FCC ID: 2BDB6-PBG-S2 Smart Pet Health care Repeater

COMPOSITION AND PART NANES The Peachbite Watch is a pet wearable device that collects your pets biological data through sensors. COMPOSITION AND PART NANES DEVICE COMPOSITION PEACHBITE WATCH PEACHBITE REPEATER 5pin USB Charging Cable Device QR Code User Manual Receive your pet's data from the Peachbite Watch and transmit to the server. The Peachbite Repeater helps you to check the pet's health status from anywhere any time. Purple LED LIGHTS Meaning of product LED lights When Charing : The red or orange light on A and the device does not operate. When charging is complete : A yellow-green light turn on. Device On-Off : Press and hold the power button, B will flash a blue light quickly. When the device is on : The light of B flashes weakly once every 0.5 seconds. LED LIGHTS - Meaning of product LED lights Purple Light : The Repeater is in the setting mode. Blue Light : The Repeater has been set up correctly and is ready to receive data. When the blue light is blinking, data is being transmitted and received from the Watch. When the setting of the Repeater is incorrect, the Red light is turned on. Prepare for using PEACHBITE WATCH Preparations Mobile phone, Peachbite watch, Peachbite repeater, power supply adapter or portable charger, home Wi-Fi ID and password (general Wi-Fi, not 5G) Prepare for using PEACHBITE WATCH When using the repeater indoors or at home, connect it to a power source. When walking with pets, you can connect the repeater to a power bank and take it with you. The Repeater uses both Bluetooth and Wi-Fi. The Watch and Repeater are connected via Bluetooth. The Repeater transmits the data received from the Watch to the server via Wi-Fi. You could access by https://app.peachbite.com, but some functions are not supported. Please download the PEACHBITE application to use it comfortably. REGISTERING YOUR PET STEP 01 STEP 02 STEP 01 After completing the mobile registration

(https:// app.peachbite.co.kr/), start registering your pet! Register your profile picture and press the Next button. TIP. It looks prettier if you upload it as a square

(1:1) ratio photo. STEP 02 Enter your pet information and click the Next button to complete your pet registration!

REGISTERING A REPEATER STEP 01 STEP 02 STEP 01 After completing pet registration, press the start button for repeater registration STEP 02 Enter the 12-digit ID attached to the repeater Or, press the QR code button to recognize the provided repeater QR code. REGISTER YOUR WATCH STEP 01 STEP 02 STEP 03 STEP 01 After completing the repeater registration, press the watch registration start button STEP 02 Select t a pet to register to the watch on the home screen. STEP 03 Enter the 12-digit ID attached to the Watch Or, press the QR code button to recognize the provided Watch QR code. Watch ID is in the original box REGISTERING A WATCH & SETTING UP A REPEATER STEP 04 STEP 05 STEP 04 Basic setup is complete. Turn on the watch and follow the repeater and indoor Wi-Fi settings. STEP 05 Move the switch on the side of the repeater up to change to [Setting Mode]

and connect it to an adapter or power bank. REGISTERING A WATCH & SETTING UP A REPEATER STEP 06 STEP 07 STEP 08 Select 'Peachbite Gateway' in your phone's Wi-Fi settings and enter 'i@ love@pet' in the password field. Connect by entering

'192.168.10.1' in the browser Enter the Wi-Fi name you are using in SSID and the Wi-Fi password in Password and save it. 5G Wi-Fi is not supported. Wi-Fi input requires case sensitivity. REGISTERING A WATCH & SETTING UP A REPEATER STEP 09 STEP 09 After cutting off the power supply to the repeater

(removing it from the USB port), switch the repeater from setting mode to repeater mode, and supply power to the repeater again.

(Insert into USB port) If the repeater is connected to indoor Wi-Fi, the blue light blinks in repeater mode. SETTING UP A HOTSPOT FOR A WALK [ANDROID]

STEP 01 STEP 02 STEP 03 STEP 04 SETTING UP A HOTSPOT FOR A WALK [IOS]

STEP 01 STEP 02 STEP 03 SETTING UP A HOTSPOT FOR A WALK[Android+IOS]

STEP 04 STEP 05 STEP 04 You can designate a hotspot for walking with your dog when selecting a registered repeater Please enter the hotspot information you checked earlier. AP1: Enter parental hotspot name PW: Enter parental hotspot password Please save after entering STEP 05 After the initial setting, you can just connect the repeater to the power bank and leave immediately when walking. Enjoy an exciting walk now!

SPECIFICATION Product Specification Model Battery PEACHBITE WATCH PbW-S1_KR Lithium Polymer Battery Usage Time 10 Days Charging Time 4 Hour The usage time may vary depending on the number of times the battery is used. Charging Type Micro USB 5pin Body Material PC Communication Bluetooth Strip Material Silicon Weight Large : 67g / Small 50g KC Certification R-R-mkK-PbW FCC Certification

( ) SPECIFICATION Product Specification Model Battery PEACHBITE REPEATER PbG-S2 Constant power supply Communication Wi-Fi / Bluetooth Weight Body Material 11g ABS KC Certification R-R-mkK-PbG-S2 FCC Certification

() Product A/S For questions about device repair, handling, management, and apps, contact the customer service center or the place where you purchased the device. Please receive the warranty after confirming that the purchase date and dealer information are written at the place of purchase. In the case of a paid A/S request, if there is no purchase warranty, you must present the purchase receipt specifying the product name and place of purchase. The warranty period is one year from the date of purchase. If you request repair within the warranty period, please contact the customer service center or the place of purchase. The warranty period can be applied based on the contents of the warranty or purchase details. Repair fees will be charged for breakdowns caused by customer negligence, such as damage due to impact or submersion. After the warranty period has elapsed, paid repairs are provided through the customer service center. However, if 3 years have passed since the release date of the product, repair may be difficult depending on availability of parts. Warranty Buyer Name / Contact No.:

Date of purchase / Place of purchase :

Model & Size :

WATCH ID :

REPEATER ID :

Supplied with QR code. Customer Service MAX K Inc. (USA) 9945 Warwana Rd, Houston Texas 77080 EMAIL contact@peachbite.com WEB www.peachbite.pet TEL 713-497-5012 NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement :

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 15 mm between the radiator & your body. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired operation. CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Certification designating a U.S. Agent for service of process:

As required by section 2.911(d)(7), the applicant must designate a contact located in the United States for purposes of acting as the applicants agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. In either scenario, the designation of the U.S. agent for service of process should be provided as an attachment to the equipment authorization application. The applicant must provide a written certification, which must:

i. Be signed by both the applicant and designated agent for service of process, if the agent is different from the applicant. ii. Acknowledge the applicants consent and the designated agents obligation to accept service of process. iii. Provide a physical U.S. address and email for the designated agent. iv. Acknowledge the applicants acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Unofficial information provided by FCC personnel on February 14, 2023, via the monthly call with the TCB Council:

The Agent for Process of Service:

cannot be a TCB or affiliated with a TCB (e.g. could not be a person who works for a TCB or a company that owns or is owned by the TCB) cannot be a [FCC recognised] Lab or affiliated with a test lab (e.g. could not be a person who works for a Lab or a company that owns or is owned by the Lab) Agent can be Individual Entity or a Company Entity Agent Entity must be located in US, US address/phone Entity acting as Agent must have FRN (best practice, put FRN on Agent Letter) Agent letter does not have to be FCC ID specific, can be general Agent for Grantee For devices being marketed or for which marketing has ceased for less than 1 year, if the Agent for Process of Service changes, then for every TC Number the TCB must request the FCC to put application into Audit Mode and Agent Letter needs to be updated (superseded). NOTE: The U.S. Agent for Service of Process should not be confused with the authorized agent used for signing the 731 form, other cover letters within the application, and/or the agent who may interface with the TCB. MAX K. Korea Inc. U.S. Agent Designation for Service of Process ATTENTION:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA REGARDING: FCC Certification Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Approve-IT, Inc. Contact Name: Nathan Grinager Street Address: 8011 34th Ave South, Suite 342 City/Province/Zip: Bloomington, MN 55425 Telephone No: 651-247-1678 Email: team@approve-it.net FRN #: 0027533835 This letter is to confirm that we (the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature:

Date: October 27, 2023 Signed by (Printed Name/Title): Nathan Grinager / Co-President

*This letter is valid indefinitely for all applications submitted within the period of 10/27/2023 10/27/2024. The Applicant confirms its explicit consent and acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: MAX K. Korea Inc. Grantee FRN: 0034400515 FCC ID: 2BDB6-PBG-S2 Contact Name: Insuk Park Street Address: 608, Baeksang Star Tower 2, 165, Gasan digital 2-ro, Geumcheon-gu, Seoul, Republic of Korea City/Province/Zip: Geumcheon-gu /Seoul/ 08504 Telephone No: 82-2 867-9319 Email: ispark@maxkkorea.com Applicant Signature:

Date: Oct. 27, 2023 Signed by (Printed Name/Title): Insuk Park / General Manager

MAX K. Korea Inc. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 10-27-2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BDB6-PBG-S2 MAX K. Korea Inc. (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Name: Insuk Park Title: General Manger Company: MAX K. Korea Inc. Tel # +82-2 867-9319 MAX K. Korea Inc. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 10-27-2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BDB6-PBG-S2 MAX K. Korea Inc. (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. Sincerely, Name: Insuk Park Title: General Manger Company: MAX K. Korea Inc. Tel # +82-2 867-9319

MAX K. Korea Inc. Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2BDB6-PBG-S2 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type Block Diagram Schematics Operational Description Part List File Name

[PbG-S2] BLK

[PbG-S2] SCH

[PbG-S2] OpDes

[PbG-S2] Part List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

Exhibit Type Internal Photos Test Setup Photos Manual File Name

[PbG-S2] INT Photo

[PbG-S2] Test Setup Photo

[PbG-S2] Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. Sincerely, Name: Insuk Park Title: General Manger Company: MAX K. Korea Inc. Tel # +82-2 867-9319

MAX K. Korea Inc. Oct 27, 2023 Applicant: MAX K. Korea Inc. FCC ID: 2BDB6-PBG-S2 To. Whom it may concern:

This product is only operate WLAN 802.11 n40, Bluetooth(BDR, EDR, LE1M) Sincerely, Name: Insuk Park Title: General Manger Company: MAX K. Korea Inc. Tel # +82-2 867-9319

MAX K. Korea Inc. Oct 27, 2023 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Letter of Authorization We, the undersigned, hereby authorize Kenneth Kim of NCT Co.,Ltd. to act on our behalf in all manners relating to application for equipment authorization for FCC ID: 2BDB6-PBG-S2 including signing of all documents relating to these matters. Any and all acts carried out by Kenneth Kim of NCT Co.,Ltd. on our behalf shall have the same affect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Sincerely, Name: Insuk Park Title: General Manger Company: MAX K. Korea Inc. Tel # +82-2 867-9319