all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User manual | Users Manual | 2.02 MiB | ||||
1 |
|
Internal photos | Internal Photos | 703.60 KiB | ||||
1 |
|
External photos | External Photos | 426.43 KiB | ||||
1 |
|
Label | ID Label/Location Info | 45.60 KiB | ||||
1 |
|
Cover letter | Cover Letter(s) | 34.54 KiB | ||||
1 | RF Exposure Info | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | User manual | Users Manual | 2.02 MiB |
Users GUide ManUel dUtilisation ManUale dUso BedienUnGsanleitUnG ManUal de Uso 4 10 16 23 29 T E RCO M IN M OBILE G PS P 3/MP4 M MEG Lazer Link bichro 135 X 80 mm DEF.indd 1 21/11/12 11:48 T E RCO M IN G PS T E RCO M IN M OBILE G PS P 3/MP4 M D C E C B A D M OBILE MEG Lazer Link bichro 135 X 80 mm DEF.indd 3 A A1 C B E F
- 3 -
21/11/12 11:48 UK WeLCOme Congratulations and thank you for choosing the Lazer Link, the innovative handfree Bluetooth system especially designed for the Lazer helmets to allow easy and safe audio communication in motion. The Lazer Link is compatible with all audio Bluetooth transmitting devices in HSP, HFP and A2DP profiles (Mobile, GPS, MP3, MP4, or any device compatible with all of the aforementioned functions). It can also be associated
(paired) with any Bluetooth audio receiver device, or to another Lazer Link, establishing an audio communication
(intercommunication) up to a distance of approximately 10 metres, maintaining the association with the mobile or corresponding device at the same time. This device can be fully operated with only one control button (A). A single LED (red/blue) (A1) is the indicator of its functions: pairing, charging, on/off, low battery indicator. The Lazer Link weighs only 55g approximately. In order to get the best use out of your Lazer Link, please read this manual thoroughly, and then keep it in a safe place for later use or visit http://www.lazerhelmets.com/fr/innovations-2/lazer-link CHARGING THe LAZeR LINK Before using the Lazer Link for the first time, the battery (D) must be fully charged. Plug the charger (F) into the socket, and then insert the other end of the cable to the Lazer Link mini-USB jack (B) While the battery is charging the red LED (A1) is on, and will turn off once it is fully charged. NOTE: Never unplug the devices by pulling from the cable. NOTE: It is recommended to completely charge the battery each time, this will extend the battery life time. NOTE: When the battery is charged completely but has not been used for a long time, it may have less energy storage than normal. After being used and recharged a few times, the energy storage will increase back to normal. INSTALLING THe LAZeR LINK See the video on how to install the Lazer Link on our website:
http://www.lazerhelmets.com/fr/innovations-2/lazer-link PAIRING WITH A mOBILe OR NAVIGATOR (GPS) To be able to use the Lazer Link you have to associate it with the Bluetooth device you want to connect it to (Mobile, GPS, etc.). To do this, when the Lazer Link is switched off, press and keep the control button (A) pressed until the LED (A1) starts to flash alternately in Red and Blue. When looking for Bluetooth devices in the mobile or navigator, you should find the device called Lazer Link. Select the Lazer Link device and if requested enter the 0000 access code. SWITCHING ON / SWITCHING OFF To switch on your Lazer Link press and hold the control button
(A), until you hear a beep audio sound in the speaker (C) and the LED (A1) starts to blink in a blue colour. To switch off your Lazer Link press and hold the control button
(A) for a couple of seconds, until you hear a beep sound in the speaker and the LED (A1) starts to blink in a red colour and then off. CALL FUNCTIONS ANSWERING AND ENDING A CALL When there is an incoming call, the speaker will play an acoustic signal. To answer the call, you can say any word out loud into the microphone (E) (for example: Answer!) or press the control button (A) just once, or, as long as your mobile phone allows it, you can activate the automatic answering function on the mobile phone. To end the call, press the button (A) just once or wait for the caller to hang up. REJECTING AN INCOMING CALL To reject an incoming call, you just have to press the control button (A) twice when you hear a call acoustic signal. MAKING A CALL To make a call, press the control button (A) to activate the voice dialing function of the associated mobile (the mobile should be configured to allow voice dialing, as long as the mobile has this function). To make a re-call (repetition of the last dialed number), press the control button twice (A). It also depends on the mobiles functions and configuration. VOLUME ADJUSTMENTS WITH MOBILE OR NAVIGATOR (GPS) The Lazer Link device comes programmed with a volume level that allows perfect listening up to 120 km/h. Use the volume control of the associated device to adjust the volume. It is recommended to set the highest volume level of the Lazer Link with the control button (A) before the connection of the other device (see p.6 INTERCOM VOLUME ADJUSTMENT). LISTENING TO THE MOBILE'S MUSIC After connecting the Lazer Link to the mobile phone that can play music by Bluetooth, when the music is activated in the mobile it will be immediately heard through the Lazer Link device. The music and the volume can only be controlled
- 4 -
- 5 -
MEG Lazer Link bichro 135 X 80 mm DEF.indd 4-5 21/11/12 11:48 from the mobile phone depending on its functions and configuration. All of the call functions are maintained when you are listening to music. If you receive an incoming call, the music stops and when the call ends it returns. The same happens when you make a call. PAIRING IN INTeRCOm WITH ANOTHeR LAZeR LINK DeVICe Make sure that the two Lazer Links are switched off (switch off as well any Bluetooth device that could be associated to the Lazer Link, such as mobile phone, GPS, etc.). Press and keep the control button (A) of both Lazer Links pressed until the LEDs (A1) on both devices start to flash alternately in Red and Blue. Then, briefly press the control button of one of the Lazer Link devices. After a few seconds, both devices are paired and you can establish the intercommunication. When they have been associated, we recommend switching off both Lazer Links and switching on the other devices associated to each Lazer Link (GPS, mobile, etc.) then, switch the Lazer Links back on, end the activation of the Intercom function by pressing 2 seconds on the control button (A) of one of the Lazer Links. N.B.: It is important to associate each Lazer Link to its respective Bluetooth device (GPS, mobile, etc.) before the association of the two Lazer Links between themselves. When two Lazer Links are in intercommunication, the incoming call functions with the respective mobiles are maintained. If you receive an incoming call the Intercom stops and when the call ends it returns. The other device in Intercom, which is not receiving the call, will receive an acoustic warning signal. If you wish to make a call, you have to deactivate the intercom first. INTERCOM FUNCTIONS BETWEEN TWO LAZER LINK ACTIVATE AND DEACTIVATE INTERCOM When both Lazer Links are in a range of less than 10 metres from one another, switched on and paired with their respective mobiles, in order to establish the connection in Intercom, press the control button (A) of one of the devices for a couple of seconds, until you hear an acoustic signal. The intercommunication between the two Lazer Links will be activated then. To deactivate the intercommunication, press the control button (A) of one of the Lazer Links for a couple seconds. INTERCOM VOLUME ADJUSTMENT The Lazer Links allow changing their volume level when they are in Intercom. Each time you press the control button (A) the volume level changes in a cycle of three levels (low ->
medium -> high -> low...) MEG Lazer Link bichro 135 X 80 mm DEF.indd 6-7
- 6 -
PAIRING IN INTeRCOm WITH ANOTHeR DeVICe OR ANOTHeR AUDIO ReCeIVeR BLUeTOOTH DeVICe
(LAZeR BLUe OR LAZeR RINGO) Make sure that the two devices to be associated are switched off. Press and keep the control button (A) of the Lazer Link pressed until the LED (A1) starts to flash in Red and Blue. Set the other Bluetooth device in pairing mode. Then briefly press the control button (A) of the Lazer Link once. After a few seconds, both devices are paired and you can establish the intercommunication. When they have been associated, we recommend to switch off the Lazer Link and to switch on the other devices (GPS, Mobile, etc.), then turn the Lazer Link back on and activate the intercom function by pressing 2 seconds on the control button (A). When the Lazer Link is in intercommunication, the incoming call functions with your mobile are maintained. If you receive an incoming call the Intercom stops and when the call ends it returns. The other device in Intercom will receive an acoustic warning signal. If you wish to make a call with the Lazer Link you have to deactivate the Intercom first. INTERCOM FUNCTIONS WITH ANOTHER DEVICE OR ANOTHER AUDIO RECEIVER BLUETOOTH DEVICE
(LAZER BLUE OR LAZER RINGO) ACTIVATE AND DEACTIVATE INTERCOM The Lazer Link can activate or deactivate intercommunication with another Bluetooth device. To establish a connection
- 7 -
in Intercom, the two devices should be in a range of less than 10 metres from one another, switched on and paired. Then press the control button (A) on the Lazer Link for a couple of seconds until you hear an acoustic signal. The intercommunication will then be activated. To deactivate it press and keep the control button (A) of the Lazer Link pressed for a couple of seconds. INTERCOM VOLUME ADJUSTMENT The Lazer Links allow changing their volume level when they are in Intercom. Each time you press the control button (A) the volume level changes in a cycle of three levels (low ->
medium -> high -> low...). SPeCIFICATIONS Bluetooth: 2.1 Class 2 Profiles: A2DP, HSP, HPF, EDR. Battery: Lithium polymer, that will provide up to 7 hours talk time and up to 200 hours standby time (depending on configuration and use of the device). 21/11/12 11:48 CARe AND mAINTeNANCe that Lazer Link Lazer Link uses the latest technology and is manufactured to the highest quality standards. Observing the following recommendations will ensure is not inadvertently damaged.
- Do not try to open any of the system components, as the electronic parts inside may be damaged. Additionally, trying to open or modify the battery is dangerous.
- Keep your Lazer Link out of reach of children.
- Keep your Lazer Link in a dry place. Steam and humidity may damage the electronic circuits.
- Avoid extreme heat or cold. Extreme cold may cause condensation inside the components when re-warmed. Extreme heat may damage the battery, circuits or casings.
- Do not drop, hit or twist the components, as the circuits inside may be damaged.
- Do not paint or decorate the Lazer Link, as it may damage the casing or prevent the intercom from functioning correctly.
- Do not use chemicals, solvents or detergents to clean the Lazer Link as it may damage the casing. TROUBLeSHOUTING If you cannot connect the Lazer Link to your mobile phone, please check the following:
- 8 -
- Check that your Lazer Link is switched on.
- Check that your mobile phone is switched on and has the Bluetooth Function activated.
- Check that both devices are associated
- Check that the Lazer Link and the mobile phone are in a range of less than 10 meters from one another. GUARANTee CONDITIONS This guarantee is only valid upon presentation of the original purchase invoice issued by the seller to the original purchaser, and showing the date of purchase. This documentation must accompany the product to be repaired. This guarantee does not cover defects to this product which result from normal wear or improper use, including but not limited to any use in conditions other that those which are habitual and normal according to the instructions for use and maintenance as provided by Lazer Link. Nor does this guarantee extend to damage caused to the product by accidents, modification, corrosive materials, liquids, force majeure. The guarantee does not cover defects caused by the use of accessories which are not original Lazer Link parts. Tampering with any of the labels or seals on the product will invalidate the guarantee. This product is covered by a warranty in accordance with the current provision of laws. inadequate ventilation or ON OFF ANSWER CALL HANG UP CALL REJECT CALL ACTIVE VOICE DIALLING
(ACCORDING TO MOBILE) SUmmARY TABLe Keep the control button pressed until the acoustic signal is heard and the LED flashes in Blue. Keep the control button pressed until the LED flashes Red. Say any word out loud or press the control button just once. During the call, press the control button just once. Press the control button twice. Press the control button once, say the name after hearing the acoustic signal. RE-CALL (REPETITION LAST NO. DIALLED) Press the control button twice. CONNECT/START INTERCOM DISCONNECT/END INTERCOM VOLUME IN INTERCOM Press the control button for a couple of seconds until you hear an acoustic signal. Press the control button for a couple of seconds until you hear an acoustic signal. The volume in Intercom is changed pressing the control button. Each press changes the level on cycle (low-> medium->high->low) Note: In order to save battery, the device will automatically turn off in 4 minutes if it is not connected to any Bluetooth device.
- 9 -
MEG Lazer Link bichro 135 X 80 mm DEF.indd 9 21/11/12 11:48 FR BIeNVeNUe innovante spcialement conue pour Flicitations et merci davoir choisi Lazer Link, la solution mains-libres les casques LAZER et qui vous permettra une communication audio en mouvement la fois facile et sre. Le Lazer Link est un systme compatible avec tous les dispositifs Bluetooth transmetteurs audio dans les profils HSP, HFP et A2DP (Tlphone, GPS, MP3, MP4 ou tout autre dispositif compatible avec les profils susmentionns). Aussi, il peut tre associ nimporte quel dispositif rcepteur audio Bluetooth, ou un autre Lazer Link, en tablissant une communication audio (Intercommunication) jusqu une distance denviron 10 mtres, tout en maintenant la liaison avec le tlphone ou le dispositif correspondant. Un voyant lumineux LED (rouge/bleu) (A1) indique toutes les fonctions du dispositif: couplage, charge de la batterie, on/off, indicateur de batterie faible. Lazer Link ne pse quenviron 55g. Afin dobtenir la meilleure utilisation de votre Lazer Link, veuillez lire attentivement ce manuel puis le conserver dans un endroit sr pour son utilisation ultrieure ou visitez notre site http://www.lazerhelmets.com/fr/innovations-2/lazer-link
- 10 -
MEG Lazer Link bichro 135 X 80 mm DEF.indd 10-11 CHARGe De LA BATTeRIe DU LAZeR LINK Avant dutiliser Lazer Link pour la premire fois, la batterie (D) doit tre entirement charge. Branchez le chargeur (F) la prise de courant, puis insrez lautre extrmit du cble dans le port mini-USB (B) du Lazer Link. Lorsque la batterie est en charge, le tmoin lumineux est rouge (A1) ; il steindra une fois que la batterie est compltement charge. REMARqUE: Ne dbranchez jamais lappareil de la prise en tirant sur le cble. REMARqUE: Nous vous recommandons de recharger la batterie compltement chaque recharge, ceci prolongera la dure de vie de votre batterie. REMARqUE: Lorsque votre batterie est compltement charge mais na pas t utilise pendant une longue priode, elle peut avoir moins dnergie accumule que le niveau normal. Aprs quelques utilisations et recharges le niveau dnergie accumul de la batterie reviendra un niveau normal. mISe eN PLACe De LAZeR LINK Voir la vido de la mise en place du Lazer Link sur note site internet: http://www.lazerhelmets.com/fr/innovations-2/lazer-link ASSOCIATION AVeC UN TLPHONe OU UN NAVIGATeUR (GPS) Pour pouvoir utiliser le Lazer Link, celui-ci doit ncessairement tre associ au dispositif Bluetooth que lon souhaite coupler (Tlphone, GPS, etc.). Pour ce faire, lorsque le Lazer Link est teint, il faut appuyer et maintenir enfonce la touche de contrle (A) jusqu ce que la LED (A1) commence clignoter en rouge et bleu. Lors de la recherche des dispositifs Bluetooth sur le tlphone ou le navigateur, il faudra trouver le dispositif sous le nom LAZER Link . Slectionnez le dispositif LAZER Link et si ncessaire, introduisez le code daccs 0000. ALLUMER / TEINDRE Pour allumer votre Lazer Link, maintenez la touche de contrle (A) enfonce jusqu ce que vous entendiez un signal bip dans les couteurs (C)et que le voyant lumineux
(A1) commence clignoter en bleu. Pour teindre votre Lazer Link, maintenez la touche de contrle (A) enfonce pendant 3s, jusqu ce que vous entendiez le signal bip dans les couteurs, alors le voyant lumineux (A1) clignotera en rouge puis steindra. FONCTIONS DAPPeL RPONDRE ET METTRE FIN UN APPEL En cas dappel entrant, les couteurs mettent un signal sonore.
- 11 -
Pour rpondre lappel, vous pouvez dire nimporte quel mot voix haute dans le microphone (E) (par exemple :
Rpondre !), ou appuyer une seule fois sur la touche de contrle (A), ou encore, et condition bien sr que votre tlphone portable le permette, activer la fonction de rponse automatique de ce dernier. Pour mettre fin lappel, appuyez une seule fois sur la touche
(A) ou attendez que linterlocuteur raccroche. REFUSER UN APPEL ENTRANT Pour refuser un appel entrant, il vous suffit dappuyer 2 fois de suite sur la touche de contrle (A) lorsque la sonnerie de lappel retentit. RALISER UN APPEL Pour raliser un appel, appuyez sur la touche de contrle (A) pour activer la fonction de commande vocale du tlphone associ (le tlphone doit tre configur pour permettre les appels vocaux, condition bien sr que le tlphone dispose de cette fonction). Pour raliser un appel bis (rptition du dernier numro appel), appuyez 2 fois de suite sur la touche de contrle (A). Tout dpend des fonctions et de la configuration du tlphone. 21/11/12 11:48 RGLAGES DU VOLUME AVEC UN TLPHONE OU UN NAVIGATEUR (GPS) Le dispositif Lazer Link a t programm avec un niveau de volume qui permet une audition parfaite jusqu 120Km/h. Pour rgler le volume, utilisez le contrle du volume du dispositif associ. Il est conseill de rgler le volume du Lazer Link au maximum, laide de la touche de contrle
(A) avant de connecter un dispositif (voir p.13 REGLAGE DU VOLUME DINTERCOM). COUTER DE LA MUSIQUE DU TLPHONE Une fois que le Lazer Link est coupl un tlphone capable de transmettre de la musique par le biais du Bluetooth, en activant la musique sur le tlphone vous lentendrez immdiatement au travers du Lazer Link. La musique et le volume ne peuvent tre contrls que depuis le tlphone portable, et selon les fonctions et la configuration de celui-ci. Pendant lcoute de la musique, toutes les fonctions dappel sont maintenues. Si vous recevez un appel, la musique sarrte et reprend la fin de lappel. Il en va de mme si vous ralisez un appel. ASSOCIATION eN INTeRCOm AVeC UN AUTRe DISPOSITIF LAZeR LINK Assurez-vous que les deux Lazer Link soient teints (teindre galement tout autre dispositif Bluetooth qui serait associ chacun des dispositifs Lazer Link, tlphone, GPS, etc.). Appuyez sur la touche de contrle (A) des deux Lazer Link et maintenez-la enfone jusqu ce que les LED (A1) des deux dispositifs commencent clignoter en rouge et en bleu. Puis appuyez brivement sur la touche de contrle de lun des dispositifs Lazer Link. Au bout de quelques secondes, les deux dispositifs se couplent et vous pouvez communiquer. Une fois quils sont associs, il est recommand dteindre les deux Lazer Link, de rallumer les autres dispositifs associs chacun des Lazer Link (GPS, tlphone, etc.) et ensuite rallumer les deux Lazer Link ; compltez lactivation de la fonction Intercom en appuyant pendant 2 secondes sur la touche de contrle de lun des Lazer Link. N.B.: Il est impratif dassocier chaque Lazer Link son dispositif Bluetooth respectif (GPS, tlphone, etc.) avant dassocier les Lazer Link entre eux. quand deux Lazer Link sont en intercommunication, les fonctions dappel entrant avec leurs tlphones respectifs se maintiennent. Si vous recevez un appel, lIntercom sarrte et reprend lorsque vous raccrochez. Lautre dispositif en Intercom, qui ne reoit pas lappel, recevra un signal sonore davertissement. Pour raliser un appel tlphonique, vous devez dabord dsactiver lIntercom. FONCTIONS DINTERCOM ENTRE DEUX LAZER LINK ACTIVER ET DSACTIVER INTERCOM Lorsque les deux Lazer Link sont moins de 10 mtres lun de lautre, allums et coupls avec leurs tlphones respectifs, pour tablir la connexion en Intercom, appuyez pendant 2 secondes sur la touche de contrle (A) de lun des deux dispositifs jusqu ce que le signal sonore retentisse. ce moment l, lIntercommunication sactive entre les deux Lazer Link. Pour dsactiver lintercommunication appuyez pendant 2 secondes sur la touche de contrle (A) de lun des deux Lazer Link. RGLAGE DU VOLUME DINTERCOM Les Lazer Link permettent de modifier le niveau du volume lorsquils sont en Intercom. Chaque fois que vous appuyez sur la touche de contrle (A), vous modifiez le niveau du volume en un cycle de trois niveaux (faible -> Moyen -> lev
-> faible...) ASSOCIATION eN INTeRCOm AVeC UN AUTRe DISPOSITIF BLUeTOOTH RCePTeUR AUDIO
(LAZeR BLUe OU LAZeR RINGO) Assurez-vous que les deux dispositifs associer sont teints. Appuyez sur la touche de contrle (A) du Lazer Link et maintenez-la appuye jusqu ce que le LED commence clignoter en rouge et en bleu. Mettez lautre dispositif Bluetooth auquel il est coupl en mode couplage . Appuyez brivement sur la touche de contrle (A) du Lazer Link. En quelques secondes, les deux dispositifs sont coupls et vous pourrez tablir lintercommunication. Une fois quils sont associs, il est recommand dteindre le Lazer Link, rallumer les autres dispositifs (GPS, tlphone, etc.), rallumer le Lazer Link et activer la fonction Intercom en appuyant 2 secondes sur la touche de contrle (A). quand le Lazer Link est en intercommunication, les fonctions dappel entrant avec le tlphone se maintiennent. Si vous recevez un appel, lIntercom sarrte et reprend lorsque vous raccrochez. Lautre dispositif en Intercom recevra un signal sonore davertissement. Pour raliser un appel avec le Lazer Link, vous devez dabord dsactiver lIntercom. FONCTIONS DINTERCOM AVEC UN AUTRE DISPOSITIF BLUETOOTH RCEPTEUR AUDIO (LAZER BLUE OU RINGO) ACTIVER ET DSACTIVER INTERCOM Le Lazer Link peut activer ou dsactiver lintercommunication avec un autre dispositif Bluetooth. Pour tablir la connexion en Intercom, les deux dispositifs doivent se trouver moins de 10 mtres lun de lautre, allums et coupls ; appuyez alors pendant 2 secondes sur la touche de contrle (A) du Lazer Link jusqu ce quun signal sonore retentisse. ce moment l, lIntercommunication sactive. Pour la dsactiver, appuyez pendant 2 secondes sur la touche de contrle (A) du Lazer Link. RGLAGE DU VOLUME DINTERCOM Les Lazer Link permettent de modifier le niveau de leur volume lorsquils sont en Intercom. Chaque fois que vous appuyez sur la touche de contrle (A), vous modifiez le niveau du volume en un cycle de trois niveaux (faible ->
moyen -> lev -> faible...) MEG Lazer Link bichro 135 X 80 mm DEF.indd 12-13 21/11/12 11:48
- 12 -
- 13 -
CARACTRISTIQUeS Bluetooth: 2,1 Classe 2 Profils: A2DP, HSP, HPF, EDR. Batterie: Lithium polymre, qui fournira jusqu 7 heures dautonomie en conversation et jusqu 200 heures dautonomie en veille (selon la configuration et lutilisation du dispositif). eNTReTIeN Lazer Link utilise la dernire technologie et est fabriqu selon les plus hauts standards de qualit. La prise en compte des recommandations suivantes garantira que votre Lazer Link ne subira aucun dommage par inadvertance.
- Ne pas essayer douvrir le moindre composant du systme, car la partie lectronique intrieure pourrait tre endommage. De plus, essayer douvrir ou de modifier la batterie est dangereux.
- Conserver Lazer Link hors de la porte des enfants.
- Conserver Lazer Link dans un endroit sec. Lhumidit ou la vapeur pourrait endommager les circuits lectroniques.
- Eviter lexposition au froid ou la chaleur. Le froid extrme pourrait provoquer de la condensation lintrieur des composants lors de leur rchauffement. La chaleur extrme pourrait endommager la batterie, les circuits ou le botier.
- Ne pas laisser tomber, donner de coup ou plier les
- 14 -
MEG Lazer Link bichro 135 X 80 mm DEF.indd 15 composants, car les circuits lintrieur pourraient tre endommags.
- Ne pas peindre ou dcorer le Lazer Link, car cela pourrait endommager le botier ou empcher lintercommunication de fonctionner correctement.
- Ne pas utiliser dagents chimiques, de dissolvants ou dtergents pour nettoyer le Lazer Link car cela pourrait endommager le botier. DPANNAGe Si vous narrivez pas connecter le Lazer Link votre tlphone portable, vrifiez les points suivants:
- Vrifier que Lazer Link est allum.
- Vrifier que votre tlphone portable est allum et la fonction Bluetooth est active.
- Vrifier que les deux dispositifs sont associs.
- Vrifier que Lazer Link et le tlphone portable ne sont pas spars dune distance suprieure 10 mtres. ALLUM TEINT RPONDRE A UN APPEL RACCROCHER REFUSER UN APPEL ACTIVER LE MARQUAGE VOCAL
(SELON LE TLPHONE) Cette garantie ne couvre pas les dfauts de ce produit pouvant provenir dun mauvais usage, incluant mais non limit tout usage dans des conditions autres que les habituelles et normales selon les instructions dutilisation et de maintenance fournies par Lazer Link. Cette garantie ne couvre pas non plus tout dommage caus au produit par accident, liquides, ventilation modification, matriaux corrosifs, inadquate ou force majeure. Cette garantie ne couvre pas les dfauts provoqus par lutilisation daccessoires qui ne sont pas les composants originaux de Lazer Link. La garantie perdra toute validit en cas de falsification des tiquettes ou joints du produit. Ce produit est couvert par une garantie conformment la provision de lois en vigueur. TABLeAU De RSUm Maintenir la touche de contrle appuye jusqu ce quun signal sonore retentisse et que le LED clignote en bleu. Maintenir la touche de contrle appuye jusqu ce que le LED clignote en rouge. Prononcer nimporte quel mot voix haute ou appuyez une seule fois sur la touche de contrle. Pendant lappel, appuyer une seule fois sur la touche de contrle. Appuyer 2 fois de suite sur la touche de contrle. Appuyer une fois sur la touche de contrle et prononcer le nom aprs le signal sonore. CONDITIONS De LA GARANTIe APPEL BIS (RPTITION DU DERNIER N MARQU) Appuyer 2 fois de suite sur la touche de contrle. Cette garantie nest valable que sur prsentation du justificatif dachat original mis par le vendeur lacheteur original, et indiquant la date de lacquisition. Cette documentation doit obligatoirement accompagner le produit rparer. CONNECTER/DMARRER INTERCOM Appuyer sur la touche de contrle pendant 2 secondes, jusqu ce quun signal sonore retentisse. DCONNECTER/METTRE FIN INTERCOM Appuyer sur la touche de contrle pendant 2 secondes, jusqu ce quun signal sonore retentisse. VOLUME SUR INTERCOM Appuyer sur la touche de contrle pour modifier le volume sur Intercom. Chaque pulsation modifie le niveau dun cycle. (faible-> moyen-> lev-> faible) Note: Afin dconomiser la batterie, lappareil se mettra hors tension automatiquement au bout de 4 minutes sil nest connect aucun dispositif Bluetooth.
- 15 -
21/11/12 11:48 IT BeNVeNUTI Congratulazioni e grazie per aver scelto Lazer Link, linnovativo dispositivo Bluetooth concepito specificatamente per i caschi Lazer per rendere pi semplice e pi sicuro il sistema di audio comunicazione in movimento. Il Lazer Link un sistema compatibile con tutti i dispositivi audio Bluetooth per la trasmissione nei profili HSP, HFP e A2DP
(cellulare, GPS, MP3, MP4, oppure con qualsiasi dispositivo compatibile con tutte le suddette funzioni). E anche possibile associarlo (accoppiarlo) con qualsiasi dispositivo di ricezione audio Bluetooth oppure ad altri Lazer Link, stabilendo una comunicazione audio (intercomunicazione) fino a una distanza di circa 10 metri, mantenendo allo stesso tempo l'associazione con il telefono o a un dispositivo corrispondente. Tutte le funzioni di questo dispositivo sono controllate con un solo pulsante di comando (A). Un singolo LED (rosso/blu) (A1) lindicatore delle varie funzioni:
accoppiamento, ricarica della batteria, accensione /
spegnimento, indicatore del livello di carica della batteria. Lazer Link pesa solo 55 gr.ca. Per utilizzare al meglio il Vostro Lazer Link, Vi preghiamo di leggere attentamente questo manuale, di custodirlo in un luogo sicuro per poterlo usare in futuro in caso di necessit, oppure visitate il nostro sito:
http://www.lazerhelmets.com/fr/innovations-2/lazer-link
- 16 -
MEG Lazer Link bichro 135 X 80 mm DEF.indd 16-17 RICARICA DeL LAZeR LINK Prima di utilizzare il Lazer Link per la prima volta, la batteria
(D) deve essere caricata completamente. Collegate il caricatore (F) ad una presa di corrente, inserire laltra estremit del cavo nellapposito alloggiamento del Lazer Link mini-USB (B). Durante la carica della batteria il LED
(A1) rimane rosso e si spegne solo quando la carica della batteria completata. NOTA: Non scollegare mai il caricatore della batteria tirando il cavo. NOTA: Si consiglia, per una maggiore durata della vostra batteria, di effettuare sempre la ricarica completamente. NOTA: Se la batteria stata caricata completamente ma questa non viene utilizzata per un lungo periodo di tempo, pu succedere che il livello di energia sia minore rispetto al normale. Dopo essere stata scaricata e ricaricata per alcune volte, il livello di energia ritorna al livello normale. INSTALLAZIONe DeL LAZeR LINK Vedere Il video su come installare il Lazer Link sulla pagina del nostro sito web :
http://www.lazerhelmets.com/fr/innovations-2/lazer-link ACCOPPIAmeNTO CON UN TeLeFONO CeLLULARe O NAVIGATORe (GPS) Per poter utilizzare il Lazer Link necessario associarlo al dispositivo Bluetooth che si desidera accoppiare (cellulare, GPS, ecc...). Per questo, quando il Lazer Link spento, premete e tenete premuto il pulsante di comando (A) fino a quando il LED (A1) non inizia a lampeggiare alternativamente di colore rosso e blu. Cercando i dispositivi Bluetooth sul cellulare o sul navigatore, troverete il dispositivo con il nome Lazer Link . Selezionate il dispositivo Lazer Link e, se richiesto inserite il codice di accesso 0000. ACCENSIONE / SPEGNIMENTO Per accendere il vostro Lazer Link premete e tenete premuto il pulsante di comando (A) finch non sentirete un segnale acustico (beep) negli auricolari (C) e il LED (A1) inizier a lampeggiare in blu. Per spegnere il Lazer Link premete e tenete premuto pulsante di comando (A) per 2 secondi, finch non sentirete un segnale acustico (beep) negli auricolari e il LED (A1) lampegger in rosso e successivamente si spegner. FUNZIONI DI CHIAmATA Per rispondere alla chiamata possibile pronunciare una qualsiasi parola a voce alta nel microfono (C) (ad esempio:
Rispondi! ), oppure premere una sola volta il pulsante di comando (A) o ancora se il vostro telefono cellulare lo consente, possibile attivare la funzione di risposta automatica sul cellulare stesso. Per terminare la chiamata premere una sola volta il pulsante di comando (A) oppure attendere che l'interlocutore riagganci il telefono. RIFIUTARE UNA CHIAMATA IN ENTRATA Per rifiutare una chiamata in entrata sufficiente premere 2 volte di seguito il pulsante di comando (A) nel momento in cui sentite il segnale acustico di chiamata. EFFETTUARE UNA CHIAMATA Per effettuare una chiamata premere il pulsante di comando
(A) per attivare la funzione di composizione vocale del telefono associato (questo possibile solo se il telefono dotato di questa funzione, ed configurato per consentire le chiamate vocali). Per richiamare (ripetizione dell'ultimo numero composto) premere due volte di seguito il pulsante di comando (A). Anche questa funzione dipende dalle caratteristiche e dalla configurazione del vostro telefono. RISPONDERE E TERMINARE UNA CHIAMATA quando c una chiamata in arrivo, gli auricolari emetterano un segnale acustico.
- 17 -
21/11/12 11:48 REGOLAZIONE DEL VOLUME CON TELEFONO O NAVIGATORE (GPS) Il dispositivo Lazer Link gi programmato con un livello di volume che consente un ascolto perfetto fino a 120 Km/h. Per modificare il livello del volume, utilizzate il comando del volume del dispositivo associato. Si consiglia di regolare al massimo il volume del Lazer Link con laiuto del pulsante di comando (A) prima di connetterlo con un altro dispositivo (vedi p.19 REGOLAZIONE DEL VOLUME DI INTERCOMUNICAZIONE). ASCOLTARE LA MUSICA DAL TELEFONO Dopo aver collegato il Lazer Link al telefono cellulare, questo in grado di riprodurre la musica tramite Bluetooth, quando attiverete la musica nel telefono cellulare, questa si udir immediatamente attraverso il dispositivo Lazer Link. La musica e il volume si potranno controllare solo dal telefono cellulare, a seconda delle funzioni e della configurazione dello stesso. Mentre si ascolta la musica, tutte le altre funzioni di chiamata vengono mantenute. Se si riceve una chiamata, la musica si interrompe e riprende solo al termine della chiamata. Lo stesso avviene in caso siate voi ad effettuere una chiamata. ACCOPPIAmeNTO IN INTeRCOmUNICAZIONe CON UN ALTRO DISPOSITIVO LAZeR LINK ai dispositivi Lazer Link, cellulare, GPS, etc.). Premete e tenete premuto il pulsante di comando (A) di entrambi i Lazer Link fino a quando i LED (A1) di entrambi i dispositivi iniziano a lampeggiare alternativamente di colore rosso e blu. Successivamente, premere brevemente una sola volta il pulsante di comando di uno dei dispositivi Lazer Link. Dopo pochi secondi entrambi i dispositivi saranno abbinati e potrete incominciare a comunicare. Una volta associati tra loro, si consiglia di spegnere i due Lazer Link, riaccendere gli altri dispositivi associati ad ognuno dei Lazer Link (GPS, cellulare, etc.), riaccendete i due Lazer Link, terminando lattivazione della funzione intercomunicazione premendo per 2 secondi sul pulsante di controllo (A) di uno dei Lazer Link. N.B. : E importante associare ogni Lazer Link ai rispettivi dispositivi Bluetooth (GPS, cellulare, etc.) prima di associare i Lazer Link tra di loro. quando i due Lazer Link sono in fase di Intercomunicazione, le funzioni di chiamata in entrata con i rispettivi telefoni vengono mantenute. Se si riceve una chiamata, la funzione di Intercomunicazione si interrompe per riprendere al termine della chiamata. Il dispositivo di Intercomunicazione, che non ha ricevuto la chiamata, ricever un segnale acustico di avviso. Per effettuare una chiamata necessario prima disattivare l'Intercomunicazione. Assicurarsi che entrambi i Lazer Link siano spenti (spegnere anche tutti gli altri dispositivi che potrebbero essere associati
- 18 -
MEG Lazer Link bichro 135 X 80 mm DEF.indd 18-19 FUNZIONI DI INTERCOMUNICAZIONE TRA DUE LAZER LINK ATTIVARE E DISATTIVARE L'INTERCOMUNICAZIONE quando i due Lazer Link sono a meno di 10 metri l'uno dall'altro, accesi e associati ai rispettivi telefoni cellulari ; per stabilire la connessione in Intercomunicazione premete e tenete premuto per circa 2 secondi il pulsante di comando (A) di uno dei due dispositivi fino a quando non sentite un segnale acustico. Da questo momento l'intercomunicazione tra i due Lazer Link sar attiva. Per disattivare l'intercomunicazione premete e tenete premuto per circa 2 secondi il pulsante di comando (A) di uno qualsiasi dei dispositivi Lazer Link. REGOLAZIONE DEL VOLUME DI INTERCOMUNICAZIONE I Lazer Link consentono di cambiare il livello del volume quando sono in fase di Intercomunicazione. Ogni volta che premete il pulsante di comando (A) il livello del volume cambia in successione su tre livelli (basso -> medio -> alto
-> basso ->...) ACCOPPIAmeNTO IN INTeRCOmUNICAZIONe CON UN ALTRO DISPOSITIVO BLUeTOOTH PeR LA RICeZIONe AUDIO
(LAZeR BLUe O LAZeR RINGO) Assicurarsi che i due dispositivi da associare siano spenti. Premete e tenete premuto il pulsante di comando (A) del Lazer Link fino a quando il LED (A1) non inizia a lampeggiare alternativamente di colore rosso e blu. Predisporre l'altro
- 19 -
dispositivo Bluetooth in modalit di accoppiamento. Premere brevemente una volta il pulsante di comando (A) del Lazer Link. Dopo pochi secondi entrambi i dispositivi saranno accoppiati, potrete stabilire l'intercomunicazione. Una volta associati i dispo-sitivi, vi raccomandiamo di spegnere il Lazer Link, riaccendere gli altri dispositivi (cellulare, GPS, etc.), e doppo riaccendere il Lazer Link e attivare la funzione Intercomunicazione spingendo per 2 secondi sul pulsante di comando (A). quando il Lazer Link in funzione di intercomunicazione, le funzioni di chiamata in entrata con il vostro telefono vengono mantenute. Se si riceve una chiamata, l'intercomunicazione si interrompe per riprendere al termine della chiamata. L'altro dispositivo in Intercomunicazione ricever un avviso tramite un segnale acustico. Per effettuare una chiamata con il Lazer Link necessario prima disattivare l'Intercomunicazione. FUNZIONI DI INTERCOMUNICAZIONE CON UN ALTRO DISPOSITIVO BLUETOOTH PER LA RICEZIONE AUDIO (LAZER BLUE O LAZER RINGO) ATTIVARE E DISATTIVARE L'INTERCOMUNICAZIONE Il Lazer Link pu attivare o disattivare l'intercomunicazione con un altro dispositivo Bluetooth. Per stabilire la connessione in Intercomunicazione, entrambi i dispositivi devono essere a meno di 10 metri l'uno dall'altro, accesi e abbinati; a questo punto, tenete premuto per circa 2 secondi il pulsante di comando (A) del Lazer Link fino a quando non 21/11/12 11:48 sentite un segnale acustico. In questo momento si attiva l'intercomunicazione. Per disattivarla premete e tenete premuto per circa 2 secondi il pulsante di comando (A) del Lazer Link. REGOLAZIONE DEL VOLUME DI INTERCOMUNICAZIONE I Lazer Link consentono di cambiare il livello del volume quando sono in funzione Intercomunicazione. Ogni volta che si preme il pulsante di comando (A) cambia il livello del volume in un ciclo successivo di tre livelli (basso -> medio ->
alto -> basso ->...) SPeCIFICHe TeCNICHe Bluetooth: 2,1 Classe 2 Profili: A2DP, HSP, HPF, EDR. Batteria: polimeri di litio, in grado di fornire fino a 7 ore di conversazione e fino a 200 ore in standby (a secondo della configurazione e utilizzo del dispositivo). CURA e mANUTeNZIONe Lazer Link utilizza le pi recenti tecnologie ed realizzato secondo i pi elevati standard qualitativi. Losservanza delle raccomandazioni di seguito riportate garantir che il vostro Lazer Link non sia inavvertitamente danneggiato.
- Non cercare di aprire uno qualsiaisi dei componenti del sistema, in quanto le parti elettroniche allinterno potrebbero venire danneggiate. Inoltre, tentare di aprire o modificare la batteria potrebbe risultare pericoloso.
- Tenete il vostro Lazer Link fuori dalla portata dei bambini.
- Tenete il vostro Lazer Link in un luogo asciutto. Vapore o umidit potrebbero danneggiare i circuiti elettronici.
- Evitare condizioni di caldo o freddo estremi. Il freddo intenso pu portare alla formazione di condensa all interno dei componenti quando il dispositivo ritorna alla sua normale temperatura. Temperature troppo elevate possono provocare danni alla batteria, ai circuiti e alle parti in plastica.
- Non fare cadere, battere o scuotere il dispositivo poich i circuiti interni e i meccanismi del dispositivo potrebbero subire danni.
- Non dipingere o decorare il Lazer Link dal momento che ci potrebbe danneggiare le parti esterne in plastica e impedire che il dispositivo di intercomunicazione funzioni correttamente.
- Non usare prodotti chimici, solventi o detergenti per pulire il Lazer Link, questi prodotti potrebbero danneggiare le parti esterne. RISOLUZIONe DI PROBLemI CONDIZIONI DI GARANZIA Se non riuscite a connettere il Lazer Link al Vostro telefono cellulare, verificate quanto segue :
- Controllate che il Lazer Link sia acceso, che abbia la batteria carica, e collegato al dispositivo Bluetooth del Vostro cellulare.
- Controllate che Il vostro cellulare sia acceso e che la funzionalit Bluetooth sia attivata.
- Controllate che Il cellulare e il Lazer Link siano collegati e che non siano a pi di 10 metri di distanza tra loro. La presente garanzia valida soltanto presentando lo scontrino originale con il nome del rivenditore e la data dellacquisto. Tale documentazione deve accompagnare il prodotto da riparare. La garanzia non copre i difetti dovuti allusura o alluso improprio del dispositivo, incluse ma non limitate alluso in altre condizioni non abituali e normali come previsto dalle istruzioni duso e manutenzioni fornite da Lazer Link. Inoltre, questa garanzia non si estende ai danni arrecati al dispositivo da incidenti, modifiche, utilizzo di materiali corrosivi, liquidi, ventilazione inadeguata e forze maggiori. La garanzia non copre i difetti causati dalluso di accessori non originali Lazer Link. La manomissione dei sigilli e delle etichette del prodotto invalider la garanzia. questo prodotto coperto da garanzia in conformit con le disposizioni delle vigenti leggi. MEG Lazer Link bichro 135 X 80 mm DEF.indd 21 21/11/12 11:48
- 20 -
- 21 -
TABeLLA RIASSUNTIVA D ACCENSIONE SPEGNIMENTO Tenere premuto il pulsante di comando fino a che non si sente un segnale acustico e il LED lampeggia di colore blu. Tenere premuto il pulsante di comando fino a che il LED non lampeggia di colore rosso. RISPONDERE ALLA CHIAMATA Pronunciare ad alta voce una parola qualsiasi o premere una sola volta il pulsante di comando. RIAGGANCIARE Durante la chiamata, premere una sola volta il pulsante di comando. RIFIUTARE LA CHIAMATA Premere 2 volte di seguito il pulsante di comando. ATTIVARE LA COMPOSIZIONE VO-
CALE (A SECONDA DEL TELEFONO) Premere una volta il pulsante di comando, pronunciare il nome dopo il segnale acustico. RICHIAMARE (RIPETIZIONE ULTIMO NUMERO COMPOSTO) Premere 2 volte di seguito il pulsante di comando. CONNETTERE/AVVIARE INTERCOM Premere il pulsante di comando per circa 2 secondi fino a che non si sente un segnale acustico. SCOLLEGARE/TERMINARE INTERCOM Premere il pulsante di comando per circa 2 secondi fino a che non si sente un segnale acustico. VOLUME IN INTERCOM Premendo il pulsante di controllo si cambia il volume in Intercom. Ogni volta che si preme, si cambia il livello a rotazione (basso-> medio->alto->basso...) Nota: Per risparmiare la batteria, il dispositivo si spegner automaticamente dopo 4 minuti se non sar collegato con qualsiasi altro dispositivo Bluettooh. WILLKOmmeN Ihnen unterwegs Wir beglckwnschen Sie zur Wahl des Lazer Link und mchten uns bei Ihnen fr den Kauf dieses innovativen, speziell fr Lazer Helme entwickelten Bluetooth Systems bedanken; es erlaubt jederzeit eine einfache und sichere Kommunikation. Das Lazer Link System ist mit allen Bluetooth-fhigen Audiobertragungsgerten mit HSP, HFP und A2DP-Profil kompatibel (Telefon, GPS-, MP3-, MP4-Gert, usw. oder ein anderes Gert mit allen genannten Funktionen). Auerdem kann es mit jedem Bluetooth-
fhigen Audioempfangsgert oder anderen Lazer Link System gepaart werden, um eine Audio- (Gegensprech-) Kommunikation bis zu einer Entfernung von etwa 10 Metern herzustellen, whrend die Verbindung zum Telefon bzw. zum verbundenen Gert aufrecht erhalten wird. Dieses System wird mit nur einem Bedienknopf gesteuert (A). Eine einzige, blau/rote LED (A1) zeigt folgende Betriebszustnde an: Verbindungsherstellung, Laden, An/Aus, niedrige Batterie-Ladung. Je nach Ausfhrung, wiegt das Lazer Link nur ca. 55g. Um die bestmgliche Funktion Ihres Lazer Link zu gewhrleisten, lesen Sie diese Bedienungsanleitung bitte aufmerksam durch und bewahren sie sorgfltig auf oder besuchen Sie unsere Website http://www.lazerhelmets.com/fr/innovations-2/lazer-link Sie AUFLADeN DeS LAZeR LINK Bevor Sie das Lazer Link erstmalig in Betrieb nehmen, muss die Batterie (D) vollstndig aufgeladen sein. Stecken Sie das Netzteil des Ladekabels (F) dafr in eine Steckdose und verbinden das andere Ende mit dem Mini-USB-Anschluss des Lazer Link (B). Whrend des Ladevorgangs leuchtet die LED
(A1) rot, sobald der Akku geladen ist erlischt die LED. HINWEIS: Ziehen sie niemals am Kabel, wenn Sie das Netzteil ausstecken. HINWEIS: Warten Sie ab bis der Ladevorgang vollstndig abgeschlossen ist, das verlngert die Lebensdauer und die Betriebsdauer des Akkus. HINWEIS: Wenn das Lazer Link lnger nicht in Betrieb genommen wurde, kann die Betriebsdauer, auch nach voller Ladung, kurzfristig verkrzt sein. Sobald das System mehrfach genutzt und wieder geladen wurde, wird die volle Betriebsdauer wieder hergestellt. eINBAU DeS LAZeR LINK Schauen Sie das Video Wie installiere ich das Lazer Link auf unserer Website :
http://www.lazerhelmets.com/fr/innovations-2/lazer-link MEG Lazer Link bichro 135 X 80 mm DEF.indd 22-23 21/11/12 11:48
- 22 -
- 23 -
PAARUNG mIT eINem TeLeFON ODeR NAVIGATIONSGeRT (GPS) Um das Lazer Link nutzen zu knnen, muss es zunchst mit dem Bluetooth-fhigen Gert
(Mobiltelefon, GPS-Gert, ...), mit dem eine Verbindung hergestellt werden soll, gepaart werden. Drcken Sie dazu bei ausgeschaltetem Lazer Link die Steuertaste (A) und halten Sie sie gedrckt, bis das LED-Lmpchen (A1) abwechselnd in rot und blau zu blinken beginnt. Beim Paarungsvorgang am Telefon bzw. Navigationsgert werden Sie unser Gert unter der Bezeichnung Lazer Link finden. Whlen Sie das Gert Lazer Link aus und geben Sie, falls erforderlich, den Zugriffscode 0000 ein. EIN- UND AUSSCHALT-FUNKTION Um das Lazer Link einzuschalten, drcken und halten Sie den Bedienknopf (A) so lang bis Sie einen Piep-Ton hren und die LED (A1) blau zu blinken beginnt. Um das Lazer Link abzuschalten, drcken und halten Sie den Bedienknopf (A) so lang bis Sie einen Piep-Ton hren und die LED (A1) beginnt rot statt blau zu blinken. ANRUFFUNKTIONeN EINEN ANRUF ANNEHMEN UND BEENDEN Geht ein Anruf ein, gibt der Lautsprecher (C) ein akustisches Signal ab.
- 24 -
Um das Gesprch anzunehmen, knnen Sie laut ein beliebiges Wort ins Mikrofon (E) sprechen (zum Beispiel:
Annehmen!) oder einmal die Steuertaste (A) bettigen. Wenn Ihr Mobiltelefon ber eine Funktion zur automatischen Anrufannahme verfgt, knnen Sie auch diese aktivieren. Um das Gesprch zu beenden, drcken Sie einmal die Steuertaste (A) oder warten, bis Ihr Gesprchspartner aufgelegt hat. ANRUFANNAHME VERWEIGERN Um einen Anruf zu verweigern, drcken Sie einfach 2 Mal hintereinander die Steuertaste (A), sobald Sie das akustische Anrufsignal hren. EIN TELEFONAT FHREN Um einen Anruf zu ttigen, drcken Sie die Steuertaste (A) und aktivieren auf diese Weise die Stimmwahl des verbundenen Telefons (das Telefon muss ber die entsprechende Funktion verfgen und so konfiguriert sein, dass Anrufe per Stimmwahl zugelassen sind). Zur Wahlwiederholung (wiederholte Wahl der zuletzt gewhlten Rufnummer) drcken Sie zweimal hintereinander die Steuertaste (A). (Ist von den Funktionen und der Konfiguration des Telefons abhngig.) ANPASSEN DER LAUTSTRKE VON TELEFON ODER NAVIGATIONSGERT (GPS) Das Lazer Link ist so vorprogrammiert, dass Sie bis zu 120 km/h ein perfektes Klangerlebnis genieen knnen. Um die Lautstrke anzupassen, nutzen Sie den Lautstrkeregler des verbundenen Gerts (Sie p. 26 ANPASSEN DER LAUTSTRKE DER GEGENSPRECHFUNKTION). MUSIK VOM TELEFON ANHREN Nach dem Paaren des Lazer Link mit einem Telefon, das Musik per Bluetooth bertragen kann, und dem Aktivieren der Musikfunktion am Telefon, wird die Musik sofort ber das Lazer Link ausgegeben. Musik und Lautstrke knnen, je nach Funktionen und Konfiguration des Telefons, nur ber das Mobiltelefon gesteuert werden. Whrend die Musik abgespielt wird, bleiben alle Anruffunktionen aktiv. Geht ein Anruf ein, wird die Musik pausiert und nach Beendigung des Gesprchs wieder abgespielt. Gleiches gilt fr das Durchfhren eines Telefonats. PAARUNG mIT LAZeR LINK GeRT ALS GeGeNSPReCHANLAGe Vergewissern Sie sich, dass beide Lazer Link ausgeschaltet sind (ebenfalls alle weiteren mit einem Lazer Link verbundenen Bluetooth Gerte, wie Handy, Navi...). Drcken Sie die Steuertaste (A) beider Lazer Link und halten Sie sie gedrckt, bis die LED-Lmpchen (A1) der Gerte rot und blau zu blinken beginnen. Drcken Sie anschlieend einmal kurz auf die Steuertaste eines der Lazer Link Gerte. Es dauert nun einige Sekunden, bis sich beide Gerte gepaart und die Gegensprechverbindung hergestellt haben. Nachdem die Gerte die Verbindung hergestellt haben,
- 25 -
Lazer sollten Sie beide Lazer Link Gerte noch einmal aus und wieder eingeschalten, um eine korrekte Funktion der jeweiligen Telefone und der Gegensprechfunktion zu gewhrleisten. Whrend beide Link Gerte untereinander kommunizieren, bleiben die Anruffunktionen in Verbindung mit den jeweiligen Telefonen erhalten. Geht ein Anruf ein, wird die Gegensprechfunktion pausiert und nach Beendigung des Gesprchs fortgesetzt. Das andere Gert im Gegensprechmodus, das keinen Anruf erhalten hat, empfngt ein akustisches Warnsignal. Um einen Anruf zu ttigen, muss die Gegensprechfunktion zunchst deaktiviert werden. FUNKTIONEN BEI NUTZUNG VON ZWEI LAZER LINK MIT GEGENSPRECHFUNKTION AKTIVIEREN UND DEAKTIVIEREN DER GEGENSPRECHFUNKTION Positionieren Sie die beiden Lazer Link Gerte in einer Entfernung von weniger als 10 m voneinander und schalten Sie die Gerte sowie die jeweiligen Telefone ein. Um die Gegensprechverbindung aufzubauen, drcken Sie etwa 2 Sekunden lang die Steuertaste (A) eines der Gerte, bis Sie ein akustisches Signal hren. In diesem Augenblick wurde die Gegensprechfunktion zwischen den beiden Lazer Link aktiviert. Um die Gegensprechfunktion zu deaktivieren, drcken Sie etwa 2 Sekunden lang die Steuertaste (A) eines der beiden Lazer Link Gerte. MEG Lazer Link bichro 135 X 80 mm DEF.indd 24-25 21/11/12 11:48 ANPASSEN DER LAUTSTRKE DER GEGENSPRECHFUNKTION Sie knnen die Lautstrke der Lazer Link Gerte ndern, whrend die Gegensprechfunktion aktiviert ist. Mit jedem Druck auf die Steuertaste (A) ndert sich das Lautstrkeniveau in einem Dreierzyklus (niedrig -> mittel -> hoch -> niedrig ->) PAARUNG IN GeGeNSPReCHFUNKTION mIT eINem ANDeReN BLUeTOOTH-FHIGeN AUDIOemPFNGeR
(LAZeR BLUe / LAZeR RINGO) Vergewissern Sie sich, dass die zu paarenden Gerte ausgeschaltet sind. Drcken Sie die Steuertaste (A) am Lazer Link und halten Sie sie gedrckt, bis das LED-Lmpchen rot und blau zu blinken beginnt. Aktivieren Sie am anderen Bluetooth-fhigen Gert die Paarung. Drcken Sie einmal kurz auf die Steuertaste (A) des Lazer Link. Es dauert nun einige Sekunden, bis sich beide Gerte paaren und die Gegensprechverbindung herstellen. Nachdem die Gerte die Verbindung hergestellt haben, sollten Sie das Lazer Link noch einmal aus- und wieder einschalten, um eine korrekte Funktion des verbundenen Telefons und der Gegensprechfunktion zu gewhrleisten. Whrend das Lazer Link im Gegensprechmodus kommuniziert, bleiben die Anruffunktionen ber das verbundene Telefon erhalten. Geht ein Anruf ein, wird die Gegensprechfunktion pausiert und nach Beendigung des Gesprchs fortgesetzt. Das andere Gert mit Gegensprechfunktion empfngt ein akustisches Warnsignal. Um einen Anruf mit dem Lazer Link zu ttigen, muss die Gegensprechfunktion zunchst deaktiviert werden. FUNKTIONEN BEI DER NUTZUNG ALS GEGENSPRECHANLAGE MIT EINEM ANDEREN BLUETOOTH-FHIGEN AUDIOEMPFNGER
(LAZER BLUE / LAZER RINGO) AKTIVIEREN UND DEAKTIVIEREN DER GEGENSPRECHFUNKTION Das Lazer Link kann die Gegensprechfunktion mit einem anderen Bluetooth-fhigen Gert aktivieren bzw. deaktivieren. Um die Verbindung als Gegensprechanlage herstellen zu knnen, mssen sich beide Gerte in einer Entfernung von hchstens 10 m voneinander befinden, eingeschaltet und gepaart sein. Drcken Sie dann etwa 2 Sekunden lang die Steuertaste (A) des Lazer Link, bis Sie ein akustisches Signal hren. In diesem Moment wird die Gegensprechfunktion aktiviert. Um die Gegensprechfunktion zu deaktivieren, drcken Sie etwa 2 Sekunden lang die Steuertaste (A) des Lazer Link. ANPASSEN DER LAUTSTRKE DER GEGENSPRECHFUNKTION Sie knnen die Lautstrke der Lazer Link Gerte ndern, whrend die Gegensprechfunktion aktiviert ist. Mit jedem Druck auf die Steuertaste (A) ndert sich das Lautstrkeniveau in einem Dreierzyklus (niedrig -> mittel ->
hoch -> niedrig -> ) TeCHNISCHe DATeN Bluetooth: 2.1 Klasse 2 Profile: A2DP, HSP, HPF, EDR. Batterietyp:
Gesprchsdauer, bis zu 200 Stunden Stand-By-Modus. Polymer, bis Lithium zu 7 Stunden ReINIGUNG UND PFLeGe Das Lazer Link verwendet aktuellste Technologie und gengt hchsten qualittsstandards. Bitte beachten Sie die folgenden Hinweise, um Beschdigungen durch Unachtsamkeit zu vermeiden.
- ffnen Sie keines der Gehuse, die elektronischen Komponenten knnten beschdigt werden. Die Entfernung oder Manipulation der Batterie ist gefhrlich.
- Das Lazer Link ist kein Kinderspielzeug.
- Bewahren Sie das Lazer Link trocken auf. Nsse oder Feuchtigkeit knnen die elektronischen Komponenten beschdigen.
- Vermeiden Sie extreme Hitze oder Klte. Der Wechsel von extremer Klte zu Wrme kann zu Kondensation innerhalb der Komponenten fhren. Extreme Wrme kann zu Beschdigungen der Batterie oder des Gehuses fhren.
- Ein Aufprall, Ste oder Verwindungen des Gehuses knnen die internen Komponenten beschdigen.
- Eine Lackierung oder Aufkleber knnen das Gehuse beschdigen oder die Intercom-Funktion beeintrchtgen.
- Benutzen Sie zur Reinigung keine Chemikalien, Lsungs-
oder Reinigungsmittel, diese knnen das Gehuse beschdigen. FeHLeRBeHeBUNG Wenn Sie keine Verbindung mit einem anderen Bluetooth-
Gert herstellen knnen, gehen sie bitte folgendermaen vor:
- Stellen Sie sicher, dass das Lazer Link eingeschaltet ist.
- Stellen Sie sicher, dass das Lazer Link geladen und mit dem anderen Blutooth -Gert verbunden ist.
- Stellen Sie sicher, dass das andere Bluetooth-Gert angeschaltet und die Bluetooth-Funktion aktiviert ist.
- Stellen Sie sicher, dass das Bluetooth-Gert und das Lazer Link nicht mehr als 10 Meter voneinander entfernt sind. GARANTIeBeSTImmUNGeN Diese Garantie ist nur gltig bei Vorlage des Original-
Kaufbelegs. Der Beleg muss dem zu reparierenden Gert beigefgt sein. Diese Garantie deckt keine Schden ab, die durch unsachgeme Behandlung hervorgerufen wurden, eingeschlossen, aber nicht beschrnkt auf, jeglichen Betrieb unter Bedingungen, die MEG Lazer Link bichro 135 X 80 mm DEF.indd 26-27 21/11/12 11:48
- 26 -
- 27 -
dem normalen Gebrauch, wie in dieser Bedienungsanleitung und den Pflegehinweisen beschrieben, nicht entsprechen. Die Garantie gilt nicht fr jede Art von Beschdigung des Gerts welche durch Unfall, Modifikationen, tzende Stoffe, Flssigkeiten, unzureichende Belftung oder hhere Gewalt verursacht wurde. Diese Garantie deckt keine Schden ab, die durch die Verwendung von nicht-originalem Zubehr verursacht wurden. Das Entfernen oder Manipulieren von, auf dem Gert befindlichen Aufklebern fhrt zum Erlschen der Garantie. Die Gewhrleistung entspricht den jeweiligen gesetzlichen Bestimmungen. eS BIeNVeNIDO EINSCHALTEN AUSSCHALTEN ANRUF ANNEHMEN ANRUF BEENDEN ANRUF ABLEHNEN ZUSAmmeNFASSUNGSTABeLLe Steuertaste drcken, bis ein akustisches Signal zu hren ist und das LED-Lmpchen blau blinkt. Steuertaste drcken, bis das LED-Lmpchen rot blinkt. Laut ein beliebiges Wort sagen oder einmal die Steuertaste bettigen. Whrend des Gesprchs einmal die Steuertaste drcken. 2 Mal hintereinander die Steuertaste bettigen. STIMMWAHL AKTIVIEREN (JE NACH TELEFON) Einmal die Steuertaste drcken und nach Ertnen des akustischen Signals den Namen sagen. WAHLWIEDERHOLUNG (WIEDERHOLTE WAHL DER ZULETZT GEWHLTEN NR.) 2 Mal hintereinander die Steuertaste bettigen. GEGENSPRECHFUNKTION AKTIVIEREN/STARTEN Steuertaste etwa 2 Sekunden lang gedrckt halten, bis ein akustisches Signal zu hren ist. GEGENSPRECHANLAGE DEAKTIVIEREN/BEENDEN Steuertaste etwa 2 Sekunden lang gedrckt halten, bis ein akustisches Signal zu hren ist. LAUTSTRKE IN GEGENSPRECHFUNKTION Steuertaste drcken, um die Lautstrke der Gegensprechfunktion zu ndern. Mit jedem Tasten-
druck ndert sich das Lautstrkeniveau in einem Dreierzyklus
(niedrig->mittel->hoch->niedrig) Anmerkung: Um Batterie zu sparen, wird nach 4 Minuten die Anlage sich automatisch ausschalten, wenn es nicht mit einem Bluetooth Gert verbunden ist.
- 28 -
Enhorabuena y gracias por haber adquirido un dispositivo Lazer Link, el sistema Bluetooth diseado especialmente para cascos para permitir una fcil y segura comunicacin de audio en movimiento. El Lazer Link es un sistema compatible con todos los dispositivos Bluetooth transmisores de audio en los perfiles HSP, HFP y A2DP (Mvil, GPS, MP3, MP4, o un solo dispositivo con todas las funciones citadas). As mismo, puede asociarse con cualquier dispositivo receptor de audio Bluetooth o a otro Lazer Link, estableciendo una comunicacin de audio
(Intercomunicacin) hasta una distancia aproximada de 10 metros, manteniendo a su vez la asociacin con el telfono o dispositivo correspondiente. El dispositivo se puede operar fcilmente con un solo botn de control (A). Un solo LED Rojo/Azul (A1) sirve como indicador de funcionamiento, asociacin, carga de batera e indicador de batera baja. El dispositivo Lazer Link slo pesa unos 55gr. Para una mejor utilizacin del dispositivo Lazer Link, por favor lea este manual y luego gurdelo en lugar seguro en caso de necesitar usarlo de nuevo o visite:
http://www.lazerhelmets.com/fr/innovations-2/lazer-link
- 29 -
CARGA DeL LAZeR LINK Antes de utilizar el dispositivo Lazer Link por primera vez, deber efectuar una carga completa del dispositivo. Enchufe el cargador (F) a la red y luego conecte el terminal del mismo a la ranura preparada para ello (puerto mini-USB)
(B). Durante la carga se enciende el LED rojo (A1) y cuando la carga se completa el LED (A1) se apaga. NOTA: Nunca tire de los cables para desconectar el cargador. NOTA: Con el paso del tiempo las bateras (D) pierden su carga, por eso es importante realizar cargas completas de la batera antes de usar el dispositivo. NOTA: Aunque la batera se haya cargado totalmente pero no haya usado el dispositivo durante mucho tiempo, ste podra tener un nivel de carga inferior a lo normal. Despus de algunas utilizaciones y cargas, el nivel de energa acumulado de la batera volver a un nivel normal. INSTALACIN LAZeR LINK Vase el video de instalacin del Lazer Link en nuestra pgina web :
http://www.lazerhelmets.com/fr/innovations-2/lazer-link MEG Lazer Link bichro 135 X 80 mm DEF.indd 28-29 21/11/12 11:48 ASOCIACIN CON UN TeLFONO O NAVeGADOR (GPS) Para poder utilizar el Lazer Link es necesaria la asociacin del mismo al dispositivo Bluetooth que se quiera emparejar
(Mvil, GPS, etc.). Para ello, cuando el Lazer Link est apagado, pulsar y mantener pulsado el botn de control (A) hasta que el LED (A1) empieza a parpadear alternativamente en Rojo y Azul. Al buscar dispositivos Bluetooth en el telfono o navegador, debern encontrar el dispositivo bajo el nombre Lazer Link . Seleccionar el dispositivo Lazer Link y en caso necesario introducir la clave de acceso 0000. ENCENDIDO Y APAGADO Para encender el dispositivo Lazer Link mantener presionado unos segundos el botn de control (A) hasta que el altavoz emita una seal acstica y el LED (A1) parpadee en color Azul. Para apagar el Lazer Link mantener presionado el botn de control (A) hasta que el LED efecte un parpadeo en color Rojo antes de apagarse el dispositivo definitivamente. FUNCIONeS De LLAmADA RESPONDER Y TERMINAR UNA LLAMADA Cuando hay una llamada entrante, el altavoz (C) emitir una seal acstica. Para responder a la llamada puede decir al micrfono (E) cualquier palabra en voz alta (por ejemplo: Contestar! ), o pulsar una sola vez el botn de control (A), o bien, siempre que su telfono mvil lo permita, puede activar la funcin de respuesta automtica en el telfono mvil. Para terminar la llamada presionar una sola vez el botn (A) o esperar a que el interlocutor cuelgue la llamada. RECHAZAR UNA LLAMADA ENTRANTE Para rechazar una llamada entrante solo tiene que presionar 2 veces seguidas el botn de control (A) en el momento que se oye una seal acstica de llamada. REALIZAR UNA LLAMADA Para realizar una llamada pulsar el botn de control (A) para activar la funcin de marcacin por voz del telfono asociado (el telfono debe estar configurado para permitir llamadas vocales, siempre y cuando el telfono tenga esta funcin). Para efectuar una re-llamada (repeticin del ltimo nmero marcado) pulse dos veces seguidas el botn de control (A). Depende de las funciones y configuracin del telfono. AJUSTE DEL VOLUMEN CON TELFONO O NAVEGADOR (GPS) El dispositivo Lazer Link viene programado con un nivel de volumen que permite una perfecta audicin hasta 120Km/h. Para ajustar el volumen, utilizar el control de volumen del dispositivo asociado. Se aconseja ajustar al mximo el volumen del Lazer Link con el botn de control (A) antes de conectar el dispositivo (Vase p.32 AJUSTE DEL VOLUMEN DE INTERCOM ). ESCUCHANDO MSICA DEL TELFONO Una vez el Lazer Link est emparejado con un telfono capaz de emitir msica por Bluetooth, si se activa la msica en el telfono, se oir inmediatamente a travs del dispositivo Lazer Link. La msica y el volumen solo se pueden controlar desde el telfono mvil dependiendo de las funciones y configuracin del mismo. Mientras se escucha msica todas las funciones de llamada se mantienen. En caso de recibir una llamada entrante, la msica se detiene y al finalizar la llamada vuelve la msica. Lo mismo en el caso de realizar una llamada. ASOCIACIN eN INTeRCOm CON OTRO DISPOSITIVO LAZeR LINK Asegurarse que ambos Lazer Link estn apagados (apagar tambien los dispositivos que estuvieran asociados a cualquier dispositivo Lazer Link, mvil, GPS, etc.). Pulsar y mantener pulsado el botn de control (A) de ambos Lazer Link hasta que los LED de ambos dispositivos empiezan a parpadear alternativamente en Rojo y Azul. Acto seguido, pulsar brevemente una vez el botn de control de uno de los dispositivos Lazer Link. En unos segundos ambos dispositivos se emparejarn y se podr establecer la intercomunicacin. Una vez asociados entre ellos, se recomienda apagar ambos Lazer Link, volver a encender los otros dispositivos asociados con cada uno de los Lazer Link (GPS, mvil, etc.) y despus volver a encender ambos Lazer Link, completar la activacin de la funcin Intercom pulsando unos 2 segundos en el botn de control (A) de cualquiera de los Lazer Link. N.B. : es imprescindible asociar cada Lazer Link a su respectivo dispositivo Bluetooth (GPS, mvil, etc.) antes de asociar los Lazer Link entre ellos. Mientras dos Lazer Link estn en intercomunicacin las funciones de llamada entrante con sus respectivos telfonos se mantienen. En caso de recibir una llamada entrante, el Intercom se detiene y al finalizar la llamada vuelve el Intercom. El otro dispositivo en Intercom, que no est recibiendo la llamada, recibir una seal acstica de advertencia. Para realizar una llamada primero hay que desactivar el Intercom. FUNCIONES DE INTERCOM ENTRE DOS LAZER LINK ACTIVAR Y DESACTIVAR INTERCOM Teniendo los dos Lazer Link a menos de 10 metros uno del otro, encendidos y emparejados con sus respectivos telfonos, para establecer la conexin en Intercom pulsar y mantener pulsado unos 2 segundos el botn de control (A), de uno de los dos dispositivos, hasta que se oye una seal
- 30 -
- 31 -
MEG Lazer Link bichro 135 X 80 mm DEF.indd 30-31 21/11/12 11:48 acstica. En ese momento se activar la Intercomunicacin entre los dos Lazer Link. Para desactivar la intercomunicacin pulsar y mantener pulsado unos 2 segundos el botn de control (A) de cualquiera de los Lazer Link. AJUSTE DEL VOLUMEN DE INTERCOM Los Lazer Link permiten cambiar su nivel de volumen cuando estn en Intercom. Cada vez que se pulsa el botn de control
(A) se cambia el nivel de volumen en un ciclo de tres niveles
(bajo -> medio -> alto -> bajo ->). ASOCIACIN eN INTeRCOm CON OTRO DISPOSITIVO ReCePTOR De AUDIO
(LAZeR BLUe O LAZeR RINGO) Asegurarse que los dos dispositivos a asociar estn apagados. Pulsar y mantener pulsado el botn de control
(A) del Lazer Link hasta que el LED empieza a parpadear alternativamente en Rojo y Azul. Poner el otro dispositivo Bluetooth al cual est asociado en modo emparejamiento
. Pulsar brevemente una vez el botn de control (A) del Lazer Link. En unos segundos ambos dispositivos se emparejarn y se podr establecer la intercomunicacin. Una vez asociados, se recomienda apagar el Lazer Link, volver a encender los otros dispositivos (GPS, mvil, etc.), volver a encender el Lazer Link y activar la funcin Intercom pulsando unos 2 segundos en el botn de control (A). Mientras el Lazer Link est en intercomunicacin, las funciones de telfono se llamada entrante con su mantienen. En caso de recibir una llamada entrante, el Intercom se detiene y al finalizar la llamada vuelve el Intercom. El otro dispositivo en Intercom recibir una seal acstica de advertencia. Para realizar una llamada con el Lazer Link primero hay que desactivar el Intercom. FUNCIONES DE INTERCOM CON OTRO DISPOSITIVO BLUETOOTH RECEPTOR DE AUDIO
(LAZER BLUE O LAZER RINGO) ACTIVAR Y DESACTIVAR INTERCOM El Lazer Link puede activar o desactivar la intercomunicacin con otro dispositivo Bluetooth. Para establecer la conexin en Intercom, ambos dispositivos deben estar a menos de 10 metros uno del otro, encendidos y emparejados, entonces mantener pulsado unos 2 segundos el botn de control
(A) del Lazer Link hasta que se oye una seal acstica. En ese momento se activar la intercomunicacin. Para desactivarla pulsar y mantener pulsado unos 2 segundos el botn de control (A) del Lazer Link. AJUSTE DEL VOLUMEN DE INTERCOM Los Lazer Link permiten cambiar su nivel de volumen cuando estn en Intercom. Cada vez que se pulsa el botn de control (A) se cambia el nivel de volumen en un ciclo de tres niveles (bajo -> medio -> alto -> bajo) eSPeCIFICACIONeS TCNICAS Bluetooth: 2.1 Clase 2. Perfiles: A2DP, HSP, HFP, EDR. Batera: Polmero Litio que permite hasta 7 horas en conversacin y hasta 200 horas en espera (segn configuracin y uso del dispositivo). CUIDADO Y mANTeNImIeNTO El dispositivo Lazer Link utiliza componentes de ltima tecnologa y est construido siguiendo los ms altos estndares. Para evitar que el dispositivo sea daado de forma inadvertida por favor lea atentamente las siguientes recomendaciones:
- No intente abrir ninguno de los componentes del sistema, ya que las partes electrnicas del interior podran resultar daadas. Adems intentar abrir o modificar la batera podra resultar peligroso.
- Mantenga el Lazer Link fuera del alcance de los nios.
- Guarde el Lazer Link en un lugar seco. La humedad y el vaho pueden daar los circuitos electrnicos.
- Evite exponerlo a temperaturas extremas. El fro intenso puede provocar vaho en el interior de los componentes cuando se calienten de nuevo. El calor extremo puede daar la batera, circuitos o envoltorios.
- No dejar caer, golpear o retorcer los componentes pues los circuitos del interior podran resultar daados.
- No pintar ni decorar el Lazer Link pues se podran daar los envoltorios o no permitir el correcto funcionamiento.
- No usar productos qumicos, disolventes o detergentes para limpiar el Lazer Link, ya que estos podran daarlo. SOLUCIN De PROBLemAS Si no puede conectar su dispositivo Lazer Link al telfono mvil:
- Compruebe que el Lazer Link est encendido.
- Compruebe que su telfono mvil est encendido y tiene activada la funcin Bluetooth.
- Compruebe que ambos estn asociados.
- Compruebe que el dispositivo Lazer Link y su telfono mvil no estn a una distancia superior a 10 metros. GARANTA La garanta slo es vlida con la presentacin de la factura original de compra expedida por el vendedor al comprador original y mostrando la fecha de compra. Esta documentacin debe acompaar al dispositivo a reparar. Esta garanta no cubre defectos ocasionados por el desgaste natural debido al uso o mal uso del dispositivo, inclusive pero no limitado a las condiciones diversas que MEG Lazer Link bichro 135 X 80 mm DEF.indd 32-33 21/11/12 11:48
- 32 -
- 33 -
son habituales y normales segn las instrucciones de uso y mantenimiento suministradas por Lazer Link. Esta garanta no cubre daos causados al dispositivo por accidente, manipulaciones, modificaciones o reparaciones, materiales corrosivos, fuerzas lquidos, ventilaciones inadecuadas, mayores. La garanta no cubre defectos ocasionados por el uso de accesorios que no sean originales de Lazer Link. Remover o quitar cualquiera de las etiquetas o sellos del producto invalida la garanta. Este producto est cubierto por la garanta de la ley vigente. UK WARNING ENCENDIDO APAGADO RESPONDER LLAMADA COLGAR LLAMADA RECHAZAR LLAMADA ACTIVAR MARCACIN VOCAL
(SEGN TELFONO) RE-LLAMADA (REPETICIN LTIMO N MARCADO) TABLA ReSUmeN Mantener pulsado el botn de control hasta que se oye una seal acstica y el LED parpadee en Azul. Mantener pulsado el botn de control hasta que el LED efecte un parpadeo en Rojo. Decir en alto cualquier palabra o pulsar una sola vez el botn control. Durante la llamada pulsar una sola vez el botn de control. Pulsar 2 veces seguidas el botn de control. Pulsar una vez el botn de control, decir nombre despus de or la seal acstica. Pulsar 2 veces seguidas el botn de control. CONECTAR/INICIAR INTERCOM Pulsar el botn de control unos 2 segundos hasta or una seal acstica. DESCONECTAR/FINALIZAR INTERCOM VOLUMEN EN INTERCOM Pulsar el botn de control unos 2 segundos hasta or una seal acstica. Pulsando el botn de control se cambia el volumen en Intercom. Por cada pulsacin se cambia el nivel en un ciclo (bajo->medio->alto->bajo) Nota : Para ahorrar batera, el dispositivo se apaga automaticamente a los 4 minutos si no est conectado con ningn dispositivo Bluetooh European CE Notice This product has an embedded, non-replaceable battery, do not attempt to open the product or remove the battery as this may cause injury and damage the product. Please contact the local recycling facility for removal of the battery. The embedded, non-
replaceable battery is designed to last the life time of the product.
(Applicable in those countries of the European Union with recycling systems) The symbol shown on this product or on its documents indicates that the product must not be disposed of with other domestic refuse at the end of its life cycle. To avoid damage to the environment or to health caused by the inappropriate disposal of refuse, the user is requested to separate this product from other refuse and to recycle it responsibly to favor the sustainable re-use of material resources. Domestic users are invited to contact the sales point where the product was purchased or the local office with information regarding recycling of this type of product. Business users are invited to contact their suppliers and to check terms and conditions of purchase. This product must not be disposed of together with other commercial refuse
- 34 -
- 35 -
European CE Notice This product is in conformity with the essential regulations and requirements of Council Directive 1999/5/EC (referred to as R&TTE Directive). This product is manufactured in accordance to the essential standards and other norms under this directive. The user is forbidden from making variations or modifications of any kind to the device, any variation or modification will cancel the users authorization for the use of the device. Federal Communications Commission (FCC) Statement You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio MEG Lazer Link bichro 135 X 80 mm DEF.indd 34-35 21/11/12 11:48 or television reception, which can be determined by turning the equipment off and on, there user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technical for help. FR AVeRTISSemeNTS Ce produit contient une batterie non remplaable. Nessayez pas douvrir le produit ou denlever la batterie car cela endommagerait le produit. Veuillez contacter le centre de recyclage le plus proche pour collecter la batterie. La batterie non-
remplaable est conue pour durer autant que le produit.
(Applicable dans les pays de lUnion europenne et dans les pays prvoyant le tri slectif des dchets) Le symbole figurant sur le produit ou sur la documentation correspondante, indique que le produit ne doit pas tre limin comme dchet ordinaire au terme de sa dure de vie. Pour garantir le respect de lenvironnement et prvenir les effets dommageables pour la sant que peut avoir llimination des dchets, lutilisateur doit veiller sparer ce produit des autres dchets et lliminer de telle sorte que les matriaux dont il est constitu puissent tre recycls au bnfice dune utilisation compatible et responsable des ressources. Les particuliers sont pris de prendre contact avec le revendeur du produit ou les services locaux comptents pour obtenir les informations ncessaires quant au tri slectif et au recyclage de ce type de produit. Les entreprises sont quant elles pries de prendre contact avec leur fournisseur et de vrifier les conditions stipules dans le contrat dachat. Le produit objet de la prsente documentation ne doit pas tre limin conjointement aux autres dchets commerciaux. Le prsent accessoire est marqu de la certification CE conformment aux dispositions de la directive R&TTE (99/5/CE). Laccessoire est conforme aux standards essentiels et autres dispositions importantes de la Directive 1999/5/CE. Lutilisateur nest en aucun cas autoris apporter des modifications au dispositif de quelque nature que ce soit. Toute modification non expressment approuve entrane, pour son dtenteur, linterdiction dutiliser le dispositif. IT AVVeRTeNZe questo prodotto ha allinterno una batteria non sostituibile dallutente, non tentare di aprire il dispositivo o rimuovere la batteria, questo pu causare malfunzionamenti e danneggiare seriamente il prodotto. In caso di smaltimento del prodotto si prega di contattare il locale ente di smaltimento rifiuti per effettuare la rimozione della batteria. La batteria contenuta alinterno del dispositivo e stata progettata per poter essere utilizzata durante tutto il ciclo di vita del prodotto. (Applicabile in paesi dellUnione Europea e in quelli con sistemi di raccolta differenziata) Il marchio riportato sul prodotto o sulla sua documentazione indica che il prodotto non deve essere smaltito con altri rifiuti domestici al termine del ciclo di vita. Per evitare eventuali danni allambiente o alla salute causati dallinopportuno smaltimento dei rifiuti, si invita lutente a separare questo prodotto da altri tipi di rifiuti e di riciclarlo in maniera responsabile per favorire il riutilizzo sostenibile delle risorse materiali.
- 36 -
- 37 -
Gli utenti domestici sono invitati a contattare il rivenditore presso il quale stato acquistato il prodotto o lufficio locale preposto per tutte le informazioni relative alla raccolta differenziata e al riciclaggio per questo tipo di prodotto. Gli utenti aziendali sono invitati a contattare il proprio fornitore e verificare I termini e le condizioni del contratto di acquisto. questo prodotto non deve essere smaltito unitamente ad altri rifiuti commerciali. questo prodotto contrassegnato dal marchio CE in conformit con le disposizioni della Direttiva R & TTE (99/5/
CE). questo prodotto e conforme ai requisiti essenziali e ad altre rilevanti disposizioni previste dalla Direttiva 1999/5/CE. fatto divieto allutente di eseguire variazioni o apportare modifiche di qualsiasi tipo al dispositivo. Variazioni o modifiche non espressamente approvate annulleranno lautorizzazione dellutente allutilizzo dellapparecchiatura. MEG Lazer Link bichro 135 X 80 mm DEF.indd 36-37 21/11/12 11:48 De HINWeISe in in den der Europischen Gemeinschaft taaten mit getrennter Dieses Gerat enthalt einen integrierten, nicht auswechselbaren Akku. Bitte versuchen Sie nicht, diesen zu entfernen. Der Versuch, den Akku zu entfernen, kann zu Beschadigungen am Gerat fuhren. Lassen Sie dieses Gerat nur uber den Fachhandel oder durch eine offiziellen Sammelstelle entsorgen. Dieses Gerat muss entsprechend geltender Umweltrichtlinien und Vorschriften entsorgt werden.
(Anwendbar angehrenden Staaten und Mllsammlung). Dieses am Produkt oder auf der Bedienungsanleitung angebrachte Zeichen weist darauf hin, dass das Produkt nicht zusammen mit anderem Hausmull entsorgt werden darf. Zum Vermeiden von Umwelt- und Gesundheitsschaden durch die unsachgemase Entsorgung von Abfall wird der Anwender gebeten, dieses Produkt von anderen Abfalltypen zu trennen und dem Recycling zuzufuhren, um die Wiederverwertung der Rohstoffe zu fordern. Der Privatanwender wird gebeten, den ortlichen Vertragshandler, bei dem das Produkt erworben wurde, oder die zustandige ortliche Behorde fur Informationen bezuglich der Mulltrennung und des Recyclings dieses Produkttyps zu kontaktieren. zu Unternehmen werden gebeten, kontaktieren und die zu uberprufen. Dieses Produkt darf nicht zusammen mit anderem Handelsmull entsorgt werden. Zulieferer Kaufvertragsbedingungen ihren ist Dieses Produkt in Konformitat mit den Vorschriften der R & TTE Richtlinie (99/5/EG) mit dem CE-Zeichen versehen. Damit dieses Produkt die wesentlichen Anforderungen und anderen Vorschriften der Richtlinie 1999/5/EG erfullt. Dem Anwender ist ausdrucklich verboten, Abanderungen und unerlaubte Eingriffe jeglicher Art an der Vorrichtung oder durchzufuhren. Abnderungen annullieren die Genehmigung zum Gebrauch des Gerats. ausdrucklich Eingriffe Nicht reproducido en el producto o en
(Aplicable en pases de la Unin Europea y en aquellos con sistemas de recoleccin diferenciada) El smbolo la documentacin indica que el producto no se debe eliminar como otros residuos domsticos al finalizar su ciclo de vida. Para evitar eventuales daos al medio ambiente o a la salud a causa de la incorrecta eliminacin de los residuos, se invita al usuario a separar este producto de otro tipo de residuos y reciclarlo en forma responsable para favorecer la reutilizacin sostenible de los recursos materiales. Se invita a los usuarios domsticos contactar al revendedor en donde adquirieron el producto o a la oficina local destinada a informar sobre la recoleccin diferenciada y sobre el reciclado para este tipo de productos. Las empresas usuarias estn invitadas a contactar a su proveedor y comprobar los trminos y las condiciones del contrato de compra. Este producto no se debe eliminar junto a otros residuos comerciales.. Este producto posee el marcado CE conforme a las disposiciones de la Directiva R & TTE (99/5/
CE). En consecuencia este producto est conforme a los requisitos esenciales y con otras disposiciones de importancia previstas por la directiva 1999/5/CE. Se prohbe al usuario realizar alteraciones o modificaciones de cualquier tipo en el dispositivo. Las variantes o modificaciones no expresamente aprobadas anularn la autorizacin del usuario para utilizar el equipo. eS ADVeRTeNCIAS Este producto tiene une batera no reemplazable. No intente abrir el producto o quitar la batera, daara el producto. Por favor pngase en contacto con el centro de reciclaje el ms cerca para recoger la batera. La batera no reemplazable es diseada para durar tanto como el producto.
- 38 -
w w w . l a z e r h e l m e t s . c o m MEG Lazer Link bichro 135 X 80 mm DEF.indd 38-39 21/11/12 11:48 LAZeR Headquarters Rue Andr Dumont 3 B-1435 Mont-Saint-Guibert - Belgium Tel. : + 32 (0)10 300 300 Fax : + 32 (0)10 300 339 Mail : info@lazerhelmets.com w w w . l a z e r h e l m e t s . c o m 2 1 1 1
i k n L r e z a L G E M MEG Lazer Link bichro 135 X 80 mm DEF.indd 40 21/11/12 11:48
1 | Label | ID Label/Location Info | 45.60 KiB |
4cm Powered by e Inside TWulins Technology LIN: 627011203 LAZER LINK ( aq Model: in3 FCC ID: DDOTWIN3 Made in China 3cm
1 | Cover letter | Cover Letter(s) | 34.54 KiB |
MAT GLOBAL SOLUTIONS, SL. C/ Sant Sebasti, 202 bis 1a-E08223 TERRASSA (Barcelona) - Spain 2013-01-28 Attn: Director of Certification Authority to Act as Agent Dear Sir/Madam, We, MAT GLOBAL SOLUTIONS, SL., hereby authorize China Certification &
Inspection Services Co., Ltd.1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China, Bruce.Zhang. To act as our agent in the preparation of FCC application for the following project:
Bluetooth hands free kitin3 We affirm that submitted documents have properly described the device or system and each unit manufactured, the Federal Communications Commissions regulations will be affixed to a label submitted for approval with this application. Dated this Agency agreement expiration date:
By:
2014-01-28 imported or marketed, as defined 2013-01-28 in Xavier Mateu Printed MAT GLOBAL SOLUTIONS, SL. Signature Title: CEO On behalf of :
Telephone: 0034937336566
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2013-02-19 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2013-02-19
|
||||
1 | Applicant's complete, legal business name |
MAT GLOBAL SOLUTIONS, SL.
|
||||
1 | FCC Registration Number (FRN) |
0021610720
|
||||
1 | Physical Address |
Sant Sebasti, 202 bis 1a
|
||||
1 |
TERRASSA, E08223
|
|||||
1 |
Spain
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
s******@nemko.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
DDO
|
||||
1 | Equipment Product Code |
TWIN3
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
X**** M******
|
||||
1 | Title |
CEO
|
||||
1 | Telephone Number |
00349********
|
||||
1 | Fax Number |
00349********
|
||||
1 |
i******@matgroup.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
China Certification & Inspection Services Co., Ltd
|
||||
1 | Name |
B******** Z******
|
||||
1 | Physical Address |
1st Floor, Block No.2, Laodong Industrial Zone
|
||||
1 |
Shenzhen
|
|||||
1 |
China
|
|||||
1 | Telephone Number |
+86-0******** Extension:
|
||||
1 |
B******@gts-ccis.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Bluetooth hands free kit | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output power listed is peak conducted. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Shenzhen Zhongjian Nanfang Testing Co.,Ltd
|
||||
1 | Name |
B******** Z****
|
||||
1 | Telephone Number |
86-75********
|
||||
1 | Fax Number |
86-75********
|
||||
1 |
b******@ccis-cb.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0024600 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC