FCC ID: 2A4MW-MWE813 Floor Standing Advertizing Digital Signage

Floor Standing Digital Signage User Guide(V1.2) Catalogue 1.Attention 2.Accessories 3.Installation Guidance 4.Operation Guidance 5.After-sales Support. Scan the QR code to open the link in browser. To get the video guidance of the installation and the usage on YouTube. 1. Attention 1)Please have a check on the user guide about the operation guidance before using. 2)Do not splash liquid on the digital signage. 3)Do not put the digital signage under sunlight directly. 4)Normal use is protected by our warranty terms. Damage caused by abnormal use is not protected by warranty terms. 5)If you required with any support from us, please contact our after-sales support team. 2. Accessories Whats in Box:

Body&Base Power Cord*1 Remote Controller*1 M6 screw*16 Cross screw driver*1 Wheels*4 Allen wrench*1 M8 screw*6&Key*2 3. Installation Guidance 1)Wheels installation on the base(If you dont want install wheels, jump to next step). Using the cross screw driver to screw in the 4 M6 screws on each wheel. 2)Put the digital signage body on a bench, and install the base. Use the Allen wrench to screw in the 6 M8 screws to fasten the base. 3)Put the signage on the floor, get the power connected. And turn the power switch on. 4. Operation Guidance 1)Remote controller 2)The Autoplay application will start up automatically. The quick starting is the Plug and Play Mode function. Put your media contents into the USB flash disk root directory. And plug into the digital signage USB port. It will play the media contents automatically. 3)Also you can make settings on the Autoplay application, set with Copy Mode. Set up a file folder named with AutoPlayFile on your USB flash disk. Put your media contents into that AutoPlayFile. After you plugged your USB flash disk into the digital signage, it will copy the media contents from your USB flash disk AutoPlayFile into the digital signages internal memory. So that you can plug out your USB flash disk after your media contents was copied successfully to the internal memory. 4)HDMI Input Supported. You can install your player box inside of the digital signal. Theres AC power plug and HDMI input port inside the door available for your player box. Make the settings on digital signage. Set on the Auto Start Settings, select the HDMI input, so that it will display the HDMI input signal automatically after the digital signage powered on. 5)Timer Switch You can make auto ON/OFF schedule on the Timer switch application. 5. After-sales Support If you have any technical inquiries or need any product services, like software installation, system update and etc.. Please contact us directly. Email:

support@marveltechgroup.com Phone:

6284885213 (WhatsApp Online)

+8618123978547 (WhatsApp Online) FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

connected. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is Consult the dealer or an experienced radio/TV technician for help. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Appendix ID Label FCC ID: 2A4MW-MWE813 Model: MWE813 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. FCC ID: 2A4MW-MWE813 TB-RF-074-1.0 Appendix ID Label Location FCC ID: 2A4MW-MWE813 TB-RF-074-1.0

Marvel Technology(China)Co.,Ltd Block 14, Longbi Industrial Park, No 27 Dafa Rd, Bantian LongGang District, Shenzhen China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-11-24 To whom it may concern:

We, Marvel Technology(China)Co.,Ltd, hereby certify that the equipment for which authorization is sought FCC ID: 2A4MW-MWES13 is not covered equipment prohibited from receiving an equipment authorization pursuant to 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (httos:/Awww.fcc.gow/supplychain/coveredlist) as an entity producing covered equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(b) and (d)(5) and (6). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Sincerely, Signature Qing hu Zhou Gevghu Zhou Manager Marvel Technology(China)Co.,Ltd

Add: Block 14, Longbi Industrial Park, No 27 Dafa Rd, Bantian LongGang District, Marvel Technology(China)Co.,Ltd Shenzhen China Date: 2023-11-24 FCC ID: 2A4MW-MWE813 Dear Sir/Madam, We, Marvel Technology(China)Co.,Ltd Hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model(s) are the same, Only model number is different for these model:

Product name: Floor Standing Advertizing Digital Signage Model no.: MWE813, MWE831, MWE832, MWE956 Sincerely, Name/Title :

Company:

Address:

Phone:

Fax:

E-Mail:

Qing hu Zhou/Manager Gang hw. Zhe Marvel Technology(China)Co.,Ltd Block 14, Longbi Industrial Park, No 27 Dafa Rd, Bantian LongGang District, Shenzhen China

(+86)-18033091741 0755-28222764 pm14@marveltechgroup.com 2 ow won an

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2023-11-24>

Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

ECC ID 2A4MW-MWE813 Model name MWE813 For the product stated above, we request that the following information be held confidential;

Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days |

External Photos O Internal Photos Block Diagram Schematics DxIIC<I Test Setup Photos User's Manual Parts List Tune Up Operational Descriptions X The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. els leat Sincerely, Name/Title:

Company:

Address:

Phone:

Fax:

E-Mail:

zhu.

: NM Qing hu Zhou/ Manager a nav Marvel Technology (China)Co.,Ltd Block 14, Longbi Industrial Park, No 27 Dafa Rd, Bantian LongGang District, Shenzhen China

(+86)-18033091741 0755-28222764 pm14@marveltechgroup.com aa tiees babe

Marvel Technology(China)Co.,Ltd Block 14, Longbi Industrial Park, No 27 Dafa Rd, Bantian LongGang District, Shenzhen China Date: 2023-11-24 FCC ID: 2A4MW-MWE813 Model Number: MWE813 To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To Whom It May Concern, We, Marvel Technology(China)Co.,Ltd, declare that this EUT FCC ID: 2A4MW-MWES13 doesnt have Ad Hoc mode function on non-US/Canada frequencies. In addition. The frequency selection feature is disabled by firmware for devices marked to the US/Canada. For DTS part of this device, only channels 1-11 will be used in North America, Country code selection is disabled. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, Name/Title:

Company:

Address:

Phone:

Fax:

E-Mail:

Qinghu Zhou/ Manager Qnghw. Zhou Marvel Technology (China)Co.,Ltd Block 14, Longbi Industrial Park, No 27 Dafa Rd, Bantian LongGang District, Shenzhen China

(+86)-18033091741 0755-28222764 pm14@marveltechgroup.com on bebe ans

Marvel Technology(China)Co.,Ltd Block 14, Longbi Industrial Park, No 27 Dafa Rd, Bantian LongGang District, Shenzhen China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-11-24 To whom it may concern:

We, Marvel Technology(China)Co.,Ltd the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2A4MW-MWE813 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins current valid General Terms and Conditions

(AGB),Testing and Certification Regulations (PZO) which can be viewed on following website www.eurofins.de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title: Qing hu Zhou/ Manager haghu Zhe. g re wn Company: Marvel Technology(China)Co.,Ltd Address: Block 14, Longbi Industrial Park, No 27 Dafa Rd, Bantian LongGang District, Shenzhen China Phone: (+86)-18033091741 Fax: 0755-28222764 E-Mail: pm14@marveltechgroup.com Fy 3

Marvel Technology(China)Co.,Ltd Block 14, Longbi Industrial Park, No 27 Dafa Rd, Bantian LongGang District, Shenzhen China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-11-24 U.S. Agent Designation Marvel Technology(China)Co.,Ltd acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought FCC ID: 2A4MW-MWES13 Name and company of U.S. agent: ACT Lab LLC Physical U.S. address of agent: 3280 East 59th Street Long Beach, CA 90805 United States FRN of U.S. agent: 0033465568 Email address of U.S. agent: shuber@act-lab.com ACT Lab LLC acknowledges their obligation to accept service of process on behalf of Marvel Technology(China)Co.,Ltd. Marvel Technology(China)Co.,Ltd with the FRN 0031987969 accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 DO1. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature Signature Qing hu Zhou Biman au Scott Huber Senior Technical Director ACT Lab LLC Manager Marvel Technology(China)Co.,Ltd

<6 eee ey