Users manual(G125) BLUETOOTH LIGHT UP SPEAKER Thanks for your purchase of our Bluetooth Speaker!
Like all our products, great care has been taken in its design. A combination of advanced engineering and state-of- the-art materials will provide you with years of listening pleasure. Insert DC plug of the charging cable into the DC 5V power jack on the unit. Insert USB connector into USB port on supplying power (Laptop, Computer, AC Charger, Car Charger, etc.). Charging the Battery Before using, fully charge the battery by using the supplied USB charging cable. The LED indicator turns red when the battery is being charged. When the battery is fully charged, the red LED indicator will be go out. Power on/off Long press the Power button to turn on/off the unit. Bluetooth Pairing When the devices turn on and there are no external devices such as a TF Card, an AUX Cable or USB; The Bluetooth Speaker enter into Bluetooth Mode and have prompt tone The devices is ready to paring. Open the Bluetooth settings on your phone, tablet or other Bluetooth enabled audio device, make sure Bluetooth is on and search for VTA-82457. Once found, click on it. You may be required to enter a password. If so, please enter 0000. Once paired, will have prompt tone the devices is connected successfully. Playing Music Select a song, artist, genre, or playlist on your phone, tablet or other Bluetooth enabled audio device. Short press the play/pause button to start or pause the music. Short press the Pre/V-or Next/V+ button to go to last /next song. Long press the Pre/V-or Next/V+ button to adjust volume. Hands-free For Calling Pick up or hang up a call by short pressing the Phone button. Press and hold the Phone Button to reject when a new call comes in. Press the Phone Button twice to redial the last phone call. AUX./USB Flash/TF playing Play music directly when insert in TF card and USB flash. Long press the Mode button to switch between Bluetooth/Radio/AUX/TF card/USB Drive FM Mode Short press Mode button to enter Radio Mode. Plug in the Micro USB Cable to use the speaker 's radio. The USB Cable functions as an antenna. Short press Play/Pause button, the radio will search channels automatically. Channels will be stored after auto search ends. RGB Light Short pressLED Light settingbutton to choose your favorite light mode(10kinds) LED Indicator Red LED light on Red LED light off while charging Status of the speaker Battery is charging Battery is full V5.0 Appro.10m Built in rechargeable Li-battery 1200mah 1x5W 6hours 470g 80x95x180mm Specifications Bluetooth protocol Online distance of Bluetooth Power sources Speaker Playing time Weight Product size Package Contents:
USB cable Audio cable This Owners manual FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.