Quick Start Guide Model: D1000 PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT AND KEEP THIS MANUAL FOR FUTURE REFERENCE. Kit Content JSW Smart Lock JSW Smart Lock Keypad Mounting Plate Rubber Door Sensor Mounting Plate Tail Piece AA Alkaline Battery *4 Deadbolt Pack Strike Plate Set Deadbolt *1 Screw *4
(Strike Plate & Deadbolt) Template Screwdriver Screw Pack Screw for Mounting Plate M4 *20mm *3 for 35~40mm door thickness M4 *30mm *3 for 40~50mm door thickness M4 *40mm *3 for 50~60mm door thickness Stando Spacer 35mm *1 Stando Spacer 25mm *2 Screw for Smart Lock *1
(M4 *17mm) Screw for Battery Cover *2
(M4 *6mm) Reset Pin 2 Specication Number Keypad Lock/Return Button
* Lock the door.
* Restart the password if input error. Unlock Button
* Press it after unlock password input. Battery Cover Thumbturn Internal Lock Button USB Port Reset/Bluetooth Switch Reset: Long press 5 seconds for returning to factory default setting. Bluetooth Power: Short press 1 second for turn on or o the bluetooth. Model Name Unlock Options Battery Life Power Supply Emergency Supply Low Power Alarm Password Capacity Password Length Phantom Password Smart Lock D1000 Password/BT5.0(BLE) 10 Unlocks/Day for 1 year AA Alkaline Battery *4 USB 5 V+/- 0.2V 4.8V +/- 0.1V 100 sets 6 ~ 12 digit numbers Door Open/Closed Detection Auto-Lock Keypad Lockout Event Record Working Temperature Working Humidity YES YES YES 3 min 1000
-20-+50 RH10%~95%
High-Temperature Alarm 65 3 Preparation 1 Check Points Handle under the deadbolt Handle above the deadbolt Door Thickness
>170mm 35mm
~60mm 1. The distance between door handle and deadbolt.
>50mm 2. The door thickness. 2 Door thickness & Tail piece length Please adjust the length of tail piece based on the door thickness. Door Thickness (mm) Tail piece (slice) 30-39 40-49 50-59
>60 3 2 1 0 30 40 50 60 For example:
Please cut 1 parts of slice on the tailpiece with tool if the door thickness is between 50mm~59mm. 3 Remove the battery cover from the Smart lock Top View of Battery Cover Press the button on the top of the battery cover and pull it out. 4 Remove the current lock Skip this step if using original deadbolt. 5 Adjust the deadbolt length Please measure the distance from the center of the drilled hole to the door frame. 1. 60 mm 2. 70 mm 60mm default 60mm/70mm 70mm optional Rotate 4 Installation Step 1: Install the deadbolt
(Skip this step if using original deadbolt) 1 2 3 4 Twist the+and ensure the plate line up the bolt. Deadbolt must be in retracted position. Screw: Bolt screw *2 Adjust the bolt length and make sure the + hole of deadbolt in the middle of the door hole. 1 2 3 4 4 Step 2:
Drill the xing hole on the door
(optional) Positioning the template to the deadbolt hole and drill a xing hole. Fixing Hole 1 Back of Smart Lock Keypad Step 3: Install the keypad on the outside of the door Screw the stando spacer into the keypad. Run the cables through the hole BELOW the deadbolt. Turn the +hole and ensure the deadbolt extend-retract smoothly. 1 2 3 Stando Spacer(30mm)
(optional) Stando Spacer(20mm) *2 2 UP 3 UP UP Step 4: Install the mounting plate 1 2 3 Run the cable through the rectangle hole on the right. Screw: Mounting plate screw *3. Turn the +hole and ensure the deadbolt extend-retract smoothly. 3 NOTE:
Screw for Mounting Plate M4 *20mm *3 for 35~40mm door thickness M4 *30mm *3 for 40~50mm door thickness M4 *40mm *3 for 50~60mm door thickness 1 2 Step 5: Install the door sensor Ensure the sensor is close to the frame. 1 1 Tape the sensor on the door. Fasten the sensor onto the mounting plate. 2 1 2 1 2 Step 6: Fit in the mounting plate rubber The door senor cable goes through the hole in the middle. The keypad cable goes through the rectangle hole on the right. 1 2 Step 7: Insert the cable connector onto the smart lock Black Step 8: Insert the tail piece Ensure the thumbturn is in vertical position. The deadbolt must be in retracted position. 1 2 1 2 Step 9: Mount the smart lock onto the door Please screw the Smart Lock in the following order:
1 2 Screw the Smart Lock. Screw the batttery cover. 1 Screw(smart lock) *1 2 Screw(battery cover) *2 Step 10: Test the smart lock Step 11: Insert the batteries and put the battery cover back on. Inside 5 APP Guide Please download and install the J-LOCK APP to your smartphone. Search the app in the App Store or Google Play Store. FCC WARNING Any Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference that may be received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Canada Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
1) Lappareil ne doit pas produire de brouillage;
2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est suscepti-
ble den compromettre le fonctionnement. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l'exemption des limites courantes d'valuation dans la section 2.5 de RSS 102 et la conformit l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformit de rf.