Wireless quick-start guide Lutron Smart Bridge, Pico remote control & In-wall dimmer Welcomeand thank you for purchasing a CastaT Wireless kit. In order to control your lights from an app or remote, youll need to replace an existing switch with a CastaT Wireless in-wall dimmer. Before you install the dimmer, please watch the installation video at www.casetawireless.com. We hope you enjoy the convenience of CastaT Wireless!
Double your warranty Love CastaT Wireless dimmers? Have ideas for making them better? Tell us what you think and well extend your warranty by 1 year. www.casetawireless.com/register. Contents supplied Claro wallplate In-wall dimmer
(PD-6WCL)
(CW-1) Pico remote control
(PJ2-3BRL) Wire connectors (3) Screws (2) Lutron Smart Bridge
(L-BDG) Power Supply
(T-5DC-USB) Ethernet Cable P/N 0301715 REV A Tools youll need Flat-head screwdriver Pliers Phillips-head screwdriver Works with energy efficient dimmable light bulbs:
LED up to 150 W Halogen up to 600 W CFL up to 150 W Incandescent up to 600 W NOTE: You can mix and match dimmable LED and CFLs, as well as halogen and incandescent light bulbs, with CastaT Wireless dimmers. Dimmable LED and CFL light bulbs vary in their dimming performance. If youre using these bulbs and they flicker or turn off, please visit www.casetawireless.com/support/lowend for information on adjusting the dimmer for best bulb performance. For a complete list of compatible dimmable LEDs and CFLs, please visit www.casetawireless.com/support/bulblist. Compatible light bulbs include:
Cree BA19-08027OMF-12DE26-1U100 CR6 Ecosmart ECS 30 WW FL 75WE 120 ECS 38 WW FL 90WE 120 Feit A19/DM/LED PAR38/LEDG5 Philips 9290002295 Sylvania LED12A19/DIM/O/827 LED21PAR38/DIM/P/930/FL30 Lutron Electronics Co., Inc. 7200 Suter Road Coopersburg, PA 18036-1299, U.S.A. Installing your dimmer 1 Turn power off at circuit breaker!
2 Remove existing switch from wall Installation for lights with one wall switch (single-pole) Remove the wallplate from switch. F F O WARNING: SHOCK HAZARD. May result in serious injury or death. Turn off power at circuit breaker or fuse before installing. 1 2 3 Remove side sections (if necessary) 4 Connect the dimmer Bend back and forth. 3 2 1 Ground Remove the switch and pull it away from the wall. Do not remove outside side sections on dimmers at the end of gang. 3 4 Disconnect all three wires* from the switch. 5 6 Ground 7 Important note:
Some lights have one wall switch, while others have two or more wall switches (such as stair lights, which have a switch at both the top and bottom of the stairs). Weve included instructions for lights with one wall switch (called a single-pole). If your light has more than one switch (called a 3-way), please visit www.casetawireless.com/support/3way for complete installation instructions and how-to videos. Each dimmer has inside side sections removed. Dimmer at middle has all side sections removed. Important note:
Removing side sections reduces the dimmers maximum wattage rating. See the chart below for maximum wattage information. Maximum* wattage derating chart
(120 V~ 50/60 Hz) Side sections removed LED &
CFL 1 side None 150 W 150 W 150 W 2 sides 1 Connect the bare copper (or green) ground wire from the wallbox to the green wire on the dimmer using a wire connector. 2 Connect either of the remaining wires from the wallbox to either of the remaining wires on the dimmer using a second wire connector. 3 Connect the remaining wire from the wall to the remaining wire on the dimmer using a third wire connector. 5 Mount the dimmer Use the screws provided. Ground
* If your switch has more than 3 wires attached, see Installing CastaT Wireless in a 3-way switch application video on www.casetawireless.com/support/3-way. or*
Incandescent &
Halogen 600 W 500 W 400 W
* For maximum wattage information when mixing light bulb types see www.casetawireless.com/support/ganging. 1 2 6 Attach the wallplate Attach the adapter to the dimmer using the screws provided snap on the wallplate. 1 2 3 snap
(If you installed the dimmer next to other dimmers or switches, youll need to install a wallplate with the correct size/number of openings to accommodate all the devices.) 7 Turn power on at circuit breaker N O Using your CastaT Wireless kit 1 Press and hold off button on dimmer Download the Lutron app Search for Lutron Caseta www.casetawireless.com/LutronApp Lutron 2 Press and hold off button on remote Launch the Lutron app Lutron The Lutron app will walk you through setting up your devices. 3 Press and hold off button on remote Use the Lutron app Control your lights Schedule your lights Connect while away On Brighter (with raised icon) Darker Off FASS Front Accessible Service Switch Replacing light bulbs using FASST Pull the FASST switch out on the in-wall dimmer to remove power at the light socket. On Favorite Darker Off In-wall dimmer Brighter button with raised icon is easy to find in the dark Pico remote control Important notes:
1. For indoor use only 2. Operate between 32 F (0 C) and 104 F (40 C) Add devices PicoR remotes Dimmers Shades Device Ratings In-wall dimmer PD-6WCL 120 V~ 50/60 Hz LutronR Smart Bridge L-BDG 5 V- 300 mA PicoR remote control PJ2-3BRL 3 V- 10 mA
(1) CR2032 battery
(included) Power Supply T-5DC-USB 5 V- 1000 mA Troubleshooting Symptoms Light does not turn on or in-wall dimmer LEDs do not light up. Light does not respond to Pico remote control. Bulbs turn off while being dimmed. Bulbs turn on at high light level but do not turn on at a low light level. Bulbs flicker or flash when dimmed to a low light level. Probable cause and action Light bulb(s) burned out. Breaker is OFF or tripped. Light not properly installed. Wiring error. FASST switch on the dimmer is in the Off position. The dimmer failed to pair with Pico remote control;
see Pairing the dimmer and Pico remote control. The dimmer is already at the light level the Pico remote control is sending. The Pico remote control is outside the 30 ft (9 m) operating range. The Pico remote control batteries are low. The Pico remote control batteries are installed incorrectly. Verify bulbs are marked dimmable and visit www.casetawireless.com/
support/lowend for information on adjusting the dimmer for best bulb performance. Go to www.casetawireless.com/support for additional troubleshooting suggestions. CAUTION Use only with permanently installed fixtures with dimmable LED, dimmable CFL, halogen, or incandescent lamps. To avoid overheating and possible damage to other equipment, do not use to control receptacles, motor-driven appliances, or transformer-supplied appliances. Codes Install in accordance with all national and local electrical codes. Grounding When no grounding means exist in wallbox, the National Electrical Code (NEC) allows a control to be installed as a replacement if 1) a nonmetallic, noncombustible faceplate is used with nonmetallic attachment screws or 2) the circuit is protected by a ground fault circuit interrupter (GFCI). When installing a control according to these methods, cap or remove green wire before screwing control into wallbox. FCC/IC Information This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation. Modifications not expressly approved by Lutron Electronics Co., Inc. could void the users authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Warranty For warranty information, please visit www.casetawireless.com/warranty.
, Claro, and Pico are registered trademarks and FASS Lutron, and Casta are trademarks of Lutron Electronics Co., Inc. NEC is a registered trademark of the National Fire Protection Association, Quincy, Massachusetts Google and the Google logo are registered trademarks of Google Inc., used with permission. Apple is a trademark of Apple Inc., registered in the U.S. and other countries. 2014 Lutron Electronics Co., Inc P/N 0301715 REV A