FCC ID: 2AVZC-A000010007A BT/Wi-Fi Combo Module Gen6

PRODUCT BT(v4.2) &

WLAN(802.11a/b/

g/n/ac) 2.4G SISO/5G MIMO SPECIFICATION MODEL NAME :

6 BT/wifi Combo Module MODEL CODE A000020012A 6th Bt/Wifi Module User Manual ADDRESS RM#2401, A-dong, D-Polis, 606, Seobusaet-gil, Geumcheon-gu, Seoul, 08504 Korea TEL 070-7790-8869 FAX 02-2642-0012 PRODUCT BT(v4.2) &

WLAN(802.11a/b/

g/n/ac) 2.4G SISO/5G MIMO SPECIFICATION MODEL NAME :

6 BT/wifi Combo Module MODEL CODE A000020012A Product Specification This specification is applied to MarkoneTechnology Bluetooth (v4.2)and 2.4GHz SISO/5GHz MIMO WLAN(802.11a/b/g/n/ac) Module A000020012A which includes BCM88359/CYW88359 1. Application 2. Quality Quality should meet each condition which mentioned on this specification. However, the items which are not mentioned on this specification follow the inspection agreements and standards which are agreed with both companies. 3. Appearance and Characteristics 1) Appearance Appearance should not be contaminated by harmful materials and should not have cracks etc. Mechanical dimensions should meet the contents of clause 8. 2) Characteristics Electrical characteristics should meet the contents of clause 10. 4. Application of Bluetooth v4.2 and 2.4GHz/5GHz WLAN(IEEE 802.11.a/b/g/n/ac) 1) Automotive 5. Maximum Rating NO 1 2 3 4 5 ITEM Rating UNIT Operating Temperature Range Storage Temperature Range VBAT Voltage Range VIO Voltage Range VBAT Max. Current

-40 ~ +85

-40 ~ +105

-0.5 ~ 6.0

-0.5 ~ 3.9 700(@3.3V) V V mA Module assures operating normally at -40 ~ +85. PRODUCT BT(v4.2) &

WLAN(802.11a/b/

g/n/ac) 2.4G SISO/5G MIMO SPECIFICATION MODEL NAME :

6 BT/wifi Combo Module MODEL CODE A000020012A Product Specification 8. General Features 8.1 BT(v4.2) + 2.4GHz/5GHz WLAN(IEEE 802.11a/b/g/n/ac) 2.4G SISO/5G MIMO 1) Features Operation Voltage is 3.3V WiFi Single-stream up to 866 Mbps data rate Automotive Module

: All components are AEC-Q 100/200 qualified Support 2 Antenna port

: ANT0 : Bluetooth/5G WLAN, ANT1 : 2.4G/5G WLAN Integrated WLAN PA, RF Switch and LNA RoHS Compliant Size : 35.3 x 35.3 x 7.8 mm3 Support bandwidth : HT20 / HT40 / VHT80 HOST Interface : PCIE/SDIO(WLAN), UART(BT), PCM(I2S) Package type : Connector type(B to B) PRODUCT BT(v4.2) &

WLAN(802.11a/b/

g/n/ac) 2.4G SISO/5G MIMO SPECIFICATION MODEL NAME :

6 BT/wifi Combo Module MODEL CODE A000020012A Product Specification 8. General Features 8.2 Bluetooth(BT v4.2+EDR compliant) 1) Bluetooth Key Features Supports key features of upcoming Bluetooth standards Fully supports Bluetooth Core Specification version 4.2 + (Enhanced Data Rate) EDR features:

-. Adaptive Frequency Hopping (AFH)

-. Quality of Service (QoS)

-. Extended Synchronous Connections (eSCO) Voice Connections

-. Fast Connect (interlaced page and inquiry scans)

-. Secure simple Pairing (SSP)

-. Sniff Sub rating (SSR)

-. Encryption Pause Resume (EPR)

-. Extended Inquiry Response (EIR)

-. Link Supervision Timeout (LST) UART baud rates up to 4 Mbps Supports all Bluetooth 4.2 packet types Supports maximum Bluetooth data rates over HCI UART Multipoint operation with up to seven active slaves

-. Maximum of seven simultaneous active ACL links

-. Maximum of three simultaneous active SCO and eSCO connections with scatternet support Narrowband and wideband packet loss concealment Scatternet operation with up to four active piconets with background scan and support for scatter mode High-speed HCI UART transport support Channel quality driven data rate and packet type selection Standard Bluetooth test modes Extended radio and production test mode features Full support for power savings modes

-. Bluetooth clock request

-. Bluetooth standard sniff

-. Deep-sleep modes and software regulator shutdown PRODUCT BT(v4.2) &

WLAN(802.11a/b/

g/n/ac) 2.4G SISO/5G MIMO SPECIFICATION MODEL NAME :

6 BT/wifi Combo Module MODEL CODE A000020012A Product Specification 8. General Features 8.3 WLAN 1) WLAN RF band & modulation Features Dual-band 2.4GHz and 5GHz 802.11 a/b/g/n/ac(802.11ac compliant) Up to 866Mbps data rate Supports 20, 40 and 80MHz channels with optional SGI(256 QAM modulation) Tx and Rx low-density parity check(LDPC) Supports IEEE 802.11ac/n beamforming Supports PCIe v3.0-compliant interface running at GEN1 speeds Supports two antennas with Bluetooth/5G WLAN and 2.4G/5G WLAN antenna Supports standard SDIO V3.0 (up to SDR104 mode at 208MHz, 4-bit and 1-bit) Backward compatibility with SDIO v2.0 host interface WPA and WPA2(Personal) support for powerful encryption and authentication AES and TKIP in hardware for faster data encryption and IEEE 802.11i compatibility Reference WLAN subsystem provides Wi-Fi protected Setup(WPS) 2) WLAN MAC features Enhanced MAC for supporting IEEE 802.11ac features Transmission and reception of aggregated MPDUs(A-MPDU) for high throughput(HT) Support for power management schemes, including WMM power-save multi-poll(PSMP) and multiphase PSMP operation Support for immediate ACK and block-ACK policies Inter-frame space timing support, including RIFS Back-off counters in hardware for supporting multiple priorities as specified in the WMM specification Timing synchronization function(TSF), network allocation vector(NAV) maintenance, and target beacon transmission time(TBTT) generation in hardware Hardware offload for AES-CCMP, legacy WPA TKIP, legacy WEP ciphers, WAPI, Programmable independent basic service set(IBSS) or infrastructure basic service and support for key management set functionality PRODUCT BT(v4.2) &

WLAN(802.11a/b/

g/n/ac) 2.4G SISO/5G MIMO SPECIFICATION MODEL NAME :

6 BT/wifi Combo Module MODEL CODE A000020012A Product Specification 8. General Features 8.3 WLAN 3) WLAN PHY features Programmable data rates from MCS0-9 in 20MHz, 40MHz, and 80MHz channels, as specified in IEEE 802.11ac Improved performance with channel smoothing and spur canceller support Supports Optional short GI and Green field modes in Tx and Rx Tx and Rx LDPC for improved range and power efficiency Beam forming support Supports IEEE 802.11h/k for worldwide operation Advanced algorithms for low power, enhanced sensitivity, range, and reliability IEEE 802.11a, 11b, 11g, 11n, 11ac single stream PHY standards Designed to meet FCC and other worldwide regulatory requirements 8.4 JEDEC MSL (Moisture Sensitivity Level) Test MSL 3 Level (Floor Life Time : 168Hrs. / Condition : 30, 60% RH) Standard : IPC / JEDEC J-STD-020C Bake 24Hrs. / 125 Soke 40Hrs. / 60, 60% RH Reflow 3 times / 240 PRODUCT BT(v4.2) &

WLAN(802.11a/b/

g/n/ac) 2.4G SISO/5G MIMO SPECIFICATION MODEL NAME :

6 BT/wifi Combo Module MODEL CODE A000020012A Product Specification 9. Electrical Specification 9.4 Operating Conditions 1) Recommended operation conditions Min

-40 3.01) Max

+85 3.6 Unit V Parameters Operating Temperature Range Supply Voltage : VBATT (3.3V) 2) Current consumption Stand-by (BT & WLAN) WLAN Continuous Rx WLAN Continuous Tx2) Bluetooth Connection Parameters Average 10 180 420 20 Unit mA mA mA mA 3) ESD Precautions RBHP-B213B is classified as a JESD22-A114(HBM) class 1C(1kV) product. Apply ESD static handling precautions during manufacturing. 4) External 32.768KHz low-power oscillator(LPO) External 32.768KHz precision oscillator is required. Parameters Nominal input frequency Frequency accuracy Single input amplitude Signal type LPO clock 32.768 200 200 ~ 3300 Square-wave or sine-wave Unit KHz ppm mV, p-p 1) The BCM88359/CYW88359 is functional across this range of voltages. Optimal RF performance specified in the RBHP-B213B approval sheet, however , is guaranteed only for min. 3.2V including VBAT ripple 2) MIMO condition FCC Warning Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications (including the antennas) to this device that are not expressly approved by the manufacturer may void the users authority to operate the equipment. FCC RF Radiation Exposure Statement This equipment complies with FCC RF Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. ISED Warning Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) Lappareil ne doit pas produire de brouillage;

(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. IC RF Radiation Exposure Statement This equipment complies with IC RF Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. RF du IC d'exposition aux radiations Cet quipement est conforme l'exposition de la IC rayonnements RF limites tablies pour un environnement non contrl. Lantenne pour ce transmetteur ne doit pas tre mme endroit avec dautres metteur sauf conformment la IC procdures de produits Multi-metteur. Cet quipement doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur et votre corps. Please notice that if the FCC/IC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following:

Contains FCC ID: 2AVZC-A000010007A Contains IC: 26076-A000010007A any similar wording that expresses the same meaning may be used. Ltiquette dhomologation dun module dInnovation, Sciences et Dveloppement conomique Canada devra tre pose sur le produit hte un endroit bien en vue, en tout temps. En labsence dtiquette, le produit hte doit porter une tiquette sur laquelle figure le numro dhomologation du module dInnovation, Sciences et Dveloppement conomique Canada, prcd du mot contient , ou dune formulation similaire allant dans le mme sens et qui va comme suit :

"Contient IC : IC: 26076-A000010007A" est le numro dhomologation du module Manual Information to the End User The module is limited to OEM installation ONLY. The OEM integrator is responsible for ensuring that the end-user has no manual instruction to remove or install module. The module is limited to installation in mobile application;

A separate approval is required for all other operating configurations, including portable configurations with respect to Part 2.1093 and difference antenna configurations. There is requirement that the grantee provide guidance to the host manufacturer for compliance with Part 15B requirements.

6 BT/WiFi label FCC ID: 2AVZC-A000010007A IC: 26076-A000010007A Technology Reserch Institute 0 / 19

TO:

Federal Communication Commission

Equipment Authorization Branch

7435 Oakland Mills Road

Columbia, MID 21046

To whom it may concern:

Date: July 19, 2021

We, the undersigned, hereby authorize SGS Korea Co., Ltd. to act on our behalf in all manners relating to

application for equipment authorization, including signing of all documents relating to these matters. Any

and all acts carried out by the agent on our behalf shall have the same effect as acts of our own.

We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes

FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a).

Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility

for complying with the terms and conditions for Certification, as specified by SGS North America, Inc.,

still resides with Markone Technology Co., Ltd.

This authorization is valid until further written notice from the applicant.

Lee, Jong-bok/ Chief Research Engineer

Markone Technology Co., Ltd.

TEL: +82

10

9916

2536

E-mail: james@markone

‐

‐

‐

tech.com

‐

SGS North America Inc.

620 Old Peachtree Road

SUITE 100

Suwanee, Georgia 30024

United States

Applicant Declaration

Applicant Legal Business Name

Markone Technology Co., Ltd.

232, Yeongudanji-ro, Ochang-eup, Cheongwon-gu,

Cheongju-si, Chungcheongbuk-do , South Korea

Address

Grantee Code

FCC ID

Contact Email

Contact Phone

Authorized Contact Name

Jong-bok Lee

2AVZC

2AVZC-A000010007A

james@markone-tech.com

82-10-9916-2536

I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

a)

b)

c)

d)

e)

in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my

knowledge and belief.

in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in

this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules,

if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure

that production units of this equipment will continue to comply with the FCC’s technical requirements.

in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible

party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321.

in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts

and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3)

the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing.

the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED.

the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS,

FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or

software required for evaluation, review, certification and audit surveillance of products certified by SGS.

f)

neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section

5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See

47CFR 1.2002(b) for the definition of a “party” for these purposes.

g)

the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions.

Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47

Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm

Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html

Applicant Signature:

Date: July 19, 2021

Print Name:

Jong-bok Lee

Title:

Principle Research Engineer

Applicant Declaration

Rev:0.0

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

SGS North America Inc.

620 Old Peachtree Road

SUITE 100

Suwanee, Georgia 30024

United States

Applicant Declaration

Applicant Declaration

Rev:0.0

FCC USBDL JOH OVN CFS; 633342 Inquiry on 06/20/2021 :

Inquiry:

Dear FCC FCC response on 06/29/2021 Yes, a C2PC is permissible. We have a product with FCC ID: 2AVZC-A000010007A This is a single modular but manufacturer have to change its TCXO into crystal due to supplier issue. Product will be fully tested but it seems PCB patter around the oscillator will be slightly changed. In this case, would it be acceptable to do the C2PC? If you have any concern, please let us know. Detail information including photos, schematics, PCB layout is attached. thank you.

232, Yeongudanji-ro, Ochang-eup, Cheongwon-gu, Cheongju-si, Chungcheongbuk-do , South Korea July 19, 2021 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 July 30, 2020. There are changes to this product below. FCC Class II Permissive Change for FCC ID: 2AVZC-A000010007A This is to request a Class II permissive change for FCC ID: 2AVZC-A000010007A, originally granted on 1. The module name changed to the below specification is A000020012A. 2. C302(10nF) C315(1000pF) on TCXO circuit while changing TCXO(DSB211SDN 37.4MHz) to X- tal(DSX211G 37.4MHz) Add C300,C302(20pF) R300(470ohm) in X-tal version circuit. 3. Antenna signal pad size change width 1.5mm -> 0.7mm change. 4. Addition of bottom surface SMT gasket to strengthen contact between PCB and shield can. 5. C414(0.1uF), C415(2.2uF) VIO stage C412(100pf) added for power stage stability.

*Conclusion: The device is still in compliance with the part 15 rule, then a Class II application is required. Sincerely Yours, Jong-bok Lee Principle Research Engineer Markone Technology Co., Ltd. Phone: 82-10-9916-2536

TO:

Federal Communication Commission

Equipment Authorization Branch

7435 Oakland Mills Road

Columbia, MID 21046

Regarding: Confidential Request

To whom it may concern:

Date: July 19, 2021

This letter is to comply with Section 0.457(d)(2)(i) and 0.459 pertaining to confidential material.

We, Markone Technology Co., Ltd., would like the following documents regarding this submission for

FCC ID: 2AVZC-A000010007A to be kept confidential.

We are also hereby request Short Term Confidentiality for 180 days after the grant as outlined in Public

Notice DA 041705. This provision will give Markone Technology Co., Ltd. temporary confidentiality of

commercially sensitive information prior to product release.

The requested Permanent and Temporary Confidential exhibits are listed as follows:

The above material contains trade secrets or technical data, which would customarily be guarded from

competitors. We do not want these documents to be accessible to the general public.

Lee, Jong-bok / Chief Research Engineer

Markone Technology Co., Ltd.

TEL: +82

10

9916

2536

E-mail: james@markone

‐

‐

‐

tech.com

‐

Cover Letter-Modular Approval

FCC ID: 2AVZC-A000010007A

Date: July 19, 2021

Gentlemen:

There’s an A000020012A that would like to have your authorization as a modular

approval. The specific product as below, A000020012A with its designed features

and specified description, meets special requirements for Full modular approval on FCC

KDB996369 by cross-reference list below.

Company

Model Name

Model Number

FCC ID

Markone Technology Co., Ltd.

A000020012A

-A000010007A

2AVZC-A000010007A

Comply（Y/N）

Y

The EUT provides the RF shielding. See EUT

photo.

Y

The EUT has its buffered modulation. Please

see the Schematic Diagram.

its own power

Y

The EUT has

supply

regulation, please see the Schematic Diagram.

Y

The EUT meets

antenna

requirements; unique antenna connector and

photo of antenna are shown in the test report.

the FCC

Requirement of FCC KDB996369

a)The radio elements shall have the radio frequency circuitry

shielded. Physical / discrete and tuning capacitors may be

located external to the shield, but must be on the module

assembly.

2. The modular transmitter must have buffered

modulation/data inputs (if such inputs are

the module will

provided) to ensure that

comply with Part 15 requirements under

conditions of excessive data rates or over-

modulation.

3. The modular transmitter must have its

own power supply regulation.

4. The modular transmitter must comply with the

antenna and transmission system requirements

of Sections 15.203, 15.204(b) and 15.204(c).

The antenna must either be permanently

attached or employ a “unique” antenna coupler

(at all connections between the module and the

The

antenna,

“professional installation” provision of Section

15.203 is not applicable to modules but can

apply to limited modular approvals under

paragraph (b) of this section.

including

cable).

the

Y

The EUT was tested with a test board, Please

see test report and setup photo

Y

Please see exhibition label sample for the

FCC ID of this module. And also in the

exhibition Users manual,

are

instructions give to the OEM on how to label

the end product.

there

5. The modular transmitter must be tested

in a stand‐alone configuration, i.e., the

to

label referring

inside another device

module must not be

during testing.

6. The modular transmitter must be labeled with

its own FCC ID number, and, if the FCC ID is

not visible when the module is installed inside

another device, then the outside of the device

into which the module is installed must also

the enclosed

display a

module. This exterior label can use wording

such as the following: “Contains Transmitter

Module FCC ID : 2AVZC-A000010007A” or

“Contains FCC ID : 2AVZC-A000010007A”

Any similar wording that expresses the same

meaning may be used. The Grantee may either

provide such a label, an example of which must

be included in the application for equipment

authorization, or, must provide adequate

instructions along with the module which

explain this requirement. In the latter case, a

copy of these instructions must be included in

the application for equipment authorization.

included

instructions must be

explain any such requirements. A copy of

the

in

these

application for equipment authorization.

8. The modular transmitter must comply

with any applicable RF exposure

requirements. For example, FCC Rules in

Sections 2.1091, 2.1093 and specific

Sections of Part 15, including 15.319(i),

15.407(f), 15.253(f) and 15.255(g), require

that Unlicensed PCS, UNII and millimeter

wave devices perform

evaluation

for RF Exposure

compliance. In addition, spread spectrum

transmitters operating under Section 15.247

are required to address RF Exposure

compliance in accordance with Section

routine environmental

to demonstrate

7. The modular transmitter must comply

with any specific rule or operating

requirements applicable to the transmitter

and the manufacturer must provide adequate

instructions along with the module to

Y

The EUT is compliant with all applicable

for

FCC

maintaining compliance are give in the User

Manual.

rules. Details

instructions

Y

The EUT

requirement.

complies with RF exposure

By:

(Signature1)

Jongbok, Lee

(Print name)

Title:

Principle Research Engineer

On behalf of: Markone Technology Co., Ltd.

(Company Name)

Telephone: +82-10-9916-2536

15.247(b)(4).

Thank you.

Sincerely,

a) b) c) d) e) f) g) SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name Markone Technology Co., Ltd. 232, Yeongudanji-ro, Ochang-eup, Cheongwon-gu, Cheongju-si, Chungcheongbuk-do , South Korea Address Grantee Code FCC ID Contact Email Contact Phone Authorized Contact Name Jong-bok Lee 2AVZC 2AVZC-A000010007A james@markone-tech.com 82-10-9916-2536 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature:

Date: 10 July 2020 Jong-bok Lee Principle Research Engineer Print Name:

Title:

Applicant Declaration Rev:0.0

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Declaration Rev:0.0

TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: Confidential Request To whom it may concern:

Date: June 8, 2020 This letter is to comply with Section 0.457(d)(2)(i) and 0.459 pertaining to confidential material. We, Markone Technology Co., Ltd., would like the following documents regarding this submission for FCC ID: 2AVZC-A000010007A to be kept confidential. We are also hereby request Short Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 041705. This provision will give Markone Technology Co., Ltd. temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Temporary Confidential exhibits are listed as follows:

The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Lee, Jong-bok / Chief Research Engineer Markone Technology Co., Ltd. TEL: +82 10 9916 2536 E-mail: james@markone tech.com

Cover Letter-Miodular Approval FCC ID: 2AVZC-A00001 0007A(H Gentlemen:

cross-reference list below. HFCC ID QF) Date: June 08, 2020 Theres an AQ00010007A that would like to have your authorization as a modular approval. The specific product as below, AQ00010007A with its designed features and specified description, meets special requirements for H(Fulli&{ Limit modular approval on FCC KDB996369_ by FCC ID

| 2AVZC-A000010007A Company | Markone Technology |

Model Name | A000010007A |

Model Number | EAT63433507 |

Requirement of FCC KDB996369 Comply CYIN) CUP i EE ABR LILY, ASSEN) Y/NEL AALS. modulation/data inputs Gf such inputs are provided) to ensure that the module wil]

1. The modular transmitter must have its Y own RF shielding. The EUT provides the RF shielding. See EUT photo. 2. The modular transmitter must have buffered | Y The EUT has its buffered modulation. Please see the Schematic Diagram. 4. The modular transmitter must comply with the antenna and transmission system requirements of Sections 15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a umique antenna coupler

(at all connections between the module and the antenna, the cable). The professional installation provision of Section 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. including comply with Part 15 requirements under conditions of excessive data rates or over-modulation. 3. The modular transmitter must have its Y own power supply regulation. The EUT has its own power supply regulation, please see the Schematic Diagram. Y The EUT FCC requirements; unique antenna connector and photo of antenna are shown in the test report. meets the antenna 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the Y The EUT was tested with a test board, Please inside another device be module must not during testing. see test report and setup photo 6. The modular transmitter must be labeled with its own FCC 1D number, and. if the FCC HD is not visible when the module is installed inside another device, then the outside of the device info which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: Contains Transmitter Module FCC ID: 2AVZC-AG00010007A or Contains FCC ID: 2AVZC-A000010007A Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. y Please see exhibition label sample for the FCC ID of this module. And also in the exhibition Users manual, there are instructions give to the OEM on how to label the end product. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate Y The EUT is compliant with all applicable FCC rules. Details instructions _ for maintaining compliance are give in the User Sections 2.1091, 2.1093 and specific Sections of Part 15, including 15.319), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNIL and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance in accordance with Scction 15.247(b)(4). instructions along with the module to Manual. explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. 8. The modular transmitter must comply y with any applicable RF exposure The EUT complies with RF exposure requirements. For example, FCC Rules in requirement. Thank you. Sincerely,

(Signature}

Title: Principal Engineer On behalf of: Markone Technology _Jongbok, Lee

(Print name)