GR4 Technical Description Editor :
Department :
Tel. :
Fax. :
Email :
Original version :
Revision :
Version :
X. Gong SDYE-A-SH 86 21 58973302- 9412 Xun.gong@marquardt.com 05.19.2023 05.19.2023 1.0 Technical Description GR4 Functional description The GR4 (NFC reader) is a component of a driving authorisation system of a car. GR4NFC When the authorized digital key is close to GR4, it sends authorization data to the control unit to execute the access request like Door lock/unlock. GR4 /
NFC Reader PCB is fixed on decoration board through four location holes by hot melting plastic pins on the decoration board. The decoration board is then installed at driver side window frame in car. NFC PCB This device is not freely available on the market and is installed only by trained specialized personnel from the car manufacturer. To avoid risk of fire, please just connect the product to a power supply of which output capability is less than 15W. 15W Technical Description GR4 Technical Data:
Operating Voltage:
12v DC Operating temperature:
-40 ~ +85 degree PCB dimension: (71+79.4)*145.5/2 mm Frequency:
13.56MHz Components:
GR2 Technical Description GR4 FCC Regulations:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
If this equipment does cause harmful Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. connected. Consult the dealer or an experienced radio/TV technician for help. Connect the equipment into an outlet on a circuit different from that to which the receiver is FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. ISED Notice This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
1) this device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
1) l'appareil ne doit pas produire de brouillage, et 2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios. Cet appareil et son antenne ne doivent pas tre situs ou fonctionner en conjonction avec une autre antenne ou un autre metteur, exception faites des radios intgres qui ont t testes. The County Code Selection feature is disabled for products marketed in the US/ Canada. La fonction de slection de l'indicatif du pays est dsactive pour les produits commercialiss aux tats-Unis et au Canada. Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled Technical Description GR4 environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration d'exposition aux radiations:
Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Technical Description GR4
: Marquardt GmbH
: NFC Reader
: GR2
/ : Marquardt GmbH /
KC : R-R-MQU-GR2