FCC ID: W2YL3NF13C2 Furniture Lock with RFID

www.lehmann-locks.com GB Content Page General Description / Technical Specifications / Safety Precautions ........................................2 Care and Maintenance / Factory Settings / Functional Description..........................................3 Overview of Transponder Cards ...............................................................................................4 System Components and Package Contents ............................................................................5 Dimensions...............................................................................................................................6 Mounting on non-metal surfaces............................................................................................. 7 Mounting on metal surfaces ....................................................................................................9 Getting started and battery change / Tips for programming steps ........................................10 Using the installation card / Programming the Master card...................................................11 Programming the Master card / Closing and Opening ...........................................................12 Unauthorised Transponders cards / Facility Manager Function / Emergency Opening..........13 Deleting Individual Transponder Cards / Deleting All Transponder Cards ..............................14 Changing Operating Mode......................................................................................................15 Deactivating and activating acoustic signals / Resetting to factory settings...........................16 Activation and deactivation of automatic locking...................................................................17 Battery warning ......................................................................................................................18 Reordering master cards / Firmware update / Disposal / Troubleshooting............................19

) B G

8 1

1 1

2 2 0 2

E R A F I M 0 0 1 a r u t p a C A D B Operating instructionsCaptura (Captura 100 MIFARE) GENERAL DESCRIPTION The Captura 100 MIFARE lock is a battery-operated electronic furniture lock based on RFID technology, which is intended for use in living and office areas inside buildings. These operating instructions provide you with information on how to operate the locking system without errors. Keep the operating instructions in an easily accessible place. Improper use can destroy the locking system and lead to the loss of any warranty claims. Please be sure to observe all warnings and read the operating instructions completely before proceeding with installation, commissioning and programming. It may be possible to use our locks and locking systems together with mechanisms made by other manufacturers, but their compatibility must be checked in each individual case. We cannot accept any liability for damage or loss due to incompatibility. Wording and graphics have been prepared with care. However, no liability will be assumed for any mistakes that mayhave occurred. Technical specifications as well as the scope of items in the system are subject to change without notice. CAUTION: The lock can be configured with master and programming cards or with the LEHMANN Management Software LMS. These operating instructions describe how to use the locking system with master and programming cards. The software LMS and the corresponding documents can be found at https://

lms.lehmann-locks.com. TECHNICAL SPECIFICATIONS Frequency 13,56 MHz National legislation about permissible radio frequencies must be observed. RFID technology MIFARE Classic, MIFARE DESFire EV1, EV2 Supported transponders Compatible with the following RFID transponders:

MIFARE Classic / MIFARE DESFire / ISO 14443A Existing transponders must be checked for compatibility and reading distance. MIFARE Classic transponders are only supported in Assigned use mode. MIFARE Classic transponders cannot be used with the LMS. Energy supply 1 x CR123A Operating temperature

-5 C to +60 C Storage temperature

-25 C to +70 C Reading distance Up to 30 mm with LEHMANN user cards (MIFARE DESFire EV1). Other transponders may have a shorter reading distance and must be checked in advance. The material of the furniture can influence the reading distance. A test on the furniture regarding the reading distance is therefore recommended. Type designation L3NF13CX, L3NF13C1, L3NF13C2

SAFETY PRECAUTIONS U Pack the battery for the transport of the lock so that no short circuit can occur (risk of explosion and fire). U When replacing the battery, make sure that the polarity and position of the battery is correct!

U Dispose of used batteries properly!

U Do not heat batteries, take them apart or short-circuit them!

U Never throw batteries into open fire!

2 BDA Captura 100 MIFARE / 2022-11-18 (GB) U The battery must not be charged!

U Keep the product away from children, as small parts may be swallowed!

U Any persons swallowing batteries must seek immediate medical advice!

U Damaged and/or leaking batteries may cause acid burns and/or poisoning!

CARE AND MAINTENANCE U Do not spill any liquid over or into the individual components of the lock, and never immerse the components in any liquid. U The product should not be exposed to direct sunlight. U Clean the lock and the components with a clean, soft, damp cloth only. U Do not use any cleaning agents containing abrasives or solvents, as these may damage the housing. U Treating any of the electronic and mechanical components improperly or in any way other than described in these operating instructions may lead to malfunctions and the loss of warranty. U Change the battery in good time. At the latest, when the lock issues corresponding battery warnings. FACTORY SETTINGS The lock can be closed and opened at this point of time with one or more installation cards. After a Master card has been programmed, the lock is in the operating mode assigned use and the installation card cannot be used any more. FUNCTIONAL DESCRIPTION With the Captura 100 MIFARE lock, you can conveniently lock and unlock your furniture. Non-contact RFID technology based on 13.56 MHz is used as the key. Two operating modes are available:

Operating mode Description Assigned use Shared use There is a fixed assignment between the transponder cards and the locks. The user cards are programmed or deactivated at the lock by means of a master card. The system thus allows the granting of selective access authority for an item of furniture (e.g. cabinet), so that only authorised persons with a transponder card have access. A transponder card can be programmed simultaneously on multiple locks with Assigned use operating mode. Up to 250 different transponder cards can be programmed per lock. With the user card, a user can use a free lock / storage of his choice. It is not possible to program the user card using the master card. If a lock is closed with the user card, the user card and the lock are coupled to each other. The card cannot be used at any other lock in shared use mode, and the lock will not accept any other user card. This coupling is only deactivated when the user opens the lock again with his user card. The card can now be used for another lock. Please note that the distance between two or more locks with an inserted battery must be at least 10 cm (lateral distance) and 15 cm (frontal distance) during storage, transport and operation.

>10 cm

>15 cm 3 BDA Captura 100 MIFARE / 2022-11-18 (GB) OVERVIEW OF TRANSPONDER CARDS Card type Description Installation card

(only for assembly and testing purposes) Master card User card Programming card set The installation card can be used specially for assembly and testing purposes in order to perform basic functions on the lock (opening and closing). Furthermore, the lock can be closed using the installation card for transporting the furniture to its destination. This card is for universal use. Any number of installation cards can be used at any lock. Prior programming of a master card is not necessary. After a master card has been programmed for the first time, the lock is disabled for the installation card. The use of an installation card is optional. For complete commissioning, a master card must be programmed for both operating modes. The master card is required for starting and terminating programming operations. This also includes the programming of user cards in Assigned use mode. The master card also enables the so-called Facili-

ty Manager function and the emergency opening of the lock. A maximum of one master card can be programmed per lock. You can use one master card for several locks. User cards are used to open and close the lock. In Assigned use mode, up to 250 user cards can be programmed on one lock. In Shared use mode, one user card can be used temporarily on one lock. It is possible to program one user card on several locks in Assigned use mode, and at the same time on one lock in Shared use mode. For certain programming functions, programming cards are required in conjunction with the master card. The programming card set consists of 3 universal programming cards:

P1: Mode (change of mode) P2: Sound (activating or deactivating acoustic signals) P3: Reset (reset to factory settings) Programming card P4: Auto Locking The universal programming card P4: Auto Locking can only be used in the operating mode assigned use. The function can be activated together with the master card. After opening the lock with a programmed transponder in the operating mode assigned use, the lock closes automatically after 5 seconds once this function has been activated. Update card Service key In addition to the master card, you will receive an update card. In conjunction with the master card, the update card allows firmware updates to be loaded into this lock. In addition to the master card, you will receive a card with an individual service key. Please keep the card with the service key carefully and securely. The printed service key allows you to reorder master cards. It is not possible to reorder a master card without a service key! This card has no electronic function!

As user cards, you can either use LEHMANN user cards or cards of a third-party provider complying with ISO 14443A. Please note the following possible restrictions when using user cards of third-party providers:

The comprehensive security concept, which was specially designed for this locking system in conjunction with the user cards of LEHMANN Vertriebsgesellschaft mbH & Co. KG, may be affected by the use of user cards of a third-party provider. The Shared use operating mode is only possible with user cards from third-party providers if they have the appropriate write permission for the user card. Transponder cards with a so-called Random-UID are not supported. Transponders from third-party providers must be checked for compatibility and for reading distance in advance. For the highest possible level of safety, transponder cards based on MIFARE DESFire are recommended. MIFARE Classic transponders are of limited use (only in assigned use mode; not with LMS). Please note that installation cards, master cards, user cards and programming cards must be ordered separately. Please keep the master card as well as the card with the individual service key carefully and securely!

4 BDA Captura 100 MIFARE / 2022-11-18 (GB) SYSTEM COMPONENTS AND PACKAGE CONTENTS Please note that these operating instructions apply to different product versions. The package content therefore depends on the respective product variant. The product variants and mounting recommendations shown here are intended for wooden furniture with a thickness of 16-19 mm. In the case of deviating thicknesses and materials, the screws for mounting the lock must be adapted. o r o D Sidewall 7 9 6 8 1 3 4 5 2 Components:

1. Lock Captura 2. 4 x countersunk screw 3.5 x 35 cross recess 3. Battery (CR123A) 4. Cover for battery compartment 5. 1 x thermoplastic screw 3x 10 for cover of battery compartment 6. Locking pin (here Type A) 7. Ejector pin (only optional) 8. 2 x half-round 3.5 x 16 cross recess for locking pin 9. 1 x countersunk screw 3 x 13 cross recess

(only for locking pin Type A) 10. Lightpoint (only optional) DIMENSIONS Lock Captura 64 54 64 54 3,5 21 3,5 21 13 13 4 6 4 5 4,3 7 2 4 6 4 5 4,3 7 2 5 5 All dimensions in mm. BDA Captura 100 MIFARE / 2022-11-18 (GB) 5 2

, 5 3 1 Locking pin unit SD Type A 7,5 38 20 3,7 3,7 0 4

, 5 4 3 0 3

, 5 4 2 5 2 0 2 52 8

, 5 7 1 3,7

, 5 3 1 Locking pin unit SD Type A with ejector pin A1 7,5 65 3

, 7 20 3,7 0 4

, 5 4 3 0 3

, 5 4 2 0 4

, 5 4 3 0 3

, 5 4 2 5 2 0 2 5 2

, 5 3 1 7,5 38 20 3,7

, 5 2 1 8 52

, 5 7 1

, 5 3 1

, 5 2 1 7,5 65 20 The ejector pin A1 can only be installed together with the locking pin unit SD Type A.

, 3 7 3,7 1 2 8 5 7 1

, 19 7,5

, 8 7 2

, 8 7 1 Locking pin unit SD Type B 0 4

, 5 4 3 0 3

, 5 4 2 8 5 7 1

, 7,5 6 1 3,8 38 26 48 Front cover C1 for metallic surfaces 1 2

, 8 7 2

, 8 7 1 19 3,8 38 26 48 6 1 5,5 5,5 5,5 70 70 70 3,3 3,3 3,3 54 54 54 6,5 6,5 6,5 0 7 0 7 0 7 4 5 4 5 4 5

( 8,8

( 8,8

( 8,8

) 6 All dimensions in mm. BDA Captura 100 MIFARE / 2022-11-18 (GB) A lightpoint pin can optionally be installed to display optical signals on the furniture front. 9

, 1 Lightpoint O16.1 for wood with material thickness of 16-21 mm 9

, 1 5

, 9 Lightpoint O10.1 for HPL with material thickness of 10-15 mm 0 6,5 58

( 35

*) 48 0 5 0 6,5 5

, 5 1 0 5 IMPORTANT: Install the lock only when it is unlocked. Hand-tighten all screws. Carry out all programming 4 5 processes and functional checks with the cabinet door open. In the event of a malfunction, you always have access to all components. 0 2 The use of the ejector pin A1 in conjunction with spring-loaded hinges must be checked on a project basis. 7 2 54 10

( 32

) MOUNTING ON NON-METAL SURFACES Mounting the lock with locking pin SD Type A, e.g. for hinge doors:

58

( 35

*) 48 D o o r Side wall Inside of the door i S d e w a l l 4 5 0 2 7 2 54 10

( 32

* For an adequate fine adjustment of the locking pin, an average dimension of 53 mm is recommended 7 All dimensions in mm. 1 1 BDA Captura 100 MIFARE / 2022-11-18 (GB) Note that the lightpoint can be installed as an option. Without a lightpoint, only acoustic signaling is available. Mounting the lightpoint:

27 7 2 5 Mounting the lock with locking pin SD Type B, e.g. drawer:

Top Shelf -

inside view 4 5 27 7 1 54 C 8 To be installed without tools. 3 1 All dimensions in mm. BDA Captura 100 MIFARE / 2022-11-18 (GB) ATTENTION: If no lightpoint is installed, a sticker is recommended on the outside of the door, centered behind the lock, for correct positioning of the RFID transponder. Using the LEHMANN RFID sticker:

1) Remove the backing paper. 2) Stick the self-adhesive transfer film with the RFID symbol on the outside of the door, centered behind the lock. 3) Carefully pull off the transfer film so that only the RFID symbol sticks to the door. MOUNTING ON METAL SURFACES When installing the lock on metall surfaces, the cover C1 for metall surfaces is required. The separate lightpoint is not required because a lightpoint is already integrated in the cover. Only suitable for single-layer steel doors with a thickness of 0.5 - 2.5 mm. 4x Thermoplastic screw 3x25 Required hole punch in the door Implied screw-on socket Angedeutete Dome Frontcover Angedeutete Dome Frontcover Center point for Mittelpunkt fr Schliedorn Mittelpunkt fr Schliedorn locking pin R3 R3 1 1 6 6

)(7

)(7 23,5 23,5 61 61 Door 13,5 13,5 Side wall with locking pin SD Type A All dimensions in mm. R R T T

) n n r r o o d d e e i i l l h h c c S S d d n n u u a a g g e e m m O O t t i i m m

D D N N A A W W N N E E T T E E S S I I 9 Hole punch in the door 13,5

, 5 2 BDA Captura 100 MIFARE / 2022-11-18 (GB) GETTING STARTED AND CHANGING BATTERIES 1. Opening the cover of the battery compartment by loosening the screw. 2. Insert the battery. Pay attention to the correct polarity of the battery. A long acoustic and an optical signal are provided. 3. Then close the battery compartment cover and hand-tighten the screw. CAUTION: Use only a CR123A primary-battery. Insert the battery after installing the lock in the furniture. Inserting the battery Battery is inserted correctly in the battery compartment. TIPS FOR THE FOLLOWING PROGRAMMING STEPS The last 5 seconds before the shutdown of the programming process are announced by the flashing of a yellow lamp and acoustic signals. Optical signals are only available after mounting the optional lightpoint. The visual and acoustic signals are differentiated as follows. Optical signals Acoustic signals Quick flashing Short flashing Long flashing Short Long The RFID antenna is located on the back of the lock. Always place the transponder straight and centered on the lock. 10 BDA Captura 100 MIFARE / 2022-11-18 (GB) USING THE INSTALLATION CARD (optional) During installation, one or more installation cards can be used. The installation cards are ready for immediate use and do not have to be programmed. With the installation cards, the basic functions (opening and closing) can be carried out on the lock. It is not possible to program user cards with the installation card. The installation card can no longer be used on a lock as soon as the master card has been programmed. Closing Opening Hold the installation card in front of the lock. Hold the installation card in front of the lock. PROGRAMMING THE MASTER CARD Irrespective of the desired operating mode, a master card must always be programmed before further programming and operation. Only one master card can be programmed per lock! The programming of the master card can be carried out when the lock is closed as well as when it is open. If the lock is closed after the master card has been programmed, the next step must be an emergency opening (see Emergency opening, P. 13). Programming the master card for the first time Hold the master card in front of the lock. The locking system is in assigned use mode after the master card has been programmed. If you would like to use the lock in shared use mode, the next thing to do is to change the operating mode. To do this, please follow the instructions on page 15 and then continue with the section Closing and Opening on page 12. 11 BDA Captura 100 MIFARE / 2022-11-18 (GB) Programming the User Cards (only for assigned use mode) In assigned use mode, a maximum of 250 different user cards can be programmed per lock. It is not possible to program user cards in shared use mode. In shared use mode, the lock can be opened and closed without first programming the user cards (see Closing and Opening, see below). Programming user cards Hold the master card in front of the lock. Hold the user card in front of the lock. The card is accepted and programmed. This process can be repeated to program multiple user cards. Card is not accepted. Hold the master card in front of the lock. After programming, the user cards can open and close the lock. CLOSING AND OPENING Closing Opening Hold the user card in front of the lock. Hold the user card in front of the lock. 12 BDA Captura 100 MIFARE / 2022-11-18 (GB) UNAUTHORISED TRANSPONDERS CARDS Rejection of an unauthorised user card Unauthorised user card is held in front of the lock. The card is rejected. FACILITY MANAGER FUNCTION In the event that an authorised person only briefly wants to check whether for example a cabinet is actually occupied, the lock can be opened with the master card. With this function, the lock opens for 30 seconds and then closes automatically. After this automatic closure, authorised user cards can continue to be used in shared use mode as well as in assigned use mode. The last 5 seconds before closing are indicated by optical and acoustic signals. Facility Manager Function (lock closes automatically after 30 seconds) Hold the master card in front of the lock. EMERGENCY OPENING In the event that one or all authorised user cards are currently not available, an emergency opening can be effected with the master card. Please note that the lock remains open after emergency opening. In the shared use mode, the previously used user card is blocked after emergency opening, and can no longer be used. In assigned use mode, user cards can continue to be used normally. Emergency opening Hold the master card in front of the lock. Hold the master card again in front of the lock. 13 BDA Captura 100 MIFARE / 2022-11-18 (GB) DELETING INDIVIDUAL TRANSPONDER CARDS (only for assigned use mode) Insofar as further user cards were programmed on the lock, these can continue to be used on this lock after an individual user card has been deleted. For the deleting process, the lock must be open. To do this, first carry out an emergency opening with the master card if necessary (see Emergency opening, P. 13). Deleting individual user cards Hold the master card in front of the lock. Hold the user card to be deleted in front of the lock. Hold the master card in front of the lock. Should the user card be lost, then please proceed as follows. DELETING ALL TRANSPONDER CARDS (only for assigned use mode) The deleting process can only be carried out when the lock is open. Should there be no authorised user card to hand, first perform an emergency opening using the master card. Deleting all user cards 5 seconds IMPORTANT: Hold the master card in front of the lock until all the following optical and acoustic signals have been received. IMPORTANT: Hold the master card in front of the lock until all the following optical and acoustic signals have been received. 5 seconds 14 BDA Captura 100 MIFARE / 2022-11-18 (GB) Hold the master card in front of the lock. CHANGING THE OPERATING MODE The lock has two modes: assigned use and shared use. When the lock is open, you have the option of changing the mode. To do this, the master card and the programming card P1: Mode are required. The programming card set must be bought separately from LEHMANN Vertriebsgesellschaft mbH & Co. KG. The cards are for universal use. Changing the operating mode Shared use Assigned use Hold the master card in front of the lock. Hold the programming card P1: Mode in front of the lock. Shared use mode is selected. Hold the programming card P1: Mode in front of the lock again. Assigned use mode is selected. Hold the master card in front of the lock. 15 BDA Captura 100 MIFARE / 2022-11-18 (GB) DEACTIVATING AND ACTIVATING ACOUSTIC SIGNALS Acoustic signalling is activated when the system is delivered. You have the option of deactivating the acoustic signals with the aid of the master card and the programming card P2: Sound. For this, the lock must be open. It is recommended that the acoustic signals should only be deactivated if the RFID reader with the LED is mounted outside the item of furniture. Otherwise, neither visual nor acoustic signals are passed on to the users, making programming and possibly also operation difficult. Please note that the acoustic signals for the battery warning and for changing the operating mode cannot be deactivated. The programming card set must be bought separately from LEHMANN Vertriebsgesellschaft mbH & Co. KG. The cards are for universal use. Deactivating and activating acoustic signals Acoustic signals are deactivated Acoustic signals are activated Hold the master card in front of the lock. Hold the programming card P2: Sound in front of the lock. The acoustic signals are deactivated. Hold the programming card P2: Sound in front of the lock again. The acoustic signals are activated again. Hold the master card in front of the lock. RESETTING TO FACTORY SETTINGS (RESET) If a reset to factory settings is required, all master and user cards are deleted. With an installation card the basic functions (close and open) can be carried out. The bolt is retracted, and the lock must be reprogrammed with a master card. The reset function can be used with the help of the master card and programming card P3: Reset. For this, the lock must be open. The programming card set must be bought separately from LEHMANN Vertriebsgesellschaft mbH & Co. KG. The cards are for universal use. 16 BDA Captura 100 MIFARE / 2022-11-18 (GB) Resetting to factory settings Hold the master card in front of the lock. Hold the programming card P3: Reset in front of the lock. Hold the programming card P3: Reset in front of the lock again. Hold the master card in front of the lock. after about 10 seconds ACTIVATION AND DEACTIVATION OF AUTOMATIC LOCKING With the programming card P4: Auto Locking, the function automatic locking can be activated and deactivated in the operating mode assigned use. Once the function is activated, the lock closes automatically after 5 seconds after opening the lock with an authorized transponder. It is recommended to activate automatic locking after programming the transponders. The function can be carried out by using the master card and the programming card P4: Auto Locking. To do this, the lock must be in the mode assigned use and in an open position. If the operating mode changes, this function is automatically deactivated. The programming card must be purchased separately from LEHMANN Vertriebsgesellschaft mbH & Co. KG. The card can be used universally. NOTE: If the function automatic locking is activated, hold the master card in front of the lock immediately after opening in order to start the programming. Otherwise, the lock will lock automatically after 5 seconds. The lock must be in an open position for programming incl. programming user cards. Activate or deactivate the feature automatic locking Hold the master card in front of the lock. 17 continue on page 18 BDA Captura 100 MIFARE / 2022-11-18 (GB) Automatic locking is activated. Automatic locking is deactivated. Hold the programming card P4: Auto Locking in front of the lock again. Automatic locking is activated. Hold the programming card P4: Auto Locking in front of the lock again. Automatic locking is deactivated. Hold the master card in front of the lock. BATTERY WARNING The locking system is equipped with a battery management system which uses visual and acoustic signals to indicate the need for battery replacement in the event of reduced battery power. The battery warning takes place in two phases:

Battery warning Phase 1 Before an action can be carried out (closing /

opening / programming), a battery warning is given. The batteries should be replaced. The battery warning is also given every 60 minutes. Battery warning Phase 2 The lock can only be opened. Before the lock opens, a battery warning is given. The batteries must be replaced without delay. The battery warning is also given every 60 minutes. The settings are saved even without a power supply (e.g. in case of battery replacement, or in case the battery should be completely empty). Battery replacement should be carried out within 2 minutes. 18 BDA Captura 100 MIFARE / 2022-11-18 (GB) REORDERING MASTER CARDS With this locking system, you have the option of ordering replacements for your master cards at your own expense. For this you obtained a service key together with the master cards. Please keep the service key carefully and secu-

rely. The service key makes it possible to reorder the master card specified there. To reorder these cards, please contact LEHMANN Vertriebsgesellschaft mbH & Co. KG at the following email address:

sales@lehmann-locks.com In your email, please give us your contact data and the service key. In your email, please also state the number of replacement cards you require. FIRMWARE UPDATE You have the option of updating the firmware of the lock. A special adapter is required for this. Firmware updates for this lock are only made available on the website www.lehmann-locks.com if required (e.g. for technical reasons). You will receive further information on the implementation and installation together with the firmware update.

DISPOSAL Dispose the locking system in accordance with local regulations and guidelines. Remove the battery and dispose them separately in accordance with the national regulations. When disposing of partially discharged batteries, make sure that there are no short circuits between the battery poles (risk of explosion and fire). TROUBLE SHOOTING In the following overview you can see the acoustic and visual signals that indicate faults:

Transponder card cannot be programmed. Possible reasons:

Storage space is used up Card is not compatible Master card has not yet been programmed Available storage space in the lock is used up. Possible reasons:

250 user cards have already been programmed in the lock. Battery warning Phase 1 It is recommended that you replace the battery. Battery warning Phase 2 The battery must be replaced without delay. 19 BDA Captura 100 MIFARE / 2022-11-18 (GB) Regulatory Information for USA and Canada:

FCC ID: W2YL3NF13CX, W2YL3NF13C2 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. IC: 8141A-L3NF13CX, 8141A-L3NF13C2 HVIN: L3NF13CX, L3NF13C2 This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1. Lappareil ne doit pas produire de brouillage;

2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. LEHMANN Vertriebsgesellschaft mbH & Co. KG Postfach 26 20 D-32383 Minden Fon +49 571 / 50 599-0 Fax +49 571 / 50 599-822 info@lehmann-locks.com www.lehmann-locks.com DIN EN ISO 9001:2015 zertifiziert 20 BDA Captura 100 MIFARE / 2022-11-18 (GB)

Lable Location Info Label on Captura 100 Mifare / L3NF13C2 (20 x 20 mm) Location (Backside of device)

Long/Short-term Confidentiality Request Date: 30 November 2022 PHOENIX TESTLAB GmbH Product Certification Koenigswinkel 10 D 32825 Blomberg FCC ID: W2YL3NF13C2 To Whom It May Concerns, Pursuant to sections 0.457(d) and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the information long-term confidential requests Grantee hereby accompanying this application as outlined below:

treatment of Schematics Block Diagram Operational Description Parts List Tune-Up Info In addition, the Grantee hereby requests the following exhibits contained in this application to be temporarily (short-term confidentiality) withheld from the public disclosure for an initial period of 180 days until:

not applicable External Photos Internal Photos Test Setup Photos Users Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to rule 0.457(d), disclosure of this application and all accompanying documentation will not be made before the date of the GRANT for this application. If you have any questions, please feel free to contact me. Yours sincerely, Sabrina Berghahn Authorized Agent

[M M] MOBELSCHLOSSER

" ZYLINDER +

BUROMOBELSCHLOSS-SYSTEME Martin Lehmann GmbH & Co. KG Martin Lehmann GmbH & Co. KG - Postfach 2620 D-32383 Minden PHOENIX TESTLAB GmbH Product Certification Department Koenigswinkel 10 32825 Blomberg, Germany Power of Attorney To Whom It May Concern:

Please be advised that we, Martin Lehmann GmbH & Co. KG, authorize the following person from PHOENIX TESTLAB GmbH:

e Sabrina Berghahn e Bernd Steiner to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters in following countries:

USA, CANADA PHOENIX TESTLAB GmbH has our permission to use our technical documents for the approvals for the following device:

Product description as it is marketed: Electronic furniture lock FCC ID: W2YL3NF13C2 IC: 8141A-L3NF13C2 HVIN: L3NF13C2 PMN: Captura 100 MIFARE Unless future correspondence from Martin Lehmann GmbH & Co. KG, please extend your full cooperation to PHOENIX TESTLAB GmbH regarding matters to the a. m. product(s) to 12 months after the signatory date of this authorization. Contact Person: Jan BECKENDORF Position in the Company: | Development Engineer Date of Signature: November 18th, 2022 RelA Jar Beckendorf

(signature of the applicant) Martin Lehmann GmbH & Co.KG Am Kohigraben 6-10, D-32429 Minden-Bolhorst, Telefon 05 71 / 50 46 0, Fax 05 71 59 99 Bankverbindungen Commerzbank AG Minden Sparkasse Minden-Labbecke Martin Lehmann GmbH & CO. Pers, haft. Gesellschaft Martin Lehmann BLZ 490 800 25 - Kto.-Nr. 3 366 236 BLZ 490 501 01 - Kto.-Nr. 40 005 662 Kommanditgeselischaft : Sitz Minden Verwaltungsgeselischaft mbH - Sitz Minden IBAN: DE 16 4908 0025 0336 6236 00 IBAN: DE 76 4905 0101 0040 0056 62 BIC:COBADEFFXXX BIC: WELADED1MIN Registergericht Bad Oeynhausen HRA 2973 _Registergericht Bad Oeynhausen HRA 4766 Deutsche Bank AG Minden Geschaftsfuhrer Renate Schliter BLZ 490 700 28 : Kto.-Nr. 2 881 100. Dip|.-Wi.-Ing. Snke Schiiter IBAN: DE 55 4907 0028 0288 1100 00 BIC: DEUT DE 38490 USt.-IdNr. DE 126011565