( @ 260) Polarization Azimuth Beamwidth Termination Linear Omni-directional Cu / Sn (Leadless) Remark : Bandwidth & Peak Gain was measured under evaluation board of next page MHz MHz dB dBi Ohm W sec. 2 11 2. Recommended PCB Pattern Evaluation Board Dimension Unit : mm Suggested Matching Circuit 3 11 Layout Dimensions in Clearance area( Size=10.0*5.0mm) 50 ohm transmission Line Matching Circuit Layout Dimensions in Clearance area( Size=10.0*3.0mm) 50 ohm transmission Line Matching Circuit FootPrint
(Unit : mm) 4 11 3. Measurement Results Return Loss 5 11 Radiation Pattern Y X Z Efficiency Peak Gain Directivity 2400MHz 69.13 %
3.39 dBi 5.53 dBi 2450MHz 74.79 %
3.45 dBi 5.20 dBi 2500MHz 65.65 %
2.75 dBi 5.14 dBi Chamber Coordinate System 6 11 Radiation Pattern Y X Z 7 11 4.Reliability and Test Condictions ITEM Solderability REQUIREMENTS 1. Wetting shall exceed 90% coverage 2. No visible mechanical damage TEMP () 230 150 41 sec. 60sec Solder heat Resistance 1. No visible mechanical damage 2. Central Freq. change :within 6%
TEMP () 260 150 100.5 sec. 60sec 1. No visible mechanical damage 1. No visible mechanical damage Component Adhesion
(Push test) Component Adhesion
(Pull test) Thermal shock 1. No visible mechanical damage 2. Central Freq. change :within 6%
Phase 1 2 3 4 Temperature()
+855 Room Temperature
-402 Room Temperature Time(min) 303 Within 3sec 303 Within 3sec Resistance to High Temperature 1. No visible mechanical damage 2. Central Freq. change :within 6%
3. No disconnection or short circuit. Resistance to Low Temperature 1. No visible mechanical damage 2. Central Freq. change :within 6%
3. No disconnection or short circuit. Humidity 1. No visible mechanical damage 2. Central Freq. change :within 6%
3. No disconnection or short circuit. TEST CONDITION Pre-heating temperature:150/60sec. Solder temperature:2305 Duration:41sec. Solder:Sn-Ag3.0-Cu0.5 Flux for lead free: rosin Pre-heating temperature:150/60sec. Solder temperature:2605 Duration:100.5sec. Solder:Sn-Ag3.0-Cu0.5 Flux for lead free: rosin The device should be reflow soldered(2305 for 10sec.) to a tinned copper substrate A dynometer force gauge should be applied the side of the component. The device must with-ST-F 0.5 Kg without failure of the termination attached to component. Insert 10cm wire into the remaining open eye bend ,the ends of even wire lengths upward and wind together. Terminal shall not be remarkably damaged.
+85=>303min
-40=>303min Test cycle:10 cycles The chip shall be stabilized at normal condition for 2~3 hours before measuring. Temperature: 855 Duration: 100012hrs The chip shall be stabilized at normal condition for 2~3 hours before measuring. Temperature:-405 Duration: 100012hrs The chip shall be stabilized at normal condition for 2~3 hours before measuring. Temperature: 402 Humidity: 90% to 95% RH Duration: 100012hrs The chip shall be stabilized at normal condition for 2~3 hours before measuring. 8 11 5.Soldering and Mounting Mildly activated rosin fluxes are preferred. The minimum amount of solder can lead to damage from the stresses caused by the difference in coefficients of expansion between solder, chip and substrate. The terminations are suitable for all wave and re-flow soldering systems. If hand soldering cannot be avoided, the preferred technique is the utilization of hot air soldering tools. Reflow Soldering PRE-HEATING SOLDERING 10s max. NATURAL COOLING 250~260 230 180 150
) C
E R U T A R E P M E T 60~120 s 30~60s Iron Soldering PRE-HEATING SOLDERING within 3s NATURAL COOLING 350 300 150
) C
E R U T A R E P M E T TIME(sec.) TIME(sec.) Over 60s Gradual cooling Recommended temperature profiles for re-flow soldering in Figure 1. Products attachment with a soldering iron is discouraged due to the inherent process control limitations. In the event that a soldering iron must be employed the following precautions are recommended. Preheat circuit and products to 150 Never contact the ceramic with the iron tip Use a 20 watt soldering iron with tip diameter of 1.0mm 280 tip temperature (max) 1.0mm tip diameter (max) Limit soldering time to 3 sec. 9 11 6.Packaging Information Tape Specification:
W 16.0 0.30 Ao 1.30 0.10 Bo 8.30 0.10 Ko 1.40 0.10 P 4.00 0.10 F 7.50 0.10 E 1.75 0.10 D 1.50 0.10 D1 0.00 0.10 Po 4.00 0.10 P2 2.00 0.10 t 0.30 0.05 Reel Specification: (7, 180 mm) Tape Width(mm) A(mm) B(mm) C(mm) D(mm) Chip/Reel(pcs) 16 161.0 602 13.50.5 1782 3000 10 11 7.Storage and Transportation Information Storage Conditions To maintain the solderability of terminal electrodes:
1. Temperature and humidity conditions: -10~ 40 and 30~70% RH. 2. Recommended products should be used within 6 months from the time of delivery. 3. The packaging material should be kept where no chlorine or sulfur exists in the air. Transportation Conditions 1. Products should be handled with care to avoid damage or contamination from perspiration and skin oils. 2. The use of tweezers or vacuum pick up is strongly recommended for individual components. 3. Bulk handling should ensure that abrasion and mechanical shock are minimized. 11 11
1 | FCC Authority to Act as Agent | Cover Letter(s) | 95.89 KiB | November 03 2022 |
LOUD Audio, LLC 19820 North Creek Parkway #201, Bothell, Washington 98011-8227, United States DATE : 2022-10-18 LOUD Audio, LLC 19820 North Creek Parkway #201, Bothell, Washington 98011-8227, United States Attn: Director of Certification Authority to Act as Agent On our behalf, I appoint below company and person: Name Damon Hu Position Manager Company Name Dongguan Dongdian Testing Service Co.,Ltd. Address 17, Zongbu Road 2, Songshan Lake Sci&Tech, Industry Park, Dongguan City, Guangdong Province, China, 523808 Tel / Fax Tel: +86-0769-38826678-850 E-Mail Damon_hu@dgddt.com to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commissions regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by CETECOM GmbH, still resides with: Applicant name LOUD Audio, LLC Address 19820 North Creek Parkway #201, Bothell, Washington 98011-8227, United States Yours sincerely, Signatory Name Kenny Sheng Position Sr. Manager of SQE Company Name LOUD Audio, LLC Address 19820 North Creek Parkway #201, Bothell, Washington 98011-8227, United States Tel / Fax 86-0755-88351509 Extension:112 / 425-487-4337 E-Mail kenny.sheng@loudaudio.com
1 | FCC Confidentiality request letter | Cover Letter(s) | 107.57 KiB | November 03 2022 |
CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 <10/18/2022> TO WHOM IT MAY CONCERN Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b) (4) of the Freedom of Information Act, we request confidentiality for the following products: FCC ID: 2AD4XMC60BT Model name: MC-60BT For the product stated above, we request that the following information be held confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos 180 days Internal Photos 180 days Block Diagram Schematics Test Setup Photos 180 days Users Manual 180 days Parts List Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, (Signed) Name: Kenny Sheng Company: LOUD Audio, LLC Address: 19820 North Creek Parkway #201, Bothell, Washington 98011-8227, United States Phone: 86-0755-88351509 Extension:112 Fax: 425-487-4337 E-Mail: kenny.sheng@loudaudio.com
1 | SAR Test report for BT-Appendix A-System Validation Plots | RF Exposure Info | 246.05 KiB | November 03 2022 |
1 | SAR Test report for BT-Appendix B-Highest Test Plots | RF Exposure Info | 240.65 KiB | November 03 2022 |
1 | SAR Test report for BT-Appendix C-Calibration Certification | RF Exposure Info | 4.48 MiB | November 03 2022 |
1 | Test setup photos for RF | Test Setup Photos | 349.75 KiB | November 03 2022 / April 24 2023 | delayed release |
1 | Test setup photos for SAR | Test Setup Photos | 316.72 KiB | November 03 2022 / April 24 2023 | delayed release |
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2022-11-03 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2022-11-03
|
||||
1 | Applicant's complete, legal business name |
LOUD Audio, LLC
|
||||
1 | FCC Registration Number (FRN) |
0022261655
|
||||
1 | Physical Address |
19820 North Creek Parkway #201
|
||||
1 |
Bothell, WA
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
t******@cetecom.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2AD4X
|
||||
1 | Equipment Product Code |
MC60BT
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
K******** S******
|
||||
1 | Title |
Sr. Manager of SQE
|
||||
1 | Telephone Number |
86-07******** Extension:
|
||||
1 | Fax Number |
425-4********
|
||||
1 |
k******@loudaudio.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 04/24/2023 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless Headphones with Wide-Band Active Noise Cancelling | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output power listed is peak conducted. The highest reported SAR for head and extremity exposure conditions are <0.1W/Kg and <0.1W/Kg, respectively. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Dongguan Dongdian Testing Service Co., Ltd.
|
||||
1 | Name |
M**** Y******
|
||||
1 | Telephone Number |
+86-0********
|
||||
1 |
j******@dgddt.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0024300 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC