MATRIX POWERWATCH X TURN ON PAIR WITH YOUR SMARTPHONE REAL TIME ENERGY HARVESTING OPTIMAL CHARGING CONDITIONS POWER & BACKLIGHT TRACK ACTIVITY MODE button SCROLL knob SET button 1 1 2 1. Hold MODE and SET for one second. 1. Download & launch iOS or Android app. 2. From Welcome screen, press SET. The bars around the display rise and fall depending on how much heat you provide. Put your PowerWatch X on a friends wrist, observe as the bars rise, then thank them for donating their calories to charge your battery!
Note: The following instructions apply to PowerWatch, Black Ops and PowerWatch X. Download the Matrix PowerWatch X app for iOS or Android. In order charge its internal battery, the MATRIX PowerWatch X requires a temperature differential with the ambient air. This means that it can generate more power when the air is cooler, and also when you are active and your skin is warmer. Here is a chart that shows how fast the PowerWatch X will charge its internal battery at different air temperatures:
How Fast the PowerWatch X Charges 60 Quickly Very quickly Very quickly Air Temperature 70 Slowly Quickly Very quickly 80 No Slowly Quickly Sitting Walking Running As you can see on the chart, the PowerWatch X will charge its battery most quickly when you are active
(walking or running), and when the ambient temperature is below 80F. Above 90F, the PowerWatch X cannot charge its internal battery. PowerSave Mode:
The PowerWatch X measures your steps and activity. After about 45 minutes of inactivity, the PowerWatch X will automatically turn on a screensaver. Moving the watch or pressing any button will clear the screensaver. After a week of inactivity, the PowerWatch X will enter PowerSave mode and turn off the screen. If fully charged, your settings should be saved for one year or more. When you are ready to use the PowerWatch X again, turn it on again by pressing MODE and SET together. Keeping the PowerWatch X Charged:
The PowerWatch X charges whenever you wear it. It charges even faster on the inside of your wrist. Turn On Backlight:
Hold MODE for two seconds. 1 2 1. Press MODE until Daily Activity screen appears. 2. Turn SCROLL to read Steps, Calories and Sleep. Steps, Calories & Sleep are tracked automatically and reset each day. Results sync to iOS or Android app. RUNNING MODE SYNC DATA TO YOUR SMARTPHONE STOP WATCH AUTO SLEEP TRACKING NOTIFICATIONS SUPPORT 1 2 1 2 1 2 1 2 The PowerWatch X can track each run you take. 1. Press MODE until Running Mode screen appears. 2. Press SET to cycle through Start, Stop and Reset. 1. While under the Watch Settings menu, SCROLL until the Mobile screen appears. 2. Press SET to sync. 1. Press MODE until Stop Watch screen appears. 2. Press SET to cycle through Start, Stop and Reset The PowerWatch X automatically senses when you sleep and wake. 1. Press MODE until Daily Activity screen appears. 2. Turn SCROLL to read Todays Sleep data. Activity goal met Alarm ringing See https://store.powerwatch.com/pages/f-a-q for more details. See https://store.powerwatch.com/pages/f-a-q for more details. Display may update slowly, but Stop Watch result is accurate. Incoming call Message received Our Frequently Asked Questions (FAQ) page is filled with detailed instructions, tips and warranty information:
https://store.powerwatch.com/pages/f-a-q The Matrix PowerWatch X does not need charging under normal use, which includes: adjusting the watch so it stays in direct contact with the users wrist; limiting Bluetooth and backlight activity while the watch is worn on the users wrist; and not activating the watch unnecessarily or repeatedly when it is not worn on the users wrist. PowerWatch X firmware can be updated through the app. One Year Satisfaction Guarantee See the FAQ and guarantee at https://store.powerwatch.com/pages/f-a-q. For questions or problems, contact us at support@matrixindustries.com. Thank you!
REGULATORY STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. WARNING: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Manufacturers name: Matrix Industries Inc. FCC ID: 2ANY2MPW05 EUROPE (EU) 1.Safety:
a) Rated Voltage: 3.8V DC, 105mA Battery Type: Lithium-ion Polymer (3.8V, 210mAh) b) Model Name: PowerWatch X Operation Temperature: 45C max c) d) Manufacturers name: Matrix Industries Inc e) Manufacturer name & address: Matrix Industries Inc. 1455 Adams Drive, Suite 1190 Menlo Park, CA 94025 USA f) 2. RF & EMC Frequency band(s) = 2402-2480MHz Maximum radio frequency power transmitted in the frequency band(s) = -5.58dBm Declaration of Conformity Inserts Hereby, Matrix Industries Inc, declares that the radio equipment type is in compliance with Directive 2014/53/EU. The declaration of conformity may be consulted at www.powerwatch.com/declaration.pdf This equipment may be operated in:
JAPAN CHINA CANADA This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement.