FCC ID: JPZ0149 Lighting Control Hub

Quick-start guide RA2 Select Main Repeater Please read before installing 1 Install the RA2 Select Main Repeater Contents supplied:

RA2 Select Main Repeater*

(RR-SEL-REP2) 5 V- 300 mA A. Connect the Main Repeater B. Connect the power cord to the to your Wi-Fi router using the Ethernet cable. Main Repeater and plug it into an outlet. 0301866 Rev A Main Power cord Outlet Power Supply

(T-5DC-USB) Input: 100240 V~ 50/60 Hz 100 mA Output: 5 V- 550 mA Ethernet cable Router Main Repeater Router 2 Download the Lutron app and walk through setup Ethernet Cable Search for Lutron App

* Connected to a Class 2, LPS, or SELV, limited energy (<15 W) power source only. Extend Your Warranty Love Lutron products? Have ideas for making them better? Tell us what you think and well extend your warranty by 1 year. www.lutron.com/RegisterRA2Select Customer Assistance U.S.A. and Canada: 1.844.LUTRON1 Fax: +1.610.282.6311 Mexico: 1.888.235.2910 Other countries: +1.610.282.3800 www.lutron.com/support Lutron Note: The RA2 Select Main Repeater cannot be used with the RadioRA 2 PC-based programming software. Accessory Setup Code Warranty For warranty information, please visit www.lutron.com/warranty Lutron are trademarks of Lutron Electronics Co., Inc. registered in the U.S. and

)Lutron, Lutron, and other countries. RadioRA 2 is a trademark of Lutron Electronics Co., Inc. Apple is a trademark of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries. Google Play and the Google Play logo are trademarks of Google Inc. 2017 Lutron Electronics Co., Inc. Gua de inicio rpido Repetidor principal del RA2 Select Por favor lea antes de realizar la instalacin Contenido suministrado:

Repetidor principal del RA2 Select *

(RR-SEL-REP2) 5 V- 300 mA Adaptador de alimentacin

(T-5DC-USB) Entrada: 100240 V~ 50/60 Hz 100 mA Salida: 5 V- 550 mA Cable de Ethernet

* Solo debe conectarse a una adaptador de alimentacin tipo Clase2, de alimentacin limita da (LPS), o de seguridad de voltaje extrabajo (SELV), y de energa limitada (<15W). Ample su garanta Le encantan los productos Lutron?

Tiene alguna idea para mejorarlos?

Cuntenos su opinin y extenderemos la garanta por 1 ao. www.lutron.com/RegisterRA2Select Asistencia al cliente E.U.A. y Canad: 1.844.LUTRON1 Fax: +1.610.282.6311 Mxico: 1.888.235.2910 Otros pases: +1.610.282.3800 www.lutron.com/support 1 Instale el repetidor principal del RA2 Select A. Conecte el repetidor principal a su enrutador de Wi-Fi utilizado el cable de Ethernet B. Conecte el cable de alimentacin elctrica al repetidor principal y enchfelo a un tomacorriente. Repetidor principal Cable de Ethernet Cable de alimentacin Tomacorriente Enrutador Repetidor principal Enrutador 2 Descargue la aplicacin de Lutron y proceda a su instalacin Busque Lutron App Lutron Nota: El repetidor principal de RA2 Select no se puede utilizar con el software de programacin RadioRA 2 ubicado en una PC. Garanta Para obtener informacin sobre la garanta, visite www.lutron.com/warranty Lutron son marcas comerciales de Lutron Electronics Co., Inc., registradas en

)Lutron, Lutron, y E.U.A. y en otros pases. RadioRA 2 es una marca comerciales de Lutron Electronics Co., Inc. Apple es una marca registrada de Apple Inc. en E.U.A. y en otros pases. App Store es una marca de servicio de Apple Inc., en E.U.A. y en otros pases. Google Play y el logotipo de Google Play son marcas comerciales de Google Inc. 2017 Lutron Electronics Co., Inc. Guide de dmarrage rapide Rpteur principal RA2 Select Veuillez lire avant linstallation lments fournis :

Rpteur principal RA2 Select *

(RR-SEL-REP2) 5 V- 300 mA 1 Installez le rpteur principal RA2 Select A. Raccordez le rpteur principal votre routeur Wi-Fi au moyen du cble Ethernet. B. Raccordez le cble dalimentation au le rpteur principal et branchez le dans une prise de courant. Rpteur principal Cble dalimentation Prise de courant Alimentation lectrique

(T-5DC-USB) Entre : 100240 V~ 50/60 Hz 100 mA Sortie : 5 V- 550 mA Cble Ethernet Routeur Rpteur principal Routeur Cble Ethernet

* Connect une source dalimentation faible puissance (<15W) de Classe2, LPS

( puissance limite) ou SELV ( trs basse tension de scurit). Extension de votre garantie Vous aimez les produits Lutron? Vous avez des ides pour les amliorer? Dites-

nous ce que vous en pensez et nous prolongerons votre garantie dunan. www.lutron.com/RegisterRA2Select Assistance la clientele tats-Unis et Canada: 1.844.LUTRON1 Fax: +1.610.282.6311 Mexique: 1.888.235.2910 Autres pays: +1.610.282.3800 www.lutron.com/support 2 Tlchargez lapplication de Lutron et suivez les tapes de configuration Rechercher Lutron App Lutron Remarque : Le rpteur principal de RA2 Select ne peut pas tre utilis avec le logiciel de programmation sur PC RadioRA 2. Garantie Pour obtenir des informations sur la garantie, veuillez consulter la page www.lutron.com/warranty Lutron sont des marques dposes de Lutron Electronics Co., Inc., enregistres aux

)Lutron, Lutron, and tats-Unis et dans dautres pays. RadioRA 2 est une marque dpose de Lutron Electronics Co., Inc. Apple est une marque de commerce dApple Inc., dposes aux tats-Unis et dans dautres pays. App Store est une marque de service dApple Inc., dposes aux tats-Unis et dans dautres pays. Google Play et le logo Google Play sont des marques de Google Inc. 2017 Lutron Electronics Co., Inc. FCC/IC Information This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation. Modifications not expressly approved by Lutron Electronics Co., Inc. could void the users authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Informacin de la FCC/IC Este dispositivo cumple con la parte 15 de las reglas de la FFC (Comisin Federal deComunicaciones) y con las normas RSS de IC (Industry Canada) para dispositivos exentos de licencia. La operacin est sujeta a las dos condiciones siguientes: (1)Estedispositivo no debe causar interferencia perjudicial y (2) este dispositivo debe aceptar cualquier interferencia recibida, incluyendo las que pueden causar una operacin indeseada. Cualquier cambio o modificacin sin la aprobacin explcita deLutron Electronics Co., Inc. puede anular la autorizacin del usuario para operar elequipo. Nota: Este equipo ha sido probado y se comprob que cumple con los lmites para dispositivos digitales de ClaseB, de acuerdo con la Parte15 de las Reglas de la FCC. Estos lmites se han diseado para proveer una proteccin razonable contra interferencias dainas en una instalacin residencial. Este equipo genera, usa ypuede emitir energa de radiofrecuencia y si no se instala yutiliza de acuerdo con las instrucciones, puede causar interferencia daina en las comunicaciones de radio. Sin embargo, no hay garanta de que no ocurrir interferencia en una instalacin determinada. Si este equipo causa interferencia daina en la recepcin de la radio ola televisin, que se puede determinar encendiendo y apagando el equipo, elusuario puede tratar de corregir la interferencia mediante uno o ms de los siguientes procedimientos:

Cambiar la orientacin o ubicacin de la antena receptora. Aumentar la separacin entre el equipo y el receptor. Conectar el equipo a un receptculo que est en un circuito diferente al del receptor. Consultar al distribuidor o a un tcnico experimentado en radio/TV para obtener ayuda. Informations sur la FCC/IC Ce dispositif est conforme la partie15 des rgles de la FCC et la (aux) norme(s) CNR dexemption de licence dIndustrie Canada. Son fonctionnement est soumis aux deux conditions suivantes: (1) ce dispositif ne peut pas provoquer dinterfrence, et (2) ce dispositif doit accepter toute interfrence, y compris une interfrence qui pourrait causer un fonctionnement non souhait. Les modifications non expressment approuves par Lutron Electronics Co., Inc. pourront annuler le droit de lutilisateur faire fonctionner cet quipement. Remarque: cet quipement a t test et dclar en conformit avec les limites correspondant un dispositif numrique de catgorieB, en vertu de la partie15 des rgles de la FCC. Ces limites visent fournir une protection raisonnable contre les interfrences prjudiciables dans une installation rsidentielle. Cet quipement gnre, utilise et peut mettre une nergie de frquence radio et, sil nest pas install et utilis conformment aux instructions, peut provoquer une interfrence prjudiciable avec les transmissions radio. Toutefois, il nest pas garanti quaucune interfrence ne se produira dans une installation particulire. Si cet quipement provoque une interfrence prjudiciable la rception radio ou tlvisuelle, laquelle peut tre dtermine en teignant et en mettant en marche lquipement, lutilisateur est invit corriger cette interfrence en prenant lune, ou plusieurs, des mesures suivantes:

Rorienter ou dplacer lantenne de rception. Augmenter la distance entre lquipement et le rcepteur. Brancher lquipement une prise qui se trouve sur un circuit diffrent de celui sur lequel le rcepteur est branch. Consulter le distributeur ou un technicien radio/TV expriment pour toute assistance.

Quick-start guide Lutron Smart Bridge Please read before installing 1 Install the Lutron Smart Bridge Contents supplied:

Lutron Smart Bridge *

(L-BDG, BDG-1 or L-BDGPRO) 5 V- 300 mA Power Supply

(T-5DC-USB) Input: 100240 V~

50/60 Hz 100 mA Output: 5 V- 550 mA A. Connect the Smart Bridge to your Wi-Fi router using the Ethernet cable. B. Connect the power cord to the Smart Bridge and plug it into an outlet. Smart Bridge Ethernet cable Power cord Outlet Router Smart Bridge Router 2 Download the Lutron app and walk through setup Search for Lutron Caseta Ethernet Cable TM Lutron

* Connected to a Class 2, LPS, or SELV, limited energy (<15 W) power source only. Double your warranty Love LutronR products? Have ideas for making them better? Tell us what you think and well extend your warranty by 1 year. www.casetawireless.com/register www.casetawireless.com/LutronApp Apple is a trademark of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries. Accessory Setup Code Warranty For warranty information, please visit www.casetawireless.com/warranty

)Lutron and Lutron are registered trademarks and Lutron Electronics Co., Inc. Google and the Google logo are registered trademarks of Google Inc., used with permission. 2014 2015 Lutron Electronics Co., Inc. TM is a trademark of Lutron Gua de inicio rpido Puente Inteligente Lutron Por favor Lea antes de realizar la instalacin Contenido suministrado:

Puente Inteligente Lutron *

(L-BDG2 o L-BDGPRO2) 5 V- 300 mA Adaptador de alimentacin

(T-5DC-USB) Entrada: 100240 V~

50/60 Hz 100 mA Salida: 5 V- 550 mA 1 Instale el Puente Inteligente de Lutron A. Conecte el Puente Inteligente a su enrutador de Wi-Fi utilizando el cable de Ethernet. B. Conecte el cable de alimentacin elctrica al Puente Inteligente y encfelo a un tomacorriente. Puente Inteligente Cable de Ethernet Cable de alimentacin Tomacorriente Enrutador Puente Inteligente Enrutador 2 Descargue la aplicacin de Lutron y proceda a su instalacin Cable de Ethernet Busque Lutron Caseta

* Solo debe conectarse a una adaptador de alimentacin tipo Clase2, de alimentacin limita da (LPS), o de seguridad de voltaje extrabajo (SELV), y de energa limitada (<15W). Doble su garanta Le encantan los productos LutronR? Tiene alguna idea para mejorarlos? Cuntenos su opinin y extenderemos la garanta por 1 ao. www.casetawireless.com/register TM Lutron www.casetawireless.com/LutronApp Apple es una marca registrada de Apple Inc. en E.U.A. y en otros pases. App Store es una marca de servicio de Apple Inc., en E.U.A. y en otros pases. Garanta Para obtener informacin sobre la garanta, visite www.casetawireless.com/warranty

)Lutron y Lutron son marcas registradas y Lutron Electronics Co., Inc. Google y el logotipo de Google son marcas registradas de Google, Inc., utilizadas con autorizacin. 2014 2015 Lutron Electronics Co., Inc. TM es una marca comercial de Lutron P/N 0301812 REV A Guide de dmarrage rapide Pont intelligent Lutron Veuillez lire avant linstallation lments fournis :

Pont intelligent Lutron *

(L-BDG2 ou L-BDGPRO2) 5 V- 300 mA Alimentation lectrique

(T-5DC-USB) Entre : 100240 V~

50/60 Hz 100 mA Puissance : 5 V- 550 mA 1 Installez le Pont intelligent de Lutron A. Raccordez le Pont intelligent votre routeur Wi-Fi au moyen du cble Ethernet. B. Raccordez le cble dalimentation au Pont intelligent et branchez le dans une prise de courant. Pont intelligent Cble dalimentation Prise de courant Cble Ethernet Routeur Pont intelligent Routeur 2 Tlchargez lapplication de Lutron et suivez les tapes de conguration Cble Ethernet Rechercher Lutron Caseta TM Lutron

* Connect une source dalimentation faible puissance (<15W) de Classe2, LPS ( puissance limite) ou SELV ( trs basse tension de scurit). Doublez votre garantie Vous aimez les produits LutronR?

Vous avez des ides pour les amliorer? Dites-nous ce que vous en pensez et nous prolongerons votre garantie dunan. www.casetawireless.com/register www.casetawireless.com/LutronApp Apple est une marque de commerce dApple Inc., dposes aux tats-Unis et dans dautres pays. App Store est une marque de service dApple Inc., dposes aux tats-Unis et dans dautres pays. Garantie Pour obtenir des informations sur la garantie, veuillez consulter la page www.casetawireless.com/warranty

)Lutron et Lutron sont des marques dposes et Lutron Lutron Electronics Co., Inc. Google et le logo Google sont des marques dposes de Google, Inc., utilises sous autorisation. 2014 2015 Lutron Electronics Co., Inc. TM est une marque de commerce de FCC/IC Information This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation. Modications not expressly approved by Lutron Electronics Co., Inc. could void the users authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Informacin de la FCC/IC Este dispositivo cumple con la parte 15 de las reglas de la FFC (Comisin Federal deComunicaciones) y con las normas RSS de IC (Industry Canada) para dispositivos exentos de licencia. La operacin est sujeta a las dos condiciones siguientes: (1)Estedispositivo no debe causar interferencia perjudicial y (2) este dispositivo debe aceptar cualquier interferencia recibida, incluyendo las que pueden causar una operacin indeseada. Cualquier cambio o modicacin sin la aprobacin explcita deLutron Electronics Co., Inc. puede anular la autorizacin del usuario para operar elequipo. Nota: Este equipo ha sido probado y se comprob que cumple con los lmites para dispositivos digitales de ClaseB, de acuerdo con la Parte15 de las Reglas de la FCC. Estos lmites se han diseado para proveer una proteccin razonable contra interferencias dainas en una instalacin residencial. Este equipo genera, usa ypuede emitir energa de radiofrecuencia y si no se instala yutiliza de acuerdo con las instrucciones, puede causar interferencia daina en las comunicaciones de radio. Sin embargo, no hay garanta de que no ocurrir interferencia en una instalacin determinada. Si este equipo causa interferencia daina en la recepcin de la radio ola televisin, que se puede determinar encendiendo y apagando el equipo, elusuario puede tratar de corregir la interferencia mediante uno o ms de los siguientes procedimientos:

Cambiar la orientacin o ubicacin de la antena receptora. Aumentar la separacin entre el equipo y el receptor. Conectar el equipo a un receptculo que est en un circuito diferente al del receptor. Consultar al distribuidor o a un tcnico experimentado en radio/TV para obtener ayuda. Informations sur la FCC/IC Ce dispositif est conforme la partie15 des rgles de la FCC et la (aux) norme(s) CNR dexemption de licence dIndustrie Canada. Son fonctionnement est soumis aux deux conditions suivantes: (1) ce dispositif ne peut pas provoquer dinterfrence, et (2) ce dispositif doit accepter toute interfrence, y compris une interfrence qui pourrait causer un fonctionnement non souhait. Les modications non expressment approuves par Lutron Electronics Co., Inc. pourront annuler le droit de lutilisateur faire fonctionner cet quipement. Remarque: cet quipement a t test et dclar en conformit avec les limites correspondant un dispositif numrique de catgorieB, en vertu de la partie15 des rgles de la FCC. Ces limites visent fournir une protection raisonnable contre les interfrences prjudiciables dans une installation rsidentielle. Cet quipement gnre, utilise et peut mettre une nergie de frquence radio et, sil nest pas install et utilis conformment aux instructions, peut provoquer une interfrence prjudiciable avec les transmissions radio. Toutefois, il nest pas garanti quaucune interfrence ne se produira dans une installation particulire. Si cet quipement provoque une interfrence prjudiciable la rception radio ou tlvisuelle, laquelle peut tre dtermine en teignant et en mettant en marche lquipement, lutilisateur est invit corriger cette interfrence en prenant lune, ou plusieurs, des mesures suivantes:

Rorienter ou dplacer lantenne de rception. Augmenter la distance entre lquipement et le rcepteur. Brancher lquipement une prise qui se trouve sur un circuit diffrent de celui sur lequel le rcepteur est branch. Consulter le distributeur ou un technicien radio/TV expriment pour toute assistance.

Casta Wireless 12345678 L-2062 (NN 5VF= 300mA FCC ID: JPZ0104 HVIN: BDG-1 IFT: RCPLUCA14-0302 IC: 2851A-JPZ0104 Bridge | Puente | Pont Pats. | Brevets: LB4 Assembled in Mexico lutron.com/patents CB3G4 Ensamblado en Mxico Assembl au Mexique (UL) MAC Address: c US LISTED Cc 20:CD:39:8D:9D:BF 9D10 Appliance Control 0 123-45-678 |ev:

NG yy JPZ0149 HVIN: VLK1 IC: 2851A-JPZ0149

Casta Wireless 12345678 5VF= 300mA IFT: RCPLUCA14-0302 HVIN: BDG-1 FCC ID: JPZ0104 IC: 2851A-JPZ0104 Bridge | Puente | Pont Pats. | Brevets: PB1 Assembled in China lutron.com/patents CB3G4 Ensamblado en China Assembl en Chine (UL) MAC Address: c US LISTED eC 20:CD:39:8D:9D:BF 9D10 Appliance Control 0 123-45-678 |i:

Ne yy) JPZ0149 HVIN: VLK1 IC: 2851A-JPZ0149

RA2 Select RR-SEL-REP2 5VF= 300mA FCC ID: JPZ0104 IFT: RCPLUCA14-0302 Bridge | Puente | Pont Assembled in U.S.A. Ensamblado en E.U.A. Assembl aux E.-U. MAC Address:

20:CD:39:8D:9D:BF 123-45.678 |e ES NG 12345678 HVIN: BDG-1 IC: 2851A-JPZ0104 Pats. | Brevets: NH1 lutron.com/patents CB 3G4 c US LISTED Cc 9D10 Appliance Control yy) JPZ0149 HVIN: VLK1 IC: 2851A-JPZ0149

12345678 HVIN: VLK1 IC: 2851A-JPZ0149 Pats. | Brevets :

lutron.com/patents LB2 CB 3G0 Casta Wireless L-BDG2 5 V 300 mA FCC ID: JPZ0149 IFT: RCPLUCA14-0302 Assembled in U.S.A. Ensamblado en E.U.A. Assembl aux .-U. MAC Address:

20:CD:39:8D:9D:BF 123-45-678

Lutron Electronics Co., Inc. Lutron Electronics Co., Inc. t Lutron Electronics Co., Lutron Electronics Co., Inc. Attestation Statements O: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA accepts the responsibility to act as designated U.S. agent for service of process, provides an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Information:

Company name: Lutron Electronics Co., Inc. Contact Name: Dan Schlegel Address: 7200 Suter Road Coopersburg PA, 18036 Telephone No: +1 610 282 6551 Email: dschlegel@lutron.com U.S. Agent Information:

Company name: Lutron Electronics Co., Inc. Contact Name: Dan Schlegel Address: 7200 Suter Road Coopersburg PA, 18036 Telephone No: +1 610 282 6551 Email: dschlegel@lutron.com Applicant Signature Agent Signature:

(if the agent is different from the applicant Applicant printed name: Dan Schlegel Agent printed name:

RE: Attestation Statements Part 2.911(d)(7} request for JPZ0149

, the undersigned, hereby authorize 0 act as our designated U.S. agent for service of process, accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment.

LUTRON Vise ELECTRONICS CoO., INC Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 lica signature) Dan Schlegel RE: Attestation Statements Part 2.911(d)(5)(i) request for Lutron Electronics Co., Inc. (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. JPZ0149

LUTRON OE (A CC Vee signature) ELECTRONICS CO., ING 7/20/2023 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 Dan Schlegel RE: Attestation Statements Part 2.911(d)(5)(ii) request for Lutron Electronics Co., Inc. (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing

covered equipment.

Date: 10-Jul-23 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 c.c. Eurofins MET Labs 914 West Patapsco Avenue Baltimore, MD 21230 To whom it may concern:

I, the undersigned, hereby authorize EUROFINS MET LABS to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by EUROFINS MET LABS on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing EUROFINS MET LABS as our agent, we still recognize that we are responsible to:

a) b) c) d) e) comply with the relevant provisions of the certification program;

make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;

make claims regarding certification only in respect of the scope for which certification has been granted;

do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized;

upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division;

f) g) h) i) j) use certification only to indicate the products are certified as being in conformity with specified standards;

endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner;

ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division;

keep a record of all complaints made known to the us relating to the products compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested;

take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification;

k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Daniel J. Schlegel 2023-07-07 Daniel J Schlegel Manager - Product Compliance Lutron Electronics Co., Inc.

Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 10-Jul-23 Subject: Long Term Request for Confidentiality JPZ0149 Dear Sir or Madam:

This letter is to formally request long term confidentiality, per the FCC Rules 47 CFR 0.457 and 0.459, for materials or information submitted to the Commission to be withheld from public inspection. For all models in this submission, the following items are Lutron Electronics Co., Inc. confidential information that must be from public inspection by potential competitors to protect our business. 1. Schematic 2. Operation Description 3. Bill of Materials 4. Block Diagram Thank you for your cooperation. Sincerely, Daniel J. Schlegel 2023-07-07 Daniel J Schlegel Manager - Product Compliance

Manufacturers Letter Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 RE: Certification Application Reference FCC ID: JPZ0149 To Whom It May Concern:

Please be advised that the manufacture will ensure that devices covered by the above referenced FCC ID will be constructed in accordance with FCC rules and regulations. Authorized signature: _Daniel J. Schlegel 2023-07-07 ____ Date: 10-Jul-23 Daniel J Schlegel Manager - Product Compliance Lutron Electronics Co., Inc.

LUTRON Representative dschlegel@lu dschlegel@lutron.com TELEPHONE 610-282-3800 Product Model Similarities and Differences for L-BDG2, L-BDGPRO2, and RR-SEL-REP2 This letter is to confirm the following regarding the similarities and differences for L-BDG2, L-

BDGPRO2, and RR-SEL-REP2: These models are electrically and mechanically identical and use the same base firmware. The difference between them is the software programmed in each of the product models to permit use in unique Lutron systems. Marketing differences are listed by model below. The differences in the models:

Do not change the fundamental RF characteristics e Do not degrade the unwanted emissions of the certified product e Do not change the physical characteristics o The same PCB is used in all models o The same enclosure is used in all models o The same RF and non-RF components are used in all models L-BDG2: Is the base Model for Lutron Caseta system L-BDGPRO2: Model sold as part of a kit with additional Lutron Caseta devices and allows support of Lutron Shades and integration with select A/V and Security Systems. RR-SEL-REP2: Model is used for the Lutron RA system as a wireless hub for the lighting controls The PRO level design allows for more features in the system to be added for the Caseta system where the base model (L-BDG2) allows for basic system features the PRO allows for more connectivity such as to third party AV and security systems. The Radio Ra level design is for our Radio Ra system which has additional features and is system for a higher end solution. Applicant Company Name: Lutron Electronics Co., Inc. Address: 7200 Suter Rd. Coopersburg, PA 18036 U.S.A. Telephone No.: 610-282-3800 Fax No.: 610-282-7611 Email:

Certification/Registration Number: JPZ0149 Model Numbers: L-BDG2, L-BDGPRO2, RR-SEL-REP2 Contact Name: Daniel Schlegel Company Name: Lutron Electronics Co., Inc. Address: 7200 Stuer Road Coopersburg PA, USA 18036 Telephone No.: 610-282-3800 Fax No.: 610-282-7611 Email:

7200 Suter Road Coopersburg PA USA 18036 LUTRON DTM 7200 Suter Road TELEPHONE 610-282-3800 Coopersburg PA USA 18036 Signature Signed by: Daniel Schlegel Date: 09/25/2023