FCC ID: QY6NEO-4005LS LCD TV & MONITOR

NEOVIA 40LCD TV OWNERS INSTRUCTION FCC NOTE

:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND

(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED UNAUTHORIZED MODIFICATIONS SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. EQUIPMENT. THIS TO E N G L I S H 40LCD TV OWNERS INSTRUCTION NEOVIA TABLE OF CONTENTS WARNING IMPORTANT SAFETY INSTRUCTIONS SAFETY PRECAUTIONS SUPPLIED ACCESSORIES PRECAUTION ON BATTERY USE OVER-VIEW Remote Control Front Panel Rear Connection CONNECTING TO DEVICE Connecting to TV Connecting to CABLE TV / VCR Connecting to SCART Connecting to HDMI Connecting to another output source Connecting to external speaker Connecting to PC SETTING TV Setting Source Setting Source Selection OSD CONTROL Picture Image Adjustment Set Up Audio Setting FAQ / TROUBLESHOOTING SPECIFICATIONS 4 5 6 7 7 8 8 9 10 10 11 12 13 13 14 15 17 19 21 22 23 24 25 27 3 NEOVIA 40LCD TV OWNERS INSTRUCTION WARNING Shock Hazard Marking and Associated Graphical Symbol E N G L I S H CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Explanation of Safety Related Symbol CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol is intended to alert the user to the presence of uninsulted dangerous voltage within the products enclosure that may be of sufficient magnitute to constitude a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance. WARNING -

To reduce the risk or fire or electric shock. Do not expose this apparatus to rain or moisture. To preserve the environment, do not rubbish. 4 40LCD TV OWNERS INSTRUCTION NEOVIA IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. E N G L I S H 6) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 7) Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 8) Only use the attachments/accessories specified by the manufacturer. 9) Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 10) Unplug this apparatus during lightening storms or when unused for long periods of time. 11) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 5 NEOVIA 40LCD TV OWNERS INSTRUCTION SAFETY PRECAUTIONS E N G L I S H Warranty To guard against injury, the following basic safety precautions should be observed in the installation, use and servicing of the set. Power Sources This set should be operated only from the type of power source indicated on the serial label. If you are not sure of the type of electrical power supplied to your home, consult your dealer or local power company. Wall Outlet Do not use a poor fitting outlet. Insert the plug fully into the outlet. If it is loose, it may cause arcing which result fire. Moisture Do not handle the TV set with wet hands as it could damage the TV set and it may cause electric shock as well as fire. Cleaning Be sure to unplug the TV unit before cleaning. To minimize contact with the front of the screen surface, use dry soft cloth when cleaning front of the screen. Do not use alcohol, benzine, thinner etc., as it damages the coating. Should use commercially available chemical fibre cleaning cloths in accordance with their supplied instructions. Ventilation Holes The slots and opening holes in the TV set are provided for necessary ventilation. To insure the reliable operation of the set, and to protect from overheating, the holes and openings must never be blocked or covered. Unless proper ventilation is provided, the unit may gather dust and get dirty. For proper ventilation, observe the followings:

Do not store the unit turned backwared or sideways. Do not store the unit turned face down or upside down. Never cover the slots and opening with a cloth or other materials as this prevents ventilation holes. Never store the unit on soft surface. Never place the unit in a confined space, such as bookcase or built in cabinet, unless proper ventilation is provided. Do not place the unit near or over the radiator or exposed to direct sunlight. 6 40LCD TV OWNERS INSTRUCTION NEOVIA SUPPLIED ACCESSORIES Check the accessories before installation. E N G L I S H Operation Instruction Remote Control Power Cable SCART Cable Manual Batteries for the Remote Controller (2 x AAA Size) PRECAUTION ON BATTERY USE Requires two AAA batteries. 1. Open the battery cover 2. Install the batteries to the correct polarity (+and-) 3. Replace the cover Incorrect installation can cause battery leakage and corrosion that will damage the remote controller 1. Always use new batteries when replacing the old set. 2. Do not attempt to charge, shot-circuit, disassemble, heat or burn used batteries 3. Battery replacement is necessary when the remote control acts sporadically or fails to operate this unit. NOTES:

Do not drop, apply shock to step on the remote controller. Do not spill water on the remote controller. Do not place objects between the remote control sensor and remote controller. Do not use remote controller for other equipment at the same time. If the TV does not operate even when using the remote controller from a close range, it is time to replace the batteries. 7 NEOVIA 40LCD TV OWNERS INSTRUCTION E N G L I S H OVER-VIEW Remote Control POWER To turn ON/OFF the PICTURE ADD/DEL To add and delete channels that was stored in the searched channels. SOUND AND PICTURE MODE To change the audio and pciture settings PICTURE MODE NEWS NORMAL SOFT USER. AUDIO MODE MOVIE NORMAL MUSIC NEWS USER. VOLUME UP / DOWN SLEEP To set the timer when to turn the screen off. MUTE Temporarly turn the sound off/on ENTER To confirm the changes that user has made. MENU Display on screen display (OSD) AUTO/Red key(TTX) Analog RGB auto adjust function MTS/Green Key(TTX)

(Multichannel television sound) Hot key to listen to the TV in secondary channel if it is transmitted by broadcasting station. Internal speaker On/OFF. SPK/Yellow key (TTX) SRND/Blue key(TTX) Surround sound On/OFF(option). Picture Viewing Controls (option) P-LEFT Selection Left Control function. P-UP Selection Up Control function. P-RIGHT Selection Right Control function P-DOWN Selection Down Control function P-SEL Confirm the selection. P-MENU Picture Viewer On Screen Display Front Panel SOURCE To change the Display Source SOURCE QUICK KEY HOT KEYS for changing the Display Source HD1 HD 2 Analog RGB DVI S-Video Composite Video 1 Composite Video 2 TV NUMERICAL KEYPAD LAST Used in TV mode to return to previous Channel. CHANNEL UP/DOWN FREEZE To temporally freeze the current picture shown on the Screen. ASPECT To Alter Viewing Ratio of the Display. Normal WIDE FILL ALL ZOOM CURSOR CONTROL To move the Cursor, Up/Down, Left/Right within the OSD (ON SCREEN DISPLAY) MENU EXIT To Exit Instantly from the OSD MENU TTX MIX OFF, when in Teletext mode, above four buttons function as color buttons for the Teletext. INDEX Teletext Index Key. LANG Change the OSD Language. AUDIO Primary Secondary, to change the audio output from Primary to Secondary only available when it is in PIP and POP mode only. LAYOUT MAIN PIP PBP POP3 POP 5 To change the Display setting. POS Change the position of the PIP s secondary picture. RESIZE To change the size of the PIP s secondary picture SWAP To swap the picture s between primary and secondary picture (only available when the display is in PIP and PBP) POWER Turn Picture ON/OFF CHANNEL / CURSOR UP / DOWN Change Channel UP / DOWN When in OSD to move Cursor Up/ Down VOLUME UP / DOWN Volume Increase / Decrease When in OSD to move Cursor Left / Right TV / AV Change the Source for Displaying MENU Displaying OSD (ON SCREEN DISPLAY) 8 40LCD TV OWNERS INSTRUCTION NEOVIA Rear Connection View of the Rear Connection Ports Service Port S/PDIF OUT (Option) SCART2 SCART1 / Decoder S-VIDEO Composite Video OUT TV ANTENNA E N G L I S H POWER Analog RGB DVI HDMI A.RGB/DVI SOUND S-VIDEO SOUND IN SOUND OUT The Rear View Earphone Sound Out Video Ext. IN Sound Ext. IN As shown above rear connection ports are classified into two ports(SCART 1 and SCART 2). Each port is capable of receiving from Composite Video/Video and HD/Component (upto 1080i). SCART 1 is for the connection with TV decoder like CANAL+ and SCART 2 is for the connection with other video decoders like DVD Player. Next pages will explain the various connections that are possible. There are only one input for analog RGB, DVI, HDMI and S-Video has separate sound input port. On the left hand side of rear view there is external video input port for easy connection to other input devices such as camcorder etc. 9 NEOVIA 40LCD TV OWNERS INSTRUCTION CONNECTING TO DEVICE Connecting to TV E N G L I S H To watch the terrestrial TV connect the antenna cable to the far right port at the back of the LCD TV. Connecting to CABLE TV / VCR N.B because this TV is capable of inputing two SCART connectors i.e. Composite Video, HD / Component. the diagram is shown for one cases only, however user has option to connect to all the Input if they require. The following connections shows the possible of connecting DVD, VCR, satellite set top boxes and other various input. 10 40LCD TV OWNERS INSTRUCTION NEOVIA Connecting to SCART E N G L I S H S-VIDEO FROM VCR Connect cable by its defined names For S-VIDEO input the TV has separate sound in hance please check if your SET TOP BOX or DVD etc has sound out for S-VIDEO. TV OUT ANTENNA IN R L VIDEO SCART S-VIDEO SET TOP BOX or VCR or DVD External DECODERS TV-IN S-VIDEO ANTENNA IN By connecting SCART connection, this TV is capable of accepting HD / Component, S-Video, Composite Video and sound from the one SCART connector. If your external is capable of all these input with one scart cable then only one connector is needed for various inputs. 11 NEOVIA 40LCD TV OWNERS INSTRUCTION Connecting to HDMI E N G L I S H HDMI (High Definition Multimedia Interface) is the first all digital consumer electronics A/V interface that supports high quality picture and sound without compressing high resolution video. The HDMI terminal supports both video and audio information. This is achieved by connecting EIA/CEA-861/861B compliant consumer electronics device, such as set top box or DVD player with HDMI or DVI output (adapter required) to the HDMI input terminal. Connect a HDCP

(high bandwidth digital content protection) source to TVs HDMI terminal, to display high-definition pictures without compression of video in digital form. HDMI IN For DVI out connect the sound using the appropriate RCA to headphone adapter. S/PDIF OUT (Option) to Audio Decoder SET TOP BOX or VCR or DVD External DECODERS HDMI Notes;

Make sure that the power of the LCD TV is turned off before connection to RGB, DVI and HDMI. If the external device has DVI output only, use a DVI to HDMI adapater cable to connect to the HDMI Terminal. In this case two channel audio needs to be connected to PC RGB/DVI audio using an adapter. This TV is Compatible with the following No. of Dots (H X V) Vertical Scanning Feq (Hz) 1080i 720P 576P 480P 576i 1920 x 1080i 1280 x 720P 720 x 576P 640 x 480P 720 x 576i This input terminal is not intended for use with computers. 50 50 50 50 50 Compatible audio sampling frequency

(LPCM): 48kHz / 44.1 kHz / 32 kHz.h Notes:

This HDMI connector is type A. and High-Definition Multimedia Interface are trademarks or registered tradmarks of HDMI Licen-

sing LLC. EIA/ CEA-861/861B profiles compliance covers profiles for transmission of uncompressed digital video including HDCP (high bandwidth digital content protection). For HDMI-DVI conversion cable or an adapter consult your customer electronics dealer for availability details. 12 40LCD TV OWNERS INSTRUCTION NEOVIA Connecting to another output source E N G L I S H VIDEO OUT SOUND OUT Video Out is used to display the input sources of this LCD TV to another display screen. Only TV and Composite Video sources can be displayed. If the LCD TV in Multi window mode (PIP, POP 3, POP 5), Video Out outputs to another display what is shown in the main screen. Connecting to external speaker S/PDIF OUT

(Option) To external 2 channel amplifier Connect to external amplifier for louder and perfered speakers. S/PDIF out is only vaild for HDMI only (option) 13

NEOVIA Connecting to PC 40LCD TV OWNERS INSTRUCTION E N G L I S H Analog RGB DVI PC AUDIO in Connect the cables as shown above and make sure that both PC and the LCD TV is turned off for precautions. Please note that especially DVI cables should be connected when the power has been turned off. 14 SETTING TV SETTING 40LCD TV OWNERS INSTRUCTION NEOVIA E N G L I S H Press the MENU button Press left cursor to select TV Press down cursor to select functions within TV menu Press right / left cursor to change the settings Press MENU or ENTER to save Press MENU to escape OSD. ACCESS TV Adjust the chosen function. Press ENTER to Save. Press EXIT to turn the OSD Off. This is the general TV Setting which is shown when selecting TV in the on screen display (OSD). AUTO SETTING COUNTRY : Attuned the TV for that particular country, for correct searching of the channels. AUTO SEARCH : When press Right in the remote or VOL Right button in the front of the TV, the TV automatically searches all the available channels that can be displayed. PROGRAM TABLE : Lists all the available channels that has been searched. MANUAL SETTING PROGRAM: Refer to the table of numbers in the program table. FINE TUNE: To make small adjustments for tuning individual stations. CHANNEL: Displays the channel currently shown on the display. Note : Even though channel number has been changed, the program number does not change. The user can set the channel number and store to the program number in this section. Please note that there is no manual searching for this LCD TV STANDARD : Shows the TV standard that it has been set. LABEL : User changable labels for that particular channel. AUDIO MODE : To change the sound system used for a program channel.

(If the station is sending alternative sound to that particular program then this TV is capable of receiving and playing that sound). STORE : Press right cursor in the remote or VOL Right to store currently changed settings. 15 NEOVIA 40LCD TV OWNERS INSTRUCTION E N G L I S H ADD / DEL To Add and/or Del channels in the program table Cursors To move to desired position If in another source, press TV to select TV LAST To return to previous channel. This is the general TV setting which is shown when selecting TV in the on screen display (OSD). When turning on for the first time, the TV should be set in order to receive reception. For NTSC the channels are preset to all the channels from channel 2 to channel 99. For other areas the channels (SECAM / PAL), needs to be searched before TV is tunned to areal reception. For tunning for the first time. 1. First, country needs to be selected before auto searching is enabled. This is also need to be set first in order to set the tuner according to each countries standards. 2. Once the country has been set then auto search can begin. 3. Move the cursor to auto search channels and begin auto searching. 4. LCD TV then will start searching for all the available channels. 5. Once all the channels have been searched these are stored in the program table. 6. All the channels can be fine tuned. 7. All the channel names can be edited to suit individuals who likes to change the labels for their purposes. 8. Once all the setting has been completed press enter to save and press exit to leave the OSD. 16 40LCD TV OWNERS INSTRUCTION NEOVIA SOURCE SETTING Press the MENU button. Press left cursor to select SOURCE. Press down cursor to select functions within SOURCE menu. Press right / left cursor to change the settings. Press MENU or ENTER to save. Press MENU to escape OSD. ACCESS SOURCE. Adjust the chosen function. Press ENTER to save. Press EXIT to turn the OSD Off. E N G L I S H This is the general SOURCE layout which can be seen when selecting SOURCE in the on screen display (OSD). LAYOUT Selecting various display out modes Single Main Picture separate Picture (POP3) Main Picture with 5 small Picture (POP5). Picture in Picture(PIP) Picture By Picture(PBP) Main Picture with 3 small WINDOW LAYOUT (DEFINITION) This LCD TV has capable of showing multiple pictures in one display screen. The various window layout possible for this LCD TV is defined. MAIN SOURCE It displays what is the main source modes when in single, POP3 and POP5 picture or the left of the screen when in picture by picture. SECONDARY SOURCE It displays the secondary source modes when in single, POP3 and POP5 picture or the right of the screen when in picture by picture. MAIN WINDOW:

Only one source is used to display it . PBP:(Picture By Picture) Here two separate screen shown in LCD TV 17 PIP:(Picture In Picture) Here main picture is shown with another picture shown in small screen. POP3:(Picture On Picture) Here main screen with three small pictures from source NEOVIA 40LCD TV OWNERS INSTRUCTION POP5:(Picture On Picture) Here main screen with five small picture from one source E N G L I S H Once the multi display has been chosen, main window source and secondary window source need to be selected. LAY OUT

(Hot Key) Position(Hot Key) To change the position of the secondary picture in PIP Resize(Hot Key) To change the size of secondary picture Once the layout is changed user has to set two sources to display for all case other then the main screen. There is a hot key provided within the remote control that user can quickly access this function. PIP (Picture in Picture) Using either the hot key in the remote or access through OSD user can change the size, the postion of the secondary picture and the audio sound out between secondary and primary audio. PIP Positioning. Press POS button in the remote control to change the placement of the secondary picture. Secondary Window Primary Window PIP Resizing Select secondary picture until green border is lit around secondary picture and press RESIZE and then left and right control to change the secondary picture size. Press resize to show the border around secondary picture Press the right cursor to change the size of the display. Pressing audio in the remote control change the sound output of the speakers from primary to secondary. This audio button works for PIP and PBP.

* If there is no signal for PIP, the size and position of PIP window is not changable. 18 40LCD TV OWNERS INSTRUCTION NEOVIA SOURCE SELECTION E N G L I S H SRC(Source) Press the source button to select the source to be displayed on the main screen. Cursor Use it to select the desired source. This screen is displayed when SOURCE button is pressed. The display above is shown when the SOURCE button has been pressed by either remote control or SOURCE button from the OSD. The source selection displays all the inputs that it can be displayed, if connected. Use the up / down cursor to move the cursor to desired source and press enter to select the source. When SCART 1 is connected to the LCD TV, the corresponding SOURCE is automatically detected and shown. Same as, SCART 2 also detects the corresponding SOURCE directly. To manually goes to the corresponding SOURCE, Select TV if the source of SCART 1 is SCART-Composite and select HD 1 if the source of SCART 1 is SCART-RGB/HD. Select VIDEO 2 if the source of SCART 2 is SCART-Composite and select HD 2 if the source of SCART 2 is SCART-RGB/HD. 19 NEOVIA 40LCD TV OWNERS INSTRUCTION E N G L I S H PC RESOLUTION The list below shows the resolutions that are currently supported by LCD TV. If the signals from PC differes from the list below then screen might be out of size or may not show at all. Please check to set your video card correctly and make sure that your video driver is the latest. Mode Resolution Horizontal Frequency

(kHz) Vertical Frequency

(Hz) Pixel Clock Frequency

(MHz) Sync Polarity

(H/V) MAC MAC S-VGA S-VGA XGA VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA 640 X 480 1024 X 768 800 X 600 800 X 600 1024 X 768 640 X 480 640 X 480 720 X 400 800 X 600 800 X 600 800 X 600 1024 X 768 1024 X 768 1024 X 768 1360 X 768 35.00 60.24 48.08 46.88 56.48 37.86 37.50 37.927 35.16 37.88 48.08 48.36 56.48 60.02 47.712 66.67 74.93 72.19 75.00 70.07 72.81 75.00 85.039 56.25 60.32 72.19 60.00 70.07 75.03 60.015 30.24 80.00 50.00 49.50 75.00 31.5 31.5 35.5 36.0 40.0 50.0 65.0 75.0 78.75 85.5

- / -

- / -

- / -

- / -

- / -

- / -

- / -

- / +

+ / +

+ / +

+ / +

- / -

- / -

+ / +

+ / +

* The interlace mode is not supported.

* The set might operate abnormally if a non-standard video format is selected.

* For correct display it is recommended to set the resolution at 1360 x 768 at 60Hz Make sure that your graphic card can support VESA 1360x768@60 standard before selecting this resolution. 20 OSD CONTROL PICTURE 40LCD TV OWNERS INSTRUCTION NEOVIA E N G L I S H Press the MENU button. Press left cursor to select PICTURE. Press down cursor to select functions within PICTURE menu. Press right / left cursor to change the settings. Press MENU or ENTER to save. Press MENU to escape OSD ACCESS PICTURE. Adjust the chosen function. Press ENTER to save. Press EXIT to turn the OSD Off. This is the general picture layout which can be seen when selecting PICTURE in the on screen display (OSD). The Picture quality settings can be made in this menu. From changing simple brightness to the color temperature to reproduce the pictures as what user wants. Any changes can effect the display of the picture on the screen. MODE : There are four presets and a setting for the user. The presets are MOVIE , SOFT, SHARP, NORMAL and USER. BRIGHTNESS : More properly called BLACK LEVEL. It adds or subtracts an offset, or bias, into the red, green, and blue signals. This control should be adjusted to suite the needs of the customer. CONTRAST : It applies a scale factor (gain) to the red, green, and blue signals . It affects the luminance

(proportional to intensity) that is reproduced for a full white input signal. The control should be adjusted to suit the needs of the customer. PHASE/FREQUENCY : It applies the resolution and position of the screen to suit the needs of customer in analog RGB mode. SHARPNESS : It applies to richness of detail of the picture. Control the sharpness if need to suite the needs of the customer. COLOR : To change the level of color from saturation to black and white . TINT : To change the level of the HUE COLOR TEMPERATURE :It applies to level of brightness. By increasing the level causes the overall picture to be slightly bluish in color. By decreasing the level causes picture to be slightly redish in color. BACKLIHGT : This changes the level of brightness of the back light of the display 21

NEOVIA 40LCD TV OWNERS INSTRUCTION IMAGE ADJUSTMENT E N G L I S H Press the MENU button. Press left cursor to select IMG.ADJ. Press down cursor to select functions within IMG.ADJ MENU. Press right / left cursor to change the settings. Press MENU or ENTER to save. Press MENU to escape OSD. ACCESS IMG.ADJ. Adjust the chosen function. Press ENTER to Save. Press EXIT to turn the OSD Off. This is the general image adjustment layout which can be seen when selecting IMAGE ADJUSTMENT in the on screen display

(OSD). Here the adjustment can be made to the displays horizontal and vertical position and image size if the display seems not in correct position. Image Size FILL ALL mode will display the picture at its maximum size but with slight elongation NORMAL mode display is set at original 4:3 ASPECT RATIO mode the display is streched vertically. ZOOM mode magnifies the central section of the picture WIDE mode The display is stretched at the edges. H Position / V Position To alter the picture position vertically and/or horizontally. AUTO Only valid in the Analog RGB mode to AUTO set Picture position. Freeze Frame To temporarly freeze current viewing picture (prolong freeze can permamently burned to the LCD panel hence it is not recommended for long period of time). 22 40LCD TV OWNERS INSTRUCTION NEOVIA SET UP Press the MENU button. Press left cursor to select SET UP. Press down cursor to select functions within SETUP MENU. Press right / left cursor to change the settings. Press MENU or ENTER to save. Press MENU to escape OSD. ACCESS SETUP. Adjust the chosen function. Press ENTER to save. Press EXIT to turn the OSD Off. E N G L I S H This is the general SETUP layout which can be seen when selecting SETUP in the on screen display (OSD). LANGUAGE:

Various OSD Language setting has been provided for ease of use. ENGLISH Hot key provided in the remote control for quick and convenient setting. FRENCH GERMAN ITALIAN PORTUGUESE SPANISH DUTCH OSD CLOCK TRANSPARENCY: To change the black background level. TIMEOUT: The time when OSD display to turn itself off when not been pressed for selected period of time. TIME : Displays current time when set. TIME ON : The time when TV to turn itself on. TIME OFF : The time when TV to turn itself off. CHANNEL : The channel that the TV to turn itself on. VOLUME : The level of the speaker sound when the TV turns on. SLEEP TIME : Timer setting for when the display to be turned off. The timer can be set for every 10 minutes interval for up to 180 minutes.

(Hot key is provided in the remote control for quick and convenient setting.) RESET Returns OSD setting to factory default setting. 23 NEOVIA AUDIO SETTING 40LCD TV OWNERS INSTRUCTION E N G L I S H Press the MENU button. Press left cursor to select AUDIO Press down cursor to select functions within AUDIO menu Press right / left cursor to change the settings. Press MENU or ENTER to save. Press MENU to escape OSD. ACCESS AUDIO. Adjust the chosen function. Press ENTER to save. Press EXIT to turn the OSD Off. This is the general AUDIO layout which can be seen when selecting AUDIO in the on screen display (OSD). SOUND MODE Preset equalizer values, Normal Music News Movie User. BALANCE This is to change the sound output level for left and right. EQUALIZER This has been provided to alter the output sound by the user when set as USER in mode setting . HEAD PHONE Balance : This is to change the sound output level for left and right. Volume : To change the sound output level. Treble : Change the level of the sound output level around 10KHz frequency area. Bass : Change the level of the sound output around 100hertz frequency area. STEREO Output sound modes stereo Mono, Bilingual Dual A Dual B Bilingual, Dual A and Dual B works if station sends it. SURROUND (Option) To enable or disable sound to boost and perform process to make the surround like sound for clear and fidelity sound. AUDIO To change the sound output from primary to secondary when in PIP or PBP mode. 24 40LCD TV OWNERS INSTRUCTION NEOVIA FAQ / TROUBLESHOOTING If the TV seems to have a problem, first try the following list of possible problems and solutions before contacting a service center. If none of these troubleshooting tips apply, do not attempt to repair the product yourself. Call your nearest service center. Symptoms that may appear to be a problem The following symptoms may happen even if the TV has no problem. First try the following list of possible problems and solutions before contacting a service center. First try the following list of possible problems and solutions. If the symptom continues, turn the TV off, and call your nearest service center. E N G L I S H Symptom Possible Problem Possible Solution No picture on the screen, and the power LED does not turn on. The TV is turned on, but there is no picture on the screen. Power connection problem. The brightness is adjusted too low. The fluorescent tube is out of order. Check the power cable connectivity to the power connector. Press the power switch again. Adjust the brightness and the contrast so that a picture is displayed brightly. The fluorescent tube of a LCD TV has a lifetime of about 50,000 hours. To replace the fluorescent tube, contact a service center. An afterimage is gen-

erated when continuously watching a still image. This is caused by an inherent property of LCD panels. Depending on the number of valid pixels, there may be black or bright pixels. These will be less than 0.005% of the sum of all pixels. This is not a problem. No picture is displayed on the screen, but there is no audio Discordance between the external device jack and the input switch button location. Adjust the input switch location. A picture is displayed on the screen, but there no audio. The volume is adjusted to 0. Mute is active. The audio cable is disconnected. Turn up the Volume button. Press the Mute button again. Check the audio cable connectivity. Remote control malfunc-

tions. The polarity of the batteries installed in the remote control is wrong. The batteries installed in the remote control have not been discharged completely. Noise is heard on the radio. This may happen when you use a radio near the TV. Reinstall the batteries properly. Replace the batteries with new ones. Noise may occur when you use a radio near the TV. Keep some distance between any radios and the LCD TV. No color in a color picture The Color density is adjusted to 0 or almost 0. tune. Adjust the Color density to 100 or less. 25 NEOVIA 40LCD TV OWNERS INSTRUCTION E N G L I S H Symptom Possible Problem Possible Solution Duplicated pictures on the screen. This may be caused by reflected broadcasting signals when there is are mountains, buildings, or trees near your house. Check if there are any tall objects such as skys crapers near your house. Check that the direction of the antenna is adjusted correctly. Blurred or snowy picture. The direction of the antenna is not optimal. The antenna cable is disconnected. Check that the direction of the antenna is correct. Check that the antenna cable is connected to the ANTENNA jack on the back of the LCD TV. A No input signal message appears. The Signal connection is incorrect. The input signal is not supported by the LCD TV. The entire screen flickers. Check that the computer is turned on. Check the display cable connectivity. Check specifications. the supported input signal the supported Check specifications. Check the display cable specifications. input signal This product has been optimally set to watch TV channels in the factory. There may be flickering when you watch still images from a PC. This is not a problem of the product. The remote control does not work properly!

Are the polarities of the installed batteries correct?

Has the battery discharged completely?

Is the power cord plugged in properly or is there a power failure?

Is fluorescent lighting or a neon sign near the unit?

Warning If a problem has been detected, unplug the power cable from the wall outlet first. Using the product when it has a fault may cause electric shocks or fire. Do not place objects near the wall outlet so that you can unplug the power cable if necessary. 26 E N G L I S H 40LCD TV OWNERS INSTRUCTION NEOVIA SPECIFICATIONS The exterior design and the product specifications are subject to be changed without prior notice due to improvements in performance. This product is manufactured for domestic use. This product may not be used in countries whose television system type or power voltage is different. Model NEO400LS Screen Size 40 inch wide Viewable Screen 885.160(H) X 497.664(V) Pixel Area Type 0.648(H) X 0.216(W) a-si TFT activ matrix Viewing Angle Up/Down : 170degrees, Left/Right : 170degrees LCD Panel Display Color 8bit, 16.7M MAX Resolution 1366 X 768 Contrast Ratio Luminance / AVR Panel Interface Coating Back Light 1,000 : 1 500 cd/

LVDS Hard coating(3H) & Anti-glare treatment of the front polarizer U-type CCFL (Cold Cathode Fluorescent Lamp) Receiver/Channels VHF: Channel E2 ~ Channel E12 UHF: Channel E21 ~ Channel E69 CATV: Channel S1 ~ Channel S41 Television Broadcasting System: PAL, SECAM: B/G, D/K, I, L, L TV/VIDEO Antenna Interface VHF, UHF: 75ohm Video Signal PAL, SECAM Synchro-

nization Horizontal F 30 ~ 60KHz Vertical F 60Hz PC Color Quality 16,772,216 colors Maximum Resolution VESA 1360 X 768 @ 60Hz Display Color Interface 8-bit, 16.7M D-sub / DVI 27 NEOVIA 40LCD TV OWNERS INSTRUCTION E N G L I S H Model RF VIDEO1 VIDEO2 VIDEO Ext. HDMI INPUT S-VIDEO DVI PC RGB HD1 / HD2 PC AUDIO NEO400LS BNC SCART1 SCART2 RCA HDMI Mini-DIN DVI Analog RGB, Separate H / V 480i/480p 60Hz, 576i/576p 50Hz, 720p 50Hz/60Hz, 1080i 50Hz/60Hz Stereo POWER SUPPLY AC 100 ~ 240V, 50 / 60Hz OUTPUT VIDEO AUDIO L/R for VIDEO S/P DIF HEADPHONE RCA RCA Option Stereo SPEAKER 10W X 2 / 10W X 2 (Tweeter) : RMS Power Consumption Maximum 300W Power Consumption with Power Saving Less than < 10W Input Voltage AC 100 ~ 240V ~ , 50 / 60Hz Dimension Weight Accessories Monitor + Stand 1051 X 794 X 300 Monitor Alone 1051 X 742 X 116 45Kg Remote control, Battery (AAA) X 2, Owners Instruction, Power Cord, SCART Cable

* This devices has been registered in regards to EMI for residential use. It may be used in all areas. 28 Pour toute question, nhesitez pas a contracter la HOTLINE :

In case of any question, do not hesitate to contact the HOTLINE:

France / France Italie / Italy Royaume-Uni / UK Belgique / Belgium Luxembourg / Luxemburg Hollande / Netherland Suisse / Switzerland Espagne / Spain Portugal / Portugal

: 0 892 02 17 56

: 0296 172 240

: 08 70 60 91 564

: 064 237 181

: 00 32 64 237 181

: 00 32 64 237 181

: 0844 810 110

: 902 100 424

: 229 408 962 40LCD TV OWNERS INSTRUCTION