DS-ELSA-E009 Version 1.0 M2COMM ELSA-E 2.9 Inch ESL Tag (For Freezer) Hardware Specification
(Model ES29-F) M2COMMUNICATION Inc. Confidential and Proprietary 1 DS-ELSA-E009 Version 1.0 COPYRIGHT AND DISCLAIMER Copyright 2018 M2COMMUNICATION Inc. All rights reserved. This document is the property of M2COMMUNICATION Inc. It contains information which is confidential and proprietary to M2COMMUNICATION Inc. No part of this document may be copied, reproduced or disclosed to third parties without the prior written consent of M2COMMUNICATION Inc. Disclaimer This document contains confidential information and is subject to the terms and conditions set forth in the Non-Disclosure Agreement between the Recipient Entity and M2Communication, Inc. (M2COMM) The information in this document is believed to be accurate in all respects at the time of publication but is subject to change without notice. M2COMM assumes no responsibility for errors and omissions, and disclaims responsibility for any consequences resulting from the use of information included herein. Additionally, M2COMM assumes no responsibility for the functioning of un-described features or parameters. M2COMM reserves the right to make changes without further notice. M2COMM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M2COMM assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. M2COMM products are not designed, intended, or authorized for use in applications intended to support or sustain life, or for any other application in which the failure of the M2COMM product could create a situation where personal injury or death may occur. Should Buyer purchase or use M2COMM products for any such unintended or unauthorized application, Buyer shall indemnify and hold M2COMM harmless against all claims and damages. Trademarks M2COMM and the M2COMM logo are trademarks or registered trademarks of M2COMMUNICATION INC. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies. Contact Information M2COMMUNICATION Inc. 15F-1, No.32, Gaotie 2nd Road, Zhubei City, Hsinchu County 302, Taiwan, R.O.C. Confidential and Proprietary 2 DS-ELSA-E009 Version 1.0 Revision Control Ver. Date Description of Change Approved 1.0 11/09/2018 First Release Confidential and Proprietary 3 DS-ELSA-E009 Version 1.0 Table of Contents 1. Objective & Scope ............................................................................................ 6 1.1 1.2 1.3 Objective .......................................................................................................................... 6 Scope ............................................................................................................................... 6 Glossary ........................................................................................................................... 6 2. Overview ......................................................................................................... 7 2.1 Operating Frequency ....................................................................................................... 7 3. Key Features and Components ........................................................................ 8 3.1 3.2 3.3 Housing ............................................................................................................................ 8 Power ............................................................................................................................... 8 Display module ................................................................................................................ 8 4. System Physical Constraints ............................................................................. 9 4.1 4.2 4.3 4.4 Power ............................................................................................................................... 9 Installation Environments ............................................................................................... 9 User Replaceable Items ................................................................................................... 9 Service Life ....................................................................................................................... 9 5. Dimensions & Weight .................................................................................... 10 5.1 Material ......................................................................................................................... 10 5.2 Key Dimensions .............................................................................................................. 10 Housing Length x Width x Depth ........................................................................... 10 5.2.1 5.3 Part & Subassembly Dimensions & Tolerances ............................................................. 10 5.4 Weight, Total ................................................................................................................. 10 6. Labeling Requirements .................................................................................. 11 6.1 Unique Tag MAC address and Barcode Label ............................................................... 11 6.2 Manufacturer and Compliance Label ............................................................................ 11 7. Design for the Environment (DFE) .................................................................. 12 7.1 Hazardous Materials in Product or Process .................................................................. 12 8. Serviceability ................................................................................................. 13 8.1 Maintenance Items & Intervals ..................................................................................... 13 8.2 Switches ......................................................................................................................... 13 Confidential and Proprietary 4 DS-ELSA-E009 Version 1.0 9. Thermal ......................................................................................................... 15 9.1 Component Operating Temperature Limits .................................................................. 15 10. Climatic Environments ................................................................................... 16 10.1 Operating Temperature and Humidity .......................................................................... 16 10.2 Shipping/Storage Temperature and Humidity .............................................................. 16 Shipping ................................................................................................................. 16 Storage .................................................................................................................. 16 10.2.1 10.2.2 11. Mechanical, EMC, Environmental & Safety Compliance................................. 17 11.1 Random Vibration ......................................................................................................... 17 11.2 Un-packaged Non-operating Free Fall .......................................................................... 17 11.3 Un-packaged Edge/Corner Drop ................................................................................... 17 11.4 Electromagnetic Compatibility Emissions .................................................................. 17 Radiated Emissions ................................................................................................ 17 Electrostatic Discharge .......................................................................................... 18 11.4.1 11.4.2 11.5 Warning ......................................................................................................................... 18 Federal Communication Commission Interference Statement ............................. 18 11.5.1 11.5.2 CE ........................................................................................................................... 19 11.5.3 NCC ............................................................................................................... 21 12. Part Numbers and Ordering Information ....................................................... 22 Confidential and Proprietary 5 DS-ELSA-E009 Version 1.0 1. Objective & Scope 1.1 Objective This document defines the features and performance requirements for the M2COMM ELSA-E 2.9 inch ESL tag for freezer, to enable the successful integration with the other network equipment required for an ELSA system. To achieve this goal, the requirements detailed within this document will permit an independent evaluation. 1.2 Scope This specification is a definition of the M2COMM ELSA-E 2.9 inch ESL tag for freezer, from a functional and design perspective. This document may be updated as the product design evolves. 1.3 Glossary ESL PCB DPI mm RF mAh ISM PC MAC EMC Electronic Shelf Label Printed Circuit Board Dots Per Inch millimeters Radio Frequency milli-ampere hour Industrial, Scientific and Medical Polycarbonate Media Access Control Electromagnetic Compatibility Confidential and Proprietary 6 DS-ELSA-E009 Version 1.0 2. Overview The M2COMM ELSA-E 2.9 inch ESL tag for freezer is available either a white or black bezel enclosed within a clear plastic housing, and monochrome (Black and White) display. The tag utilizes a high resolution e-paper display for 180 viewing. Communications with the tag is via a unique wireless protocol, M2COMMs proprietary Platanus network, tuned to optimize power consumption and network efficiency. 2.1 Operating Frequency Radio Channel Frequency Range Country/Region 864.25MHz - 867.75MHz Europe 903MHz - 927MHz US Maximum RF Output power: 10.88 dBm (US) Confidential and Proprietary 7 DS-ELSA-E009 Version 1.0 3. Key Features and Components 3.1 Housing The tag housing will consist of three individually molded plastic parts comprised of the front cover, rear PCB/battery housing and the battery access cover. The housing shall be designed to allow easy customer access to the replaceable coin cell batteries. The housing shall be designed for easy access to a recessed wake-up/reset button that will be mounted on the tag PCB assembly. The rear housing shall be designed to accommodate easy assembly to customer shelf level pricing display rails and/or the M2COMM shelving mount. 3.2 Power The rear housing will be designed to accommodate three lithium coin cell batteries 3.3 Display module Custom E-Ink ePaper display (active matrix) Size Pixel Dimensions 2.9 inch 296 x 128 Resolution Active Area
(DPI) 112
(mm) 66.1 x 28.3 Confidential and Proprietary 8 DS-ELSA-E009 Version 1.0 4. System Physical Constraints 4.1 Power 3X Lithium Coin Cell batteries CR2032 Each CR2032 battery energy reservoir is rated 210mAh (at 2.0V) 4.2 Installation Environments The tag shall comply with the requirements defined as a retail signage product, operating within the ISM band frequency range. 4.3 User Replaceable Items Lithium Coin Cell Batteries Locations of recessed tabs for battery cover removal 4.4 Service Life Battery service life may vary according to the use scenario and environment. For reference, the battery life is estimated of 45 months, continuous use at temperature range from 10C to -25C, with one update per day without external interference or system abnormalities. In addition, the following components shall have evidence (from testing and analysis) that they will have the required L10 life in a normal service environment:
Lithium Coin Cell Batteries Confidential and Proprietary 9 DS-ELSA-E009 Version 1.0 5. Dimensions & Weight 5.1 Material Polycarbonate resin, TEIJIN PC Panlite L-1225L series 5.2 Key Dimensions 5.2.1 Housing Length x Width x Depth Dimensions are in mm Dimensional tolerance 0.25mm 5.3 Part & Subassembly Dimensions & Tolerances Full dimensional tolerance analysis and critical-to-function analysis will be performed on the following;
PCBA module Housing 5.4 Weight, Total Assembled weight is 42g maximum, excluding transit packaging, documents, accessory kit, etc. Confidential and Proprietary 10 DS-ELSA-E009 Version 1.0 6. Labeling Requirements Each tag shall carry the following labels. 6.1 Unique Tag MAC address and Barcode Label Barcode shall be Code 128 compliant Label shall be adhered to the bottom edge of the tag as shown above. 6.2 Manufacturer and Compliance Label The manufacturer and compliance label shall be adhered to the rear of the tag as shown above. Confidential and Proprietary 11 DS-ELSA-E009 Version 1.0 7. Design for the Environment (DFE) 7.1 Hazardous Materials in Product or Process No components or process containing the following material maybe used;
Beryllium Oxide Cadmium Silicone Mercury Chlorinated paraffin's Poly Chlorinated Biphenyl (PCB) Polychlorinated Naphthalene (PCN) Poly Chlorinated Triphenyl (PCT) Poly Brominated Biphenyl Ethers/Oxides (PBBE/PBBO) Tetra Brominated Biphenyl A (TBBA) Chlorofluorocarbons (CFC) Class 1 Ozone-depleting substances Coin Cell type batteries contain mercury, silver, cadmium, lithium, or other heavy metals as their main component and should be disposed off in accordance with country/region regulations. Confidential and Proprietary 12 DS-ELSA-E009 Version 1.0 8. Serviceability 8.1 Maintenance Items & Intervals No subsystems or components shall require scheduled maintenance intervals. 8.2 Switches The tag will be fitted with a multi-function switch, in the form of a momentary action switch. The switch shall be located on the PCB and will be accessible via a hole in the side of the rear cover to protect against accidental operation. Switch Functions;
I. Wake up (Short Press) II. Deep Sleep (Long Press for 3~5 seconds) III. Show Device Barcode Address and firmware version (Double-click) Confidential and Proprietary 13 DS-ELSA-E009 Version 1.0 IV. Show Devices detailed information (Double-click) V. Show Main Image (Double-click) Confidential and Proprietary 14 DS-ELSA-E009 Version 1.0 9. Thermal 9.1 Component Operating Temperature Limits In any permitted configuration, all the tag components shall remain within the component manufacturers' normal operating specifications. Confidential and Proprietary 15 DS-ELSA-E009 Version 1.0 10. Climatic Environments All tag features shall function normally in the operating ranges listed below. All tag features shall endure the non-operating ranges listed below without cosmetic or functional damage. 10.1 Operating Temperature and Humidity
-25C to +10C, 16 hrs dwell at extreme; IEC 60068-2-1 35% to 55% RH at 40C, non-condensed; IEC 60068-2-3 10.2 Shipping/Storage Temperature and Humidity 10.2.1 Shipping Temperature: -20C to +50C 35% to 80% RH Humidity:
Duration:
<240 hours (10 days) 10.2.2 Storage Temperature: 0C to +40C Humidity:
Duration:
35% to 80% RH
<6 months Confidential and Proprietary 16 DS-ELSA-E009 Version 1.0 11. Mechanical, EMC, Environmental & Safety Compliance 11.1 Random Vibration 1 to 200 Hz, 1.15 Grms, 30 minutes in Z axis, 10 minutes in X, Y and Z axes 11.2 Un-packaged Non-operating Free Fall 500mm drop height; 3 drops onto unit bottom face; IEC 60068-2-32. 11.3 Un-packaged Edge/Corner Drop 800mm drop height; 6 drops onto bottom face; IEC 60068-2-31. 800mm drop height; 3 drops onto each corner, 12 drops total; 3 drops onto each edge, 12 drops total; IEC 60068-2-31. 11.4 Electromagnetic Compatibility Emissions 11.4.1 Radiated Emissions CE (Europe):
The Product shall comply with EN300220 Short Range Devices for radiated emissions. FCC (USA):
The Product shall comply with FCC Part 15 Subpart B and Subpart C requirements. The limit for this product shall be Class B of the FCC Part 15 Subpart B requirements. The equipment was passed the test performed according to FCC Part 15 Subpart B and Subpart C requirements. GITEKI (Japan):
The product shall comply with GITEKI ARIB-STD-T108. The limit for this product shall be in accordance with MIC standard for specific radio equipment specified in Article 2, item 8. NCC (Taiwan):
NCC certification is required. NCC requires an accredited laboratory to perform the testing. The limit for this product shall be Class B of LP0002. The equipment was passed the test performed according to LP0002 class B. C-Tick (Australia):
C-Tick certification is required. The equipment was passed the test performed according to AS/NZS CISPR 32 Class B. ETSI (Europe):
The product shall comply with EN300220. The limit for this product shall be Class B of EN300220. The requirement was passed the test performed according to EN300220 Class B. Confidential and Proprietary 17 DS-ELSA-E009 Version 1.0 11.4.2 Electrostatic Discharge CE (Europe):
The Product shall comply with EN55024: 2010. The test method used shall be EN61000-4-2. The test level to be used is 4kV air discharge and 2kV contact discharge. 11.5 Warning 11.5.1 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver Increase the separation between the equipment and receiver. is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Confidential and Proprietary 18 DS-ELSA-E009 Version 1.0 11.5.2 CE This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. National Restrictions - This device is intended for home and office use in all EU countries (and other countries following the EU directive 2014/53/EC) without any limitation except for the countries mentioned below:
Country Bulgaria Restriction None France Indoor use limited to 10 mW e.i.r.p. within the band 865~868 MHz Italy None Luxembourg None Norway Implemented Reason/Remark General authorization required for outdoor use and public service Military Radiolocation use. Refarming of the 2.4 GHz band has been ongoing in recent years to allow current relaxed regulation. Full implementation planned 2012 If used outside of own premises, general authorization is required General authorization required for network and service supply(not for spectrum) This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-lesund Only for indoor applications Russian Federation None Europe - EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 2014/53/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 2014/53/EC:
EN 300220, EN 301489-1/-17, EN 301489-1/-13, EN 62311 MPE, EN 60950-1 standard. Declaration of Conformity (DoC) This equipment may be operated in:
AT EE IT PT BE FI LV RO BG HR FR DE LT SK CY EL HU LU MT NL SI CZ DK IE PL SE UK ES Confidential and Proprietary 19 DS-ELSA-E009 Version 1.0 Bulgarian Czech esky Danish Dansk Dutch Nederlands English Estonian Eesti Finnish Suomi French Franais German Deutsch Greek Hungarian Magyar Italian Italiano Latvian Latviski Lithuanian Lietuvi Maltese Malti
, M2COMM , 2014/53/EC. Edge-Core tmto prohlauje, e tento Electronic Shelf Labels, ESL je ve shod se zkladnmi poadavky a dalmi pslunmi ustanovenmi smrnice 2014/53/ES. Undertegnede M2COMM erkl rer herved, at flgende udstyr Electronic Shelf Labels, ESL overholder de v sentlige krav og vrige relevante krav i direktiv 2014/53/EF. Hierbij verklaart M2COMM dat het toestel Electronic Shelf Labels, ESL in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 2014/53/EG. Bij deze Accton dat deze Electronic Shelf Labels, ESL voldoet aan de essentile eisen en aan de overige relevante bepalingen van Richtlijn 2014/53/EC. Hereby, M2COMM, declares that this Electronic Shelf Labels, ESL is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EC. Kesolevaga kinnitab M2COMM seadme Electronic Shelf Labels, ESL vastavust direktiivi 2014/53/E phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele. Valmistaja M2COMM vakuuttaa tten ett Electronic Shelf Labels, ESL tyyppinen laite on direktiivin 2014/53/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen. Par la prsente M2COMM dclare que l'appareil Electronic Shelf Labels, ESL est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 2014/53/CE. Hiermit erklrt M2COMM, dass sich dieser/diese/dieses Electronic Shelf Labels, ESL in bereinstimmung mit den grundlegenden Anforderungen und den anderen relevanten Vorschriften der Richtlinie 2014/53/EG befindet". (BMWi) Hiermit erklrt M2COMM die bereinstimmung des Gertes Electronic Shelf Labels, ESL mit den grundlegenden Anforderungen und den anderen relevanten Festlegungen der Richtlinie 2014/53/EG. (Wien) M2COMM Electronic Shelf Labels, ESL 2014/53/. Alulrott, M2COMM nyilatkozom, hogy a Electronic Shelf Labels, ESL megfelel a vonatkoz alapvet kvetelmnyeknek s az 2014/53/EU irnyelv egyb elrsainak. Con la presente M2COMM dichiara che questo Electronic Shelf Labels, ESL conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 2014/53/CE. Ar o M2COMM deklar, ka Electronic Shelf Labels, ESL atbilst Direktvas 2014/53/EK btiskajm prasbm un citiem ar to saisttajiem noteikumiem. iuo M2COMM deklaruoja, kad is Electronic Shelf Labels, ESL atitinka esminius reikalavimus ir kitas 2014/53/EB Direktyvos nuostatas. Hawnhekk, M2COMM, jiddikjara li dan Electronic Shelf Labels, ESL jikkonforma mal-tiijiet essenzjali u ma provvedimenti orajn relevanti li hemm fid-
Dirrettiva 2014/53/EC. Confidential and Proprietary 20 DS-ELSA-E009 Version 1.0 Polish Polski Portuguese Portugus Romanian Roman Slovak Slovensky Slovenian Slovensko Spanish Espaol Swedish Svenska Swedish Svenska Turkish Turk Notes:
Niniejszym M2COMM owiadcza, e Electronic Shelf Labels, ESL jest zgodny z zasadniczymi wymogami oraz pozostaymi stosownymi postanowieniami Dyrektywy 2014/53/EC. M2COMM declara que este Electronic Shelf Labels, ESL est conforme com os requisitos essenciais e outras disposies da Directiva 2014/53/CE. M2COMM declar c acest dispozitiv fr fir respect cerinele eseniale precum i alte dispoziii relevante ale Directivei 2014/53/EC. M2COMM tmto vyhlasuje, e Electronic Shelf Labels, ESL spa zkladn poiadavky a vetky prslun ustanovenia Smernice 2014/53/ES. M2COMM izjavlja, da je ta Electronic Shelf Labels, ESL v skladu z bistvenimi zahtevami in ostalimi relevantnimi doloili direktive 2014/53/ES. Por medio de la presente M2COMM declara que el Electronic Shelf Labels, ESL cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 2014/53/CE. Hrmed intygar M2COMM att denna Electronic Shelf Labels, ESL str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 2014/53/EG. Hrmed intygar M2COMM att denna Electronic Shelf Labels, ESL str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 2014/53/EG. M2COMM bu kablosuz cihazn temel gereksinimleri ve 2014/53/EU yonergesindeki ilgili koullar karladn beyan eder. The regulatory limits for maximum output power are specified in EIRP. The EIRP level (in dBm) of a device can be calculated by adding the gain of the Antenna used (specified in dBi) to the output power available at the connector (specified in dBm). 11.5.3 NCC Confidential and Proprietary 21 DS-ELSA-E009 Version 1.0 12. Part Numbers and Ordering Information The M2COMM ESL tag part numbering system is based upon tag size, color and country/region operating frequency, please refer to Section 2.1 for country/region radio channels; shown below are the part numbers available for the 2.9 inch tag. Part Number Frequency Color Remarks PED29FN75RES9 TBD 915MHz 868MHz ELSA-E Black, White Black, White Freezing Option Freezing Option Confidential and Proprietary 22