all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 3.68 MiB | October 17 2022 | |||
1 |
|
Internal Photos | Internal Photos | 840.94 KiB | October 17 2022 | |||
1 |
|
External Photos | External Photos | 305.39 KiB | October 17 2022 | |||
1 |
|
Label Location | ID Label/Location Info | 102.07 KiB | October 17 2022 | |||
1 |
|
Antenna Specification | Test Report | 520.31 KiB | October 17 2022 | |||
1 | Block Diagram | Block Diagram | October 17 2022 | confidential | ||||
1 |
|
FCC Authorization letter | Cover Letter(s) | 17.89 KiB | October 17 2022 | |||
1 |
|
FCC Long-term Confidential Authorization | Cover Letter(s) | 22.12 KiB | October 17 2022 | |||
1 | Operational Description | Operational Description | October 17 2022 | confidential | ||||
1 |
|
Declaration Letter | Attestation Statements | 423.61 KiB | October 17 2022 | |||
1 | Schematics | Schematics | October 17 2022 | confidential | ||||
1 |
|
Test Report | Test Report | 1.01 MiB | October 17 2022 | |||
1 |
|
Test Setup Photos | Test Setup Photos | 350.41 KiB | October 17 2022 |
1 | User Manual | Users Manual | 3.68 MiB | October 17 2022 |
co DIB-N800 Series DIB-N810 / DIB-N830 / DIB-N850 DIB-N810R / DIB-N830R / DIB-N850R Users Manual This manual contains the warranty card. Please read this manual carefully before use. Please save this manual and place in easily accessible location. Do not attempt to service this appliance yourself. Doing so will void warranty. Table of Contents 01 General Information Safety Information - Warning Safety Information - Caution Product Features Product parts 02 Installation Before Installation Product Installation Remote Installation Trial Operation 03 Operation General operation Expert Mode 04 Technical Information Maintenance Error code Specifications Comparison Chart Dimensions Warranty 4 6 8 10 14 15 17 18 19 24 28 30 31 32 33 34 02 03 Safety Features Safety Information Warning Caution Risk of electric shock, fire, personal injury, property damage or products damage when violating the instructions. Risk of electric shock, fire, personal injury, property damage or products damage when violating the instructions. Do not disassemble, modify or repair the product yourself. Do not stand on the top of or place any heavy objects onto the seat cover. Do not plug or touch the power plug with wet hands. Do not open/close the lid/seat with excessive force. Do not pour excessive water onto the products or power plug. Do not lean against the lid when opening with excessive force. Do not use the damaged power plug, cord and outlet. Do not press the buttons using excessive force. This products should be used with a grounded outlet. Insert the power plug correctly in proper voltage outlet. Do not place cigarettes or flammables near the product. Do not litter into the product. Do not use industrial water, or gray water for the supply Do not plug in until the unit is completely installed The unit should be serviced by an authorized or qualified technician if it has a damaged power cord. Make sure that drying opening area is not blocked. Unplug first before cleaning the unit. Do not use the product in locations exposed to excessive moisture. Do not use thinner, benzene, acidic chemicals, chloride, or hydrochloric acid detergent on or near the product, This may result in corrosion to the metal parts or discoloration, breakage or scratches to the bidet body. Do not use any aerosol(spray) products near by. This may result in discoloration of the bidet body. Do not pull out the bidet hose using excessive force. Be cautious of the low-temperature burn. For children and seniors who may have difficulties with adjusting temperatures or those with sensitive skin or impaired heat sensitivity, set the temperature of the wash spray and seat to low or off to prevent burning. If the unit will not be used for a long period of time, unplug the power cord, and close the main water supply valve. Do not use the product if it has fallen into water. Unplug the unit immediately and call the service center. Do not use the unit if it is not working properly. This unit is not intended for use by persons (including children and seniors) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge. Make sure the unit is installed(mounted) on the installation bracket thoroughly. After the installation, make sure to check all water supply connections for leaks. Rubber washers should be in place for the water connection hoses and T-valve Do not store or place the unit upside down. Children should be supervised to ensure that they do not play with the unit. 04 05 Safety Features Safety Information Warning Caution Risk of electric shock, fire, personal injury, property damage or products damage when violating the instructions. Risk of electric shock, fire, personal injury, property damage or products damage when violating the instructions. TURBO Water filter Remove the water in the rectum after using Turbo function, or you may feel bloated or uncomfortable. In the case of a use environment where tap water has rust, it may cause internal contamination and leakage of the product. Be sure to use a genuine water filter. If you have hemorrhoids or anal disease, be sure to consult with your doctor before use. Excessive use may worsen bowel function. 2X MODE When using 2X mode, intake water temperature may affect the water spray temperature. Be sure to consult your doctor before use if you have hemorrhoids or anal disease. Excessive use is not recommended. Instant heating Instant ceramic heating system provides an endless water washes. However, when using in a very cold area with high water pressure, the hot water may not reach the set temperature, and this is not a malfunction. If you lower the water pressure during use, you can use warmer washes. Cleaning the bidet body Warm air dryer Do not use thinner, benzene, acidic chemicals, chloride, or hydrochloric acid detergent on or near the product, This may result in corrosion to the metal parts or discoloration, breakage or scratches to the bidet body. Do not use any aerosol(spray) products nearby. And do not sit on the seat after applying excessive body lotion. This may result in discoloration of the bidet body. The dryer effect will be improved if moisture is lightly wiped out before the dry operation. The temperature of hot air drying may vary depending on the surrounding temperature even with the same setting. Water supply hose and power cord Toilet bowl flatness Be careful not to drop any chemical detergents of the toilet cleaner on the water supply hose or power cord. If exposed to the chemical detergent, remove it immediately. The new water hose with the appliance should be used and the old hose is not recommended to be reused. This product is designed to be placed on the toilet well regardless of toilet flatness, but sometimes the rear of the seat may lift from the toilet if the surface of the toilet bowl is seriously not flat. This may cause excessive strain on the toilet seat and bidet body, and may cause damage such as external cracks. Please contact the dealer or manufacturer for additional supports. 06 07 Products Features Ceramic water heating technology co Product Features 2 Energy Saving modes Instant ceramic heating system provides an endless water washes. Offers 2 different energy-saving modes to maximize the electricity saving. Touch control panel By applying the touch control panel with perfect waterproofness equivalent to IPX8, this can be used conveniently without worrying about malfunction even in high temperature and high humidity environments. (limited to side arm models) IPX5 Waterproof Bidet main unit is designed with IPX5 waterproofness level for safety. Rear/Front wash Adjustable temperature, position, pressure, pulsation and oscillation settings. 2 Nozzle Cleansing modes Offers 2 different nozzle cleansing modes to enhance the hygiene. Nozzle/Dry Protection Cover Prevents a nozzle and dry outlet from any contaminations with a protection cover for easy cleaning and maintenance. Intensive Nozzle Care Provides a more hygienic environment for use by intensively cleaning only the contaminated nozzle tip. Enema(Turbo) Quiet Pump Specialized water spray in Turbo(enema) helps relieve constipation and fecal stasis. Available powerful water flow with low noise pumping operation sound by applying the new wave control technology. 2X mode For users who prefer the stronger water pressure, 2X mode offers double-power water spray. Enhanced Dry Airflow Enhanced dry fan motor and specially designed outlet structure offer quick drying. Aerated wash Automatic Leveling Seat A specially designed nozzle tip structure generates an air bubble wash spray for better cleansing performance. Minimizes seat damage due to the uneven surface of the toilet bowl by an applying automatically adjustable leveling seat system. Stainless steel nozzle Radio Frequency Remote A fully stainless steel nozzle resists rusting and contamination for better hygiene. Perfect remote control without interference in bathroom structure and other lights by applying radio frequency remote. Multicolored, illuminating nightlight Choose a preferred nightlight to provide enough brightness to find a toilet without turning on the light at night. 08 User Preset Set water temperature, seat temperature, water pressure, nozzle position, dry temperature, oscillation, and pulsation for two users. 09 Product parts Control panel User presets Stop Rear wash Rear wash oscillation 2X rear wash mode Front wash Front wash oscillation 2X front wash mode Turbo (enema) Dry 1 4 Lid Seat 7 Intake deodorizing hole 2 5 8 Control panel Release lever Catch plate 3 6 9 Nozzle Deodorizing cover and air outlet Water inlet 10 Night light 11 Power cord Installation parts Metal bolts Rubber anchor bolts T-valve Deodorizing cover Deodorizing filter Bidet hose Brackets Mounting bracket Water filter
(Optional) Water pressure/
Dry temperature control Nozzle position control Child wash Pulsation Water temperature control Seat temperature control Engergy saving Nozzle cleansing Select once Select once again Select and hold for 3 seconds 10 11 5124391087611 Product parts 1 2 3 1 4 Lid Seat 7 Intake deodorizing hole 4 2 5 8 5 11 9 10 6 8 8 7 Auxiliary panel Release lever Catch plate 3 6 9 Nozzle Deodorizing cover and air outlet Water inlet Control panel User presets Rear wash Rear wash oscillation 2X rear wash mode Nozzle position control Turbo (enema) Seat temperature control Dry Pulsation Front wash Front wash oscillation 2X front wash mode Water pressure/
Dry temperature control Child wash Water temperature control Stop Nozzle cleansing Engergy saving 10 Night light 11 Power cord Select once Select once again Select and hold for 3 seconds Installation parts Parts for remote control Metal bolts Rubber anchor bolts T-valve Deodorizing cover Deodorizing filter Bidet hose Brackets Mounting bracket Water filter
(Optional) 12 Remote control Remote control bracket CR2032 battery X 2 13 CR2032CR2032 Before installation Product Installation Caution Do not plug the product in until the unit is completely installed. Read the manual first before installation. Check whether the toilet to be installed is suitable for the installation Toilet size, mounting hole spread, shutoff valve installed, Space for T-valve, flexible hose installed, etc. For this, contact the local dealer where you purchase your bidet seat for special assistance. Prepare the standard screwdriver and wrench in advance. Teflon tape may be needed between plumbing connections Every product is tested with pure water during production to ensure the highest quality and performance. It is normal to find a small amount of residual water drops or moisture on the product. 1. Remove the seat from the existing toilet Release the nuts and then remove the seat and cover. Keep the removed seat, cover and nuts in a a proper place in case of using them again. 2. Shut the supply off, and empty the tank completely Connect with the cold water supply only. Failure to do may result in flooding, leaking or damage to the product when the hose is disconnected. 3. Disconnect the toilet hose and install the T-valve You may use the bucket to catch the residual water from the hose. Check and ensure the rubber washer sits flat inside of the T-valve. 4. Install the catch plate Wet the rubber anchor bolts with water and firmly insert them all the way down into the mounting holes on the top of the toilet. Place the mounting plate over the rubber anchor bolts on the toilet. Place the brackets flat side down on the mounting plate over the rubber anchor bolts. Insert metal mounting bolts through the holders and rubber anchor bolts; use a screwdriver to screw in the mounting bolts and tighten. If the toilet bowl is not suitable to use mounting anchor bolts, contact the local dealer where you bought your product for more assistance. 5. Insert the deodorizer filter Applicable models only Insert the deodorizer filter into the cartridge hole. 14 15 Product Installation Remote Installation 6. Attach the bidet seat to the catch plate Adjust the seat and front part of the toilet back and forth so that they can correspond before fastening the bolts. Set the bidet seat flat on the toilet bowl and push it in until it clicks into place and is secure. Failure to do may cause the seat to come apart. 7. Connect the bidet hose to the bidet seat Rotate the water inlet backward and hand-tighten to secure. Make sure the hose is not twisted, excessively bend it, or strip the plastic threads when screwing the hose onto the bidet seat. After connection, rotate the inlet back to the normal position. Connect the other end of the hose to the T-valve. Check and ensure the rubber washer is not twisted when fastening. Bidet Filter Installation Customers with hard water, well water, and rust water can extend the life of their bidet seat by installing an inline water filter. Install the filter between T-valve and bidet hose. T h e b i d e t f i l t e r s h o u l d b e r e p l a c e d e v e r y 4~6months. Failure to replace the filter on time may result in water contamination, supply congestion, or filter breakage. 1. Find a place visible and reachable from the toilet and clean the space thoroughly before attaching the bracket. 2. Peel the adhesive protection film and attach the bracket on the wall. 3. Insert the batteries deeply inside first and p r e s s t h e o u t s i d e a l l t h e w a y d o w n t o complete the insertion. Be sure to fasten the bolt for childrens safety. 4. Gently insert the remote control into the bracket. 5. If the automatic pairing is failed, follow the below instructions. Plug in the bidet seat. The nozzle comes forward and goes backward, then melody plays. Insert the batteries. Press any buttons to complete the pairing. Melody is played to identify pairing completion. 6. Replace all batteries at the same time. Do not mix old and new batteries. Keep the battery out of reach of infants and toddlers and watch out them not to swallow it. If a battery is swallowed, immediately consult a doctor. Caution for pairing Be sure to proceed in the order of pairing method. If the order is reversed during pairing, remove the remote control batteries and product power cord, wait tens of seconds, and start again from the beginning. To automatically pair the remote to the seat, install the batteries into the remote within 5 minutes of plugging the seat into the power outlet. This product is an RF-type remote control with its own unique number assigned to each product. There is little chance of confusion if two or more remote control bidet seats are installed at the same place. In this case, contact the local dealer where you purchase your seat for more assistance. 16 17 CR2032CR2032 Trial Operation Operations 1. Turn on the water supply Make sure the flush tank is filled up with water. 2. Check all connections for leaks, including T-valve and hose connections In case of leakage, check the tightening of the nut and whether the rubber washer is missing or twisted, and Teflon tape may be required depending on the installation environment. 3. Plug in Do not touch the plug with wet hands. 4. Check the initial operation The night light blinks while the nozzle extracts and retracts. Occupied seat sensor (getting started) Sit on the seat to ensure skin contact on the seat sensor. Clothes or other materials except for skin contact on the sensor may interrupt the bidet seat operation. Once the contact is made the water pressure indicator lights will turn on. Leaving the seat during use will stop the operation. Stop Stops all wash and dry functions currently operating
(Side arm/Remote control) Gently touch for a second any parts of the dotted area to stop the wash cycle. (Auxiliary panel) Rear wash / Front wash / Turbo wash / Oscillation Select once to initiate a rear/front/turbo wash. The nozzle will be self-cleaned before/after wash operation. (Turbo wash is not available with the auxiliary panel.) Select once again to initiate nozzle oscillation. To stop the oscillation, choose again. The oscillation at Turbo wash is not available for safety. Do not use a Turbo wash excessively and consult with a doctor first if you have any anal disease or you are sensitive. For water temperature when using in a cold environment, refer to the cautions in this manual. Swipe finger toward the front to initiate a front wash. Swipe finger toward the front again to initiate an oscillation. (Auxiliary panel only) Swipe finger toward the rear to initiate a rear wash. Swipe finger toward the rear again to initiate an oscillation. To cancel the oscillation, swipe the same direction again. (Auxiliary panel only) Side arm/Remote control Auxiliary panel Side arm/Remote control Auxiliary panel Oscillation 18 19 3 seconds Operations 2X mode If the stronger water pressure is preferred while a rear/
front wash, select and hold a button for 3 seconds to change to 2X mode. 2X mode starts from Level 3 regardless previous setting. Select and hold a rear/front wash button for 3 seconds to initiate 2X mode rear/front wash. Select once again to initiate nozzle oscillation. To cancel the oscillation, select again. To cancel 2X mode, select and hold a rear/front wash button for 3 seconds. Do not use 2X mode wash excessively and consult with a doctor first if you have any anal disease or are sensitive. For warm water temperature when using in a cold environment, refer to the cautions in this manual. Child wash (automatic wash) Select a Child wash button to initiate an child wash that offers from the wash until the drying function for children and seniors. Rear wash 20 seconds Rear wash oscillation 20 seconds Rear wash oscillation with pulsation for 20 seconds Dry for 2 minutes will consecutively work. Dry Applicable models only Select a dry button to initiate a 3 minutes air dryer cycle. Dryer air temperature can be adjusted by +/- button. (5 levels) For dryer air temperature when using in a cold environment, refer to the cautions in this manual. Pulsation Select a pulsation button to initiate pulsation while rear/front/turbo is running that enables the water to repeatedly increase and decrease in pressure in a pulsating pattern. To cancel pulsation, select the pulsation button again. Water pressure Select a rear/front/turbo wash button to adjust water pressure by +/- button. (5 levels) If you feel that the water pressure is weaker than usual, there may be small debris stuck in the water supply screen filter or inline filter. Refer to maintenance instructions in this manual. Operations Nozzle position Select / during a wash cycle to adjust the nozzle position forward and backward. The 5 LED indicator lights will indicate different positions selected. Settings will be saved for the next use. Seat temperature Select a seat temperature button to adjust the seat temperature to 1 of 4 settings. Room temperature/off low/green(34C/93.2F) medium/yellow(37C/98.6F) high/red(40C/104F) Settings will be saved for the next use. If the seat is used 15 minutes consecutively when the seat temperature is set at medium and high, the seat temperature will be lowered automatically down to 35C/95F by 1C/1.8F every 5 minutes. For safety, this bidet seat uses a low voltage for a heated seat. It may take a little while to be heated at the beginning. Water temperature Select a water temperature button to adjust the seat temperature to 1 of 4 settings. Room temperature/off low/green(34C/93.2F) medium/yellow(37C/98.6F) high/red(40C/104F) Settings will be saved for the next use. This bidet seat is an instant heating system with the latest technology applied, and it does not consume any electricity for the water heating in standby mode, saving electricity. If the bidet seat is used in a very cold area with high water pressure, the warm water may not reach the set temperature. Refer to the precaution in this manual. Deodorizer Applicable models only The deodorizer starts automatically when a user sits on the seat. It continues to run for one minute after the seat has been vacated. The deodorizing cartridge is semi-permanent but needs to be cleaned regularly with a brush. low medium high low medium high 20 21 Operations Energy saving Select the Energy saving button once to initiate the Energy saving mode 1. Select it again to initiate the Energy saving mode 2. To cancel the Energy saving mode, select it once again after the Energy saving mode 2. No energy saving (off) Energy saving mode 1 (green) Energy saving mode 2 (red) Energy saving mode 1 (regular saving) Seat temperature is lowered as below and goes back to the previous set temperature automatically as soon as the seat is occupied.
- Low temperature (34C/93F) (28C/82F)
- Medium temperature (37C/99F) (30C/86F)
- High temperature (40C/104F) (32C/90F) Energy saving mode 2 (powerful saving) Seat heating is turned off regardless of the current temperature setting and goes back to the previous set temperature automatically as soon as the seat is occupied. After a seat is unoccupied, it returns to Energy-saving mode. The night light dims during the Energy saving mode 2 and when a user sits on the seat, it becomes bright and dims back after leaving the seat. Multicolored night light Select a nozzle cleaning button repeatedly to change the color of the night light 1 of 7 colors while the seat is occupied. The default color is white and can be changed in the following order. Pure white Sky blue Pretty yellow Princess pink Hot red Sea blue Forest green Off The night light dims during the Energy saving mode 2 and when a user sits on the seat, it becomes bright and dims back after leaving the seat. Factory default reset To reset the bidet seat back to its factory default settings, select the stop button 4 times within 2 seconds to clear all current settings. A factory reset can only be performed when the seat is not occupied. A tone will be heard to confirm that the bidet seat has been initialized. 22 Operations Nozzle cleaning There are two ways to initiate nozzle cleaning. Nozzle cleaning 1 (nozzle body care) Select Nozzle cleaning for a second while not seated. Nozzle extends toward and self-clean 3 times with cold water. It retracts when finished. Pressing Stop at any time to cancel the nozzle cleaning process. Nozzle cleaning 2 (Nozzle tip intensive care) Select and hold the Nozzle cleaning button for 3 seconds while not seated. Nozzle extends toward and nozzle tip will be self-cleaned for 40 seconds with hot water. It stays extracted for users manual cleaning for 5 minutes and retracts automatically. Select the Nozzle cleaning button again to retract the nozzle if the cleaning process is finished earlier. Select the Nozzle cleaning button while the nozzle tip is being self-cleaned, and self cleaning is canceled and extracts promptly for users manual cleaning. User preset You can program your preferred settings for two users. Follow the steps below to program and use the memory function. Water temperature, seat temperature, water pressure, nozzle position, and dry temperature can be stored. Use the bidet seat with your preferred settings first and select and hold one of the user preset buttons for 3 seconds. Settings will be saved with 1 beep. Settings can be overwritten on the current presets. In this case, old settings are deleted and new settings are saved. Select the user preset 1. 2 LEDs(green/red) of Energy saving light on and only green LED blinks once altering you that user memory 1 is activated. Select the user preset 2. 2 LEDs(green/red) of Energy saving light on and only green LED blinks twice altering you that user memory 2 is activated. 3 seconds 3 seconds 4 times!
Sleep mode Select and hold Energy-saving for 3 seconds to enter Sleep mode regardless of the seat sensor occupation. Select Energy-saving again for a second to cancel the sleep mode. 3 seconds 23 Expert mode Expert mode allows the user to program the operations. It may be complicated for regular users. 2 seconds Entering & canceling Expert mode Select and hold Nozzle Cleaning for 2 seconds while Stop is selected and held to enter/cancel the expert mode. Nozzle Cleaning LED blinks to indicate Expert mode has been entered. The seat sensor is automatically overridden and, if the overriding is not canceled forcibly, it is canceled after 20 minutes automatically. Seat occupy sensor overriding and canceling After entering Expert mode, touch a seat sensor area to deactivate the seat sensor override. 5 LEDs of water pressure/nozzle position are turned off to indicate that the seat sensor override is deactivated. Touch the seat sensor again to activate the seat sensor override. 5 LEDs of water pressure/nozzle position turn on to indicate that the seat sensor override is activated. Wash cycle change Deactivate the seat sensor override. Select Water temperature while Rear wash is selected and held. C o l o r o f Wa t e r t e m p e r a t u r e L E D i s c h a n g e d sequentially.1min (off) 2min (low/Green blinks) 3min (medium/yellow blinks) 5min (high/red blinks). Cycle of front wash and Turbo wash can be changed in the same way. Default cycle is 2 minutes. Expert mode Dry cycle change Activate the seat sensor override. Select Water temperature while Dry is selected and held. C o l o r o f Wa t e r t e m p e ra t u r e L E D i s c h a n g e d sequentially.1min (off) 2min (low/Green blinks) 3min (medium/yellow blinks) 5min (high/red blinks). Default cycle is 3 minutes. Child wash cycle change Deactivate the seat sensor override. Select Water temperature while Child wash is selected and held. C o l o r o f Wa t e r t e m p e ra t u r e L E D i s c h a n g e d sequentially.30sec (off) 60sec (low/Green blinks) 120sec (medium/yellow blinks) 180sec (high/red blinks) 30sec (off) : 10sec front wash 10sec front oscillating wash 10sec front oscillating/pulsating wash 60sec (off) : 20sec front wash 20sec front oscillating wash 20sec front oscillating/pulsating wash 120sec (off) : 40sec front wash 40sec front oscillating wash 40sec front oscillating/pulsating wash 180sec (off) : 60sec front wash 60sec front oscillating wash 60sec front oscillating/pulsating wash Default cycle is 60 seconds. Dry cycle change at Child wash Deactivate the seat sensor override. Select Seat temperature while Child wash is selected and held. C o l o r o f S e a t t e m p e r a t u r e L E D i s c h a n g e d sequentially.30sec (off) 1min (low/Green blinks) 2min (medium/yellow blinks) 3min (high/red blinks). Default cycle is 2 minutes. 24 25 Expert mode Water pressure and nozzle position change Activate the seat sensor override Basically, the water pressure and nozzle position are stored and are maintained from the previous user's settings, but these can be ignored and automatically be changed to the presets as soon as the seat is unoccupied. Adjust the nozzle position and water pressure and select and held Rear wash for 3 seconds. 2 LEDs(green/red) of the energy saving blink with 1 beep when it is activated and only 1 LED (red) blinks with 2 beeps when it is deactivated. Front wash, Turbo wash and Child wash can be set in the same way. Adjust the dryer temperature and select and held Dry for 3 seconds. 2 LEDs(green/red) of the energy saving blink with 1 beep when it is activated and only 1 LED (red) blinks with 2 beeps when it is deactivated. Silence mode on/off Select water pressure -while Stop is selected and held to lower the volume of the beep sound. The volume of the beep sound will be lowered after getting out of Expert mode. 3 seconds Expert mode Automatic deodorize on/off This feature can be set regardless seat sensor override. Select Water temperature while Stop is selected and held to initiate/cancel the automatic deodorize. 2 LEDs(green/red) of the energy saving blink with 1 beep when it is activated and only 1 LED (red) blinks with 2 beeps when it is deactivated. Automatic pulsation wash on/off Deactivate the seat sensor override. Select water pressure +/- simultaneously to enter automatic pulsation wash setting mode. Select and hold Rear wash for 3 seconds to initiate/
cancel automatic oscillation rear wash. 2 LEDs(green/
red) of the energy saving blink with 1 beep when it is activated and only 1 LED (red) blinks with 2 beeps when it is deactivated. Front wash, Turbo wash and Child wash can be set in the same way. In the case of Child wash, Child pulsation wash is deactivated first instead of being activated as it is set basically. 20sec front wash 20sec front oscillating wash 20sec front oscillating/pulsating wash. Automatic oscillation wash on/off Select nozzle position simultaneously to enter automatic oscillation wash setting mode. Select and hold Rear wash for 3 seconds to initiate/cancel automatic oscillation rear wash. 2 LEDs(green/red) of the energy saving blink with 1 beep when it is activated and only 1 LED (green) blinks with 2 beeps when it is deactivated. Front wash and Child wash can be set in the same way. In the case of Child wash, Child oscillation wash is deactivated first instead of being activated as it is set basically. 20sec front wash 20sec front oscillating wash 20sec front oscillating/pulsating wash simultaneously simultaneously 26 27 Maintenance Maintenance Dual protection (dryer inner cover and closed nozzle cover) protects the bidet seat from contamination and water damage. Cleaning the screen filter Turn off the water supply and hold the toilet flush lever down to empty the tank completely. Unplug the bidet seat, remove from the toilet and disconnect the bidet hose. You may use the bucket to catch any dripping water from the hose and bidet seat. Remove the screen filter from the water inlet with a long-nosed pliers. Clean the filter with a toothbrush and re-install it correctly. Reconnect the bidet hose and place the bidet seat back, Plug the power cord back and turn the water supply back on. Check for leaks. Cleaning bidet seat body Do not use thinner, benzene, acidic chemicals, chloride, or hydrochloric acid detergent. Do not scrub or use harsh, abrasive products to clean the seat. Use a soft, damp cloth and mild cleanser and do not spray water excessively onto the bidet seat. If the contamination is serious, use the mild detergent (such as dish soap) only and make sure there is no residue after cleaning. Do not use any aerosol(spray) products nearby. This may result in discoloration of the bidet body. Unplug first before cleansing, and be aware of not wetting the power plug. Be careful of not to drop any chemical detergents of toilet cleanser on the water supply hose or power plug. Cleaning the bottom and toilet bowl Unplug and shut the water supply off, then flush toilet and hold down dandle to completely empty tank. Disconnect water supply hose from the bidet seat. You use a bucket to catch any dripping water from the bidet and hose. Press the bidet release lever and gently pull inward to remove the bidet seat. Use a soft, damp cloth and mild/neutral cleanser
(such as dish soap) to wipe down the bidet body and remove the cleanser completely. In case of cleaning the toilet, remove the catch plate first. Make sure there is no cleanser left on the toilet after cleaning. Cleanser residue may damage the bidet body. Product storage Keep the unit plugged in to prevent freezing if the bidet seat is installed in a cold place. When the bidet seat is not used for an extended period of time, unplug. When it is reused after it is stored in a cold place, keep the unit in a warm place for a while before plugging in. 28 29 Error code Specification In the event of an abnormality, please refer to the error code table below and inform us at the time of receiving repair service, so that the action may be easier. Item DIB-N810/DIB-N830/
DIB-N850 DIB-N810R/DIB-N830R/
DIB-N850R Remote model Common display Left Right No. Seat temperature Green LED blinks Seat temperature RED LED blinks Water temperature Green LED blinks Water temperature Green and Yellow sequentially blink Energy saving Water temperature RED blinks Green and Red Water temperature Yellow and Red sequentially blink LED sequentially Blink, and Night light Red blinks 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Disconnected or not inserted seat temperature sensor Short or overheated seat temperature sensor Disconnected or not inserted intake water temperature sensor Short or overheated intake water temperature sensor Disconnected or not inserted outlet water temperature sensor Short or overheated outlet water temperature sensor Low voltage Solenoid valve overcurrent Solenoid valve disconnection Drying fan motor disconnection or overcurrent Deodorizing fan motor overcurrent Pump motor overcurrent Flow meter disconnection or abnormality Overvoltage Side arm model Side arm model Left Right No. Seat temperature Green LED blinks Seat temperature RED LED blinks Water temperature Green LED blinks Water temperature Green and Yellow simultaneously blink Energy saving Water temperature RED blinks Green and Red Water temperature Yellow and Red simultaneously blink LED sequentially Blink, and Night light Red blinks 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Disconnected or not inserted seat temperature sensor Short or overheated seat temperature sensor Disconnected or not inserted intake water temperature sensor Short or overheated intake water temperature sensor Disconnected or not inserted outlet water temperature sensor Short or overheated outlet water temperature sensor Low voltage Solenoid valve overcurrent Solenoid valve disconnection Drying fan motor disconnection or overcurrent Deodorizing fan motor overcurrent Pump motor overcurrent Flow meter disconnection or abnormality Overvoltage Error code display priority Error code display is divided into two sections, 1 to 6 and 7 to 14. Error with a smaller number is displayed only. For example, if No. 1, No. 6, No. 8, and No. 14 occur simultaneously, only No. 1 and No. 8 are displayed. If 1 is solved, only 6 and 8 will be displayed, if 8 is solved, 6 and 14 will be displayed. Power voltage AC 220V / 60Hz Max power consumption Power cord 1,430W 1.8M Supply water connection Directly connects to the water pipe Supply water pressure 0.068 ~ 0.735 MPa Rear wash 65050cc/min (85050cc/min at 2X mode) Volume Front wash 65050cc/min (80050cc/min at 2X mode) Turbo(enema) 76050cc/min Wash Pressure control Rear/Front wash (10 levels incl. 2X mode) Turbo(enema) 5 levels Temperature control 4 levels (Off, low, middle, high) Max heater power consumption 1,400W Safety devices Thermal sensor, Thermal fuse, Thermal switch Temperature control 4 levels (Off, low, middle, high) Heated seat Max heater power consumption 38W Safety devices Thermal sensor, Thermal fuse Temperature control 5 levels Dry Heater capacity 400W Safety device Thermal fuse Deodorizer Catalyst Carbon deodorization filter (replaceable) Incoming water temperature tolerance range Usage room temperature tolerance range 3 ~ 35 (12 ~ 35 recommended) 3 ~ 40 (10 ~ 35 recommended) 3 ~ 40 (10 ~ 35 recommended) 3 ~ 40 (10 ~ 35 recommended) Product dimensions Elongated Round 449mm X 528mm X 112mm 380mm X 528mm X 112mm 449mm X 500mm X 112mm 380mm X 500mm X 112mm Frequency band Modulation type Antenna type Wireless type Product weight 2440 Mhz OQPSK Internal antenna Zigbee 4~4.5kg(6.5~7kg) 30 31 Remote control Specifications Feature DIB-N810 DIB-N830 DIB-N850 DIB-N810R DIB-N830R DIB-N850R Comparison Chart Product name Model name Frequency band Modulation type Antenna type Power supply Wireless type Product size RF remote control for an electronic bidet seat DIB-LT1-RF 2440 Mhz OQPSK Internal antenna DC 3V (CR2032 Battery 2EA) Zigbee 66mm X 155mm X 10mm Product weight 105 g Wash
Dry Rear wash Front wash Turbo (Enema) Child wash Pulsation Oscillation Instant heating Aerated wash Built in pump Drying Deodorizing Heated seat User preset Convenient Soft closing feature Quick removal Night light Nozzle cleansing(2 modes) Energy saving(2 modes) Safety feature Low burn protection 32 33 WARRANTY 99mm 112mm 99mm 112mm Dimension Side arm model
[ Elongated ]
380mm 200mm
[ Round ]
380mm 200mm m m 8 2 5 m m 0 0 3 449mm 449mm Remote model
[ Elongated ]
380mm 200mm
[ Round ]
380mm 200mm m m 8 2 5 m m 0 0 3 m m 0 0 5 m m 0 8 2 m m 0 0 5 m m 0 8 2 155mm 10mm 66mm 34 35 Federal Communications Commission Statement CE Marking This device complies with FCC Rules Part 15. Operation is subject to the following two conditions:
This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radio Frequency (RF) Exposure Caution Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with FCC RF exposure compliance requirements, please avoid direct contact to the transmitting antenna during transmitting. End users must follow the specific operating instructions for satisfying RF exposure compliance. CE marking for devices with wireless This equipment complies with the requirements of Directive 2014/53/EU of the European Parliament and Commission from 16 April 2014 governing Radio Equipment of conformity. IC Radiation Exposure Statement for Canada This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with IC RF exposure compliance requirements, please avoid direct contact to the transmitting antenna during transmitting. End users must follow the specific operating instructions for satisfying RF exposure compliance. Operation is subject to the following two conditions:
This device may not cause interference and This device must accept any interference, including interference that may cause undesired operation of the device. To prevent radio interference to the licensed service (i.e. co-channel Mobile Satellite systems) this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. 36 37 ver.2207 www.lsdaewon.co.kr
1 | Label Location | ID Label/Location Info | 102.07 KiB | October 17 2022 |
) oF Equipment Name : RF remote control for an electronic bidet seat Model Number: DIB-LT1-RF Rated power: DC 3V Manufacturer: LS Daewon Co.,Ltd Coontury of Origine : KOREA Date of Registration : 2022.00.00 Registration: 00000 KC Registration Number : R-R-DB8-DIBLT1-RF FCC ID: 2A34P-LT1-RF ICIDIHVIN : 28097-.7 1RF / DIB-LT1-RF CE CODE:
le CE FE es y)
1 | FCC Authorization letter | Cover Letter(s) | 17.89 KiB | October 17 2022 |
FCC Authorization
(September 19, 2022) FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:
We LS Daewon Co., Ltd. the undersigned, Hereby authorizes Bay Area Compliance Laboratories Corp. (New Taipei Laboratory) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratory Corp. (New Taipei Laboratory) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Cheolhui Lee / Deputy general manager Tel: 82-32-570-1971 Fax: 82-32-577-8813 cheolhui.lee@lsdaewon.co.kr 94, Robot land-ro 249beon-gil, Seo-gu, Incheon, Republic of Korea QA-FR-170-B 7/29/2014
1 | FCC Long-term Confidential Authorization | Cover Letter(s) | 22.12 KiB | October 17 2022 |
FCC Confidential Authorization
(September 19, 2022) FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2A34P-LT1-RF In accordance with Sections 0.457 and 0.459 of the Commissions Rules, (LS Daewon Co., Ltd.) hereby requests long-term confidential treatment of information accompanying this application as outlined below:
Block Diagram Schematics Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Cheolhui Lee / Deputy general manager cheolhui.lee@lsdaewon.co.kr / 94, Robot land-ro 249beon-gil, Seo-gu, Incheon, Republic of Korea QA-FR-171-A
1 | Declaration Letter | Attestation Statements | 423.61 KiB | October 17 2022 |
Company Name: LS Daewon Co., Ltd. Add: 94, Robot land-ro 249beon-gil, Seo-gu, Incheon, Republic of Korea Tel: 82-32-570-1971 Fax: 82-32-577-8813 Email: cheolhui.lee@lsdaewon.co.kr RF Declaration Letter 2022-10-12 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern:
The RF Chip/module (TLSR8258F512ET48) supports the following functions:
Zigbee 2440MHz. Now installed in the RF Remote control for an electronic bidet seat (FCC ID: 2A34P-
LT1-RF), only Zigbee 2440MHz are used, other functions will be disabled by software. Consequently, the user cannot access all the frequency bands mentioned above. We, LS Daewon Co., Ltd. assumes the liability against any problems or damages that might occur in relation to this issue. Sincerely Yours, Contact name/ title: Cheolhui Lee /Deputy general manager E-mail: cheolhui.lee@lsdaewon.co.kr
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2022-10-17 | 2440 ~ 2440 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2022-10-17
|
||||
1 | Applicant's complete, legal business name |
LS Daewon Co., Ltd.
|
||||
1 | FCC Registration Number (FRN) |
0031775620
|
||||
1 | Physical Address |
94, Robot land-ro 249beon-gil,Seo-gu
|
||||
1 |
Incheon,, N/A
|
|||||
1 |
South Korea
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
b******@baclcorp.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2A34P
|
||||
1 | Equipment Product Code |
LT1-RF
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
C******** L********
|
||||
1 | Title |
Deputy general manager
|
||||
1 | Telephone Number |
82-32********
|
||||
1 | Fax Number |
82-32********
|
||||
1 |
c******@lsdaewon.co.kr
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | RF remote control for an electronic bidet seat | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power output listed is conducted. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
BAY AREA COMPLIANCE LABORATORIES CORP.
|
||||
1 | Name |
G**** T********
|
||||
1 | Telephone Number |
+886-******** Extension:
|
||||
1 | Fax Number |
+886-********
|
||||
1 |
g******@baclcorp.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2440.00000000 | 2440.00000000 | 0.0006000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC