MM3 MANUAL Please read the safety guide before use and it in a proper manner. use and it in a proper manner. All the information of user manual and programs in CD can be downloaded at the m3mobile homepage. Note
This manual is subject to copyright protection along with all relevant rights. No part of this document can be copied, reproduced, changed or translated in whole or in part by any means without prior written consent of M3 Mobile Co., Ltd. The content of the manual is provided as-is and be subject to change at any time without notice.
M3 Mobile Co., Ltd. makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
Microsoft, ActiveSync, Windows, Windows logos, Windows Mobile 6.1 logos are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries. Microsoft OEM products are licensed by Microsoft Licensing Inc., a entirely owned subsidiary of Microsoft Corporation. th All i All other product names in this document or product are company names, trademarks or registered trademarks of the respective owners. d t d thi d d t d t t d i t k k t
2 Copyright and Agreement
This user manual is provided as-is. It may contain editing error or omitting due to the difficulty of expressing technical feature. If an application program provided by other supplier using by MM3, refer to the supplier for a program manual. The application program providers have the responsibility of indicating their contact number for customer The application program providers have the responsibility of indicating their contact number for customer service on MM3 terminal, item box, or program.
M3 Mobile Corporation do not warranty any programs produced and added by the third software companies after MM3 products are distributed from factories.
M3 Mobile Corporation has the right to ask warranty of any programs to the program providers to meet the
M3 Mobile Corporation has the right to ask warranty of any programs to the program providers to meet the
needs of mobile networking companies. The contents in the users manual are protected under the Software Copyright Act. Copy, reproduction, distribution of the contents in the users manual without any written agreement notice of M3 Mobile Co. Ltd., is considered as criminal actions.
Windows, MS Office, Outlook, ActiveSync, Internet Explorer programs are the registered brand of Microsoft.
MM3 is the registered brand of M3 Mobile Co. Ltd.
The brands of other products and service referred in this manual belong to corresponding providers. 3 Caution when using MM3 (1)
User Caution When the unit is lost or stolen, notify to network provider immediately. Do not rent the unit to third person without authorized permission. Do not use the unit while driving Do not use the unit while driving. For technical help, contact designated service centers. Contact responding suppliers directly for questions on applications and work programs other than hardware and basic installed applications. Use supplied adapter and accessories by M3 Mobile Co. Ltd. Use supplied adapter and accessories by M3 Mobile Co Ltd Any defect on a unit while using other batteries, chargers and accessories can not get warranty.
Carrying and Storage Caution th d i A id t f t lit Avoid to use the device under high temperature and humidity. It may cause fatality to the device. Avoid intentional dropping from high elevation. It may cause fatality to the device. Charge batteries fully before the first time use of the device. th d i hi h t d h idit It d t t 4 Caution when using MM3 (2)
Do not reconstruct Do not reconstruct MM3 for any purpose. It may cause fire in the unit, and wound or electric shock to users. Any defect caused by reconstructing units can not get warranty Any defect caused by reconstructing units, can not get warranty.
Illegal copy of mobile phone is prohibited The person who reproduces mobile phone and uses this mobile phone is considered as criminals. Th t The use of lost or stolen mobile phone is considered as a criminal act. Keeping the lost or stolen mobile phone after turning power off, is considered as a criminal act. t l bil f l id h d t l i i i 5 Size and Features Used frequency bands Tri-Band : UMTS / HSDPA 850 / 1900 / 2100 MHz Quad-Band : GSM GPRS 850 / 900 / 1800 1900 MHz Band width External appearance Weight Weight Operational Temperature Main body Adapter Relative Humidity AC Power 200 KHz (GSM) / 5MHz (3G) 88 x 215 x 61mm (Width x length x height) 570g (battery included) 570g (battery included)
-20 ~ +50
-20 ~ +50 5% ~ 80%
Input : AC 100 ~ 250V, 50 ~ 60Hz Output : DC 5.2V, 5A 6 Supported Frequency Bands can differ depending on the supplied antenna. Contents
Note
Copyright and Agreement
Caution when using MM3 i MM3 C ti h
Size and Features S T N T 1. MM3 Introduction 1. MM3 Introduction E T N O C Product Composition Name and function of each part I Input Buttons B Soft/Hard Reset How to use stylus pen 7 2 3 4 4 6 9 9 10 12 13 13 14 15 LED/Battery attaching/detaching Charging How to connect to PC 2. Basic Usage Main screen Input screen 3. ActiveSync ActiveSync Introduction Installing ActiveSync Synchronization of data 16 17 18 19 20 21 26 27 28 29 Contents 4. How to use internet Via HSDPA Via Wireless WLAN Browsing the Web Site 5. How to use the Phone Init Screen Init Screen Phone Control Phone call and receive Ph b k Phone book SMS send and receive S T N E T T N O C 8 6. Usage of Device Camera Bluetooth GPS Scanner 47 48 52 56 57 30 31 33 36 41 42 42 43 44 45 45 46 1. Introduction 1. Introduction iti Product Composition P d t C Name and Function of each part(MC-8000S) Input Buttons Soft/Hard Reset Soft/Hard Reset How to use Stylus pen LED Battery Attaching/Detaching Charging Charging How to connect to PC 9 Product Composition (1) At the first time of opening the product box please check if it contains all the basic
At the first time of opening the product box, please check if it contains all the basic components, listed as following. n o i t c u d d o r t n I 10 MM3 main terminal MM3 main terminal
+ 2 units of standard battery Cradle USB Cable P t bl Ad t Portable Adapter CD CD MANUAL MANUAL The product components may differ depending on the supplied products. Product Composition (2)
How to use the manual This manual provides detailed information to make using the device easier and faster. The content related to phone or communication in this manual is only applicable when the device is equipped with HSDPA module for Voice and Data communication. q pp The features described in this manual can not be used when it is not equipped in the device (WWAN, WLAN, Bluetooth, Scanner, Camera, GPS). The content of this manual is subject to change without prior notice due to product improvement or modification of its functions, etc.
, n o i t c u d d o r t n I 11 Names of each part (MC-8000S) Scanner Barcode Scanner Window n o i t c u d d o r t n I LCD touch Screen Scanner B Button Charge LED Scanner LED Reset Switch HSDPA KeyPad 12 IO Port Battery Pistol grip Battery Lock Camera Flash Stylus Pen Mini SD Extension Slot SIM Card Slot Input Button Alphanumeric button Send button Navigation button End button Power button Component Power button Description Press to toggle the device on/off. Long press to menu (Backlight, Display, etc) Function Phone/Call function press to accept the call or to execute the phone End function Input keys press to hang-up/reject the call. Press to input alphabet characters or numbers Left, right function button press to lunch an assigned application or function Alphanumeric Alphanumeric press to switch between alphabet and number input press to switch between alphabet and number input Start button Press to display the Start menu. Backspace button press to move back Function button press to Function Key with (*, 0, #) Di Direction button b i press to move left,right and up,down i h l f d d Backspace button Return button press to confirm the action Scanner button Press to launch the barcode data scan application Camera button Press to launch the Pictures & Videos Volume button Press the top key to increase volume, press the bottom key to decrease volume. Some key functions might not be supported, depending on the option. n o i t c u d d o r t n I 13 Soft/Hard Reset
n o i t c u d d o r t n I 14 S ft R t Soft Reset
- A soft reset allows your device to get a fresh start, similar to rebooting a computer.
- This restarts your device and adjusts memory allocation.
- All records and entries are retained after a soft reset.
- Unsaved data in open programs may in some cases be lost.
Hard Reset
- A hard reset removes power to your device.
- This erases all records and entries, deletes all additional programs you have installed, and restores the devices default factory settings factory settings.
- Never perform a hard reset unless a soft reset does not correct your problem. Please mind that you need to set up the standard timezone date, and time. After power off. How to use Stylus Pen
Tap Tap the touch screen one time using a Stylus pen to select and execute items and files.
Drag It is used when you select the text. Please drag the desired part with stylus pen attached on the screen. Long Press
Leave Stylus pen touching the screen for long and you can select the menu for long and you can select the menu on the pop-up screen. You can also select functions available in the designated item using the pop-
up menu. The function of the pop-up menu can be different according to the program. n o i t c u d d o r t n I 15 LED / Battery attaching/detaching
LED Alarm Informs Charging, Scanner Status. Type LED Status Details LED for charging R d Red Green i Ch Charging Charging complete Blue Blinking Blue On Blue OFF WWAN Standby
(within range of phone/internet) WWAN in use
(phone/SMS/internet in use) WWAN is off or out of range Green When the barcode data is successfully read WWAN Status LED Scanner LED
Battery attaching/detaching Attaching Battery As picture shown, put the battery pack to back of PDA, and lock the battery pack with locking device. D t hi Detaching Battery Press locking device to the right, then using upper notch, detach the battery from main body. B tt n o i t c u d d o r t n I 16 Charging
Connect plug in from charger to charge jack of main Connect plug-in from charger to charge jack of main body, or charge jack of cradle, and then place main body onto cradle. Charging LED Type LED Status Direct charging to main body Cradle Charging
(Extra battery charging) Red Green Red Green Details Charging Charging Complete Charging Charging Complete
Charging in Cradle Charging in Cradle Separate Battery p Separate Battery y Charging LED
When charging, the status of the battery attached to main body can be confirmed by the LED left of upper corner of main body Also the status of Sub-battery corner of main body. Also the status of Sub battery can be confirmed by the LED right of low corner of Cradle. Do not use any other charger except one (5.2 V / 5A) provided . Make sure to handle it gentle; damage with excessive force may cause no warranty. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. When attached battery is completely discharged, plug charger to main body, then reset the device to check if screen is back on. To use, do at least 10 minute charging. n o i t c u d d o r t n I 17 How to connect to PC
A cradle of MM3 supports charging and USB connection. Connecting step of cradle of MM3 is as following. Connect charger to MM3 cradle. (DC JACK) Connect charger to power source. (to wall) Connect USB cable of MM3 cradle to USB port of desktop PC. Place MM3 onto docking cradle then execute Synchronization with Desktop PC. The location of USB port can be at the back, front or side of PC and the shape of USB port is identical on Desktop PC and and the shape of USB port is identical on Desktop PC and Notebook. USB host function is available by putting USB cable into USB port of Cradle. AC Power Client Series Host
(Option) Ethernet
(Option) Connecting to Cradle n o i t c u d d o r t n I 18 2. Basic Usage 2. Basic Usage Main screen Input Screen 19 Main Screen
Main screen Main Screen is set below Start menu User info Task info Lock info e g a s U c i s a B 20 Info bar Day/Time info Wireless info Messages info Button function Start menu Select the program you want to use. Info bar View the power, modem, sound, input mode and connecting view. Day/Time info View the current date and time. Wireless info View the Wireless power and state. p User info View the personal information. Messages info View the Messages received. Task info Today info Lock info View the task information. View the Todays information. View the screen / Lock information. Left/Right Function info Pocket MSN info View the Pocket MSN information. Left/Right Function info Left/Right Function info View the Left / Right information View the Left / Right information. Input Screen (1)
To use Input
- Process this program " Start > Office Mobile > Word Mobile".
To use the Keyboard Input p y e g a s U c i s a B 21 Tap the arrow next to the keyboard icon and then select h k b the keyboard on the menu screen as a picture above. h d This is the Keyboard Input Screen. You can input the letter, number and characters when you click the each icon on the keyboard Input screen. Input Screen (2)
Usage of Block Recognizer input. e g a s U c i s a B 22 Tap the arrow next to the keyboard icon and then select the Block Recognizer on the menu screen as a picture above i t b It is the screen of block recognizer input. In this input screen you can input letters in 'abc' and numbers in '123 each in the input box seen on the screen screen. In the input screen of block recognizer you can input special letters and characters by tapping th i the input box once. t b Input Screen (3)
Usage of Letter Recognizer e g a s U c i s a B 23 Select the arrow next to the keyboard icon and then Select the
'Letter Recognizer' on the menu screen as the picture above. i t th b This is the 'Letter Recognizer'
screen. In the Letter Recognizer' input screen, you can input the capital letters in 'ABC', the small letters h in 'abc' and numbers in '123' each i in the input box seen on the screen.
'123'
' b '
d b i Please choose Options on the input menu. Select Letter Recognizer as input method and then click Options. Here you can configure the i input modes. d t Input Screen (4)
Using transcriber input Transcriber is a writing recognizer program. It provides you various writing input and input menu. e g a s U c i s a B 24 Select the arrow next to the keyboard icon and then select the Transcriber on the menu like the picture. This is the Transcriber input screen. If you input letters, numbers and characters on the screen with the stylus pen, it would be written automatically on the place where the cursor is blinking. You do not have to concern about the input box when using transcriber. Input Screen (5)
Input by using Keypad You can input numbers and letters by using Keypad. Yellow Key :
Yellow Key :
As you push the yellow key button, you can see the yellow text through a display of the main terminal. Blue Key :
As you push the blue key button, you can see The blue text through a display of the main terminal. e g a s U c i s a B 25 3 ActiveSync 3. ActiveSync ActiveSync Introduction Installing ActiveSync Synchronization of Data ActiveSync Introduction
Sync is an abbreviation of Synchronization and refers to the process of making data in PDA and desktop computer to be same by linking both data. Sync is an abbreviation of Synchronization and refers to the process of making data in PDA and desktop computer to be same by linking both data. When either PDA or PC modifies data, it updates others to the most recent data. g p p y
, Not all the data is synchronized at same time. It follows the option settings of ActiveSync, provided by Microsoft.
By linking MM3 and computer, you can make data in both devices in the same status y
(synchronization) or install, copy, move, delete programs for business purpose and others.
, y g p
It is compulsory to install this program in order to install business programs, synchronize data, back up and synchronize contact numbers in an address book, etc. Do not connect USB of Cradle to desktop PC before installing Active Sync to desktop PC.. It may cause a desktop PC cannot recognize PDA since Active Sync contains PDA program driver. c n y S e e v i t c A 27 ActiveSync install / connect
To install ActiveSync
-
Select the ActiveSync program in the CD provided, and then install it to the computer. Once the installation is complete, connecting window will start. Connect the cradle with PC using USB cable, and then dock the device on the cradle. When the device is recognized on the PC, Connection will be established after assigning the port for it automatically.
The definition of Partnership p It is the process of paring PC with PDA in order to exchange the data each other. Via this process, the data on the PC and on the PDA can be synchronized. The synchronization is available with Outlook 2003 or above version. It is The synchronization is available with Outlook 2003 or above version. It is not supported on the outlook express which is provided together with Windows OS. Please re-try the synchronization if connection is disturbed by strong noise or static. To install ActiveSync on the host computer, download version 4.1 or higher from the Microsoft web site at http://www.microsoft.com. Refer to the installation included with the ActiveSync software. Microsoft recommends installing ActiveSync on the host computer before connecting the mobile computer. c n y S e e v i t c A 28 USB connection to PC Synchronization of Data
If you see the Microsoft ActiveSync window in the desktop PC, you can find an option icon. If you click this option icon, taps such as Sync Options, Sync Mode, Rules will appear. Sync Options is a menu that you can select an item to synchronize. Contact Calendar E mail Tasks Memo Favorite Files Media etc Contact, Calendar, E-mail, Tasks, Memo, Favorite, Files, Media, etc. Sync Mode enables you to choose synchronization methods. According to the selected synchronization mode, there are 3 following methods:
Continuously while the device is connected: In this mode, if you want to carry out synchronization, connect the device to the desktop computer ActiveSync will immediately start synchronization and synchronize according to the users input of changes in desktop computer. ActiveSync will immediately start synchronization and synchronize according to the user s input of changes in a computer or the device. Only upon connection: If you want to carry out the synchronization after the first synchronization on a manual basis, click Sync. Manually: In this mode, ActiveSync will not run automatically. In order to carry out synchronization, click Sync.
Synchronization is the process of updating M3 and desktop PC after comparing their data Any files including Synchronization is the process of updating M3 and desktop PC after comparing their data. Any files including personal organizer management data, etc in M3 can synchronize with those in the desktop PC. When Troubleshooting the ActiveSync, Check the solutions below.
Ensure the correct USB cable is used in the cradle with USB port of the PC Ensure the correct USB cable is used in the cradle with USB port of the PC. Ensure the power input cable of MM3 or LCD. Please re-try the Synchronization after Soft-reset or Hard-reset. Finish the running program and save the data for sure before resetting. c n y S e e v i t c A 29 4 How to use Internet 4. How to use Internet Via Wireless HSDPA Via Wireless WLAN Browsing the Web Site