1. 1.1 Features Time USER MANUAL
- Radio Controlled Time (RC-WWVB)
- 12/24 hour time display selectable
- Daily Snooze Alarm function
- Day of week in 3 languages user selectable 1.2 Temperature
- Indoor measurable range: -10C ~+ 50C
- Measures C / F user selectable
- Outdoor measurable range: -20 ~ 50C 1.3 Wireless Outdoor Sensor - 433.92 MHz RF receiving frequency
- Transmission range: 70 meters (open area)
- Low-battery indicator for Outdoor Thermo
- Wall Mount or Table Stand Sensor 2. Unit Appearance Part A:
A1: Radio Controlled Icon A2: Time Display A3: Indoor Temperature A4: Date, Day of Week A5: Outdoor Temperature Part B:
B1: MODE Button B2: SNOOZE Button B3: ALARM Button B4: +/12/24 Button Part C:
C1: Wall Mount Hole C2: Battery Compartment Button B5:- /
B6: RF SEARCH Button B7: RESET Button B8: ALERT Button C3: Stand Outdoor Thermo Sensor(Model Name: CL030027ACL030066A ) D1: Transmission Indication LED D2: Temperature Display D3: Battery Compartment D4: Wall Mount Hole D5: RESET button D6: C/F button D7: Stand D8: Cable probe 4. Getting Started:
4.1 Main Unit:
Open main unit battery compartment cover [C2]
Insert 4 x AA size batteries observing polarity [ + and marks]
Replace main unit battery compartment cover [C2]
4.2 Outdoor Thermo Sensor Battery compartment (D3) of thermo sensor is locating behind the back cover, unscrews the batteries cover to open. Insert 2 x AAA batteries observing polarity [ + and marks]
5. Installation 5.1 Main Unit The main unit can be placed onto any flat surface (C3), or wall mounted by the hanging hole (C1) at the back of the unit. 5.2 Outdoor Thermo sensor The remote sensor should be securely mounted onto a horizontal surface. Note: Transmissions between receiver and transmitter can reach up to 70m in open area. Open Area: there are no interfering obstacles such as buildings, trees, vehicles, high voltage lines, etc. 6. RF Transmission The main unit automatically starts receiving transmission from outdoor thermo sensor for outdoor temperature after batteries inserted. RF icon flashes on the LCD The thermo sensor unit will automatically transmit temperature signal to the main unit after batteries inserted. If main unit failed to receive transmission from outdoor thermo sensor in first 3 minutes after the batteries inserted, - - . display on the LCD. Hold SEARCH button for 3 seconds to receive transmission manually. Press C/F button on thermo sensor unit to select temperature to be displayed in Celsius mode or Fahrenheit mode. Note: Buttons will not function while scanning for thermo sensors signal unless it is well received or stopped manually. 7. Time and Alarm Setting 7.1 Radio Controlled Clock:
After batteries inserted, the clock automatically starts to scan the WWVB time signal. Radio Control Icon flashes on the LCD. flashes, Indicating now is receiving DCF signal turns on, Indicating signal received successfully disappear, Indicating signal reception failed The clock automatically scans the time signal at 2.00 a.m. every day to maintain accurate timing. If reception fail, scanning stops (
on LCD disappear) The clock can be set to scan the time signal manually by holding button for 3 seconds. Each reception takes about 5 minutes. Stop scanning by holding button for 3 seconds. Set RCC function to on in setting mode, then hold + to select the time zone. There are seven time zones for selectable:
Atlantic AT, Eastern E, Central C, Mountain M, Pacific P, Alaskan AK, Hawaii H, shown on the LCD if it is in Daylight Saving Time Mode 7.2 Manual Time Setting:
In time display mode, hold MODE button for 3 seconds to enter Clock/Calendar setting Mode. Press + or - button to adjust the setting and press MODE button to confirm each setting.
(By keeping the + or - button pressed, could accelerate the process and reach the desired value more quickly) The setting sequence is shown as follow: 12/24Hour, RCC on/off, Time Zone, Weekday Language, Hour, Minute, Second, Year, Month, Date, DST ON/OFF, Temperature Unit, Alarm sound duration. For day of week and month, there are 3 languages available for selection: English, French, Spanish Note:
(1) All Setting mode will automatically exit in 15 seconds without any adjustment
(2) Alarm sound duration: there are two options available, 1 minute and 2 minutes.
(3) Second only can be adjusted to 0. 7.3 Daily Alarm Function:
Press MODE button select to view alarm Time, ALARM TIME flashes on the display When viewing the Alarm Time, hold MODE button for 3 seconds to enter alarm time setting. Press + or - button to adjust the alarm time. Press MODE button to confirm the setting. 7.4 Snooze Alarm Function:
Press ALARM button to activate or deactivate the alarm. If the alarm is on, alarm icon "
" appears on the display. Press SNOOZE button when alarm alerts. The alarm snoozes for around 5 flashes on the LCD during the snooze time. This minutes, then it alerts again. process can be repeated for 7 times. Except SNOOZE button, press any buttons to stop snooze alarm. Otherwise, base on the previous setting of alarm sound duration, the alarm alerts for 2 minutes or 1 minute, then stops automatically. 8. Thermometer If the temperature is out of the measurable range, LL.L (beyond the minimum temperature) or HH.H (beyond the maximum temperature) will be shown on the LCD. Press - button to select Temperature in Celsius mode/ Fahrenheit mode. If the temperature is out of the measurable range, LL.L (beyond the minimum temperature) or HH.H (beyond the maximum temperature) will be shown on the LCD. 8.1 Temperature Alert function Press ALERT button to select to activate or deactivate outdoor temperature alert function. press ALERT button select to:
Active outdoor upper temperature alert, the icon besides outdoor temperature digit would display. Active outdoor lower temperature alert, the icon temperature digit would display. besides outdoor Active both outdoor upper& lower temperature alert, the icon besides outdoor temperature digit would display. Deactivate outdoor temperature alert, alert icon disappear. Hold ALERT button for 3 seconds to enter outdoor temperature alert setting. Icon or beside temperatures digits flash. Press + or -button to adjust the setting value, press ALERT to confirm the setting. Setting Sequence as follow: Upper limit of temperature, Lower limit of Temperature. When its alert, the corresponding icon or and temperature digit would flash on the LCD. Press any buttons to stop the alert sound. 8.2 The use of Temperature Probe:
Insert the probe plug to the jack on the right hand side of the thermo sensor unit. Put the cable outside and leave the thermo sensor unit in indoor area to avoid freezing up the battery when the outdoor temperature is below -20 C. Always use the temperature probe to sense the temperature when the temperature is between the following range: -50 C ~ 0C and +50C ~ + 70C 9. Low battery indication:
The low battery icon turns on the display (beside the outdoor temperature), indicating that thermo sensor in low battery status. The batteries should be replaced. 10. Precautions Use a pin to press the reset button if the Unit does not work properly. All Setting Modes will automatically exit in 15 seconds without any adjustment. The clock loses its time information when the battery is removed. Avoid placing the clock near interference sources/metal frames such as computer or TV sets. Do not expose it to direct sunlight, heavy heat, cold, high humidity or wet areas The outdoor sensor must not be set up and installed under water. Set it up in away direct sunlight and Rain Never clean the device using abrasive or corrosive materials or products. Abrasive cleaning agents may scratch plastic parts and corrode electronic circuits 11. Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement.