|
app
s
|
Applicant Information
|
|
|
1 2 3 4 5
|
Effective |
2011-10-19
|
|
1 2 3 4 5
|
2011-09-27
|
|
1 2 3 4 5
|
Applicant's complete, legal business name |
MAXID Corp.
|
|
1 2 3 4 5
|
FCC Registration Number (FRN) |
0018448183
|
|
1 2 3 4 5
|
Physical Address |
4445 Corporation Lane
|
|
1 2 3 4 5
|
Virginia Beach, Virginia 23462
|
|
1 2 3 4 5
|
United States
|
|
|
app
s
|
TCB Information
|
|
1 2 3 4 5
|
TCB Application Email Address |
j******@acstestlab.com
|
|
1 2 3 4 5
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
1 2 3 4 5
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
|
app
s
|
FCC ID
|
|
1 2 3 4 5
|
Grantee Code |
TFT
|
|
1 2 3 4 5
|
Equipment Product Code |
533ANM
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3 4 5
|
Name |
S**** B****
|
|
1 2 3 4 5
|
Title |
Mr
|
|
1 2 3 4 5
|
Telephone Number |
75721********
|
|
1 2 3 4 5
|
Fax Number |
75721********
|
|
1 2 3 4 5
|
E-mail |
s******@maxid.net
|
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 4 5 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 5 | No |
| 1 2 3 4 5 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 5 | No |
| 1 2 3 4 5 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 12/03/2011 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 4 5 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 4 5 | Equipment Class | DTS - Digital Transmission System |
| 1 2 3 4 5 | NII - Unlicensed National Information Infrastructure TX |
| 1 2 3 4 5 | JBP - Part 15 Class B Computing Device Peripheral |
| 1 2 3 4 5 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Intel Wi-Fi Link 5300 Series |
| 1 2 3 4 5 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes |
| 1 2 3 4 5 | No |
| 1 2 3 4 5 | Modular Equipment Type | Single Modular Approval |
| 1 2 3 4 5 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
| 1 2 3 4 5 | Change in identification of presently authorized equipment. Original FCC ID: PD9533ANM Grant Date: 07/01/2008 |
| 1 2 3 4 5 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 4 5 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | Yes |
| 1 2 3 4 5 | No |
| 1 2 3 4 5 | Grant Comments | Power Output listed is Conducted. Modular approval. This module is approved for use in mobile configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.
Single Modular
Class II Change to address co-location with FCC ID: TFTWT12 and FCC ID: TFT-MC8795 inside portable host TFT-IDL750 as described in this filing. The highest reported SAR is 0.237 W/kg; the highest summation of 1-g SAR is 0.728 W/kg. |
| 1 2 3 4 5 | Power Output listed is Conducted. Modular approval. This module is approved for use in mobile configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.
This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.
Single Modular
Class II Change to address co-location with FCC ID: TFTWT12 and FCC ID: TFT-MC8795 inside portable host TFT-IDL750 as described in this filing. The highest reported SAR is 0.269 W/kg; the highest summation of 1-g SAR is 0.728 W/kg. |
| 1 2 3 4 5 | Power Output listed is Conducted. Modular approval. This module is approved for use in mobile configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.
This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.
Single Modular |
| 1 2 3 4 5 | Power Output listed is Conducted. Modular approval. This module is approved for use in mobile configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.
Single Modular |
| 1 2 3 4 5 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 4 5 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3 4 5
|
Firm Name |
Advanced Compliance Solutions, Inc.
|
|
1 2 3 4 5
|
Name |
R******** A******
|
|
1 2 3 4 5
|
Telephone Number |
770-8********
|
|
1 2 3 4 5
|
Fax Number |
770-8********
|
|
1 2 3 4 5
|
E-mail |
r******@acstestlab.com
|
|