FCC ID: 2ATUQ-6699 Tablet

Model#: K72LL3 Quick Start Guide WHATS IN THE BOX Device Power adaptor USB Cable CONNECTING DEVICE

To turn on your Device, press and release the power button. To put it in sleep mode, press and release the power button. To turn off your Device, press and hold the power button until a message displays asking if you want to shut down. Your device will be partially charged when you receive it. To charge your Device, connect one end of the USB cable into your and the other end into the power supply (included) or by putting your device on a wireless charger. Connect the power supply into a nearby power outlet. CONNECTING DEVICE TO NETWORK Tap the Quick Settings icon located on the Status bar to display settings for the most commonly performed tasks Select your network form the list of displayed SSID If required, enter the password REGISTERING YOUR DEVICE To use many of the Device features, you must register it to your account. If you have not yet registered, please do so now. Prior to registering, connect to a Wi-Fi network by tapping the Quick Settings icon at the top of the Device, then Wi-Fi. Select the network you want to use. Once you are connected, tap the Quick Settings icon and select the My Account option to register. IMPORTANT PRODUCT INFORMATION For safety, compliance, recycling, and other important information regarding your Device, please refer to the Legal & Compliance section in the Settings menu of your Device.

Product Information User Manual Safety and Compliance Information Using Your Device Around Other Electronic Devices The Device, uses, and can radiate radio frequency (RF) energy and, if not used in accordance with its instructions, may cause interference to radio communications and electronic equipment. External RF signals may affect improperly installed or inadequately shielded electronic operating systems, entertainment systems, and personal medical devices. While most modern electronic equipment is shielded from external RF signals, if in doubt, check with the manufacturer. For personal medical devices (such as pacemakers and hearing aids), consult with your physician or the manufacturer to determine if they are adequately shielded from external RF signals. There are some places where RF signals could constitute a hazard, such as health care facilities, and construction sites. If you are not sure, look around for signs indicating that two-way radios or mobile phones should be turned off. FCC Compliance Information Radio Frequency Information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications that are not expressly approved by the party responsible for compliance could make the device no longer comply with the FCC Rules. Information on your device is on file with the FCC and can be found by inputting your devices FCC ID, which can be found on the back of Device, into the FCC ID Search form available at transition.fcc.gov/oet/ea/fccid. IC Compliance Information Radio Frequency Information This device complies with Industry Canadas license-exempt RSSs. Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement."

The device could automatically discontinue transmission in case of absence of information to transmit, or operational failure. Note that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes where required by the technology. This device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. Les dispositifs fonctionnant dans la bande de 5 150 5 250 MHz sont rservs uniquement pour une utilisation l'intrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. Information Regarding Exposure to Radio Frequency Energy This equipment complies with IC RSS-102 RF exposure limits set forth for an uncontrolled environment. Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. CAN ICES-3(B)/NMB-3(B) Recycling Product Properly In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of or recycle the Products in accordance with your local laws and regulations. For information about recycling the Products, go to www.amazon.com/devicesupport. Product Specifications Model Number: K72LL3 Electrical Rating: 5VDC, 3A Operating temperature: 0C to 35C Connectivity: Dual Band Wi-Fi (2.4/5 GHz); 802.11 a/b/g/n/ac; BT BDR/EDR, BLE

CC FCC Auth 00002108 2020 TR Date: January 6, 2020 To the Certification Body, Mangled Horses LLC hereby authorizes UL Verification Services Inc., located at 47173 Benicia Street, Fremont, CA 94538, U.S.A., to provide and prepare all documentation relating to our product certification, including the signing of application forms for Model Name K72LL3

(Product), FCC ID 2ATUQ-6699 directly to the Certification Body on our behalf. UL Verification Services Inc. is also authorized under this letter to respond on our behalf directly to the Certification Bodys questions about the Product and reports as necessary to assist the Certification Body in the FCC certification. We further certify that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002(b), is subject to a denial to federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 862. This authorization is valid until further written notice from Mangled Horses LLC. Sincerely, Mangled Horses LLC By: Julia A. McCullough Title: President Address: 225 Wilmington-West Chester Pike, Suite 202 Chadds Ford, PA 19317 Telephone: 302-691-6227 Email: mangledhorsesllc@gmail.com

Mangled Horses LLC 225 Wilmington-West Chester Pike, Suite 202 Chadds Ford, PA 19317 January 7, 2020 FCC Authorization and Evaluation Division 7435 Oakland Mills Rd. Columbia, MD 21046-1609 RE: Confidential Treatment for FCC ID 2ATUQ-6699 To whom it may concern:

On behalf of Mangled Horses LLC and its affiliates, I write to request the confidential treatment of the item described below, each of which are attached as exhibits to the equipment authorization application for FCC ID 2ATUQ-6699. This request is made pursuant to 47 C.F.R. 0.457 and 47 C.F.R. 0.459. We request 180 days of confidential treatment (from the date of grant of the equipment authorization for FCC ID 2ATUQ-6699, for the following confidential materials contained in our application:

Short-Term Confidentiality 1. User Manual 2. Quick Start Guide 3. Test setup photos 4. 5. External photos Internal phot These materials contain proprietary information about our device that is not publicly available, and we only share this information with third parties who are committed to maintaining the confidentiality of such information. Disclosure of this information prior to our marketing of our device would be detrimental to our business and impair our ability to successfully launch the device. Long-Term Confidentiality We request indefinite confidential treatment for the following confidential materials contained in our application:

1. Antenna Specifications 2. Schematics 3. UNII Device Software Security Description 4. Block diagram 5. Operation description These materials contain sensitive technical and design information about our device that we would only share on a need-to-know basis, subject to confidentiality agreements, even after we begin marketing and selling the device. If this information is disclosed, our competitors would gain an unfair commercial advantage over us by learning about our product design and development processes. This in turn would significantly harm our ability to compete in a highly competitive market space. Please let me know if you have any questions or concerns. Thank you in advance for your time and support of our request. Yours Truly, 225 Wilmington-West Chester Pike, Suite 202 Julia A. McCullough Mangled Horses LLC Chadds Ford, PA 19317 mangledhorsesllc@gmail.com 302-691-6227