Ver 1.0 User Manual Model M1000 1 of 5 Ver 1.0 Instructions Model M1000 Quick Start Prior to initial use, please make sure the MagnaphonesTM are fully charged. 1. Turn OFF the Magnaphones. 2. Access the Bluetooth manager on your device. 3. SCAN for new devices and look for MAGNAPHONE. 4. Hold down the POWER button on the Magnaphones for about 6 seconds until it is flashing RED and BLUE. 5. Select MAGNAPHONE on your device. 6. The Magnaphones will be flashing BLUE only when successfully paired. The Magnaphones will now automatically connect to your device when powered on and within range. You may pair your Magnaphones with multiple devices. It will automatically connect to the first one it discovers. General Information Range: About 30 feet from the connected device. Battery Life : 4 to 6 hours, depending on use and environment. Charge Time: About 1 hour and 30 minutes. Magnaphones utilize a Micro USB port for charging. (Cable included) Cushions for ear pieces are removable. (Second set included) 2 of 5 Controls Ver 1.0 Function ON OFF PLAY / PAUSE VOLUME UP VOLUME DOWN NEXT SONG LAST SONG ANSWER CALL END CALL REDIAL PAIR Directions Hold Power Button for 2-3 Seconds Hold Power Button for 2-3 Seconds Tap Power Button Hold Volume + Button Hold Volume Button Tap Volume + Button Tap Volume - Button Tap Power Button Tap Power Button Double Tap Power Button With Power Off, hold Power Button for about 6 seconds. Power Button will flash Blue and Red while pairing. When pairing is complete, Power Button will flash Blue only. 3 of 5 Wear and Operation Ver 1.0 For optimal experience, it is recommended to charge after every use. Power Button will pulse blue during normal operation. The Magnaphones coil into position to provide a convenient form for storage and to provide a snug fit while wearing. Magnaphones are weather proof (function in the rain) but not water proof
(do not function while swimming). To Wear:
1. Hold left earpiece in left hand and right earpiece in right hand. The ear piece should point away from you. 2. Extend the wire and eliminate any twist. 3. Place wire gently along the back of your head and insert the earpieces into your ear. 4. The wire should softly rest above and behind your ear, providing a comfortable and wireless listening experience. 4 of 5 Ver 1.0 FCC Compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the Increase the separation between the equipment and receiver. receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the device. Where shielded interface cables have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC regulations. Contact For more information, please visit Magnaphones.com Or email info@magnaphones.com Magnaphones Inc. Ann Arbor, MI 5 of 5 FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.