FCC ID: 2AV39XVV-6120S-B1 Outdoor camera

Please read this guide carefully before using the product, and please keep it properly. Product Description SD Card slot The product works with Mijia, and can be controlled through Mijia app. Plug the power cable into the power jack of the camera and the camera will automatically turn on. About works with Mijia Power On Scan the QR code to download and install the Mijia APP. Users who have installed the Mijia APP will directly enter the device connection page. You can also search for "Mijia" in the app store, and download from there. Open the homepage on Mijia, click "+" in the upper right corner of the page, and add devices according to the app prompt. Light sensor Indicator Light Antenna Power Access Reset Button Speaker Model No.: XVV-6120S-B1 xiaovv outdoor camera Quick Start Guide Lens Microph one Adding Devices (Android) 1. Open the homepage of Mijia app and click "+" in the upper right corner of the page to add a device; select "xiaovv outdoor camera."

Note: Due to the upgrade and update of the Mijia app, the actual operation may be slightly different from the above description; please follow the instructions in the app. Please note that works with Mijia is only for software verification, and Xiaomi and Mijia are not responsible for the production, standard implementation, quality supervision and other aspects of the product and enterprise.

* The power indicator light is on, and the device prompts "Access-Point ready" to indicate successful booting; if the device prompt is not "Access-Point ready" long press the reset button to restart. 2 Select the router WiFi you need and fill in the WiFi password; place the phone as close as possible to the device and wait for the software to be automatically configured. Adding Devices (iOS) 1. Open the homepage of Mijia app and click "+" in the upper right corner of the page to add a device; select

"xiaovv outdoor camera."

2. Select the WiFi router that you need to connect to and fill in the WiFi password. Then, go to the next step to connect and follow the prompts "Go to Wi-Fi settings" to enter the system settings to connect to WiFi. 3. After choosing to connect the mobile phone to the device WiFi, "xiaovv-camera-

Live View xvb4_xxx," return to the Mijia APP, and go to the automatic configuration. Put the mobile phone as close as possible to the device, and wait for the software to be automatically configured. call. After successfully adding the device, you can find it on the homepage list and select it to watch a live video stream. Through the control screen of the camera, you can perform operations such as screen capture and remote Video and graphic tutorials and more activities Please follow the xiaovv smart camera WeChat official account to learn more Return/Exchange Registration Form For non-human damage, you can enjoy 7 days of unreasonable return, 15 days of replacement, and one year of free repair service. If you need to return or exchange, please use WeChat to scan the QR code below to fill in the return and exchange registration form as required. xiaovv outdoor camera Warrenty Description xiaovv outdoor camera after-sales service is strictly in accordance with Law of the PRC on the Protection of the Rights and Interests of Consumers, Law of the PRC on Product Quality implements after-sales three guarantees serviceincluding:

Within the validity period of the three guarantees, you can enjoy the services of return, exchange and repair for free according to these regulations. Repair, exchange and return should be handled with the invoice. 1. seven days of no reason to return (e-commerce purchase channel), user is responsible for the shipping cost 2. If this product has a performance failure listed in the "Product Performance Failure Table," after testing and determination, you can enjoy the following services for free. Open WeChat to scan the above QR code to follow Precautions:

1. Return and exchange process: fill in the registration form and send it back to xiaovv by courier; refund/exchange will be made after the manufacturer receives the product. 2. User is responsible for the shipping cost of sending back the original product to the manufacturer, and manufacturer is responsible for the shipping cost of sending the exchanged product to user. 3. If you have issued a paper invoice, please be sure to send it back with xiaovv product. 4. If you need maintenance or have other questions, please call 020-38259728 for consultation. Manufacturer Company: Guangzhou Macro-Video Technologies Co., Ltd. Address: 9th floor,building No.22, TIANAN-TEP,Panyu Road North No. 555, Panyu District,Guangzhou, Guangdong, ChinaService Line: 400-102-0159 Address: www.macro-video.com FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.

Model: XVV-6120S-B1 EXHIBIT 1 - PRODUCT LABELING Proposed FCC ID Label Format Model: XVV-6120S-B1 XIAOVV FCC ID: 2AV39XVV-6120S-B1 Specifications: Text is black in color and justified. Labels are printed in indelible ink on permanent adhesive silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Proposed Label Location on EUT FCC ID Label Location Report No.: WTX20X02005532W FCC Part 15.247

Macro-video Technologies Co.,Ltd. 9th floor,building No.22, TIANAN-TEP,Panyu Road North No. 555, Panyu District,Guangzhou, Guangdong, China DATE: 2020-04-13 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2AV39XVV-61208-

Bl Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type File Name Schematics 2AV39XVV-6120S-B1_FCC ID_ Schematics Block Diagram JAVIOXVV-6120S-B1_FCCID_BlockDiagram Operational Description 2AV39XVV-61208-B 1_FCCID_OperationalDescription The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Macro-video Technologies Co.,Ltd.

Waltek Testing Group (Shenzhen) Co., Ltd.9th floor,building No.22, TIANAN-TEP,Panyu Road North No. 555, Panyu District,Guangzhou, Guangdong, China

(FCC ID2AV39XVV-6120S-B1) POWER OF ATTORNEY DATE: 2020-04-15 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern:

We, the undersigned, hereby authorize Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, Macro-video Technologies Co.,Ltd. are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Macro-video Technologies Co.,Ltd.

(Wenhao Hu)

(General Manager)

Macro-video Technologies Co.,Ltd. Suppliers Declaration Of Conformity for the FCC SDoC Procedure The following Equipment adapt FCC SDoC Procedure according to FCC part 2.906 :

Product Name: Outdoor camera Brand Nam: XIAOVV Model Number: XVV-6120S-B1 Report Number: WTX20X02005532W-1 Its herewith confirmed to comply with the requirements of FCC Part 15 Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. It is understood that each unit marketed is identical to the device as tested, and any changes to he device that could adversely affect the emission characteristics will require retest. The following importer / responsible party in United States:

Not Available at Certification Stage Company Name: Macro-video Technologies Co.,Ltd. Company Address: 9th floor,building No.22, TIANAN-TEP,Panyu Road North No. 555, Panyu District,Guangzhou, Guangdong, China Telephone: +86-13903057690 Person is responsible for marking this declaration:

Wenhao Hu General Manager Name (Full name ) Position / Title 2020-05-07 Legal Signature i . y Date