Contents Important Safety Instructions. Safety Information. 2 What is Included/TV Placement Setup. 4 Unit and Accessories. TV Stand Installation/Removal. 4 Wall Mounting. Front/Back View. Button Functions. 1 4 4 5 5 Connecting to External Devices. 6 Connecting external devices to your LED TV . 6 Remote Control . 7 Install the Batteries . 8 Basic Operations. 9 9 Menu Operation. First Time Installation. 9 Input Setup. 13 Picture Menu . 13 Sound Menu . 16 Channel Menu. 18 Time Menu . 21 Setup Menu. 23 Advanced Menu. 25 Network Menu . 26 Home Features . 27 Media Player . 27 Troubleshooting . 29 Specifications. 30 Important Safety Instructions
before this product is operated.
for future reference. should be adhered to.
instructions.
plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your
replacement of the obsolete outlet.
convenience receptacles, and at the point where they exit from the apparatus.
by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
long periods of time.
has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
require a grounded connection. WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user's authority to operate this equipment. 1 Safety Information Electrical safety To ensure reliable and safe operation of this equipment, please read carefully all the instructions in this user guide, especially the safety information below. The TV set should only be connected to a main power supply with voltage that matches the label at the rear of the product. To prevent overload, do not share the same power supply socket with too many other electronic components. Do not place any connecting wires where they may be stepped on or tripped over. Do not place heavy items on them, which may damage the leads. Hold the main plug, not the wires, when removing from a socket. During a thunderstorm or when not using the television for long periods, turn off the power switch on the back of the television. Do not allow water or moisture to enter the TV or power adapter. Do not use in wet, moist areas, such as bathrooms, steamy kitchens or near swimming pools. Pull the plug out immediately, and seek professional help if the main plug or cable is damaged, liquid has spilt onto the set, if accidentally exposed to water or moisture, if anything accidentally penetrates the ventilation slots or if the set does not work normally. Do not remove the safety covers. There are no user serviceable parts inside.
warranty. Only qualified personnel should service this apparatus. To avoid battery leakage, remove exhausted batteries from the remote control, or when not using for a long period. Do not break open or throw exhausted batteries in a fire. Physical safety Do not block ventilation slots in the back cover. You may place the TV in a
Do not tap or shake the TV screen, this may damage the internal circuits. Take good care of the remote control. To clean the TV use a soft dry cloth. Do not use solvents or petroleum based fluids. Do not install near any heat sources such as radiators, heat registers, stoves or
plug has two blades and a third grounding prong, the wide blade, or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs. Unplug the apparatus during lightning storms or when unused for long periods. Refer all servicing to a qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled, or objects have fallen into the apparatus, has been exposed to rain or moisture, does not operate normally, or has been dropped.
2 Safety Information FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following
accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCC's RF exposure guidelines, the distance must be at least 20 cm between the radiator and your body, and fully supported by the operating and installation
IC Warning
operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. The device has been evaluated to meet general RF exposure requirement. To maintain
be installed and operated with a minimum distance of 20cm between the radiator and your body. le dispositif de a t valu rpondre gnral rf exposition exigence.pour maintenir la conformit
et exploit une distance minimale de 20 cm entre le radiateur et votre corps. This product has earned the ENERGY STAR for meeting U.S. Federal energy efficiency guidelines as set by the Department of Energy and Environmental protection agency. The ENERGY STAR program exists to provide energy saving guidelines and help promote energy efficient products and practices. changes to certain features settings and functions of this TV can change and/or increase its power consumption. AS-Shipped mode is the mode in which the product qualifies for ENERGY STAR . 3 What is Included/TV Placement Setup Unit and Accessories Base Stand 65" UHD LED SMART TV TV Set Remote Control with Batteries
6 Screws TV Stand Installation /Removal 400mm 200mm Four mounting holes
Screws(3 4*20 BMH
4*20 BMH Wall Mounting
VESA mounting pattern is 400 x 200mm. Remove the screws holding the base to the base bracket and lift the
M6 x 20 isometric
20 mm; damage will occur to the internal components. Caution: Your new TV is heavy; please consult with a professional wall mount installer to perform this installation. Montage mural
The VESA mounting pattern is 400 x 200mm. Remove the screws holding the base to the base bracket and lift the
4 x M6 x 20 filets
20 mm; les dommages se produiront les composants internes.
effectuer cette installation. 4 Front/Back View NOTICE:There is a square glue to protect the IR modelit can be removed after instal the base. Button Functions standby mode. 2.
1. POWER LED: illuminates green when the TV is turned on. illuminates red when the TV is in Receives IR signals from the remote control. DO not put anything near the sensor, as its function may be affected. 3. POWER ON: Press the middle button. CH+: Push forward to choose the next higher channel in the channel list. CH-: Pull back to choose the next lower channel in the channel list. VOL+: Push right to increase the volume. VOL-: Push left to decrease the volume.
MUTE:Press ^ to select press the middle button to enter. POWER OFF:Press to select press the middle button to turn off. MENU:Press - to select press the middle button to enter. INPUT:Press + to select press the middle button to enter.
MENU INPUT MUTE POWER 5 Connecting to External Devices Connecting external devices to your LED TV R AUDIO L VIDEO RJ45 HDMI3 HDMI2 OPTICAL DEBUG RF USB2 5V 0.5A HDMI1
(ARC) USB1 5V 0.5A 1. AUDIO L/R: Stereo audio input 2. VIDEO IN: Video intput 3. RJ45:Network connection port. 4.
5. OPTICAL:Connect a digital sound system to this jack. 6. DEBUG:Used for software debugging 7. 8. USB 6 Remote Control 1. POWER: Turn the TV on and off. 2. : Press th is button to cut off the sound of the TV set temporarily, press again to resume. 3. Digital Buttons(0-9, -): Directly select channel with digital buttons. 4. List: Press it to show channel list and favorite list on screen. 5. SOURCE: This button is used to switch among different sources, Select a source and press
6. HOME: Press it to go to App home page. 7. MENU: Display the main menu or exit the current menu. 8. NAVIGATION KEYS (Up, Down, Left, Right and OK):
To move in the menus and confirm settings. 9. Back: Return. 10. Exit: Exit the menu. 11. NETFLIX: If network connects, press this key to view NETFLIX directly. 12. Prime video: If network connects, press this key to view Prime video directly. 13. Browser: Press this key to open the browser. 14. YouTube: If network connects, press this key to view YouTube directly. 15. C.C.: Press this button to adjust CC mode. 16. VOL+/-:Press these buttons to adjust the volume. 17. CH : Press these buttons to change channel upward or downward. 18. : My apps 19. GUIDE: Show the Electronic Program Guide. 20. : Fast rewind playback. 21. : Play. 22. : Fast forward playback. 24. : Pause. 25. AD: Audio Describtion 23. SUBTITLE:
: Press the appropriate colour to direct access functions in TELETEXT or EPG OSD mode. 7 23. VUDU: Press this button to select VUDU application. 24. pandora: Press this button to select pandora application. 25. CC: Press this button to adjust CC mode. Install the Batteries If the remote control fails to operate the TV functions, replace the batteries in the remote control. 1.Open the battery compartment cover on the back side.
Dont mix old or usedbatteries with new ones. 3.Closed the cover. Initial Setup 1. Connecting your TV on the poweroutlet;
2. Press the POWER button on the remote to turn on the TV in green for the LED light. CAUTION:Always disconnect the TV from the power outlet when the TV will not be used for a long period of time. The POWER button on the front panel is only used for switching the TV into standby, it does not disconnect the device from the main voltage. To completely disconnect the main voltage, please remove the power plug from the socket.
NOTE:
The picture is for reference only. 8 Basic Operations Menu Operation First Time Installation
to start and finish following steps. Select the Environment as you need. Select the OSD language
9 Read to decide whether or not to accept the DATA COLLECTION AND FIRMWARE UPDATES NOTICE. Select the country.
10 Set up the TV time setting. Read to decide whether or not to accept the End User License Agreement. 11 Select whether or not to connect the network. Select the Antenna Type to start auto tuning to search for programs, when finished, the programs
Note:
If you wanna restart the initial setup after the first time, you can select Restore Default
12 Menu system instruction Input Setup Press SOURECE button to display the input source list,
Press EXIT button to quit. Picture Menu Press MENU button to display the main menu.
13 Picture Mode Choose among Standard, Movie, User and Dynamic/Soccer depending on the region. It will be set to User mode automatically when you adjust any of the following six items. Contrast Adjust the difference in color and light between parts of the picture. Brightness Adjust the lightness of the picture. Color Adjust the color richness of the picture. Sharpness Adjust the edge of the picture. Backlight Adjust the backlight value of the TV screen. Color Temperature Select the overall color tone of the picture. Choices are Cool, Nature, Warm and User. 14 Aspect Ratio
Choices are Auto, 4:3, 16:9, Movie, Just Scan or Panorama. Note: The choices of aspect ratio differ by different regions or sources. Noise Reduction:
Eliminate noise in the picture. Choices are Off, Low, Middle and High. MPEG Noise Reduction Eliminate noise generated while creating digital picture signals. Choices are Off, Low, Middle and High. 15 Dynamic Contrast Turn on or turn off the function of dynamic contrast. Film Mode Turn on or turn off the function of film mode. Sound Menu Press MENU button to display the main menu. Press / button to select SOUND in the main menu. On Off Off On Time Sleep Timer Auto Sync Clock --:--
Time Zone 16 Sound Mode Choose among Standard, Music, Movie, Sport/Soccer and User depending on the region.
Balance Control the sound balance between the right and left speaker. Auto Volume Turn on to adjust the sound volume depending on the input signal. Surround Sound Help to create rich and wider sound from stereo sound sources. SPDIF Mode Set the SPDIF sound output mode. 17 Advanced Effect DAP
1. DAP Enable: Turn on or turn off the DAP function. When it is turned on, the following four items can be adjusted. 2. DAP Mode: Select the desired DAP Mode.
4. Dialog Enhancer: Select the effect of dialog enhancer. 5. Auto Volume Control: Select the effect to control the sound volume automatically depending on Dolby audio signal. Channel Menu Press MENU button to display the main menu. Press / button to select CHANNEL in the main menu. 18 Auto Tuning
DTV Manual Tuning
ATV Manual Tuning Manually search for the ATV programs. When a program is found, press RED button to save it. Before ATV manual tuning, there are related items to be adjusted firstly, which differ by different sources as following instructions. 19 Program Edit Edit the programs. You can delete programs, add programs to the favorite list, and so on. Signal Information
detail information about the signal. Only available when there is signal in DTV. 20 Time Menu Press MENU button to display the main menu.
Auto Sync Select the mode of auto sync to be Auto or Manual. Clock
when Auto Sync is set to Manual. 21 Sleep Timer Set to turn off the TV set automatically. Choices are Off,10, 20, 30, 60, 90, 120, 180 and 240 minutes. Time Zone
Summer Time You can turn on or turn off this function. 22 Setup Menu Press MENU button to display the main menu.
OSD Language Select your desired OSD language. Audio Language
corresponding to the signal. 23 Closed Caption
Restore Default Restore Menu options to the factory defaults, and restart the initial setup. Note: User data on this TV will lose completely after operating this feature. HDMI Link Command and control HDMI devices connected to the TV set. 1. HDMI Link - Turn on or off HDMI Link function. 2. Device List - Show the device list of connecting to the TV. 3. Auto Standby - Turn the HDMI device to standby automatically when you turn off the TV set.
TTS
Software Information
Internet Update Check Update the software system by network connection. App Settings Setup for Netflix app, and show the software version. DATA COLLECTION AND FIRMWARE UPDATES NOTICE Read to accept or decline the DATA COLLECTION AND FIRMWARE UPDATES NOTICE E-Manual Select to enter the E-Manual to check the instructions of basic functions. 24 HDMI EDID Switch the version of Extended Display Identification Data. Location Select the TV using environment between Home and Store. Home Mode: Home mode is recommended for home viewing. Store Mode: Store mode is used to display the TV in a store or the like. It will consume more energy in Store mode. Advanced Menu
button to enter the following features. Lock System Select On to enable the following three menu items. Set Password Use to change the current Lock Password. If you change the password and forget it, you can use the super password 8899 to enter the advanced system. The available functions in the Advanced Menu may be different for each model. 25 Network Menu Press MENU button to display the main menu.
Wired Network 1. Connect the network cable to the LAN port at the back of the TV.
3. Select Wired Network, and then select Auto Input, wait a few seconds, the network configuration will be finished successfully. 4. You can also select Manual Input to input the network information (like IP address and so
Wireless Network
interface of inputting password. 4. Use navigation buttons to input the password, when finished, press the green button on the remote control to start the connection. Network Status You can check the detailed information of network connection herein. WOW(Wake on WLAN) Turn on the TV from standby by WLAN connection. 26 Home Features
and access an application. Media Player You can view movie, music and photo files from your USB storage devices. Connect USB storage device to USB input terminal. Press HOME button and select Media to enter media player.
Movie Menu Press MENU to display or exit movie menu while playing the movie.
The movie menu includes the following items:
Play/Pause, Stop, A/B Repeat, Skip Previous, Skip Next, Fast Reverse, Fast Forward, Time Search, Play Mode, Information, and Play List. 27 Music Menu
The music menu includes the following items:
Play/Pause, Stop, Skip Previous, Skip Next, Fast Reverse, Fast Forward, Play Mode, Information and Play List. Photo Menu Press MENU to display or exit photo menu while viewing the photo.
The photo menu includes the following items:
Play/Pause, Stop, Rotate CW, Rotate CCW, Skip Previous, Skip Next, Zoom, Information, Play List and Play Mode. 28 Troubleshooting If the device performance fails, check whether the detected problem is in the following table. If your device still fails, contact customer service. SYMPTOM POSSIBLE CAUSE REMEDY
connected, loose or disconnected. Remote Control Distance is short, no control. Display is faint. Display image does not fill the screen. TV TV TV Unable to operate the TV Signal cable is loose or not connected. Ensure signal cable is not loose or disconnected. Reattach and try again. Receiver of remote control is covered. Ensure the remote receiver is not obstructed. The battery energy of the remote control is too low. Change the batteries. Adjustment is incorrect. Use auto-adjustment function. Display mode is incorrect. Use recommended mode. Adjustment is incorrect. Use auto-adjustment function. Display mode is incorrect. Use recommended mode. Enter PICTURE to adjust the
Press the button to tum off electrical source, then press the button to turn on the TV again after 1-2 minutes. Check the antenna cable connector plug for secure connection and any damage. Antenna cable type is not correct. Check antenna cable type (VHF/
Direction or position of antenna is incorrect. Adjust the direction or position of antenna. Signal is weak. Attempt to use signal amplifier. Exterior influence, for example lighting, static electricity and so on, which might disturb the normal operation of the TV. Static and sound noise. Antenna cable connector is loose, cable is damaged. TV image is better, but has noise . Antenna cable connector is loose, cable is damaged. No image. No sound. Power plug is loose, power cord does not connect well. TV image has stripes. Signal is exposed to interference, such as a car, neon light, electric blower, etc. TV image has shadows. TV signal is reflected by valley or building. Check the antenna cable connector plug for secure connection and any damage. Check to ensure power cord is connected. Press POWER on panel or remote control. Check if the button is on. Do not use an electric blower around unit. Adjust antenna cable direction to reduce interference. Use a high-directional antenna. Direction of antenna is incorrect. Adjust direction of the antenna. Volume setting is too low. Adjust volume to proper level. TV has no sound. Sound is muted. Press MUTE to deactivate mute. CAUTION: Do not allow your TV screen to display the same image for an extended period of time. Please set up a screen protection procedure. If a high-contrast picture remains on the TV screen for a long time, this picture could burn the image onto the screen. Usually the burnt image will disappear
29 Specications Model TV System Resolution Brightness Power Consumption Power Supply Connectivity 65T7U NTSC 3840x2160 350cd/m2 198W AC 100-120V~50/60Hz VIDEO IN RJ45 RF Antenna Input HDMl input x 3 OPTICAL Output Infrared 8 meters 30 (Horizontal) AAA 1.5V x 2 30 Multimedia Playback Format Multimedia Categories Video Music Photo File Extension
.avi/.mp4/.mkv/.mov/.mpg/.dat/.vob/.ts/.v
.mp3/.m4a/.aac/.ac3/.wav
.jpg/.bmp/.png Remote Control Signal Type Control Distance Control Angle Power Supply