Installation Instructions Please Read Before Installing Overview The HomeWorks RF Signal Repeater provides additional coverage area for Radio Frequency (RF) signals sent between HomeWorks RF Dimmers/Switches, and RF Keypads. Each RF Signal Repeater covers approximately 2500 square feet (232m2) of living space. Codes: Install in accordance with all local and national electrical codes. Environment: Ambient operating temperature:
0-40C, 32-104F, 0-90% humidity, non-condensing. Indoor use only. Cleaning: Clean with a soft damp cloth only. Do not use any chemical or abrasive cleaners. RF Device Placement: RF Signal Repeaters must be located within 60 feet (18m) of an RF Processor or another RF Signal Repeater. Power: Use only the DC adapter provided by Lutron with your unit (Lutron model # T120-9DC-3-WH). Caution - Using a DC adapter not rated at the following specifications could damage the con-
trol and possibly overheat the DC adapter. Input: AC 120/127V 50/60Hz Output: DC 9V/300mA Class 2 RF Signal Repeater HR-REP-SW 120/127VAC, 50/60Hz (DC Adapter) A U XILIA R Y A C TIV A T E T E S T HR-REP-SW Optional Wall Mounting RF Signal Repeaters may be wall mounted using the supplied wall bracket. Attach wall bracket to wall using the supplied screws and wall anchors. Wrap excess DC Adapter cord around the cord holder. Align Repeater and snap onto wall bracket. UP UP DC Adapter Installation 1. Find a suitable location for the RF Signal Repeater. Place the Repeater in a convenient and accessible location. Note: RF Signal Repeaters should be located within 60 feet (18m) of another RF Signal Repeater or an RF Processor. 2. Apply power to the RF Signal Repeater. Verify Auxiliary LED is lit when powered Plug in power cord and DC adapter Operation AUXILIARY ACTIVATE TEST Function LEDs Test Button Tests whether RF components can hear RF Signal Repeater, and if RF Signal Repeater can hear RF compo-
nents. Activate Button Used when adding RF Signal Repeater to the system. Auxiliary Button LED indicates RF Signal Repeater is powered (button is not used). 2 System Communications Home A: 2500 sq. ft. (232m2) or less - all RF devices within 30' (9m) of RF Processor Notes RF Dimmers and Keypads must be locat-
ed within 30 feet (9m) of an RF Signal Repeater or an RF Processor. Multiple repeaters may be necessary to provide adequate coverage. RF Dimmers cannot be controlled by the system and RF Keypads do not function until they are addressed and programmed. See the HomeWorks Utility online help. RF Tabletop Keypad RF Dimmer RF Keypad 30 Feet (9m) maximum
P/N 292-153 P/N 292 153 RF Processor Home B: 2500 sq. ft. (232m2) or greater - some RF devices more than 30' (9m) from RF Processor RF Tabletop Keypad 30 Feet (9m) maximum RF Signal Repeater RF Dimmer
P/N 292-153 P/N 292 153 RF Keypad RF Processor 30 Feet (9m) maximum 60 Feet (18m) maximum between RF Processors and Repeaters, or between Repeaters 3 HomeWorks Interactive RF Signal Repeater Troubleshooting Symptom Cause and Action Repeater appears not to be working. Orange Auxiliary LED is flashing. No power available to unit. Faulty power supply. Replace power supply. Repeater not programmed. Refer to the HomeWorks Utility online help for program-
ming instructions. Repeater is out of system communication range. Move repeater to within 60 feet (18m) of the RF Processor or another repeater. FCC Information Note: This equipment has been tested and found to comply with the limits for a Class B digi-
tal device, pursuant to Part 15 of the FCC rules. These limits are designed to provide rea-
sonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equip-
ment does cause harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to try to correct the inter-
ference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the seperation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by Lutron Electronics Co. could void the users authority to operate this equipment. Industry Canada Information The term IC: before the radio certification number only signifies that Industry Canada tech-
nical specifications were met. Technical and Sales Assistance If you need assistance, call the toll-free Lutron Technical Support Center. Please provide exact model number when calling.
(800) 523-9466 (U.S.A., Canada and the Caribbean) Other countries call:
Tel: (610) 282-3800 Fax:
(610) 282-3090 Visit our Web site at www.lutron.com Lutron Electronics Co., Inc. 7200 Suter Road Coopersburg, PA 18036-1299 Made and printed in the U.S.A. 11/02 P/N 043-110 Rev. A LIMITED WARRANTY Lutron will, at its option, repair or replace any unit that is defective in materials or manufac-
ture within two years after purchase. After the two year period, a pro-rated warranty applies to this product until eight years after the purchase. For warranty service, return unit to place of purchase or mail to Lutron at 7200 Suter Rd., Coopersburg, PA 18036-1299, postage pre-
paid. Telephone the Lutron Technical Support Center toll free at 800-523-9466. For more information regarding this warranty contact your Lutron representative. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES, AND THE IMPLIED WARRANTY OF MERCHANTABILITY IS LIMITED TO TWO YEARS FROM PUR-
CHASE. THIS WARRANTY DOES NOT COVER THE COST OF INSTALLATION, REMOVAL OR REINSTALLATION, OR DAMAGE RESULTING FROM MISUSE, ABUSE, OR IMPROPER OR INCORRECT REPAIR, OR DAMAGE FROM IMPROPER WIRING OR INSTALLATION. THIS WARRANTY DOES NOT COVER INCIDENTAL OR CONSEQUEN-
TIAL DAMAGES. LUTRONS LIABILITY ON ANY CLAIM FOR DAMAGES ARISING OUT OF OR IN CONNECTION WITH THE MANUFACTURE, SALE, INSTALLATION, DELIVERY, OR USE OF THE UNIT SHALL NEVER EXCEED THE PURCHASE PRICE OF THE UNIT. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Some states do not allow the exclusion or limi-
tation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.This product may be covered by one or more of the following U.S. patents:
4,835,343; 5,736,965; 5,838,226; 5,848,054; 5,905,442; 5,982,103; DES 389,805; DES 404,013 and corresponding foreign patents. U.S. and foreign patents pending. Lutron and HomeWorks are registered trademarks of Lutron Electronics Co., Inc. 2002 Lutron Electronics Co., Inc.