(Center Console Controller) CCCv2 User Manual Lucid USA, Inc. May 12, 2023 The (Center Console Controller) CCCv2, P11-K2B100 is manufactured by USI Corporation for Lucid USA, Inc (aka Lucid Motors) and provides wireless connectivity to the interior of the vehicle for the infotainment systems. The CCCv2 is installed in the vehicle during manufacturing by a qualified operator as a fully pre-
configured device and starts working as soon as the power is tuned on. The device is completely hidden from the vehicle user and does not require any additional configuration. The frequencies and power levels for the WiFi and Bluetooth are determined by the country code set during manufacturing based upon the destination country of the vehicle. This country code is stored in non-volatile memory during manufacturing and cannot be altered by the user or service technician. The frequency band 5600-5650 MHz is disabled in Canada. The software on the CCCv2 will disable any transmission in this band when the destination country of the vehicle is set to Canada. The CCCv2 can be accessed for repair and maintenance purposes only by a qualified technical service personnel. Changes or modifications made to this equipment not expressly approved by Lucid Motors, Inc. may void the FCC and IC authorization to operate this equipment. FCC Interference Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. IC Antenna Statement Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. IC Licence exempt This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. IC Radiation Exposure Statement This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with greater than 20cm between the radiator & your body. Cet equipement est conforme aux limites d'exposition aux rayonnements ISED etablies pour un environnement non controle. Cet equipement doit etre installe et utilise a plus de 20cm entre le radiateur et votre corps. CE Warning This equipment should be installed and operated with minimum distance between 20cm radiator and human body. This device in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out.