|
app
s
|
Applicant Information
|
|
|
1 2 3
|
Effective |
2024-11-06
|
|
1 2 3
|
Applicant's complete, legal business name |
Lucid USA, Inc
|
|
1 2 3
|
FCC Registration Number (FRN) |
0030133995
|
|
1 2 3
|
Physical Address |
Lucid Motors, Inc 7373 Gateway Blvd
|
|
1 2 3
|
Lucid Motors, Inc
|
|
1 2 3
|
Newark, CA
|
|
1 2 3
|
United States
|
|
|
app
s
|
TCB Information
|
|
1 2 3
|
TCB Application Email Address |
t******@timcoengr.com
|
|
1 2 3
|
TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|
1 2 3
|
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
|
app
s
|
FCC ID
|
|
1 2 3
|
Grantee Code |
2AXZJ
|
|
1 2 3
|
Equipment Product Code |
CTX0710W3
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3
|
Name |
T****** W********
|
|
1 2 3
|
Title |
Technical Specialist
|
|
1 2 3
|
Telephone Number |
51081********
|
|
1 2 3
|
Fax Number |
51064********
|
|
1 2 3
|
E-mail |
T******@lucidmotors.com
|
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
| 1 2 3 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 | Equipment Class | PCB - PCS Licensed Transmitter |
| 1 2 3 | NII - Unlicensed National Information Infrastructure TX |
| 1 2 3 | DTS - Digital Transmission System |
| 1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Telematics Control Unit |
| 1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 3 | Modular Equipment Type | Does not apply |
| 1 2 3 | Purpose / Application is for | Class II Permissive Change |
| 1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 | Grant Comments | Output Power is EIRP and ERP for above and below 1 GHz, respectively. This device must be professionally installed. The antenna(s) used for this transmitter must be installed and operated so as to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2, 4 and 66; LTE of 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Band 7; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; and LTE of 5 and 10 MHz bandwidth modes for FDD LTE Band 13.
Class II Permissive Change: Adds second-source antennas for Wi-Fi and WWAN. Adds second-source EMI components, as described in this filing. |
| 1 2 3 | Output Power listed is the maximum combined conducted output power. The antenna(s) used for this transmitter must be installed and operated so as to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. This device supports 20, 40 and 80 MHz bandwidth modes.
Class II Permissive Change: Adds second-source antennas for Wi-Fi and WWAN. Adds second-source EMI components, as described in this filing. |
| 1 2 3 | Output Power listed is the maximum combined conducted output power. The antenna(s) used for this transmitter must be installed and operated so as to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. This device supports 20 and 40 MHz bandwidth modes.
Class II Permissive Change: Adds second-source antennas for Wi-Fi and WWAN. Adds second-source EMI components, as described in this filing. |
| 1 2 3 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3
|
Firm Name |
Sporton International Inc. Hsinhua Laboratory
|
|
1 2 3
|
Name |
A******** C********
|
|
1 2 3
|
Telephone Number |
886-3********
|
|
1 2 3
|
Fax Number |
+886-********
|
|
1 2 3
|
E-mail |
a******@sporton.com.tw
|
|