Installation Installing a Wall-Mounted Master Control in a newly installed wallbox. JV Check off Steps as completed. Ba Turn power off at circuit breaker panel or remove fuse from fusebox. Important Wiring Information When making wire connections, follow the recommended strip lengths and com-
binations for the supplied wire connectors. Note: Wire connectors provided are suitable for copper wire only. For aluminum wire, consult an electrician. Small: Twist wire connec-
Strip insulation 3/8" for 14 AWG wire tor tight. Strip insulation 1/2 for 16 or 18 AWG wire Use to join one 14 AWG supply wire with one 16 or 18 AWG control wire. Large:
Strip insulation 1/2" for 10, 12 or 14 AWG wire Strip insulation 5/8" for 16 or 18 AWG wire Use to join one or two 12 or 14 AWG supply wires with one 10, 12, 14, 16, or 18 AWG control wire. Bae Wire the Control. Using the wire connectors provided:
y NS
* Connect the black control wire to the HOT wire coming from the breaker panel.
* Connect the white control wire to the NEUTRAL wire coming from the break-
Operation of the Master Control
| | Step eM Attach wallplate adapter. Mount and align control. Snap on Claroe or Satin Colors wallplate (purchased Tighten screws Snap on waliplate. Be sure no bare wire is exposed. er panel. Wiring Diagram Large Button 120/127V 50/60Hz Neutral Button
( \ 4 . Turns lights on/off.
| - LEDs Glow when associated Room or Scene lights are on. Glow dimly as night light when lights are off. Raise Brighten ROOM or SCENE lights*.
) Lower Dim ROOM or SCENE lights*.
* To select the ROOM or SCENE button you wish to Raise or Lower, quickly tap that button twice. NOTE: Master Controls will not operate until they have been programmed. For detailed instructions on programming your Master Control, refer to the Setup and Installation Guide for a RadioRAs Chronosm System Bridge and Timeclock that is included with a Chronos or the RadioRA Setup Guide that is included with an RF Signal Repeater.