LED DESK LAMP BT SPEAKER Model: M07030 Getting started Remove the speaker from the box Remove any packaging from the product Place the packaging inside the box and store for safekeeping Instructions for use Please read all instructions carefully Product Diagram In the box Bluetooth Speaker LED Table Lamp Micro USB cable Aux cable Instruction Manua Features
- Enjoy music wirelessly with great sound quality.
- Bluetooth wireless connection functionality.
- Table lamp with LED light. Safety Instructions When using any electrical product, basic safety precautions should always be followed including the following:
Incorrect operation and improper use can damage the product and cause injury to the user. Keep the unit away from heat sources, direct sunlight, humidity, water and any other liquids. Do not use the unit if it has been dropped or damaged in any way. Repairs to electrical equipment should only be performed by a qualified electrician. Improper repairs may place the user at serious risk. Do not put objects into any of the openings. Indoor use only. Keep the unit free from dust, lint etc. Do not use the unit with wet hands. Do not use the unit for anything other than its intended use. Keep the unit out of reach of children. This product is not a toy. Do not use abrasive cleaning solvents to clean. To minimize the risk of fire or electrical shock, avoid operating in wet conditions such as rain or humidity. Do not expose to excessive heat such as sunshine, fire ect. Never immerse the unit in water or any other liquid for cleaning purposes. Always disconnect from the mains after use. 1 2 3 4 5 6 7 8 USB charging port Used to charge the battery. AUX in jack AUX IN play music. Power switch ON/ OFF Switch to power ON /OFF button to ON or OFF. Charge indicator light When charge the battery, Red LED light will illuminate red. When the battery is fully charged, the LED indicator will switch off. LED indicator light When the power ON / OFF of speaker switch to ON, the blue LED indicator will light. LED light Used to illumination. LED Light Switch Short touch the button switch to turn on/ off the LED lights, Hold touch the button switch to change brightness of LED lights. Speaker Speaker Please read these instructions thoroughly before use and retain for future reference SYLVANIA is a registered trademark of OSRAM Sylvania Inc. used under licese. INSTRUCTION FOR USE Charging Instructions:
The speaker comes with a built in rechargeable battery. Before using it for the first time it is recommended you charge the battery fully. The device can also be used whilst powered and is charging. Connect the USB charger cable to computer USB port or a USB wall charger (not included). Connect the other side to the USB charging slot of the Speaker, the battery charging LED indicator will illuminate red. When the battery is fully charged, the LED indicator will switch off. When the battery is running low, you will hear a tone to indicate the battery needs charging. Pairing the speaker with Bluetooth devices (phone or music device) Switch to power on / off button to on, youll hear a tone and the Bluetooth mode will turn on automatically, the blue LED indicator will light. Place the speaker and Bluetooth device (phone or music device) no further than 30 feet apart;
Activate the Bluetooth function on your Bluetooth device (phone or music device). Please refer to the manufacturers instructions for instructions on enabling Bluetooth on your device. Once you have activated Bluetooth on your device, select the pairing name Sylvania SP901 from the list of available Bluetooth devices. If required, enter the password 0000 to confirm to pairing. Once paired successfully, you will hear a tone indicating pairing successful. Once you have paired the speaker with a device, the speaker will remember this device and will pair automatically when the devices Bluetooth is activated and in range. You do not need to re-pair any previously connected devices. The speaker will attempt to automatically connect to the last device it was paired with when Bluetooth mode turn on. If you want to pair it with a new device, please turn OFF your last Bluetooth device (phone or music device) then use your new device to search and select the pairing name. Once the speaker is paired with your device the music will transmit directly to the speaker. Please refer to your devices user manual for further information. Listening to Music Once the speakers are paired with your device you can stream music wirelessly through the speaker. Select the track you wish to listen to and it will be streamed to your Bluetooth speaker. Should you encounter any problems while streaming please refer your devices user manual for further information. 1 2 3 Using AUX-in After the speaker is turned on, connect one end of the 3.5mm AUX cable (included) into AUX in jack, the other end of the Cable to connect MP3 / Smartphone to play music. When inserted the 3.5mm AUX cable to the AUX in jack, the Bluetooth will be disconnected automatically. Using the LED Function Bluetooth Speaker LED Table Lamp can be used the LED function independently of the speaker and be used as a regular table lamp. Note:
1. Short touch the LED switch to turn on/ off the LED lights, Hold touch the LED switch to change brightness of LED lights. Please Note Not all mobile phones support all the functions listed above. Please refer to your cell phones users manual for further information. Certain functions and indication tones may vary depending on your mobile phone. Cleaning & Maintenance Unplug the product from the supply if it is left unattended and before cleaning. NEVER immerse the product into water and use a dry cloth for cleaning Storage Turn off the power when not in use, clean and store safety. Specifications Bluetooth specification Bluetooth 5.0 Operating distance 10 meters (max.) Speaker power 1 x 3W Power input voltage DC 5V / 500mA Note: Battery life & charging time may vary based on usage & types of devices used. is a trademark on a registered trademark of Bluetooth SIG Inc. Guidelines for protection of the environment This appliance should not be put into the domestic garbage at the end of its useful life, but must be disposed of at a central point for recycling of electric and electronic domestic appliances. This symbol on appliance, instruction manual and packaging puts your attention to this important issue. The materials used in this appliance can be recycled. By recycling used domestic appliances you contribute an important push to the protection of our environment. Ask your local authorities for information regarding the point of recollection. Dos and Donts Read the following recommendations before using the speaker. Following these you will be able to enjoy the product for many years. Made in China Dont use abrasive cleaning solvents to clean the speaker. Do not expose the speaker to extremely high or low temperature as this will shorten the life of electronic devices, distort certain plastic parts. Dont dispose of the speaker in a fire as it will result in an explosion. Dont expose the speaker to contact with sharp objects as this will cause scratches and damage. Dont let the speaker drop on to the floor. The internal circuitry might get damaged. Dont attempt to disassemble the speaker as it may get damaged if you are not professional. Do not expose the speakers to heat or fire. Avoid storage in direct sunlight. Do not subject the speakers to mechanical shock. Do not add any fluids or solids to your lamp. Do not use the product if it has been damaged in any way. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. 4 5 6