Matias One Keyboard for iPhone & Mac Setup Instructions System Requirements Mac with available USB port iPhone 3GS or newer, iPod touch 3rd generation (2009) or newer Tap on General Plug the One Keyboard into your Mac Press the iPhone button It should start flashing blue If it's not flashing, then hold it down for a few seconds until it starts flashing Open the Settings app on your iPhone or iPod touch Tap on Bluetooth If Bluetooth is off, tap the OFF button to turn it ON Bluetooth will begin searching for devices When the keyboard appears, tap on Not Paired A message telling you the passkey will appear Type the passkey on the numberpad Then press the Enter key The keyboard is now connected and ready to be used To switch between iPhone & Mac, press the iPhone button on the keyboard The button glows blue when connected to your iPhone The button is white when connected to your Mac REMEMBER... Bluetooth keyboards prevent the onscreen keyboard from appearing There two ways to make it reappear... 1) Press F5 on the One Keyboard 2) Or, turn off Bluetooth APPENDIX FCC Warning Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Prohibition of Co-location This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter Safety Information To maintain compliance with FCCs RF exposure guidelines, this equipment should be installed and operated with minimum distance 2.5cm between the radiator and your body. Use on the supplied antenna. Use on the supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regulations. APPENDIX Declaration of Conformity for R&TTE directive 1999/5/EC Essential requirements Article 3 Protection requirements for health and safety Article 3.1a Testing for electric safety according to , EN50392 and EN 60950-1 has been conducted. These are considered relevant and sufficient. Protection requirements for electromagnetic compatibility Article 3.1b Testing for electromagnetic compatibility according to EN 301 489-1 and EN 301 489-17 has been conducted. These are considered relevant and sufficient. Effective use of the radio spectrum Article 3.2 Testing for radio test suites according to EN 300 328 has been conducted. These are considered relevant and sufficient. CE Mark Warning This is a Class B product, in a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.