Instruction Manual Marathon Bluetooth Wall Clock with Temperature and Humidity Sensor CL800003/CL800003WD Bluetooth e:J M KERHER =
Ae @ @ (=) Cizss (2) MARATHON Marathon Watch Company Ltd. TF: 1.800.822.4329 * T: 905.764.9420 F: 905.764.0035 www.MarathonWatch.com This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur ina particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
* Reorient or relocate the receiving antenna.
+ Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Statement This device complies with Part 15 of the FCC rules. Operation Location of Control is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Snooze button . Reset 5 Alarm on/off 6. Battery Compartment Pair 7. Battery door Scroll 8. Stand PONE Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Ose NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a (3) residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and THL wanton le-2S used in accordance with the instructions, may cause harmful i Meee, interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and the receiver.
* Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help. Japan Radio Law Statement This product contains the certified module by Japan Radio Law. The certification number is @* 018-140077
BAC
MARATHON 28 Thank you for purchasing the Marathon Bluetooth Wall Clock. This product is designed to work with iPad, iPhone, iPod, other iOS devices and Android 4.3 or above devices.
* Supports iOS version 7.1 or above
* Supports Android version 4.3 or above
* Up to 5 alarms with snooze function
* Take full control of the Bluetooth Wall Clock with app
* Selectable alarm tone pattern and volume
* Temperature and Humidity reading with history chart that can be read on App without alarm clock connection
* Count down timer
* Monitor the battery status of the Bluetooth Wall Clock and have battery warning if it is at low level
* Can stop alarm via App
* Wall mounting or desk stand
* Operating temperature is 0C to 40C (23F ~ 104F) Before you start using it:
* Please make sure to read the instruction manual carefully. Following and respecting the instructions in your manual will prevent damage to your instrument and avoid causing your warranty to become void. We shall not be liable for any damage occurring as a result of not following these instructions. Likewise, we take no responsibility for any incorrect readings and for any consequences which may result from them Please take particular note of the safety advice!
Please keep this instruction manual for future reference Disposal of Your Old Product Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-
out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. The correct disposal of your old product will help prevent potential negative consequences for the environment and human health. Disposal of Flat Batteries / Accumulators You, as the end user, are legally obliged (Battery Ordinance) to return all flat batteries and rechargeable batteries. Disposal in the household waste is prohibited. European Directive 2006/66/EC Batteries, including rechargeable batteries, which contain hazardous substances are marked by symbols which indicate the prohibition of disposal in the household waste. The designations for the heavy metals concerned are as follows:
Cd = cadmium, Hg = mercury, Pd = lead. You can return flat batteries / rechargeable batteries free of charge to the collection points in your community or anywhere where batteries / rechargeable batteries are sold. You thus fulfill your statutory obligations and help protect the environment. Caution Replace only with the same or equivalent type of battery, please refer to the engraved battery marks inside the battery compartment for the correct battery polarity (+) and (-). Danger of explosion is possible if battery is incorrectly replaced. This product complies with the requirement of the 1999/5/EC directive. Use this unit and mobile phone only in environments with ambient temperatures between 0C and 40C. And the maximum operating temperature of the unit is 40C 27 Care of your Bluetooth Wall Clock Getting Started
* The unit should not be exposed to dripping or splashing of liquid.
* Do not expose unit and/or batteries to liquid, sand or excessive heat.
* No objects filled with liquids, such as vases, shall be placed on the unit.
* Do not cover the unit. Allow adequate space with a small gap between the buzzer holes and surrounding surfaces.
* To clean the set, use a soft dry cloth. Do not use any cleaning agents containing alcohol, ammonia, benzene or abrasives as these may harm the housing. Manufacturer reserves the right to update the contents of this manual and App. 26 1. Install battery 1.1 Open the battery compartment. 1.2 Insert 2 x C size batteries in polarity (+) and (-) as indicated. 1.3 Close the battery compartment. 2. Install Clock System App on your device. 2.1 Access App Store or Google play search for Clock System. 2.2 Select and install Clock System App on your mobile device. Please Note:
User manual is based on iOS version and may differ with Android version which will be specified as supplementary information at bottom of relative page. Pairing the Bluetooth Wall Clock Scroll Function 3. Pair the Bluetooth Wall Clock with Clock System App. Temperature and humidity with clock mode 9 3.1 Before running the Clock System App, make sure your device vA has Bluetooth enabled. e 3.2 After you tap the app icon , the Nearby Devices screen e appears. You need to pair the Bluetooth Wall Clock device rs) before you enter the main app screen. MARATHON aie 3 aa a rg aaa = 7 .
<Setings Bluetooth o Blk toot =) ny .
; = Clock with alarm time mode Dee (show if any alarm enabled) PairNew Devoe Now Decovrte PM e e MARATHON
. wanatuon iOS Version eeeae TIMER mode
= (only if the timer is running) BLE Wall Clock =]
mone 1265 S28 a m s Your dv (aes Sis caret iso vet ev e e Vv
MARATHON
@ ABA MARATHON See Android Version 14.2 In auto-scrolling mode, each mode will stay 3 seconds and then switch to next display. 4 25 Scroll Function Pairing the Bluetooth Wall Clock 14. You can press the [Scroll] button on the Bluetooth Wall Clock to switch between different information manually. Or you can press and hold the [Scroll] button to enable/disable auto-
scrolling display function. 14.1 The scrolling display will be in following order:
Clock with calendar mode MARATHON e H H bd 3.3 Tap Pair New Device to search for nearby devices. 3.4 Press and hold the [PAIR] button on the Bluetooth Wall Clock T @ - device for 5 seconds. You will see that the @ icon will start MARATHON :
- to blink on the clock.
| Magog Brearroeces PM Calendar mode Pair New Device Now BLE Wall hex ee vaerueN enced MARATHON e M [] N AAa@aE , e 1 iOS Version Android Version 3.5 The new Marathon Bluetooth Wall Clock will be displayed on the App and is ready for pairing. Tap the Marathon Bluetooth Wall Clock to start the pairing and connection process. Once the Bluetooth Wall Clock + is paired, it will A start time and data synchronization. 5 Pairing the Bluetooth Wall Clock Offline Temperature and Humidity Reading see ies -
BLE Wall Clock a Android Version 3.6 After the connection is made, the following information will be synchronized:
i) Current time and date ii) Alarms & timer setting iii) Unit battery level iv) Temperature and Humidity history 13.3 When the Marathon Clock and App are offline, user can still read the latest history record from the last connection by tapping the chart icon on the right hand side of specific unit list in Nearby Devices screen. ret = Sain Nearby Devices Paired Devices ee Pair New Device
MARATHON iOS Version
[ica oeves Mary's Alarm none 1 285C 83%
MARATHON Android Version 23 Temperature and Relative Humidity Pairing the Bluetooth Wall Clock 13.2 The unit can accumulate temperature / humidity readings up to 7 days. To read the data tap the conditions then go into the historical chart showing temperature / relative humidity reading by time and date, including the maximum and minimum record of each day. Number of historical records stored in app depends on your device memory. No Bluetooth connection Note:
(Resetting the unit will clear all memory stored in the unit and the record in app after synchronization.) ee aim Ta ae Ties Ta Omen Done Mary's Alarm i Done May's Alam i 7) Yesterday Today Bluetooth establishing connection
"23.7 27.5 25.0 25.0 26.9 iy ty 57% = 49% 63% 48% 48% 53%
My oo iOS Version Bluetooth connected successfully 25.4 247 26.5" 247 207 (27.2 3.7 When the Bluetooth Wall Clock is paired with one device, clock
- - must be reset to pair with other devices. 3.8 One device can pair with a maximum of 5 Bluetooth Wall Clocks at once. 52% 51% 54% 54% 52% 57%
Android Version 22 z Rename the Bluetooth Wall Clock 4. Rename the device. Tap the device name (default is Bluetooth Wall Clock) at the top of the screen to edit the device name. aa * ant _ pee Sain -
BLE Wall Clock a < Done Mary's Alarm y, 6,00 am QWERTYUIOP ASDFGHJKL ZXCVBNM
@ @ % & 23 @ 9 space retour iOS Version
=] EB BLeWar ck a ays lr a 7 ey . wo am $:00 AM =a DT: 00 AM 9:00 AM A 4 9:00 AM 1/2)3)4/)5)6/7/)8\910 9:00 AM QIWIE/RITI YIU} Io RP 9.00 AM als 0|F/)H| 4] K)t The t ZX Ci\ViB.INM @
0:00:00 sym 128 Android Version 13. Current Temperature and Relative Humidity (Conditions) Rae ie ra vone Marys Aleem i Marys Alarm ii 9:00 AM Dia. Pinta Avateabe 9:00 AM 9:00 AM 9:00 AM 0:00:00 25.1'C 54%
iOS Version Android Version
MARATHON 13.1 The unit can measure temperature and relative humidity. The current temperature and humidity reading will be shown on the App or you can browse it on the Bluetooth Wall Clock LCD screen by pressing the Scroll button. 21 Reset the Bluetooth Wall Clock Battery Status Indicator 12. Reset the Bluetooth Wall Clock 5. Battery status indicator:
Indicates the battery level of your Bluetooth Wall Clock device. When the battery level drops below 20%, the battery icon is in red status and a low battery warning will pop up as a reminder to replace the battery. Meanwhile, low battery indicator icon will be shown on the alarm clock LCD. ae zs ha -
< done BLEWalclock =
= ot) 6:00 am Above 60% O om Aen
~ 6:00.am @
If the Bluetooth Wall Clock is not working properly, try to press = S RESET button to resume default setting. The LED flashes twice Between [al 6 Warning in (purple) colour, then the LED will flash once per 6 seconds 20% ~ 60% 2 ee in red colour. al
= Gworam E Once Below 20% [.| lei 8 6:00 am One Sees iOS Version Previously Paired Device TT Dg was prevent oe wisi Pe So paired. Would you lke to Restore Es prevtus setings?
Erase Restore com ox -
Above 60% O
Between omer arning 20% ~ 60% fnonemonad iOS Version Android Version After reset, all data in the Bluetooth Wall Clock is deleted. Press and hold the [PAIR] button again to re-pair the Bluetooth Below 20%
Wall Clock. If it has been paired previously with the same device, you can select Restore to resume all setting and data or select Erase to start all from scratch. E11 20 Android Version 9 Setting the Alarm Time Preference 6. 6.1 Each Marathon Bluetooth Wall Clock can set up to a maximum Setting the alarm time of 5 Alarms. On the main screen, tap individual alarm
(e.g. Alarm 1) to enter the alarm setting page. iOS Version Android Version Osicoxy 238, THU (2-25 6.2 The alarm setting screen appears. You can edit and adjust i) different items on this screen, which include:
Alarm Name: Tap alarm 41-5 to edit your preferred name to this alarm. Time: Tap to adjust the time for this alarm. Day of Week: Tap to select which day of week to enable the alarm.
- If none are selected, the alarm will only sound once.
- If all days are selected, it will sound daily . Sound pattern: Tap to select which tone pattern (5 patterns plus one random pattern available) is applied to this alarm. 10 141.4 11.2 11.3 11.4 11.5 11.6 11.7 Snooze Enabled: Tap to select ON/OFF to enable/disable the Snooze function. If Snooze Enabled is ON, you will have two more options, which are:
Maximum Snoozes:
The maximum number of times to repeat the snooze function, which can be set to Unlimited or values from 1 to 9. Snooze Duration:
The time duration of snooze function, which can be set to values from 1 to 15 minutes. Alarm Sound Duration:
The alarm duration, which can be set to values from 1 to 15 minutes. Auto DST update:
It will adjust Daylight Saving Time (DST) automatically based on your device time zone setting. The alarm clock will be automatically one hour ahead of Standard Time in summer time and will be back to the normal Standard Time when back to winter time, according to your devices time zone. Scroll Display:
Turn on to enable the LCD screen to switch automatically
(screen detail please refer to point 14) Temperature: Select C or F Time Format: Select 12 or 24 hour format Date Format: Select MM / DD or DD/ MM day format. 19 Preference Setting the Alarm Time 11. Preference setting v) Alarm volume level: Tap to select the alarm sound volume level Tap the Fed / & to enter the Preference screen. You can edit (three options: Low, Med and High). and adjust the following items on this screen. 6.3 Complete the alarm setting. i) Tap [Done] / to save the alarm setting and turn on a = cr r= ca aa = the alarm.
< Done Mary's Alarm a Done Mary's Alarm ii) Atthe main screen, user can turn the alarm on / off by scrolling the @ right and left.
<r tcost unite = @ crolling the rig e caine aS <Done Mary's Alarm Nearby Devices Auto-DST Update Scroll Display in ic a
: Alarm Soroll Display Tomporatue [c fy i a Tmeromt =
Time Format DateFormat (vives SEN Pair Now Device DateFormat ve) a R>} "y 6:00 @
sama aeaal : . MARATHON
|G reteronce QPPecterence s 9 Snooze Enabled = Hina oe Suet iOS Version Cebunanees Scroll Display $A100%
Shen iin Tempwatwe = :
fam Sound ion ori =
Date Format mo sen ser py tien rea <= 9:00 AM tome = nwt Updo =
a aria 9:00 AM echo 9:00 AM sute03T Update = tipi 6:00 AM Android Version 9:00 AM 0:00:00 48 Android Version 44 Remote Alarm OFF 6.4 Stop the alarm via App. (iOS version only) i) When the alarm sounds, enter the App and tap the blinking icon located under Paired Devices ii) Tap the icon to stop the alarm. win -
Nearby Devices Mary Alarm az Pair New Device a MARATHON iOS Version 6.5 Stop the alarm during lockscreen. (iOS version only) i) An alarm notification will pop up on the lockscreen. Swipe right on the notification and tap Alarm Cancel to stop alarm or Snooze to enter snooze mode. ii) For Android version, the notification icon appears at the top of status bar. Slide down the status bar to show the notification and tap Alarm Cancel to stop alarm or Snooze to enter snooze mode. 12 Deleting the Bluetooth Wall Clock Record 10. Delete the Marathon Bluetooth Wall Clock record. iOS Version jae ase oo Jui tome SE a 48 | |< oon Known Devices done | |< Done Known Devices. Done
@ Marys Alar Pair New Devics
MARATHON MARATHON MARATHON You can tap the 4$ at Nearby Devices screen to enter the Known Devices page. By tapping Edit and then the , you can select Delete to delete the Bluetooth Wall Clock record on the current device. Android Version ae) C2 weaity devices @ i | 29 knowin Devices Mary's Alarm = marys Aaa ="
none 253C 55% Fat) . veson MARATHON MARATHON You can tap the = at Nearby Devices screen to enter the Known Devices page. By tapping Edit and then the %& , you can select Delete to delete the Bluetooth Wall Clock record on the current device. 17 Setting the Timer 9.2 Using the Timer In the Home screen, you can tap Start under Timer to start counting. sae = ae | ae Ta ra
<Done Mary's Alarm Done Mary's Alarm a Oh Omin 0 sec Ohr Omin 57 sec Snooze Operation 7. Using the SNOOZE function 7.1 When the alarm sounds, press the [SNOOZE] button to get an extra 5 minutes of sleep. The snooze will repeat up to three times. Mary sm i jee il 9:00 AM 8:00 AM 9:00 AM 9:00 AM 9:00 AM 5:00 AM 9:00 AM 9:00 AM 0:00:00 ie 0:59:44 Reset Android Version Then you can tap Stop to stop the current timer and Start to re-continue the timer again. The timer can be reset by tapping the [Reset]. 16 Snooze Enabled Pox |
bacicateooachonches Alarm Sound Duration Auto-DST Update Seroll Display Tima Zone sai =
Time Formet i ste Format Poo |
Scroll Display Temperature 8 @ Auto-DST Update fon |
iOS Version Android Version 7.2 The above default value is set by the factory. User can set the Maximum Snoozes and Snooze Duration in the preference screen. 1s To Turn OFF the Alarm Setting the Timer 8. To disable the alarm 9. Toset the timer:
Tap timer on main screen and go into timer screen. Fas = res ia
<Done Marys Alarm a Onr Qmin 0 sec ae <aE = 2 Done Mary's Alarm fi iOS Version Am ye De FH 0 it |
L a BDrineaciviy 6:0 =m, [9:00AM = Merja fh bi \ Or 0 in 0 A 9:00 AM X 9:00 AM
~ X S00 aM lL J $00 AM 3:00 AM =
Oita 6:00 AM
"0 - 9:00 AM NN 9:00 AM a a 0:00:00 \ 0:00:00
, iOS Version Android Version 8.2 The alarm will sound for 1 minute and stop automatically. If Snooze is enabled setting is ON, the alarm will repeat every 5 minutes. You can press the [Snooze] button to interrupt the : :
alarm momentarily, or can press [Alarm] button to turn off the i) Timer period:
alarm and stop the snooze function completely. ___ Scroll to adjust the timer period. ii) Sound pattern:
Android Version 9.1 You can edit and adjust the following items on this screen:
8.3 User can tap the alarm time to disable the alarm completely Tap to select the tone pattern (5 patterns plus one random
(Please make sure your app is paired with the device) ___ Pattern available). iii) Sound volume level:
414 Tap to select the sound volume level (three options: 415 Low, Med and High).