PC-217237 Bluetooth stereo headset Users manual Contents
Brief introduction....1 1. Bluetooth wireless communication technology.........1 2. About PC-0217237........1
Before use.....2 1. Overview.......2 2. Charging the headset.....3
Getting started.....3 1. Turning on/off the headset.....3 2. Pairing the headset with Bluetooth devices.......4 How to enter pairing mode.......4 Pairing the headset with a Bluetooth cell phone.......................4 Pairing the headset with a Bluetooth transmitter......5 Multi-pairing.....6 3. Re-connecting with a Bluetooth device.....6 4. Wearing the headset...7 5. Making a call with the headset......7 6. Music playback......9 7. LED indicator...10 8. Indication tone..........11
Care and maintenance....11
FAQs.....11
Specifications...........13 headset, PC-217237. Please read this Welcome to use this Bluetooth stereo headset, BTH015. Please read this users manual carefully before use.
Brief introduction 1. Bluetooth wireless communication technology Bluetooth is a standard of close range wireless communication technology that was drawn up by Ericsson, IBM, Intel, Nokia and Toshiba. With Bluetooth technology, we can achieve the highest transmission rate among cell phones, computers, printers, PDAs and other devices. The max transmission range of class II is 10 meters while the max transmission range of class I can reach up to 100 meters. 2. About PC-217237 BTH015 is a Bluetooth stereo headset. Its foldable and retractable design is PC-217237 is a Bluetooth stereo headset. It very easy to take with you. It supports the following Bluetooth profiles:
HSP Headset Profile HFP Hands-free Profile A2DP Advanced Audio Distribution Profile AVRCPAudio/Video Remote Control Profile You can enjoy music wirelessly by using BTH015. It has the following You can enjoy music wirelessly by using PC-217237. It has the following features:
1) Pairing with a Bluetooth cell phone or PDA supporting HFP profile.
Answer a call, end a call and reject a call
Redial last number
Voice dial
Adjust the volume
Call transfer between the headset and your Bluetooth cell phone
Microphone mute 2) Pairing with a Bluetooth music device or Bluetooth transmitter supporting A2DP profile.
Enjoy music wirelessly
Adjust the volume
Remote control pause/play
Remote control previous/next track 1 3) Easy to switch between the call and music, you will not miss the incoming call during listening to music. 4) Every time the headset is turned on, it will connect to last connected device automatically. Note: Even though the paired device and the headset support the same Bluetooth profiles, functions may vary due to specification differences of the paired devices.
Before use 1. Overview Foldable and retractable headhand
+ button: Volume up 1 2 3 button: Previous track 4 button: Next track 5 Built-in microphone 6 7 8 Charging jack 9 button: Volume down 2 LED indicator Multi-function button (MFB): Power on/power off/answer a call/end a call/reject a call/microphone mute/call transfer/redial last number/voice dial/pause/play 2. Charging the headset The headset comes with a built-in rechargeable battery, prior to using it, it is recommended to charge the battery fully for the first time. When the headset is low power, red LED flashes twice and the headset emits three Dong tones every 20 seconds. Please recharge the battery of the headset. Connect the USB cable to a computer USB port and the USB cable plug to the charging jack of the headset. Red LED is on while charging. It takes about 3 hours to charge the battery fully. When charging has completed, red LED will be off. Remarks:
1) The battery is recyclable. 2) Batteries (battery pack or batteries installed) shall not be exposed to excessive heat place, such as sunshine, fire or the like.
Getting started 1. Turning on/off the headset Function Power on Power off Operation Press and hold MFB button for 35 seconds until blue LED flashes Press and hold MFB button for 35 seconds until red LED flashes LED indicator Blue LED is on for 1 second Red LED is on for 1 second 3 Remark: In order to save power, the headset will turn off automatically if no devices can be connected after 5 minutes. 2. Pairing the headset with Bluetooth devices How to enter pairing mode Function Operation LED indicator Entering pairing mode Ensure the headset is turned off, otherwise turn it off first and then press and hold MFB button for 67 seconds until LED flashes red and blue alternately LED flashes red and blue alternately Remark: Pairing mode will last 2 minutes. If no devices can be connected after 2 minutes, it will return to standby mode automatically . Pairing the headset with a Bluetooth cell phone Prior to using the headset for the first time, you have to pair it with a Bluetooth-enabled cell phone. The pairing procedures are subject to different models of cell phones. Please refer to your cell phone users manual for further information. The general pairing procedures are as follows:
1) Place the headset and Bluetooth cell phone where they are easily viewable by no more than 1 meter apart;
2) Enter the headsets pairing mode (please refer to How to enter pairing mode);
3) Activate your cell phones Bluetooth function and set your cell phone to search for Bluetooth devices within range, and select PC-217237 from the search for Bluetooth devices within range, and select BTH015 from the list of devices shown;
4) According to the indication, enter password or PIN No: 0000;
5) If prompted by your cell phone to connect, select Yes (this will vary among cell phone models);
6) After successful connecting, blue LED flashes twice or three time every 4 seconds. You should now be able to make and receive a call using the headset. Remarks:
If pairing is failed, please turn off the headset first and then re-pair according to steps 16 mentioned above. 4
After pairing is successful, the headset and the cell phone will remember each other, they will no need to re-pair next time. The headset can remember 8 paired devices, When the number of paired devices exceeds 8, the first one will be replaced.
Every time the headset is turned on, it will connect to last connected device automatically. If you want to pair it with other devices, please turn off the Bluetooth function of last connected devices first and pair the mode);
headset with the new device according to steps 16 mentioned above. Pairing the headset with a Bluetooth transmitter You can connect the headset to a Bluetooth transmitter to enjoy music wirelessly. Hereby take BTT010 (Bluetooth transmitter for iPod, not included) for example. The pairing steps are as follows:
1) Place the headset and the Bluetooth transmitter where they are easily viewable by no more than 1 meter apart;
2) Enter the headsets pairing mode (Please refer to How to enter pairing 3) Turn on the Bluetooth transmitter. It will search for Bluetooth devices automatically and send a pairing request;
4) When the headset requests to enter a PIN No., the transmitter will 5) After successful pairing and connecting, blue LED of the headset will response 0000 automatically;
flash twice every 4 seconds. Remarks:
The pairing password of the headset is 0000. So, the headset can only pair with a Bluetooth transmitter whose pairing password is 0000.
If pairing still fails after several tries, please refer to the Bluetooth transmitters users manual for further information. 5 Multi-pairing The headset can connect with two devices at most. One is a Bluetooth cell phone supporting HFP profile, the other one is a Bluetooth music device supporting A2DP profile. If you want to finish the multi-pairing, please refer to the following steps:
1) Firstly, pair the headset with a Bluetooth transmitter (refer to pairing the headset with a Bluetooth transmitter);
2) Turn off the Bluetooth transmitter;
3) Pair and connect the headset with a Bluetooth cell phone (refer to pairing the headset with a Bluetooth cell phone). 4) Turn on the Bluetooth transmitter, it will connect to the headset automatically. Remarks:
After successful multi-pairing, the paired devices will remember each other. Unless pairing information is deleted because of new pairing, they will no need to pair next time. If the pairing information is deleted, please connect the mobile phone with the headset first and then turn on the Bluetooth transmitter, multi-connecting can be performed.
For the cell phone supporting the HSP and A2DP at the same time. It may set up HSP and A2DP connection with the headset simultaneously. At this time, the Bluetooth transmitter may not connect to the headset. 3. Re-connecting with a Bluetooth device 1) Automatic connecting Every time the headset is turned on, it will connect to last connected device automatically. 2) Manual connecting When the headset doesnt connect to a device supporting HFP, double click MFB button, it will connect to last connected HFP device. When the headset doesnt connect to a device supporting A2DP, short press MFB button, it will connect to last connected A2DP device. Remarks:
Before connecting to a Bluetooth device, please turn on the Bluetoth devices Bluetooth function.
On some Bluetooth devices, take some Nokia cell phones for example, you have to allow automatic connecting in the cell phones settings. Please refer to your cell phones manual for further information. 6 4. Wearing the headset The headhand of the headset is foldable and retractable, please adjust according to the actual use. Logo L of the headset represents left ear, Logo R of the headset represents right ear. Please wear the headset according to the indication of the Logo. 5. Making a call with the headset 1) Basic operation Function Status of PC-217237 Operation Cancel calling Calling Short press MFB button Short press MFB button Press and hold MFB button for 2 seconds and release it until hearing indication tone Short press MFB button Touchbutton, when touch button all the time, the volume will increase continuously Touchbutton, when touch button all the time, the volume will reduce continuously Press and hold MFB button for 2 seconds and release it until hearing indication tone Press and hold MFB button for 2 seconds and release it until hearing indication tone Short press MFB button twice Short press MFB button twice Answer a call Incoming ring Reject a call Incoming ring End a call During a call Volume up During a call Volume down During a call During a call During a call During a call During a call
(microphone mute) Call transfer
(headset to mobile phone) Call transfer
(mobile phone to headset) Microphone mute Cancel mute Function Voice dial 7 Status of 237 Standby mode and connected to a device Operation Simultaneously press and hold MFB buttons for 2 seconds and release them until hearing indication tone Redial last number Lock/unloc k the buttons Clear pairing list Standby mode and connected to a device Standby mode Charging Short press MFB button twice Simultaneously press and hold MFB andbuttons for 2 seconds and release them until hearing indication tone Firstly press and hold MFB button and then press and hold button for 5 seconds, and release them until red LED flashes once 2) Three-way call Function End current call and answer a new incoming call Keep current call and answer a new incoming call Call transfer End current call and switch to reserved call Status of PC-217237 There is a new incoming call There is a new incoming call During a callkeep another call During a callkeep another call Operation Short press MFB button once Short press MFB button twice Short press MFB button twice Short press MFB button once Warning: Excessive pressure from earphones and headphones can cause hearing loss. 8 Remarks:
Not all cell phones support all functions listed above. Please refer to your cell phones users manual for further information.
Certain functions and indication tones maybe vary with different models of cell phones.
When the volume is adjusted to max. or min., you will hear a indication tone.
When pressing the answer button on some cell phones, the call will be transferred to the cell phone. You have to switch the call to the headset manually then. Please refer to your cell phones users manual for further information. 6. Music playback After connecting the headset to a Bluetooth cell phone or Bluetooth transmitter supporting A2DP, you can enjoy music with the headset. Function Volume up Volume down Pause Play Previous track Next track Status of PC-217237 Playing music Playing music Playing music Pausing Playing music Playing music Operation Touchbutton, when touch button all the time, the volume will increase continuously Touchbutton, when touch button all the time, the volume will reduce continuously Short press MFB button Short press MFB button Touch button Touch button Remarks:
When playing music on some cell phones, the music will be transmitted to the cell phones speaker instead of the headset. You have to select transmit the sound via Bluetooth in the settings menu and then choose PC-217237 as speaker device. The music will be transmitted to the BTH015 as speaker device. The music will be transmitted to the headset. Please refer to your cell phones users manual for further information. 9 tone.
When the volume is adjusted to max. or min., you will hear a indication
If you want to remote control previous/next track, pause/play, it needs your Bluetooth cell phone or Bluetooth transmitter paird with the headset to support AVRCP profile, please refer to the users manual of your cell phone or Bluetooth transmitter for further information. 7. LED indicator 1) When the headset is charging LED indicator Red LED is on Red LED is off Status of the headset Charging in progress Finish charging 2) When the headset connected to a Bluetooth device LED indicator Status of the headset LED flashes red and blue alternately Blue LED flashes once every 3 seconds Blue LED flashes twice every 5 seconds Blue LED flashes 3 times every 5 seconds Blue LED flashes twice or 3 times every 5 seconds Blue LED flashes twice every 4 seconds Blue LED flashes once every 5 seconds Red LED flashes twice every 20 seconds Pairing mode Not connected to a Bluetooth device Connected to a HFP device or A2DP device) Simultaneously connected to a HFP device and A2DP device Calling Incoming ring During a call Low power 8. Indication tone Indication tone Two short DU tones Emits 2 tones every 5 seconds 10 Status of PC-2175237 Enter pairing mode During a call (Microphone mute) Emits 3 Dong tones every 20 seconds Low power
Care and maintenance Read the following recommendations before using the headset. Following these you will be able to enjoy the product for many years.
Do not expose the headset to liquid, moisture or humidity to avoid the products internal circuit being affected.
Dont use abrasive cleaning solvents to clean the headset.
Do not expose the headset to extremely high or low temperature as this will shorten the life of electronic devices, destroy the battery or distort certain plastic parts.
Dont dispose of the headset in a fire as it will result in an explosion.
Dont expose the headset to contact with sharp objects as this will cause
Dont let the headset fall down onto the floor. The internal circuit might
Dont attempt to disassemble the headset as it may get damaged if you In case the headset doesnt function properly, send it to the store you bought it. The staff will help you to solve the problem.
FAQs 1 Why does red LED flash twice every 20 seconds?
The headset is low power, it needs to be recharged. 2 Why isnt red LED on when charging?
a) Please make sure the USB charger connects well with the headset;
b) When you didnt use the headset for a long time, the battery may dry up. At this time, you have to charge the battery for 30 minutes, and then the red LED will be on. scratches and damage. get damaged. are not professional. 11 3 How far is the effective range between the headset and Bluetooth cell phone?
According to the Bluetooth standard, the max. controllable range of Class II headset is 10 meters. It varies under different environment. 4 What to do when my cell phone can not search and find the headset?
The cell phone will not find the headset if the headset and cell phone are not under the pairing mode. Make sure the headset is under the pairing mode and in the effective working range, and then the headset can be paired and connected. 5 Why cant hear the voice from the headset?
a) Make sure the headset is turned on;
b) Ensure the volume of the headset is not too low or mute;
c) Make sure the headset connects well with your cell phone;
d) Ensure the distance between the headset and your cell phone is in the normal working scope. 6 Why is there no voice when making a call with the headset?
a) Make sure your cell phone is in the strong signal area;
b) Ensure the headset is in the function range. 7 Why cant I remotely control the pause, play, previous track and next track functions with the headset when playing music?
The function needs the Bluetooth device paired with the headset to support AVRCP (Audio/Video Remote Control Profile). Please make sure your cell phone or Bluetooth transmitter supports AVRCP profile.
Specifications Bluetooth specification Bluetooth profiles Operating distance Working time 12 Bluetooth V2.1+EDR HSP, HFP, A2DP and AVRCP 10 meters, Class II Music: Up to 10 hours Standby time Charing input Charging time Dimensions Weight Talk: Up to 11 hours 200 hours DC 5V About 3 hours 15815655mm 103 g 130mA Notes:
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. 13