all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
User Manual | Users Manual | 891.59 KiB | / December 12 2018 | |||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | External Photos | |||||||
1 2 | Internal Photos | / December 12 2018 | ||||||
1 2 | ID Label/Location Info | |||||||
1 2 | Test Report | |||||||
1 2 | Test Setup Photos | / December 12 2018 | ||||||
1 2 | Cover Letter(s) | |||||||
1 2 | External Photos |
1 2 | User Manual | Users Manual | 891.59 KiB | / December 12 2018 |
User Manual Document No 1219 Issue 3.04 - 10/2010 Doc: 4241 Issue 1.01 17/05/2018 CONTENTS ID Card Printer User Manual Safety Instructions: ................................................................................................................................................. - 3 -
FCC Declaration: ..................................................................................................................................................... - 3 -
CCC Declaration: ..................................................................................................................................................... - 4 -
Printer installation ................................................................................................................................................... - 5 -
Unpacking.............................................................................................................................................................. - 5 -
IMPORTANT do not connect USB yet ................................................................................................................ - 6 -
Printer location requirements: ................................................................................................................................ - 6 -
Hopper & Stacker .................................................................................................................................................. - 7 -
Prepare the cleaning roller..................................................................................................................................... - 7 -
Install the dye film .................................................................................................................................................. - 8 -
Connect the power supply ..................................................................................................................................... - 8 -
Load the Driver CD in to your PC .......................................................................................................................... - 9 -
Using your ID Card printer ................................................................................................................................... - 14 -
Printer parts ......................................................................................................................................................... - 14 -
Front display panel .............................................................................................................................................. - 15 -
Off button ............................................................................................................................................................. - 15 -
Menu options ....................................................................................................................................................... - 16 -
Cleaning the rollers ................................................................................................................................... - 17 -
Test card ................................................................................................................................................... - 17 -
Info ............................................................................................................................................................ - 17 -
Hand feed ................................................................................................................................................. - 18 -
Mag self test ............................................................................................................................................. - 19 -
Reset printer ............................................................................................................................................. - 19 -
Choosing the right dye-film ribbon ..................................................................................................................... - 20 -
Choosing the right cards ...................................................................................................................................... - 21 -
Card material ....................................................................................................................................................... - 21 -
Card size ............................................................................................................................................................. - 21 -
Card thickness ..................................................................................................................................................... - 21 -
To obtain good quality prints the card must be: ................................................................................................... - 21 -
Printable area of the card .................................................................................................................................... - 21 -
Using Magnetic stripe cards ................................................................................................................................ - 22 -
Using self-adhesive cards ................................................................................................................................... - 22 -
THE PRINTER DRIVER SETTINGS ....................................................................................................................... - 23 -
Caring for your printer .......................................................................................................................................... - 24 -
Cleaning supplies ................................................................................................................................................ - 25 -
Cleaning the printer rollers with the Cleaning Card ............................................................................................. - 25 -
Replacing the cleaning roller ............................................................................................................................... - 26 -
Cleaning the printhead using the Cleaning Pen ................................................................................................... - 27 -
Upgrading to double-sided: ................................................................................................................................. - 28 -
Available consumables ........................................................................................................................................ - 29 -
Troubleshooting .................................................................................................................................................... - 30 -
- 2 -
ID Card Printer User Manual The information contained in this document is subject to change without notice. Magicard Limited shall not be liable for errors contained herein or for incidental consequential damages in connection with the furnishing, performance or use of this material. This document contains proprietary information belonging to Magicard Limited and may not be wholly or partially copied, stored in a data retrieval system, or used for any purpose other than that for which it was supplied, without the express written authority of Magicard Limited. All rights are reserved. The HoloKote feature is protected by US PATENT No: 5,990,918 and by EUROPEAN PATENT SPECIFICATION EP 0 817 726 B1. Microsoft and Windows 2000, XP, Vista and Windows 7 and 8 are trademarks of Microsoft Corporation. Copyright 2011 Magicard Limited. SAFETY INSTRUCTIONS:
To prevent electric shock do not remove covers. Do not attempt to service the printer yourself. There are no user serviceable parts inside. In the event of malfunction, refer servicing to your printers supplier. This product is only to be used with the Power Source supplied at point of purchase. Take care not to spill any liquid on the printer. Ensure that the power supply cord is no longer than 2 metres in length and includes a properly grounded connection. When handling the printer avoid touching the thermal printing edge of the thermal print head. Any grease and contamination will shorten its life. Before transporting the printer, remove the dye film & card hoppers and pack the printer in its original packaging. If using this printer in Germany:
To provide adequate short-circuit protection and over-current protection for this printer, the building installation must be protected by a 16 Amp circuit breaker. Bei Anschlu des Druckers an die Stromversorgung mu sichergestellt werden, da die Gebudeinstallation mit einem 16 A-
berstromschalter abgesichert ist. FCC DECLARATION:
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Re-orient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced Radio/TV technician for help. CAUTION:
Unapproved changes or modifications could void the Users authority to operate the equipment and affect any related warranty claim.
- 3 -
CCC DECLARATION:
ID Card Printer User Manual
- 4 -
ID Card Printer User Manual PRINTER INSTALLATION Welcome Thank you for choosing this ID Card Printer. Before setting up your printer using the Driver CDROM, please follow the simple steps in this guide on installing your printer. This guide helps you make your printing experience more enjoyable and secure. Unpacking Please ensure you have all the items listed before you start installation. 1. ID Card Printer 2. Hopper and Stacker 3. USB Cable (2m) 4. Power Adaptor & Leads 5. Driver CD-ROM 6. Cleaning Cards (2 T-cards) 7. Quick Start Guide
- 5 -
ID Card Printer User Manual IMPORTANT Do not connect the USB yet It is important to install the printers Driver CDROM first, before connecting the USB cable between your PC and ID Card Printer. Printer location requirements:
Normal office environment with:
A properly grounded power supply Ambient temperature +10 to 30oC (50 to 86oF) Protection from direct sunlight and chemicals Protection from abrupt temperature changes Relative humidity 20 - 70%
Sufficient space for:
- opening the top cover
-
cable access at the rear
- 6 -
Hopper & Stacker ID Card Printer User Manual HOPPER: Insert the hopper into the aperture at the back of the printer and click into place. Always fan the cards to ensure the cards are not sticking together before inserting into the hopper, and handle the cards carefully to keep the surfaces clean, as finger marks can affect the print quality STACKER: Insert the stacker into the aperture in the front panel and click into place. The stacker can hold up to 75, 20mil to 40mil (0.51mm to 1.02mm) thick cards. The printer can be operated without the stacker. Prepare the cleaning roller Open printer, then:
A. Pull out the unused cleaning roller. B. Peel off white protective layer carefully to reveal tacky surface. C. Place cleaning roller back into printer.
- 7 -
Install the dye film ID Card Printer User Manual Remove the dye film from its packaging. Place the loaded spool into the rear slots and the take-up spool into the front slots. Close the printers Lid. Connect the power supply Select the connector for your region and connect to Power Supply unit. Plug in and connect to printer which will automatically switch on. Display should show the model and Soft button options. IMPORTANT: Please do not connect the USB until the CDROM has been installed.
- 8 -
ID Card Printer User Manual Load the Driver CD in to your PC 1. Load the driver CD ROM into the PC. Note: If the CD does not run automatically, click the start button, then click on run. Type D:\autorun, where D is the drive letter for your CD drive, then press the return key. 2. Now follow the on screen instructions to install the printer Driver (please see below):
- 9 -
ID Card Printer User Manual Choose to install the Driver for USB or Ethernet operation
(follow the on-screen instructions) USB selection is shown
(See Page 11 for Ethernet selection) You are now ready to install the Driver!
- 10 -
ID Card Printer User Manual The Driver installation is complete and the Printer can now be connected to the PC.
- 11 -
ID Card Printer User Manual Choose to install the Driver for Ethernet operation
(Follow the on-screen instructions) Enter the model of the Printer Enter the IP Address of the Printer NOTE: The Rio Pro 360 is designed to retrieve a Dynamic IP Address. Static mode and IP Address configuration can be updated using the ID Printer Support Utility.
- 12 -
ID Card Printer User Manual Installation Complete!
NOTE: You may now need to restart your PC.
- 13 -
ID Card Printer User Manual USING YOUR ID CARD PRINTER Printer parts 1. Lid opening latch 2. Thermal print head 3. Card cleaning roller 4. LCD display screen 5. Soft function buttons 6. Hand feed/cleaning card entry 7. 75 card capacity stacker 8. 100 card capacity hopper 9. USB port 10. DC power input
- 14 -
ID Card Printer User Manual Text Display Front display panel The front display panel has a text display and 4 push buttons. These buttons act as soft buttons i.e. their function varies depending on the text displayed immediately above each button. The menu options for the soft buttons are explained in the following pages Menu select Buttons Off button Switches the printer OFF. To switch the printer back ON again - press any button.
- 15 -
ID Card Printer User Manual Menu options Press the Menu button The first menu option will be displayed. Press the > button (where indicated) to step through each option in the menu The following menu options will be displayed:
1 of 6 Clean rollers 2 of 6 Test card 3 of 6 Info 4 of 6 Hand feed 5 of 6 Mag self test 6 of 6 Reset printer Options 1 to 6 are explained on page 16.
- 16 -
Cleaning the rollers Test card Info Select [OK]. Step through each option using the right-
most arrow button. ID Card Printer User Manual Clean rollers -
IMPORTANT: To prevent the cards slipping on the rollers during printing, we recommend that you clean your printer using a cleaning card each time you replace the dye-film. For detailed instructions on how to clean your printer please turn to pages 21 to 24. Test card -
Having selected this option, you will be asked to confirm that you wish to print a test card. If you select Yes, the printer will feed a card from the hopper and print an internally generated test image on it. Info - this option provides you with information about the printer:-
Use the Back button to return to a previous menu
- 17 -
Hand feed Hand feed -
ID Card Printer User Manual This feature enables you to select whether cards should be fed into the printer from the Card hopper (at the rear of the printer), or by hand (one-at-a-time) from the front of the printer. There are 2 settings:-
OFF - This is the default setting. Cards will be fed automatically from the carrd hopper. ON - At the start of each print the printer will request you to feed a card through the card feed slot in the front of the printer. Note: Cards will not be fed from the card hopper. V Use the arrow keys to toggle the mode between ON and OFF When Hand Feed mode is set to ON the printer will prompt you when it is time to place a card through the card feed slot in the front of the printer. Once the desired mode is selected, press the Save button
- 18 -
ID Card Printer User Manual Mag self test -
Mag self test Mag self test select Yes on this option if you wish to verify the magnetic operation of the printer. You will be asked to confirm that you wish to encode and print a test card. If you select Yes, the printer will feed a card from the hopper, encode the magnetic stripe and print an internally generated test image on it. NOTE: if your printer does NOT have a magnetic encoder fitted, it will be unable to conduct this test, and will instead display the message:- Mag not fitted!
Reset printer Reset printer -
Reset printer will force the printer to re-initialise (the same effect would be seen if the printers DC Power cable were removed and re-fitted).
- 19 -
ID Card Printer User Manual CHOOSING THE RIGHT DYE-FILM RIBBON 1000K & 600KO dye-film where cost is critical, monochrome printing is a fraction of the 250YMCKOK dye-film, for duplex models only, is more economic when printing in colour Note:
ribbon ID Card Cards per Printer type Single-sided cost of colour printing. Ribbon Panel Layout on the front side and black on the rear. Type of images you want to print single-sided and double-sided (duplex) printers. 300YMCKO dye-film is generally the appropriate choice for colour printing with both The table below is a guide to selecting the best dye-film to use for any intended application. Black Red Blue Green Gold Silver White Scratch Colour (1 side only) 300 (printing on 1 side only) 1000 (printing on 1 side only) Colour front &
colour back 600 (printing on 1 side only) 250 (printing on 2 sides) 150 (printing on 2 sides) Black + Overcoat Monochrome:
Single-sided Single-sided Colour front &
& Duplex Black back Duplex Duplex YMCKO YMCKO KO
*
K
**600KO Part Number 2 digit
** = supplier code
**300YMCKO YMCKOK **250YMCKOK
**1000K-n
(n = colour)
**300YMCKO
* Ribbon Panel Layout Key: Y=yellow, M=magenta, C=cyan, K=resin, O=overcoat (No Colour)
- 20 -
ID Card Printer User Manual CHOOSING THE RIGHT CARDS Card material Not all white plastic cards are the same. For best image quality always use high quality video grade PVC cards. Pure PVC card stock or laminated PVC/polyester cards are available. The latter are more durable and better suited to heavy use and heat lamination when required. For access control and smart card applications, your dealer should provide the appropriate type for direct to card printing. For good consistent results, stick to a single variety of good quality cards, such as those available from your ID Card Printers supplier. Card size CR80 (Standard) = 3.375 x 2.125 (86.5 mm wide x 53.98mm high). CR79 = 3.03 x 2.051 (83.90 mm wide x 51.0 mm high). Card thickness Minimum - 0.015 ( 0.38mm). Standard - 0.030 ( 0.76mm). Maximum - 0.063 ( 1.60mm). To obtain good quality prints the card must be:
Glossy white. Free from dirt and grease. Free from surface contamination. Free from pits and bumps in the surface. Free from burrs at the edge of the card. Completely flat. 85.6 mm 3.375 inches 1016 pixels Printable area of the card This ID Card Printer offers high quality edge to edge (full bleed) printing. Dye cut PVC cards typically have an edge roll off (bevel) which can result in a fine white line around the edge of full bleed printed cards. When setting up your card design using your graphics software on your PC, you should use a maximum page size of 1016 pixels (3.45/87.5mm) x 642 pixels (2.13/54mm). 53.96 mm 2.125 inches 642 pixels
- 21 -
ID Card Printer User Manual Using Magnetic stripe cards If you have a printer fitted with the optional magnetic encoding module, you can simultaneously print and encode the magnetic stripe on the rear of a magnetic stripe card. The magnetic encoding module can encode HiCo and LoCo type magnetic stripe cards When loading magnetic stripe cards, make sure the stripe is on the left and underneath when viewing from the front of the printer. Refer to your PC Badge printing application for instructions on how to print and encode a magnetic stripe card. Using self-adhesive cards We recommend only self adhesive cards supplied by Magicard via your ID Card Printer supplier. There are many different types of self-adhesive cards. Thorough investigation and testing has shown that poorer quality or incorrect card types will cause problems in the printer. These problems range from poor image quality; failure to feed from the card hopper; dye-film being cut and cards getting jammed in the roller mechanism.
- 22 -
ID Card Printer User Manual THE PRINTER DRIVER SETTINGS To access the printer driver settings in Windows 2000 and XP:
To access the printer driver settings in Windows Vista/Windows 7 and 8:
1. On the PC, go to Start then Printers and Faxes 1. Right mouse click on the ID Card Printers driver and select the Printing Preferences option. 1. On the PC, go to the Windows logo then Control Panel 2. Select Printers 3. Right mouse click on the ID Card Printers driver and select the Printing Preferences option. Understanding each individual driver setting :
The printer Driver contains a built-in help file (in HTML format) this file gives an excellent, clear explanation of each driver setting. To view the Drivers help file, go to the printer preferences (as described above), and click on the Help button.
- 23 -
ID Card Printer User Manual CARING FOR YOUR PRINTER CLEANING IS IMPORTANT !!!
Printer care is an important factor of your printers good operation and longevity. Maintaining a regular cleaning routine will give you optimum print quality and prevent down time. We recommend that you clean the rollers and print head each time you fit a new roll of dye film. CLEANING IS EASY AND INEXPENSIVE If you have not already done so, order a cleaning kit - see the Cleaning Supplies box on the next page. A clean printer produces better quality cards, as dust and dirt are not present when the card is being printed. A clean printer is much less likely to require factory maintenance, and the print head in your printer will last for many years of normal use. Remember, particles of dirt can damage the printhead. A clean printer produces better quality magnetic encoding. THE CLEANING SYSTEM There are three main parts to your printers cleaning system:
1. Clean the rollers using the Cleaning Cards:
You use a Cleaning Card to remove dirt from the print path. This should be used each time you replace your dye-film (every 250 to 300 prints). If you print only a few cards a day, we recommend that you clean the printer more often. 2. Clean your PVC cards using the Cleaning Roller:
There is a disposable Cleaning Roller fitted inside the printer to remove dust &
debris from the surfaces of the PVC cards. This will prolong the life of the printhead and will help maintain image quality. It should be replaced every time you replace your dye-film. A replacement Cleaning Roller is supplied free with every new roll of dye-film. 3. Clean the printhead using the Cleaning Pen:
There is also a Cleaning Pen, which is used to clean the printhead. We recommend you use this if any lines are seen on printed cards. To clean your printer, follow the three main steps on next page.
- 24 -
ID Card Printer User Manual Cleaning supplies Two cleaning cards and a cleaning roller (sleeve & bar) are bundled with each new ID Card Printer. You can also purchase additional cleaning kits, which include cleaning cards, rollers and pens:-
Cleaning Kit Cleaning Roller Kit
(10 cards, 1 pen)
(5 sleeves, 1 roller bar)
-
-
Part number Part number
-
-
3633-0053 3633-0054 Cleaning the printer rollers with the Cleaning Card To prevent the PVC cards slipping on the rollers during printing, we recommend that you clean your printer using a cleaning card each time you replace the dye-film.
- 25 -
ID Card Printer User Manual Replacing the cleaning roller A new cleaning roller is supplied with every new dye film roll. Open the printer and remove the used dye film, then:-
A. Pull out the used cleaning roller.
(This is the blue roller positioned behind and below the rear dye-film spool). B. Remove the metal bar from the centre of this cleaning roller. C. Slide the metal bar into the new cleaning roller. D. Peel off the white protective layer carefully to reveal tacky surface. E. Place the new cleaning roller into the printer.
- 26 -
ID Card Printer User Manual Cleaning the printhead using the Cleaning Pen We recommend that you clean the print head each time you replace the dye-film. Take the cleaning pen from your Cleaning Kit. Open the printer and carefully rub the Pen several times, along the complete length of the print head. The tip of the Cleaning Pen can itself be cleaned using an old used Cleaning Card. The Pen can then be reused until the Cleaning Kit has expired.
- 27 -
ID Card Printer User Manual UPGRADING TO DOUBLE-SIDED:
For users with a single-sided ID Card Printer, a double-sided upgrade kit can be purchased from your ID Card Printers. With this simple drop-in kit you can change your single-sided printer into a double-sided printer and be printing double-sided (Duplex) cards in seconds!
STEP 1 - Connect Power Unit to Mains supply. STEP 2 - Plug Supply Lead into Printer. STEP 3 - Open the lid and remove any dye film that may have been previously installed
(this can be used again after the upgrade has been completed). STEP 4 - Load the special dye film supplied with the Upgrade Kit. STEP 5 - Close the lid. The display now shows Duo. Start duplex printing!
- 28 -
ID Card Printer User Manual AVAILABLE CONSUMABLES Product Code Dye film Description
**300YMCKO
**250YMCKOK
**600KO
-
**1000K
-
YMCKO 5 panel dye film, 300 images. YMCKOK 6 panel dye film, 250 images. KO 2 panel black resin dye film, 600 images. Monochrome black resin, 1000 images.
(Various monochrome colors available).
(** = 2 digit supplier code) Product Code Cleaning Kit Description 3633-0053 -
Contains 10 cleaning cards and 1 pen. 3633-0054 -
Contains 5 cleaning roller sleeves and 1 roller bar. All standard PVC ISO CR80 sized cards. HoloPatch/Magstripe cards are available. Card thickness: 0.51mm to 1.02mm (20mil to 40mil)
- 29 -
Cards ID Card Printer User Manual TROUBLESHOOTING Table 1 - Printer Error Messages Solution
- Close the lid to continue
- Do not open the lid while the printer is printing or if there is a print job being sent to the printer. 1. Make sure your card hopper has cards in it and is seated correctly. 2. Take the card stock out and fan them and also make sure they are not warped. 3. Make sure your card stock is within the printer's specifications. 4. Clean the printer rollers. 1. Ensure the card is being fed into slot in the front when the printer display asks you to. 2. Ensure card is inserted far enough into the slot for printer's rollers to grab it. 3. Do not pre-stage a card in the printer before printing. 1. Open the lid and remove the card from 2. Make sure the flip mechanism rotates 3. Do not pre-stage a card in the printer the flip mech. freely. before printing. 4. Ensure the card is being fed into slot in the front when the printer display asks you to. 5. Ensure card is inserted far enough into the slot for printer's rollers to grab it. 1. Remove card from flip mechanism and insure the flip mechanism rotates freely. 2. Make sure your card stacker tray is empty. 3. Make sure your card stock is within the printers recommended specifications. Error Message Probable Cause Lid Open, please close to continue. Code = 01:00 to 01:12 The lid is open either during a print job or when there is a print job pending. Out of cards, please refill the hopper and press retry. Code = 02:00 The printer can not feed a card from the input hopper. Hand feed error, please select and try again. Code = 03:00 Flipper Card Jam, please clear printer mechanism. Code = 04:00 to 04:12 The printer is in hand feed mode and has not detected a card inserted in the front for ten seconds. If the printer is in hand feed mode:-
Card is jammed in the flipper mechanism If the printer is feeding from the hopper:-
Card is jammed in the flipper mechanism
- 30 -
ID Card Printer User Manual Table 1 - Printer Error Messages (continued) Solution Probable Cause Error Message 1. Open the lid and remove the card if possible.
(Note - You can use the arrow buttons on the front to try and move the card). If not close the lid and see if the card will eject. 2. Once removed make sure your cards are within the printers recommended specification. 3. Clean the printer rollers 1. Make sure you are using genuine film from the original printer supplier
(cheaper clone supplies can cause this problem). 2. Install a new roll of film. 1. Make sure you are using genuine film from the original printer supplier
(cheaper clone supplies can cause this problem). 2. Check there is dye film installed, if not
- install a roll of film. 3. Check whether the dye film has been completely expended, if so - install a new roll. 4. Make sure your dye film gear is meshing with the film teeth. 5. Make sure you have the correct power supply plugged into the printer. 6. Try installing a new roll of ribbon. 1. Make sure you are using genuine film from the original printer supplier
(cheaper clone supplies can cause this problem). 2. This could be a new film type for the printer so a firmware upgrade might be needed. Download the latest firmware from our website and install it. 3. This could be genuine film, but the incorrect type for your printer - check with your supplier. Card Jam, please clear printer mechanism. Code = 06:00 to 06:27 No film detected please load a new roll of film to continue. Code = 07:00 Out of dye film, please load a new roll of film to continue. Code = 08:00 to 08:18 Unsupported film, please load different film to continue. Code = 09:00 The card has failed to move into the correct position in the printer. The printer detects an invalid RFID film tag While advancing the dye-film to the correct starting position, the printer does not see the film advance. The printer has validated the dye-film but the configuration of colors is unsupported.
- 31 -
ID Card Printer User Manual Table 1 - Printer Error Messages (continued) Solution Probable Cause Error Message Wrong film type. Please load different film to continue or press cancel to clear print job. Code = 10:00 to 10:06 Can arise if sending a color print or overcoat print job to a single color
(monochrome) film. Can't find panel. Please check film and printer mechanism, or press cancel to clear print job. Code = 11:00 to 11:02 The printer cannot find the requested color panel within 8 panels of its starting point 1. Make sure you have the right film type fitted in your printer. 2. Check that your driver settings are correct. 3. Reinstall the printer driver.
(Note - If printing prn's to the printer it can bypass the driver settings and can produce this error). 1. Make sure you are using genuine film from the original printer supplier
(cheaper clone supplies can cause this problem). 2. Make sure your dye film gear is meshing with the film teeth. 3. Make sure you have the correct power supply plugged into the printer 4. Try installing a new roll of ribbon. RFID PCB Missing. Reconnected PCB to continue. Code = 12:00 The printer does not detect the RFID PCB 1. Make sure you have the correct power supply plugged into the printer. 2. Try installing a new roll of ribbon. Print Head Error, switch printer off and reconnect print head. Code = 13:00 The printer detects that the print head cable is not correctly connected. Overheat error, switch printer off and allow printhead to cool. Code = 14:00 to 14:01 The print head temperature is out of range or is too hot. Image too dark, Please cancel print job and reduce driver printhead power settings to try again. Code = 15:00 Your printer driver settings for Print Head Power are set to high. Can't Lift Head, Check Printer Mechanism. Code = 16:00 to 16:08 The printer is attempting to move internal mechanical parts, but does not detect any movement
- 32 -
1. Turn off the power, then make sure the printhead cable is connected. 2. Check to make sure the correct power supply is connected. 1. Turn off the printer so to allow the printhead to cool down. 2. Check to make sure your room temperature is with in the recommended specifications. 3. Make sure your printer has proper air flow around it. 4. Your printer driver settings for Print Head Power might be set to high. Reset them to 50. 1. Reduce the Print Head Power settings in the driver to 50. 2. Make sure the correct power supply is connected. 1. Check the inside of the printer for obstructions. 2. Check to make sure the correct power supply is connected. ID Card Printer User Manual Table 1 - Printer Error Messages (continued) Solution Probable Cause Error Message Can't Drop Head, Check Printer Mechanism. Code = 17:00 to 17:01 The printer is attempting to move internal mechanical parts, but does not detect any movement 1. Check the inside of the printer for obstructions. 2. Check to make sure the correct power supply is connected Mag Verify Fail, Press Retry or Cancel to continue. Code = 19:00 to 19:02 Clean Required, Please clean rollers to avoid deterioration. Code = 21:00 to 20:01 Wrong PSU?
Please switch printer OFF and check the power supply. Code = 23:00 The printer does not detect the RFID PCB 1. Make sure you have the correct power supply plugged into the printer. 2. Try installing a new roll of ribbon. The printer has printed more than 700 cards since the rollers were last cleaned. It needs to be cleaned to prevent deterioration of print performance. 1. Clean the print rollers. The printer detects a low level of output from the Power Supply Unit. 1. Make sure the correct power supply is connected. Table 2 - Dye Film Problems Problem Probable Cause Solution Dye film cutting during the print operation 1. Ribbon sticking to card 2. Image printing over the ends of the card. 1. Ensure cards are not already used. Then lower the printhead power settings. 2. Adjust either the image start if cutting at beginning of film panel, or the image end if cutting at rear of film panel. 1. Fit a new roll of film. 2. Remove loose film. Image is printed outside the colour panels. (Puts a coloured band across one end of card). Areas of Dye film peeling off card. Dark mosaic like image. Cards printed incorrectly after switching between YMCK and black film 1. A used roll of dye-film has been fitted. 2. Take up spool wound too loosely. 1. Card has been used and has 1. Use only brand new cards not ones overcoat layer on it. 1. Failure to re-set driver settings 2. A used roll of dye-film has been fitted. which failed to print fully. 1. Set correct the driver settings for Colour Format. 2. Replace dye film with a new roll.
- 33 -
ID Card Printer User Manual Table 3 - Printer Prints but with Image Quality Problems Problem Solution Mis-registration of Colours
(Ghosting on Photographs etc) Small Areas of Wrong Colour
(Small areas where 1 or more colour layers have been missed from the image). Dark or lighter vertical lines on card (always in the same place) Vertical white line down one or both ends of card. White line along length of all cards (always in the same place). Probable Cause 1. Card is slipping due to dirty rollers. 1. Dust and debris on surface of the card. (white ovals) 2. Contaminated with oily deposits
(darker blotches) 3. Card surface uneven (White patches) 4. Slight cutting of dye film due to Printhead density set too high
(Jagged scratches) 1. Card striking something during the print process. 2. Card not running smoothly along the platen runway. 1. 2. 3. Incorrect driver setting. Image page size incorrect. Incorrect image start or end position settings. 1. Printhead has damaged heating elements 1. Clean all rollers.(See page 20 of this document). 1. Ensure cards are kept clean, and protected from dust & debris. 2. Replace cards with clean ones and do not handle print surface. 3. Replace cards. 4. In the driver, reduce printhead power setting, or determine which end of card is cutting the film & adjust image start or end position accordingly in the driver. 1. Check print path is clear 2. Contact your suppliers Technical Support department for advice on clearing the platen. 1. Ensure the driver is not set to white border. 2. Ensure page size 86.9mm x 54mm with margins at 0 in badging application. 3. Adjust settings in driver. 1. Contact your suppliers Technical Support department for advice on printhead cleaning or replacement. Table 4 - Magnetic Encoding Problems Problem Magnetic Encoding results are inconsistent Cards do not encode 3. Probable Cause Solution 1. Card slipping when moving over the recording head. Incorrect cards fitted HI-Co / Lo-Co 2. 1. Clean all rollers are clean. (See page 20 of this document). 2. Ensure the correct cards (Hi-Co or Lo-Co) are being used. 1. Card incorrectly oriented when fed 1. Position card with the stripe into printer. 2. Driver selections are incorrect for encoding. Incorrect or defective cards. underneath and to the left when inserting into printer. 2. Check the Printer driver settings are correct. 3. Ensure the correct cards (Hi-Co or Lo-
Co) are being used.
- 34 -
Problem Slow Information download from computer to printer No information download between PC and Printer but printer can print internal test cards Prints stuck in spooler Print spooler will not automatically un-pause after each print. ID Card Printer User Manual Table 5 Driver Related Problems Solution 1. Operate from a dedicated PC 2. Update with latest driver. 1. Select the correct printer driver in the Windows Printers & faxes panel. 2. Check port selection in driver properties. 3. Update with latest printer driver. 1. Un-pause the print spooler. 2. Clear the spooler and reset the printer. 3. Delete the damaged print if necessary, and reset the printer. 1. Shut down and then re-start the PC. 2. Un-install the printer driver and then re-install. Probable Cause 1. Computer polling access control system in background 2. Corrupted Driver or spooler 1. Incorrect printer driver selected in the Windows Printers & faxes panel. Incorrect port selected. 2. 3. Driver corrupted 1. Print spooler paused. 2. Printer communication blocked. 3. Damaged file is at front of print queue. 1. Driver name has been changed, and the PC has not yet been re-
started. 2. Corrupted printer driver file.
- 35 -
ID Card Printer User Manual
- 36 -
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2018-06-15 | JBP - Part 15 Class B Computing Device Peripheral | Original Equipment | |
2 | 13.56 ~ 13.56 | DXX - Part 15 Low Power Communication Device Transmitter |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2018-06-15
|
||||
1 2 | Applicant's complete, legal business name |
Magicard Ltd
|
||||
1 2 | FCC Registration Number (FRN) |
0018780403
|
||||
1 2 | Physical Address |
Waverley House, Hampshire Road
|
||||
1 2 |
Weymouth, N/A DT4 9XD
|
|||||
1 2 |
United Kingdom
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
c******@ul.com
|
||||
1 2 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
XDW
|
||||
1 2 | Equipment Product Code |
3652-3001
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
A****** C******
|
||||
1 2 | Title |
Technical Director
|
||||
1 2 | Telephone Number |
00441********
|
||||
1 2 | Fax Number |
00441********
|
||||
1 2 |
a******@magicard.com
|
|||||
app s | Technical Contact | |||||
1 2 | Firm Name |
Magicard Ltd
|
||||
1 2 | Name |
T**** L******
|
||||
1 2 | Physical Address |
Waverley House
|
||||
1 2 |
Weymouth, DT4 9XD
|
|||||
1 2 |
Wemouth, DT4 9XD
|
|||||
1 2 |
United Kingdom
|
|||||
1 2 | Telephone Number |
44 13********
|
||||
1 2 |
t******@magicard.com
|
|||||
1 2 |
t******@magicard.com
|
|||||
app s | Non Technical Contact | |||||
1 2 | Firm Name |
Magicard Ltd
|
||||
1 2 | Name |
A******** C******
|
||||
1 2 | Physical Address |
Waverley House
|
||||
1 2 |
Weymouth, DT4 9XD
|
|||||
1 2 |
United Kingdom
|
|||||
1 2 | Telephone Number |
44 13********
|
||||
1 2 |
a******@magicard.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 12/12/2018 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | JBP - Part 15 Class B Computing Device Peripheral | ||||
1 2 | DXX - Part 15 Low Power Communication Device Transmitter | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Card Printer | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
UL VS Ltd
|
||||
1 2 |
Eurofins York Ltd
|
|||||
1 2 | Name |
D**** C********
|
||||
1 2 |
N****** W******
|
|||||
1 2 | Telephone Number |
00-44********
|
||||
1 2 |
+44 3********
|
|||||
1 2 | Fax Number |
00-44********
|
||||
1 2 |
d******@ul.com
|
|||||
1 2 |
n******@eurofins.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15B | CC | ||||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 13.56000000 | 13.56000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC