16
/
R-6BT Multi Band Radio
/
AM/FM/SW1-7 9 BAND RADIO OPERATING INSTRUCTION CONTROLS
(1) HANDLE
(2) TELESCOPIC ANTENNA
(3) AM/FM/SW BAND SELECTOR
(4) DIAL SCALE
(5) TURNING KNOB
(6) POWER ON/OFF &VOLUME CONTROL KNOB
(7) RADIO/BLUETOOTH/USB (OPTIONAL)
(8) AC JACK
(9) HEAD PHONE JACK
(10) DC JACK
(11) F. FWD USB
(12) REW USB
(13) PLAY USB/PICK UP PHONE/CALL BACK
(14) USB JACK
(15) BASS KNOB
(16) MIC(FOR BLUETOOTH USE ONLY) POWER SUPPLY Battery operation open the battery door and insert 3pcs UM-1 batteries OPERATION FOR RADIO 1.Open the Volume, press the function button to Radio, then select FM, AM or SW1-7 position. 2.Turn the turning knob to desired the channel. 3.Turn the Volume adjusted Sound level. OPERATION OF USB FUNCTION 1.Turn on the volume button open the power, press function button to the USB insert the USB disk. 2.Press to play the next songs. Press play the return songs. 3.Long Press to increase the sound level. Long press to reduce the sound level. 4.Press to play/pause the songs. 5.Long Press change to Bluetooth function. OPERATION OF BLUETOOTH FUNCTION:
1.Turn on the volume button open the power, press function button to the BT. Use the mobile phone to connect the radio. 2.Press play the next songs. Press to play the return songs. 3.Long Press to increase the sound level. Long press to reduce the sound level. 4.Press to play/pause the songs. 5.When the phone calling, press answer the call. Long press hang up. Double fast press call back. 6.Long Press change to USB function. SPECIFICATIONS Power Supply AC: 120V/60Hz-240V/50Hz Speaker : 4 ohm 3w Frequency : AM:530-1600KHz SW:3.6-19MHz FM:88-108MHz FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.