FCC ID: 2ACDX-MRR-20 Automotive Radar

Advanced Smart Cruise Control System 1 I. System Information 1. Introduction The ASCC system operates the convenience feature automatically maintaining the distance by measuring the distance and speed of the lead vehicle with the radar in front of the car. Also, if the lead vehicle is stopped along the rear of the lead vehicle stops, and re-start feature provides at the start with Stop & Go function. 2. System Operation operation principle Absence of a lead vehicle Existing of a lead vehicle Stopping a lead vehicle Blinding a lead vehicle Cluster display state Cruise control at the drivers setting speed Driving the lead vehicle traveling speed maintaining a set following distance When auto stop and starting the lead vehicle within 3 seconds, automatically start. Accelerate to the target speed and then cruise control. 1) Normal Mode Control All of the speed/distance control can perform from 30 to 180 km/h speed range. The minimum target speed is 30km/h. If the lead vehicles speed is from 0 to 30km/h, the proper distance can be expected(or calculated/measured). 2) Stop mode Control When the lead vehicle is stopped, and then the vehicle would stop at a certain distance. If the stop duration is within 3 second, the vehicle automatically start, or not manually the resume/set switch turn on or the accelerator pedal is pressed. If the stopping maintain more than 5 minutes, the ASCC control will be released. 3) Overdrive Control Driver's accelerator pedal is pressed, the system will give acceleration priority to the judgment of the driver than the system decision. Then, the driver releasing the accelerator pedal, the target speed gradually slows down. 4) Overtaking Support Control The driver turn on the left blinker, the system internally set as the target distance one-step regardless of the display condition. Therefore, a slight acceleration can help to occur soft overtaking. 2 II. Specific System Structure 1. SCC 1) Function Monitoring front road condition(sensing function) Driver riding/getting off and monitoring car condition(ECU function) Calculating and output of the Required acceleration(ECU function) 2. Switch 1) Function ACSS system On/Off Target speed control Target distance control Operation ON/OFF ASCC-CC switching operation 3. Cluster 1) Function System On/Off System Alarm ASCC Operation State (lead vehicle, Break, Overtake, Stop modes) Display ASCC Driver Setting State (Target Speed/Distance) Display ASCC Auto-unlock/ Usage Condition Un-satisfaction ASCC Hazardous situation (lead vehicle breaking, Stop vehicle alert) Display 3 4. Instruction of the ASCC control using switch 1) ON/OFF Main Switch ON/OFF function In case of the Standby mode, CRUISE Ramp turn ON 2) SET/ Switch At the Stand by mode, Press SET Switch and then Control start. The target speed set 30 km/h when the car speed is from 0 to 30 km/h. When the car speed is over 30 km/h, the target speed is the same as current speed. If the SET switch is pressed under control, the target speed will be decreased. Press short period, the speed decrease 1km/h step. ex) 81807978 Press long period, the speed decrease at first 1km/h step then 10km/h step. ex) 77767060 3) RES/+ Switch At Standby mode, Press RES+ switch and then control start. After the OFF mode changed to Standby mode, the ASCC usage history have to be existed at least once. If the RES+ switch is pressed under control, the target speed will be increased. Press short period, the speed increase 1km/h step. ex) 7778798081 Press long period, the speed increase at first 1km/h step then 10km/h step. ex) 66677080 4) CANCEL Switch Released from the control condition 5) Distance setting switch Set the target headway distance(Initial value is level.4) Press the switch, the target headway distance value changed in the following order. level.4->level.3->level.2->level.1->level.4 In case of the car speed is 90km/h At level 1 (1sec.), Headway distance is 25m. At level 2 (1.3sec.), Headway distance is 32.5m At level 3 (1.6sec.), Headway distance is 40m At level 4 (2.1sec.), Headway distance is 52.5m If press the switch over 2 sec, the ASCC mode is switched the CC mode each other. 4 Notice:

This Device complies with the FCC Rules [and with Industry Canada licence-exempt RSS standard(s)]. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. Le prsentappareilestconformeaux CNR d'IndustrieCanada applicablesaux appareilsradio exempts de licence. L'exploitationestautoriseaux deuxconditions suivantes:

(1) l'appareilne doitpas produirede brouillage, et

(2) This device must accept any interference received, including interference that may cause undesired operation. Notice:

Changes or modifications made to this equipment not expressly approved by (manufacturer name) may void the FCC authorization to operate this equipment. 5 ForFCC ThisdevicecomplieswiththeFCCRules.Operationissubjecttothefollowing twoconditions:(1)thisdevicemaynotcauseharmfulinterference,and(2)thisdevice mustacceptanyinterferencereceived,includinginterferencethatmay cause undesiredoperation. Anychangesormodificationsnotexpresslyapprovedbythepartyresponsible forcompliancecouldvoidtheauthorityto operateequipment. Thisdeviceanditsantennamustnotbecolocatedoroperatinginconjunction withanyotherantennaortransmitter. Endusersandinstallersmustbeprovidedwithantennainstallationinstructions andtransmitteroperatingconditionsforsatisfyingRFexposurecompliance. FCC RF Radiation Exposure Statement:

ThisequipmentcomplieswithFCCradiationexposurelimitssetforthforan uncontrolledenvironment.Thisequipmentshouldbeinstalledandoperatedwith minimumdistance20cmbetweentheradiator&yourbody. For IC This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions: (1)This device may not cause interference;

and (2)This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. IC Radiation Exposure Statement:

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body Equipment RF Specification Product name Kind of product MRR-20 Automotive Radar Operating frequency range 76.125 GHz ~ 76.95 GHz Bandwidth Type(s) of Modulation

(e.g. BPSK, FSK, ASK, ) 825 MHz FMCW Number / Type of Antenna(s) 6(Tx :2 EA, Rx: 4 EA) / patch ANT Antenna Gain Tx1: 20 dBi, Tx2: 14 dBi, Rx: 15 dBi Intended area of use Automobile Test sample information production unit Wired Interfaces Power supply:

Voltages CAN/LIN Cable Length: 2 m Battery Vnom Vmax Vmin

: 12 V

: 16 V

: 9 V Current consumption 400 ~ 600 mA Dimensions (in cm):

83.6 x 75.6 x 21.2 Weight:

162 g 1 Equipment Operating Information

- Minimum Operating Temperature : -40

- Maximum Operating Temperature : +85

"Hereby, MANDO Corp. declares that the radio equipment type Automotive Radar/MRR-20 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the internet address:

https://www.mando.com/ )"

MANDO corp. 21, Pangyo-ro 255beon-gil, Bundang-gu, Gyeonggi-do, Seongnam-si, South Korea FCC Class II Permissive Change Request Letter Date: 06/07/2021 To FCC:

RE: FCC Permissive II Change Request for Company: MANDO corp. FCC ID: 2ACDX-MRR-20 We are submitting an application for a class II permissive change to the FCC approval of the Company name MANDO corp., product description: Automotive Radar The transmitter module itself has not changed. Here are the changes:

Some parts of the board are removed, added, or changed position according to HW Change Description. Please refer to the document for detail description. We hereby declare that changed model is mechanically and technically identical to original model except attach detail change description document. Sincerely, Name: Suhan Kim / Manager Signature

MANDO corp. 21, Pangyo-ro 255beon-gil, Bundang-gu, Gyeonggi-do, Seongnam-si, South Korea Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: 2ACDX-MRR-20 To Whom It May Concern:

Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematics / Part List Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days External Photos / Internal Photos / Test Setup Photos It is our understanding that all measurement test reports, FCC ID label format and correspondence during certification review process cannot be granted as confidential documents and such information will be available for public review once the grant of equipment authorization is issued. Sincerely, Name: Suhan Kim / Manager Signature

MANDO corp. 21, Pangyo-ro 255beon-gil, Bundang-gu, Gyeonggi-do, Seongnam-si, South Korea Date: June. 07, 2021 Federal Communications Commission Equipment Approval Services 7435 Oakland Mills Road Columbia, MD 21046

& Industry Canada Cover letter MANDO corp. FCC ID : 2ACDX-MRR-20 IC: 11988A-MRR20 Part 15C Certification Class II Permissive Change To Gentlemen:

Submitted herewith, on behalf of MANDO corp. is an application for Part 15C Certification [Class II Permissive Change] of the following In Automotive Radar We hereby declare that changed model is mechanically and technically identical to original model except attach detail change description document. Sincerely Yours, Name: Suhan Kim / Manager Signature

MANDO corp. 21, Pangyo-ro 255beon-gil, Bundang-gu, Gyeonggi-do, Seongnam-si, South Korea Date: June. 07, 2021 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046

,Industry Canada c.c. Timco Engineering, Inc. Certification Division 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 USA FCC ID : 2ACDX-MRR-20 IC: 11988A-MRR20 To whom it may concern:

I, the undersigned, hereby authorize Technical Manager Issac Jin of MOVON Test Lab Co., Ltd. and here after referred to as MOVON Test Lab Co., Ltd., to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these m atters. Any and all acts carried out by Technical Manager Issac Jin of MOVON Test Lab Co., Ltd. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing MOVON Test Lab Co., Ltd. as our agent, we still recognize that we are responsible to:

a) b) c) d) comply with the relevant provisions of the certification program;

make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;

make claims regarding certification only in respect of the scope for which certification has been granted;

do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product MANDO corp. 21, Pangyo-ro 255beon-gil, Bundang-gu, Gyeonggi-do, Seongnam-si, South Korea e) f) g) h) i) j) certification which the Certification Division may consider misleading or unauthorized;

upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division;

use certification only to indicate the products are certified as being in conformity with specified standards;

endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner;

ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division;

keep a record of all complaints made known to the us relating to the products compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested;

take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification;

k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Suhan Kim / Manager REMARK:

1. This authorization letter will be sent along with your application when filing with the Certification Division. Please follow the format and type it on company letterhead and send original to us. Authorized signature must be in agreement with grantee code contact in FCC database. 2. 3.

MANDO corp. 21, Pangyo-ro 255beon-gil, Bundang-gu, Gyeonggi-do, Seongnam-si, South Korea Date: Mar. 03, 2020 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046

,Industry Canada c.c. Timco Engineering, Inc. Certification Division 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 USA FCC ID : 2ACDX-MRR-20 IC: 11988A-MRR20 To whom it may concern:

I, the undersigned, hereby authorize Technical Manager Issac Jin of MOVON CORPORATION and here after referred to as MOVON CORPORATION, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these m atters. Any and all acts carried out by Technical Manager Issac Jin of MOVON CORPORATION on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing MOVON CORPORATION as our agent, we still recognize that we are responsible to:

a) b) c) d) comply with the relevant provisions of the certification program;

make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;

make claims regarding certification only in respect of the scope for which certification has been granted;

do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product MANDO corp. 21, Pangyo-ro 255beon-gil, Bundang-gu, Gyeonggi-do, Seongnam-si, South Korea e) f) g) h) i) j) certification which the Certification Division may consider misleading or unauthorized;

upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division;

use certification only to indicate the products are certified as being in conformity with specified standards;

endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner;

ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division;

keep a record of all complaints made known to the us relating to the products compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested;

take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification;

k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Suhan Kim / Manager REMARK:

1. This authorization letter will be sent along with your application when filing with the Certification Division. Please follow the format and type it on company letterhead and send original to us. Authorized signature must be in agreement with grantee code contact in FCC database. 2. 3.

MANDO corp. 21, Pangyo-ro 255beon-gil, Bundang-gu, Gyeonggi-do, Seongnam-si, South Korea 03/03/2020 Federal Communications Commission Equipment Approval Services 7435 Oakland Mills Road Columbia, MD 21046

& Industry Canada Cover letter MANDO corp. FCC ID : 2ACDX-MRR-20 IC: 11988A-MRR20 Part 15C Certification Class II Permissive Change Original Grant Date : 03/02/2018 To Gentlemen:

Submitted herewith, on behalf of MANDO corp. is an application for Part 15C Certification [Class II Permissive Change] of the following In Automotive Radar We hereby declare that changed model is mechanically and technically identical to original model except attach detail change description document. Sincerely Yours, Name: Suhan Kim / Manager Signature MRR-20 Variant A vs B H/W MCU MCU CAN CAN

[Before]

[After]

[Before]

[After]

H/W Version MRR-20 Variant_A MRR-20 Variant_B MCU C-CAN Infineon TC297 BB Step Infineon TC297 BC Step

(CAN-FD support Version) N/A 2.6 k CAN Capacitor 47pF, 100nF 47pF 10pF, 100nF 22nF Change 1

MANDO corp. 21, Pangyo-ro 255beon-gil, Bundang-gu, Gyeonggi-do, Seongnam-si, South Korea Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: 2ACDX-MRR-20 To Whom It May Concern:

Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematics Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days External Photos / Internal Photos / Test Setup Photos It is our understanding that all measurement test reports, FCC ID label format and correspondence during certification review process cannot be granted as confidential documents and such information will be available for public review once the grant of equipment authorization is issued. Sincerely, Name: Suhan Kim / Manager Signature

MANDO corp. 21, Pangyo-ro 255beon-gil, Bundang-gu, Gyeonggi-do, Seongnam-si, South Korea FCC Class II Permissive Change Request Letter Date: 03/03/2020 To FCC:

RE: FCC Permissive II Change Request for Company: MANDOcorp. FCC ID: 2ACDXMRR20 We are submitting an application for a class II permissive change to the FCC approval of the Company name MANDO corp., product description: Automotive Radar (FCC: 2ACDX-MRR-20, Original Grant Date: 03/02/2018). The transmitter module itself has not changed. Here are the changes:

Some parts of the board are removed, added, or changed position according to HW Change Description. Please refer to the document for detail description. We hereby declare that changed model is mechanically and technically identical to original model except attach detail change description document. Sincerely, Name: Suhan Kim / Manager Signature