companies    
happy holidays!

FCC ID: PQG-XREADER WiFi and Bluetooth Module

by: Lyngsoe Systems Ltd. latest update: 2022-01-04 model: XREADER

Six grants have been issued under this FCC ID from 12/22/2021 to 01/04/2022 (this is one of seven releases in 2022 for this grantee). Public details available include frequency information, manuals, and internal & external photos. some products also feature user submitted or linked password defaults, warrantee terms, instructions, drivers, & troubleshooting guides.
permalink for this FCC identifier
search for: Repair details
from iFixIt
 Replacement
on Amazon
 Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
all frequencies exhibits applications
manual photo label
app s submitted / available
1 2 3 4 5 6 User Manual Addendum Users Manual pdf 71.44 KiB January 04 2022
1 2 3 4 5 6 External Photos External Photos pdf 244.99 KiB December 22 2021
1 2 3 4 5 6 ID Label and Location Info ID Label/Location Info pdf 71.73 KiB December 22 2021
1 2 3 4 5 6 Agent Authorization Cover Letter(s) pdf 112.54 KiB January 04 2022
1 2 3 4 5 6 C2PC Request Cover Letter(s) pdf 323.79 KiB January 04 2022
1 2 3 4 5 6 MPE Evaluation for Co-location RF Exposure Info pdf 65.18 KiB January 04 2022
1 2 3 4 5 6 MPE from FCC ID QV5MERCURY6E-M RF Exposure Info pdf 17.97 KiB January 04 2022
1 2 3 4 5 6 MPE from FCC ID RI7LE910CXNF RF Exposure Info pdf 262.58 KiB January 04 2022
1 2 3 4 5 6 MPE from FCC ID TWYIPJREV RF Exposure Info pdf 1.14 MiB January 04 2022
1 2 3 4 5 6 MPE from FCC ID XMR201906EG21G RF Exposure Info pdf 337.42 KiB January 04 2022
1 2 3 4 5 6 MPE from FCC ID Z64-WL18SBMOD RF Exposure Info pdf 324.29 KiB January 04 2022
1 2 3 4 5 6 Using Original Test Reports Attestation Statements pdf 297.67 KiB January 04 2022
1 2 3 4 5 6 Applicant Change in ID Request Cover Letter(s) pdf 84.26 KiB December 22 2021
1 2 3 4 5 6 Original Grantee Authorization Cover Letter(s) pdf 252.53 KiB December 22 2021
1 2 3 4 5 6 User Manual Addendum Users Manual pdf 71.44 KiB January 04 2022
1 2 3 4 5 6 External Photos External Photos pdf 244.99 KiB December 22 2021
1 2 3 4 5 6 ID Label and Location Info ID Label/Location Info pdf 71.73 KiB December 22 2021
1 2 3 4 5 6 Agent Authorization Cover Letter(s) pdf 112.54 KiB January 04 2022
1 2 3 4 5 6 C2PC Request Cover Letter(s) pdf 323.79 KiB January 04 2022
1 2 3 4 5 6 MPE Evaluation for Co-location RF Exposure Info pdf 65.18 KiB January 04 2022
1 2 3 4 5 6 MPE from FCC ID QV5MERCURY6E-M RF Exposure Info pdf 17.97 KiB January 04 2022
1 2 3 4 5 6 MPE from FCC ID RI7LE910CXNF RF Exposure Info pdf 262.58 KiB January 04 2022
1 2 3 4 5 6 MPE from FCC ID TWYIPJREV RF Exposure Info pdf 1.14 MiB January 04 2022
1 2 3 4 5 6 MPE from FCC ID XMR201906EG21G RF Exposure Info pdf 337.42 KiB January 04 2022
1 2 3 4 5 6 MPE from FCC ID Z64-WL18SBMOD RF Exposure Info pdf 324.29 KiB January 04 2022
1 2 3 4 5 6 Using Original Test Reports Attestation Statements pdf 297.67 KiB January 04 2022
1 2 3 4 5 6 Applicant Change in ID Request Cover Letter(s) pdf 84.26 KiB December 22 2021
1 2 3 4 5 6 Original Grantee Authorization Cover Letter(s) pdf 252.53 KiB December 22 2021

frequency equipment class purpose
1 2022-01-04 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II Permissive Change
2 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
3 2412 ~ 2462 DTS - Digital Transmission System
4 2021-12-22 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 03/27/2018
5 2412 ~ 2462 DTS - Digital Transmission System
6 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter

Application Forms

app s Applicant Information
1 2 3 4 5 6 Effective 2022-01-04
1 2 3 4 5 6 2021-12-22
1 2 3 4 5 6 Applicant's complete, legal business name Lyngsoe Systems Ltd.
1 2 3 4 5 6 FCC Registration Number (FRN) 0004944047
1 2 3 4 5 6 Physical Address 101 Simona Dr., Unit 2
1 2 3 4 5 6 Bolton, Ontario, N/A
1 2 3 4 5 6 Bolton, Ontario, N/A L7E 4E8
1 2 3 4 5 6 Canada
app s TCB Information
1 2 3 4 5 6 TCB Application Email Address v******@ultratech-labs.com
1 2 3 4 5 6 TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
app s FCC ID
1 2 3 4 5 6 Grantee Code PQG
1 2 3 4 5 6 Equipment Product Code XREADER
app s Person at the applicant's address to receive grant or for contact
1 2 3 4 5 6 Name D**** H**** F****
1 2 3 4 5 6 Title President
1 2 3 4 5 6 Telephone Number 64795********
1 2 3 4 5 6 Fax Number 905 5********
1 2 3 4 5 6 E-mail d******@lyngsoesystems.com
app s Technical Contact
n/a
app s Non Technical Contact
n/a
app s Confidentiality (long or short term)
1 2 3 4 5 6 Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
1 2 3 4 5 6 Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
1 2 3 4 5 6 Is this application for software defined/cognitive radio authorization?No
1 2 3 4 5 6 Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
1 2 3 4 5 6 NII - Unlicensed National Information Infrastructure TX
1 2 3 4 5 6 DTS - Digital Transmission System
1 2 3 4 5 6 Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)WiFi and Bluetooth Module
1 2 3 4 5 6 Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
1 2 3 4 5 6 Modular Equipment TypeSingle Modular Approval
1 2 3 4 5 6 Purpose / Application is forClass II Permissive Change
1 2 3 4 5 6 Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 03/27/2018
1 2 3 4 5 6 Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
1 2 3 4 5 6 Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
1 2 3 4 5 6 Grant CommentsSingle Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021) and LSR 2 dBi Rubber Whip/Dipole (P/Ns 001-0012, 080-0013, and 080-014). Class II Permissive Change to allow co-location with Impinj, Inc. RFID Reader Module (FCC ID: TWYIPJREV) / JADAK, a business unit of Novanta Corporation RFID Module (FCC ID: QV5MERCURY6E-M) and/or Quectel Wireless Solutions Co. Ltd. LTE Module (FCC ID: XMR201906EG21G) / Telit Communications S.p.A. LTE Module (FCC ID: RI7LE910CXNF). OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance with the minimum separation distance of 55 cm.
1 2 3 4 5 6 Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II Permissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021) and LSR 2 dBi Rubber Whip/Dipole (P/Ns 001-0012, 080-0013, and 080-014). Class II Permissive Change to allow co-location with Impinj, Inc. RFID Reader Module (FCC ID: TWYIPJREV) / JADAK, a business unit of Novanta Corporation RFID Module (FCC ID: QV5MERCURY6E-M) and/or Quectel Wireless Solutions Co. Ltd. LTE Module (FCC ID: XMR201906EG21G) / Telit Communications S.p.A. LTE Module (FCC ID: RI7LE910CXNF). OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance with the minimum separation distance of 55 cm.
1 2 3 4 5 6 Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products.OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class IIPermissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021) and LSR 2 dBi Rubber Whip/Dipole (P/Ns 001-0012, 080-0013, and 080-014). Class II Permissive Change to allow co-location with Impinj, Inc. RFID Reader Module (FCC ID: TWYIPJREV) / JADAK, a business unit of Novanta Corporation RFID Module (FCC ID: QV5MERCURY6E-M) and/or Quectel Wireless Solutions Co. Ltd. LTE Module (FCC ID: XMR201906EG21G) / Telit Communications S.p.A. LTE Module (FCC ID: RI7LE910CXNF). OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance with the minimum separation distance of 55 cm.
1 2 3 4 5 6 Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II Permissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021) and LSR 2 dBi Rubber Whip/Dipole (P/Ns 001-0012, 080-0013, and 080-014).
1 2 3 4 5 6 Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products.OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class IIPermissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021) and LSR 2 dBi Rubber Whip/Dipole (P/Ns 001-0012, 080-0013, and 080-014).
1 2 3 4 5 6 Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021) and LSR 2 dBi Rubber Whip/Dipole (P/Ns 001-0012, 080-0013, and 080-014).
1 2 3 4 5 6 Is there an equipment authorization waiver associated with this application?No
1 2 3 4 5 6 If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
1 2 3 4 5 6 Firm Name UltraTech Engineering Labs Inc
1 2 3 4 5 6 Name T**** L********
1 2 3 4 5 6 Telephone Number 905-8********
1 2 3 4 5 6 Fax Number 905-8********
1 2 3 4 5 6 E-mail t******@ultratech-labs.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15C CC 2402.00000000 2480.00000000 0.0146000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15E CC 5180 5240 0.0499
2 2 15E CC ND 5260 5320 0.0525
2 3 15E CC 5745 5825 0.0614
2 4 15E CC ND 5500 5700 0.0698
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15C CC 2402 2480 0.0049
3 2 15C CC MO 2412 2462 0.2432
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15E CC 5180 5240 0.0499
4 2 15E CC ND 5260 5320 0.0525
4 3 15E CC 5745 5825 0.0614
4 4 15E CC ND 5500 5700 0.0698
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15C CC 2402 2480 0.0049
5 2 15C CC MO 2412 2462 0.2432
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15C CC 2402.00000000 2480.00000000 0.0146000

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

recent releases: ZD3FTF360 Feitian Technologies Co., Ltd. 2ASCB-DH043TLB D2G Group LLC 2ADYY-T1001W TECNO MOBILE LIMITED 2ASRT-NPX550 Screeneo Innovation SA 2BDUR-3304449 RADIOSHACK WORLDWIDE CORP.

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC