INDEX Features What's in the box?
Remote Control Rear Panel NFC Pairing Bluetooth Pairing Other Ways To Connect Transmitter And Receiver Option Important Safety Instructions FCC Compliance FCC RF Exposure Requirements (MPE) Specifications / Blue Aura Worldwide Guarantee 2 3 4 5 6 7 8 9 10 13 14 15 1 X3020130621.indd 1 2013/7/16 03:08:53 x30 2 Features:
+ Powered stereo speaker system with Bluetooth 4.0
+ NFC Bluetooth pairing function
+ Use with any source with Line-in or optical input
+ aptX audio coding delivers CD-quality sound wirelessly over Bluetooth
+ Pair & Play X3020130621.indd 2 2013/7/16 03:08:54
What's in the box?
2 x Bluetooth Speaker 1 x Remote Control 1 x Power Cords 1 x Blue Aura Quick Connect Cable 1 x Audio Cable- (Mini Jack Mini Jack) 3 X3020130621.indd 3 2013/7/16 03:08:54 Remote Control POWER ON/OFF BLUETOOTH PAIRING INPUT SELECTION MUTE VOL+
VOL-
4 X3020130621.indd 4 2013/7/16 03:08:55 OPTICAL INPUT BLUETOOTH PAIRING BUTTON AUX IN
(AUDIO INPUT) SUB OUT Rear Panel USB FOR BLUE AURA WIRELESS RECEIVER ONLY WB29 (OPTIONAL) WALL BRACKET POWER INPUT BLUE AURA QUICK CONNECTION 5 X3020130621.indd 5 2013/7/16 03:08:55 NFC Pairing (where available) Step 1 Step 2 ON OFF Step 3 RedBlue Step 4 Blue Hint: Ensure NFC function is enabled in your Bluetooth device, refer to your device manual for further information. Near Field Communication A contactless way to pair Bluetooth enabled devices 6
www.blueaura/information X3020130621.indd 6 2013/7/16 03:08:57 Bluetooth Pairing Step 1 Step 3 1 M Bluetooth BLUE AURA X30
. Step 2 Step 4 Blue SETTINGS 7
www.blueaura/information X3020130621.indd 7 2013/7/16 03:08:58 Other Ways To Connect Optical Out Optical In Line Out Line In Red Green 8 X3020130621.indd 8 2013/7/16 03:08:59 Important Safety Instructions The loudspeaker is covered with a soft faux leather material. Please take care when unpacking the loudspeaker to avoid scratching or indenting the material. Warning: The AC Input connector (see page 5) is used as a safety disconnect device. It must be easily accessible after installation. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth. Correct disposal of this product:
This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling. 10 X3020130621.indd 10 2013/7/16 03:09:04 01. Read these instructions. 02. Keep these instructions. 03. Heed all warnings. 04. Follow all instructions. 05. Do not use apparatus near water. 06. Clean only with a dry cloth. 07. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 08. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 09. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 10. Only use attachments/accessories specified by the manufacturer. 11. Unplug this apparatus during lightning storms or when unused for long periods of time. 12. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 13. Damage Requiring Service Unplug the apparatus from the wall outlet and refer servicing to qualified service personnel under the following conditions:
A. When the power-supply cord or plug is damaged, B. If liquid has been spilled, or objects have fallen into the apparatus, 11 X3020130621.indd 11 2013/7/16 03:09:04 C. If the apparatus has been exposed to rain or water, D. If the apparatus does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the apparatus to its normal operation. E. If the apparatus has been dropped or damaged in any way, and. F. When the apparatus exhibits a distinct change in performance this indicates a need for service. 14. Object and Liquid Entry. Never push objects of any kind into the apparatus through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases shall be placed on the apparatus. Dont put candles or other burning objects on top of this unit. Always consider the environmental issues and follow local regulations when disposing of batteries. 15 Always consider the environmental issues and follow local regulations when disposing of batteries. 16. If you install the apparatus in a built-in installation, such as a bookcase or rack, ensure that there is adequate ventilation. Leave 20 cm (8) of free space at the top and sides and 10cm (4) at the rear. The rear edge of the shelf or board above the apparatus shall be set 10 cm (4) away from the rear panel or wall, creating a flue-like gap for warm air to escape. 17. The power supply and power cord for this apparatus is intended for indoor use only. 18. Only use the enclosed AC adaptor. Designed, engineered and supported in the UK www.blueaura.co.uk 12 X3020130621.indd 12 2013/7/16 03:09:04 FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The transmitter of this device has been designed to operate with the attached antennas, and having a maximum gain of 1.5dBi. Antennas not identical as that or having a gain greater than 1.5dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication 13 X3020130621.indd 13 2013/7/16 03:09:04 FCC RF Exposure Requirements (MPE) To satisfy FCC RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended. Les antennes installes doivent tre situes de facon ce que la population ne puisse y tre expose une distance de moin de 20 cm. Installer les antennes de facon ce que le personnel ne puisse approcher 20 cm ou moins de la position centrale de l antenne. La FCC des tats-Unis stipule que cet appareil doit tre en tout temps loign dau moins 20 cm des personnes pendant son functionnement. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. 14 X3020130621.indd 14 2013/7/16 03:09:04 Blue Aura Worldwide Guarantee This entitles you to have the unit repaired free of charge, during the first two years after purchase, at any authorised Blue Aura distributor provided that it was originally purchased from an authorised Blue Aura dealer or distributor. The manufacturer can take no responsibility for defects arising from accident, misuse, abuse, wear and tear, neglect or through unauthorised adjustment and/or repair, neither can they accept responsibility for damage or loss occurring during transit to or from the person claiming under the guarantee. The warranty covers:
Parts and labour costs for two years from the purchase date. After two years you must pay for both parts and labour costs, the warranty does not cover transportation costs at any time. Claims under guarantee This equipment should be packed in the original packing and returned to the dealer from whom it was purchased, or failing this, directly to the Blue Aura distributor in the country of residence.It should be sent carriage prepaid by a reputable carrier. No responsibility can be accepted for the unit whilst in transit to the dealer or distributor and customers are therefore advised to insure the unit against loss or damage whilst in transit. For further details contact Blue Aura at:
Blue Aura Customer Support, 01480 477738 or email support@blueaura.co.uk. If your Blue Aura dealer is unable to answer any query regarding this or any other Blue Aura product please contact Blue Aura Customer Support at the above address and we will do our best to help you. Please register your new product at http://www.blueaura.co.uk/register Blue Aura reserves the right to change all specifications without notice. (E & OE) 15 X3020130621.indd 15 2013/7/16 03:09:04 Specifications:
Speakers Tweeter: 20mm Soft Dome Woofer: 3.5 Paper Cone, Ferrite Magnet Amplifier Maximum power output (RMS):
15W*4 1% THD limited 11Wu*4 Harmonic distortion: 0.15% 1W 0.2% 10W Signal/Noise ratio: 82dB Separation: 75dB 1KHZ Input/Out put Speaker output on right channel speaker: RJ-45 Speaker input on left channel speaker: RJ-45 Analog input: RCA jacks USB Charger Port: 5V, 250mA (for Blue Aura wireless dongle use only) Bluetooth wireless connection: Bluetooth 4.0 with aptX, SBC; A2DP and AVRCP profiles. EC DECLARATION OF CONFORMITY This product conforms with the following EEC Directives, their supporting Statutory Instruments and relevant Standards, where applicable as follows:
EC Council Directive on electromagnetic compatibility 2004/108/EC, Applicable standards with amendments: EN5013:2001 + A1:2003 + A2:2006 EN55020:2007 EN 55022 EN 55024 IEC 60950-1:2005 EN61000-3-2:2006 + A1:2009 + A2:2009 EN61000-3-3:2008 EC Low Voltage Directive 2006/95/EEC, Applicable standard with amendments: EN60065:2002 + A1:2006 + A11:2008 +
A2:2012 EN 300 328: (Bluetooth) Electromagnetic compatiblitity and Radio spectrum Matters (ERM); Wideband Transmission systems: Data transmission equipment operating in the 2.4 GHz ISM band and using spread spectrum modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive. Stage 1 of annex II of Commission regulation (ErP) EC no. 1275/2008 The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by BLUE AURA is under license. 2013 CSR plc and its group companies. The aptX mark and the aptX logo are trade marks of CSR plc or one of its group companies and may be registered in one or more jurisdictions. Other trademarks and trade names are those of their respective owners.The"N-Mark" logo is a trademark or registered trademark of NFC Forum, Inc.Product specifications may change without prior notice. 16 X3020130621.indd 16 2013/7/16 03:09:04