LED Candle Speaker M0716B INSTRUCTION MANUAL PLEASE READ ALL INSTRUCTIONS CAREFULLY
& RETAIN FOR FUTURE USE 1 Getting Started Remove the product from the box. Remove any packaging from the product. Please retain all packaging until you have checked and counted all the parts and the contents against the parts list. Package Contents Flameless LED Candle with Wireless Speaker USB charging cable Instruction manual Features 1. Flameless LED Candle 2. Made from Real Wax 3. 4. 5. 6. 7. 8. IMPORTANT SAFETY INFORMATION 1. 2. Do not leave this product unattended while connected to the power supply. 3. Do not use if product has been dropped or damaged in any way. 4. Flickering Flame-Effect Built-in Bluetooth Speaker Stream wireless music from up to 10 metres away Built-in Rechargeable Battery Compliments any home dcor Simple and easy to use Repairs to electrical equipment should only be performed by qualified personnel. Improper repairs may place user at serious risk. Place product on sound, even surface, free of vibrations and away from sources of heat. Read all instructions before using this product. 5. Keep free of dust, lint, hair etc. Keep this product out of reach of children. 6. Do not put objects into openings. 7. 8. Do not use this product for anything other than its intended use. 9. 10. This product is not a toy. 2 Description of Parts:
S. No. Description 1 2 3 ON/OFF Switch (bottom) Charging Port Real Wax S. No. 4 5 Description LED Light Charging LED Indicator INSTRUCTIONS FOR USE LED Candle Speaker For best results, fully charge the product before its first use. 1. Connect the USB charging cable (included) to the charging port of the Flameless LED Candle and insert the other end into a port on your computer or similar power source. 2. Red Charging LED Indicator turns on indicating that the battery is being charged. It takes around 3 hours to fully charge the device. When the battery is fully charged, LED Indicator will turn to Green. Turn On/Off the LED Candle Speaker Slide the ON/OFF switch to turn on/off the candle. Bluetooth speaker turns on/off automatically, when the candle is turned on/off. Turn the speaker to Bluetooth pairing mode -
1. Slide the ON/OFF switch to turn on the speaker. This also turns the LED Candle on. 2. You will hear the indication tone, indicating that your speaker is entering the 3 pairing mode.
(Note: Speaker automatically pairs with the previously paired devices) Pairing your smart phone, tablet etc with the Bluetooth Speaker Your Bluetooth Speaker can wirelessly stream audio from any Bluetooth enabled device such asn your smart phone, tablet etc within the distance of 26-33 Feet. Simply follow the below steps. 1. Slide the ON/OFF switch to turn on the speaker. This also turns the LED Candle on. 2. You will hear the indication tone, indicating that your speaker is entering the pairing mode. 3. Turn on the Bluetooth on your smart Phone or Tablet or Computer. 4. It will search for nearby Bluetooth devices. 5. Youll find this product in the list of scanned devices as CANDLE SPEAKER. Tap on CANDLE SPEAKER from the list, in order to pair it with your smart phone etc. 6. If required, enter the password 0000 to confirm the pairing. 7. Once paired successfully, you would hear another indication tone. 8. If you fail to pair it within the time frame or you want to pair it with a new source please follows the steps outlined above. Select your favorite song at the source device (your smart phone, tablet etc) and music would now stream through Bluetooth speaker. All functions, like play/pause/skip forward/skip backward/volume control etc, can be only controlled from the source device. Dos and Donts Do not play music at excessive levels. Damage to hearing and/or equipment may result. Specification Bluetooth version Speaker Product Size Product Weight Play time Charge Voltage Charging time Bluetooth Range Built-In Rechargeable Battery
(Note: Battery life & charging time may vary based on individual usage, handling & types of devices connected)
: 4.2
: 3 Watts
: Dia. 3xL6 max.
: 8.7 oz
: up to 2 hours
: DC5V (USB)
: Up to 3 Hours
: 26-33 Feet
: 3.7V / 500mAh 4 Troubleshooting Problem Low sound level Sound distorted No sound at all. Possible Cause Source (Tablet, Mobile Phone, Laptop, etc.) volume too low. Battery dead Battery nearly dead Source (Tablet, Mobile Phone, Laptop.) turned off. Speaker turned off. Volume turned down source. Media paused on source. Solution Adjust volume at source. Charge the Battery. Charge the Battery. Turn the source on. Turn the speaker on. Adjust volume at source. Play media from source. Care and Maintenance Clean the product with a soft, damp cloth. Never use chemicals or hard abrasives. Keep this product away from wet or damp surroundings. FCC Instructions Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the product. NOTE: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If the product does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures :
- Reorient or relocate the receiving antenna.
- Increase the separation between the product and receiver.
- Connect the product into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device 5 must accept any interference received, including interference that may cause undesired operation. 6