USER GUIDE Mic Monitor Long press Rising tone = on Falling tone = off Microphone Mute Short press Rising tone = unmuted Falling tone = muted LED on boom mic illuminates when muted. Surround / Stereo Mode Select HEADSET
[L]
[R]
Game Volume Wheel Game Mute Button Rising tone = unmuted Falling tone = muted Chat Volume Wheel Power LED Solid = ON/Connected Slow Blink = Searching Fast Blink = Battery Low USB Charging Port Microphone Port Power Button Mobile/Xbox Input ACCESSORIES 1 2 Boom Mic Optical Cable 3 4 BASE STATION USB Charging Cable 5 Mic Port Cover [2]
Status LED Solid = ON/Connected Slow Blink = Searching Optical Input Xbox Chat Cable /
Mobile 3.5mm Cable CHARGING MICROPHONE Connect the small end (micro-USB) of the charging cable to the head-
set. Connect the other end to a USB port. The LED on the headset will pulse while charging and turn solid when charging is complete. The LS40 includes an optional boom micro-
phone. When this microphone is removed, an internal microphone is activated. To connect the boom microphone, simply insert it into the port on the bottom of the headset. When battery has less than 15% power remaining, unit beeps twice every 10 minutes. CONNECTING TO CONSOLE [ PS4, PS3, & XBOX ONE ]
STEP 1 STEP 2
!
STEP 3 Connect the wide end of the optical cable to the optical port on the rear of the Console. PS4 Slim does not include an optical output. Requires connection through TV or a separate HDMI to Optical adapter (not included). See our website FAQ. Connect the thin end of the optical cable to the optical port on the side of the Base Station. Plug the Base Station into a USB port on the Console. PLAYSTATION 4 SETUP PS4 PLAYSTATION 3 SETUP PS3 1 Go into Settings > Sound and Screen > Audio Output Settings > Primary Output Port and select Digital Out (Optical) 2 Check the box for Dolby Digital 5.1 3 Go into Settings > Audio Output Settings > Audio Format (Priority) and select Bitstream (Dolby) 4 Go into Settings > Devices > Audio Devices and set both the Input Device and Output Device to USB Headset (LucidSound) 5 Set the Output to Headphone to Chat Audio 6 Set the Volume Control (Headphones) to maximum 1 Go into Settings > Sound Settings > Audio Output Settings > Optical Digital 2 Check the box marked Dolby Digital 5.1 Ch. 3 Go into Settings > Accessory Settings > Audio Device Settings and set the Input Device and Output Device to LucidSound XBOX ONE SETUP XB1 MOBILE Controllers with 3.5mm port 1 Always turn on the headset before turning on the controller 2 Connect one end of the Xbox One chat cable to the 3.5mm port on the headset and the other end to the 3.5mm port on the Controller 3 On the Xbox One, go into All settings > Kinect &
devices > Devices & accessories and choose the Xbox One Wireless Controller in use 4 Select Volume and set Headset volume to maximum and Mic monitoring to minimum. Make sure that Headset mic is turned to On If it appears, set Headset chat mixer all the way to the right for 100% chat 5 6 On the Xbox One, go into All settings > Display &
sound. Under Audio Output select Optical audio and choose Bitstream out. Then select Bitstream format and choose Dolby Digital Controllers without 3.5mm port If the Xbox One Controller does not have a 3.5mm port, an Xbox One Stereo Headset adapter is required (not included). 1 Connect one end of the Xbox One chat cable to the 3.5mm port on the headset and the other end to the 3.5mm port on the Stereo Headset Adapter 2 Adjust the game/chat balance on the Stereo Headset Adapter to 100% chat and increase the volume on the adapter to maximum 3 On the Xbox One, go into All settings >
Display & sound. Under Audio Output select Optical audio and choose Bitstream out. Then select Bitstream format and choose Dolby Digital PC / MAC SETUP PC 1 Connect the dongle to a USB port on the computer and power on the headset 2 3 In the computers sound settings, set the default sound output to LucidSound PC Gaming Audio for game audio In the chat program being used, choose LucidSound PC Chat Audio for both the Input and Output USB audio for stereo use. Optical connection with Dolby Live required for surround sound. 1 Connect one end of the mobile cable to the 3.5mm input on the headset and the other end to the 3.5mm output on the mobile device The headset will only work in passive (OFF) mode. (Note that the volume, EQ, and mute features will not function) 2 3 Press the button on the left earcup to control music, voice commands, and phone calls SUPPORT
?#!*
Model No: LS40RX Model No: LS40TX IC: 21203-16302 IC: 21203-16301 LucidSound, Inc. Made in China This device complies with Industry Canada licence-exempt RSS-247 standard. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0.5 cm between the radiator and your body. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, the Symbol, DTS and the Symbol together, the DTS Headphone:X logo are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. DTS, Inc. All rights reserved. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. 2017 Lucid Sound, Inc. 2150 Palomar Airport Rd., Suite 201, Carlsbad, CA 92011 U.S.A. LucidSound and the Lucid Sound logo, are trademarks of Lucid Sound, Inc., its subsidiaries, and affiliates. The shape and design of this product are a trade dress of Lucid Sound, Inc., its subsidiaries and affiliates. All rights reserved. All other product names and images are trade-
marks or registered trademarks of their respective owners. Made in China. Product features, appearance and specifications may be subject to change without notice. Please retain this information for future reference. United States LucidSound, Inc. warrants this product to be free from defects in materials and workmanship for the warranty period. This non-transferable, 1-year limited warranty is only to you, the first end-user purchaser. If a defect covered by this warranty occurs AND you provide proof of purchase, LucidSound, Inc., at its option, will repair or replace the product at no charge (excluding shipping to LucidSound). The LucidSound, Inc., 1-year limited warranty is available to customers in the United States. Your sole and exclusive remedy is repair or replacement of your LucidSound product. In no event shall LucidSounds liability exceed the original purchase price of the product. This warranty does not apply to: (a) normal wear and tear or abusive use; (b) industrial, professional or commercial use; (c) if the product has been tampered with or modified. To receive warranty service, please contact us at:
Australia Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a 1 year replacement warranty in which you are entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. What you must do:
If a defect has appeared within 90 days from the date of purchase, the product may be returned to the retailer for a replacement. If a defect has appeared after 90 day from the date of purchase, you must initiate a repair by following the online repair process at www.lucidsound.com.au. Once all details are completed, you will receive a return authorisation number. Then label and ship your LucidSound headset including the return authorisation (RA) number, freight prepaid, to LucidSounds authorised repair centre. LucidSound c/o Tecworks International Pty Ltd Unit 1 / 12 Tollis Place Seven Hills NSW 2141 Please ensure the return authorisation (RA) number is prominently displayed on the outside of your packaging. The cost incurred to return the product to the retailer or to the authorised repair centre as part of a Warranty claim are your responsibility. What we will do:
During the Warranty Period, we will, at our option, repair or replace the product or any defective parts. We will also bear the reasonable costs of standard return shipping. If this cannot be done, then we will refund the purchase price to you. AU wholesale distributor:
Bluemouth Interactive Pty Ltd, Level 2, 2 Darling Street, South Yarra, Victoria, 3141 Email: support@bluemouth.com.au lucidsound.com
(toll free) 888-661-4469 1-760-579-6969