RF REMOTE CONTROL Model Number:
FCC ID:
IC:
Battery:
RX1 2A8S3-RX1 29420-RX1 3V (AAA*2) Instruction of buttons:
1. Turning on/off the appliance Turn the Rocker switch fire. 2. Timer to turn on the appliance. Press to turn on or turn off the electric Press 240min-300min-360min-420min-480 minutes. OFF option for Cancel countdown shutdown setting. button to activate countdown shutdown, selectable from 60min-120min-180min-
3. Down light Press number displayed on the screen, the off option is for turning off the down light. button to select down light color: 3 color options (1-2-3-off), with the corresponding 4. Flame Colors Press number displayed on the screen, the off option is for turning off the ember bed light. button to select Flame color: 7 color options (1-2-3-4-5-6-7), with the corresponding 5. Flame effects Press number displayed on the screen. button to select Flame effect: 4 flame effect options (1-2-3-4), with the corresponding 6. Flame Display Screen Brightness. Press button to select flame display screen brightness: 5 brightness options (1-2-3-4-5), with the corresponding number displayed on the screen. Adjust the appropriate flame display brightness according to the indoor light intensity to achieve the optimal viewing effect. 7. Ember Bed LED Colors button to select ember bed colors:13 color options (1-2-3-4-5-6-7-8-9-10-11-12-13-off), Press with the corresponding number displayed on the screen, the off option is for turning off the ember bed light. 8. Log light brightness Press corresponding number displayed on the screen, the off option is for turning off the log light. button to select log light brightness: 3 brightness options (1-2-3-off), with the 9. Night mode button to Enable Night Mode or Exit Night Mode, when night mode is activated, only the Press ember bed light remains on at low brightness, while all other lights and the flame effect are turned off. The heater can operate normally. If the heater is switched off, this mode will enter an ultra-low power consumption state (5 watt). Additionally, the ceiling light and ember bed light can still be turned on and their colors selected in this mode. Press this button again to exit night mode, and the flame effect will revert to its default settings. 10. Cracking sound Press screen. button to turn on or turn off the cracking sound and the on or off displayed on the 11. Electric heating control Press half power (690 W) and full power (1380 W), the corresponding option displayed on the screen. button to turn on or turn off the electric heater. The fireplace has two heating Settings-
12. Temperature setting Turn on the heater first before using the temperature setting function, then press select the desired temperature: 8 selectable temperature levels (60-64-68-72-76-80-
84-88), the off option is for cancel temperature setting. button to 13. Pairing of the Electric Fireplace and the Remote Control Turn on the appliance, press of the Electric Fireplace and the Remote Control. and hold the 2 buttons indicated for 5 seconds for pairing Tlcommande RF Numro de modle: RX1 Identifiant FCC:
IC:
Batterie:
2A8S3-RX1 29420-RX1 3V (AAA*2) Instruction des boutons:
1. Mise en marche/arrt de lappareil Tournez l'interrupteur bascule pour mettre lappareil en marche. Appuyez sur allumer ou teindre le foyer lectrique. la touche pour 2. Minuterie Appuyez sur 240min-300min-360min-420min-480 min. Loption OFF permet dannuler le rglage de larrt diffr. la touche pour activer l'arrt diffr. Dures au choix: 60min-120min-180min-
3. clairage infrieur la touche pour choisir la couleur de lclairage infrieur: 3 couleurs au choix (1-2-3-
Appuyez sur arrt). Le numro correspondant saffiche lcran; loption arrt permet dteindre lclairage infrieur. 4. Couleurs de flamme la touche pour choisir la couleur de la flamme: 7 couleurs au choix (1-2-3-4-5-6-7). Appuyez sur Le numro correspondant saffiche lcran; loption arrt permet dteindre lclairage du lit de braises. 5. Effets de flamme Appuyez sur numro correspondant saffiche lcran. la touche pour slectionner leffet de flamme: 4 effets au choix (1-2-3-4). Le 6. Luminosit de lcran daffichage de la flamme la touche pour rgler la luminosit de lcran daffichage de la flamme: 5 niveaux Appuyez sur de luminosit (1-2-3-4-5). Le numro correspondant saffiche lcran. Ajustez la luminosit selon lintensit lumineuse intrieure pour obtenir un effet visuel optimal. 7. Couleurs LED du lit de braises la touche pour choisir la couleur du lit de braises: 13 couleurs au choix (1-2-3-4-5-
Appuyez sur 6-7-8-9-10-11-12-13-arrt). Le numro correspondant saffiche lcran; loption arrt permet dteindre lclairage du lit de braises. 8. Luminosit de lclairage des bches la touche pour rgler la luminosit de lclairage des bches : 3 niveaux de Appuyez sur luminosit (1-2-3-arrt). Le numro correspondant saffiche lcran; loption arrt permet dteindre lclairage des bches. 9. Mode nuit la touche pour activer ou quitter le mode nuit. Lorsque le mode nuit est activ, Appuyez sur seul lclairage du lit de braises reste allum faible intensit; tous les autres clairages et effets de flamme sont teints. La fonction de chauffage continue de fonctionner normalement. Si le chauffage est arrt, lappareil passe en mode trs basse consommation (5 watts). Dans ce mode, lclairage plafonnier et lclairage du lit de braises restent activables avec slection de couleur. Appuyez nouveau sur la touche pour quitter le mode nuit; leffet de flamme reprend ses paramtres par dfaut. 10. Son de crpitement Appuyez sur saffiche lcran. la touche pour activer ou dsactiver le son de crpitement; ltat marche/arrt 11. Rglage du chauffage lectrique la touche pour allumer ou teindre le chauffage lectrique. Le foyer dispose de Appuyez sur deux niveaux de chauffage : demi-puissance (690 W) et pleine puissance (1380 W). Loption correspondante saffiche lcran. 12. Rglage de temprature Activez dabord le chauffage pour utiliser la fonction de rglage de temprature, puis appuyez sur la touche pour slectionner la temprature souhaite : 8 niveaux rglables (60-64-68-
72-76-80-84-88). Loption arrt permet dannuler le rglage de temprature. 13. Appairage du foyer lectrique et de la tlcommande Mettez lappareil sous tension, Appuyez sur les touches touches indiques pendant 5 secondes pour raliser lappairage entre le foyer lectrique et la tlcommande.
, puis maintenez les deux et Warning/ Avertissement:
This device complies with Part 15 of the FCC Rules / Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
