FCC ID: 2AYYS-8822K4VTG onn. 4K Streaming Box

Luxshare Precision Industry Co.,Ltd. Limited Agency Agreement

(Luxshare Precision Industry Co.,Ltd.) FCC ID: 2AYYS-8822K4VTG

[18 March 2024]

Federal Communications Commission 445 12th Street SW Washington, DC 20554 Subject:

To Whom It May Concern:

We, Luxshare Precision Industry Co.,Ltd., hereby authorized Intertek Testing Services to act as our Agent for the purpose of preparing application for FCC ID number 2AYYS-8822K4VTG under all applicable parts of the FCC rules and regulations. The effective date of this limited agency agreement is (2024.03.18). The Limited Agency Agreement expires on (2025.03.18), unless sooner terminated or extended by written notice to Intertek Testing Services and the Federal Communications Commission. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. The applicant is not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 U.S.C. 862, and no party to the application is subject to a denial of federal benefits pursuant to that section. If you have any questions or comments, please do not hesitate to contact me. Sincerely, Bin Lin Product Design Engineer

Luxshare Precision Industry Co.,Ltd. Attention: Certification reviewer RE:

Request for Confidentiality FCC ID: 2AYYS-8822K4VTG To Whom It May Concern:

Permanent Confidentiality [Complete this section if permanent confidentiality is requested]

Request to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential:

[Select one or more of items below, as appropriate]

Schematics Block Diagrams Operational Description Tune-up Procedure Parts List Internal Photos (see note) Users Manual (see note) Note 1: Internal Photos may be held confidential 1) if the circuit board or internal components are not accessible to users. For example, it is acceptable if the circuit board is enclosed in epoxy. 2) Also, it is acceptable if the device is not accessible to the public, for example, a device mounted on the top of a large tower (or in a fenced enclosure) such that it is only serviceable by professional designated technicians under a Non-Disclosure Agreement (NDA). All sales for these devices must be under a NDA restricting the disclosure of the propriety information, including internal photos. Users Manual may be held confidential only when the manual contains proprietary technical information intended for professional technicians obligated under a NDA. All sales and distribution of the users manual must be under a NDA that restricts the disclosure of the information. In the application cover letter requesting permanent confidentiality the following additional description and the NDA exhibit is required:

1. Describe in detail how internal photos and/or users manual information are controlled to prevent them from becoming public or disclosed to unauthorized persons. 2. Describe how public access is restricted for products serviceable by professional designated technicians. 3. A statement that all sales of the non-consumer device will be under a NDA to include third party sales and that the final user of the device is subject to the NDA. 4. Provide an example of the NDA between the grantee and a purchaser. The request for confidentiality must Note 2: For scanning receiver, the schematics, block diagrams, operational description, tune-up procedure, parts list and internal photos are always held permanently confidential. Short-term Confidentiality [Complete this section if short-term confidentiality is requested]

Request to withhold from public review for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing, certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept short-term confidential for a period above from the date of the grant

[Select one or more of items below that are not selected in the list above, as appropriate]

Schematics Block diagrams Operational Description Tune-up Procedure 1(2) Parts List Test Setup Photos External Photos Internal Photos Users Manual Rationale for request for confidentiality:

We have invested considerable time and materials in research and development to produce the referenced product. Permanent confidentiality: Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us. Short-term confidentiality: Disclosure of the short-term confidential portions of this application during the period of importation and/or distribution would reveal key aspects of proprietary technology to competitors and diminish the value of our investment in research and development. If you have questions or need further information, please contact the undersigned. Sincerely, _________________ Bin Lin

[Title]Product Design Engineer 18 March 2024 2(2)

Luxshare Precision Industry Co.,Ltd. Attention: Application Examiner Re: Covered List, located at https://www.fcc.gov/supplychain/coveredlist and Report & Order 22-84 located at https://docs.fcc.gov/public/attachments/DOC-389524A1.pdf Applicant: Luxshare Precision Industry Co.,Ltd. FCC ID: 2AYYS-8822K4VTG To whom it may concern, Pursuant to FCC Report & Order 22-84 section IV. Interim Freeze Order, paragraphs 264, 265, and 266, as an authorized representative of Luxshare Precision Industry Co.,Ltd., I attest that the equipment for which we are seeking equipment authorization through certification is not prohibited from receiving an equipment authorization; and Luxshare Precision Industry Co.,Ltd. is not an entity identified on the Covered List or an affiliate or subsidiary of an entity identified on the Covered List, established pursuant to 47 CFR 1.50002. I HEREBY CERTIFY THAT I am authorized to make the representations above on behalf of the company and agree to immediately notify Intertek if there is any change in the status identified above. Bin Lin

[Title] Product Design Engineer Luxshare Precision Industry Co.,Ltd. Form: RFT-AMER-TCB-OP-19m Date: 12/08/2022 Revision: 1 Page 1 of 1

Luxshare Precision Industry Co.,Ltd. Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 SUBJECT: Class II Permissive Charge for FCC ID: 2AYYS-8822K4VTG The product: onn. Full HD Streaming Device Google TV has been granted by FCC dated 01/30/2023, FCC ID: 2AYYS-8822K4VTG. Now we, Luxshare Precision Industry Co.,Ltd., would like to modify the authorized equipment for below changes:

Replace eMMc chips from different manufacturers. The chip replaced pin to pin. replace DDR chips from different manufacturers. The chip is replaced pin to pin. We would like to certify the additional of certified FCC ID: 2AYYS-8822K4VTG as a Class II Permissive Change in this device. Thank you for your attention in this matter. Bin Lin Product Design Engineer 2024-03-18

Luxshare Precision Industry Co.,Ltd. Attention: Application Examiner Re: Certification designating a U.S. agent for service of process pursuant to section 2.911(d)(7) of the FCC rules To whom it may concern, This letter is to confirm both [LUXSHARE-ICT, INC] (Agent) and Luxshare Precision Industry Co.,Ltd.

(Applicant) acknowledge consent to obligations of each party pursuant to 47 CFR part 2.911(d)(7) of the FCC rules in regard to the agent for service of process. I Luxshare Precision Industry Co.,Ltd. HEREBY CERTIFY THAT I am authorized to make the representations above on behalf of the Applicant. I further acknowledge the requirement to maintain an agent extends for no less than one year after the termination of all marketing and importation or the conclusion of and commission-related proceeding involving the equipment and agree to immediately notify the FCC and Intertek if there is any change in the status identified above. Applicant Company Name Contact Name Address : Floor 2, Block A, Sanyo New Industrial Area, West Haoyi Community, Shajing

: Luxshare Precision Industry Co.,Ltd.

: Mr Bin Lin Subdistrict Office, Bao an District Shenzhen, China Telephone No Email FCC ID Applicant FRN

: +86 769 89089000

: Bin.Lin@luxshare-ict.com

: 2AYYS-8822K4VTG

: 0030277669 ___2024/3/18____________________________ Signature: ____________________________________ Date:

I [Kyle Liu] HEREBY CERTIFY THAT I am authorized to make the representations above on behalf of the Agent. I consent to the obligation to accept service of process on behalf of the applicant in regard to the FCC ID designated above. Agent Company Name Contact Name Address Telephone No Email Agent FRN

: LUXSHARE-ICT, INC

: Mr Kyle Liu

: 480 N, Mc Carthy Blvd#280 Milpitas,CA95035 United states

: (408)957-0535 59081

: Kyle.Liu@luxshare-ict.com

: 0033589201 Signature: ____________________________________ Date:

______2024/3/18_________________________ Form: RFT-AMER-TCB-OP-19o Date: 1/25/2023 Revision: 1 Page 1 of 1