Smart Wi-Fi/GSM Alarm System User Manual Content Product list Features/Control Panel Appearence 05 Installation of The Control Panel Status LED Indication Quick Start Guide Included Accessories PIR Motion Detector Door/Window Sensor Setup Mobile App Setup Add Device Alarm Notification Accessories Enrollment/Delete Zone Setup via App Device Setup Mobile App Other APP Settings Connecting Wired Accessories &
Linkage Electronic Failities SMS Text Operation Specification Q & A 01 02 03 08 11 13 14 17 18 19 21 22 26 29 31 32 35 The dual network security system is built to offer convenient, real-time monitoring and flawless home security. It protects your home 7/24. The control panel is the brain of security alarm system, which is able to communicate with all wireless sensors. If an intrusion is detected or if an abnormal amount of smoke is detected, it triggers an immediate alarm and send you notification by SMS, push notification and calls. Product List Please remove all supplied contents from packaging as below. If there' re anything missing, please return to your place of purchase. Control Panel Sensor Detector Door/Window P.I.R. Motion Remote Control Wall-mounted Bracket for Bracket Motion Detector Power Adapter 3M Double-sided Batteries Tape Plastic Plugs
& Screws User Manual 1 Features Working Status of Control Panel Appearance 110dB Siren White LED: Arming / Disarming Red LED: Control Panel Status 24 Hours Protection Wi-Fi + GSM, Double Safety Immediate SMS Alerts 2 3 Groups of SMS 5 Groups of Phone Call 2 Groups of Central Monitoring Station Green LED: AC Power Yellow/Red LED: GSM Signal Indicator Added on up to 50pcs Sensors iOS & Android App, Easy to Setup Tamper Switch Bracket Hole Wired Interface Enroll Button Loudspeaker SIM Card Slot Power Switch Adapter Interface 3 No Name Function Status LED Indication Sending SMS or connecting In enrolling status Red LED Normally on:
Flashes quickly:
WiFi network in smart mode Flashes once a second:
Flashes once in 2 seconds:
network in AP mode. Alarming connecting WiFi System armed in away mode. System disarmed White LED On:
Off:
Flashes slowly:
Flashes quickly:
Systems armed in stay mode. WiFi network lost. Power/Signal LED Indication Green LED On:
Off:
Power on Power off Button Tamper Switch Tamper Switch 1 2 3 beep heard: start setup with app Press 7 times: Delete all connected accessories. Press 5 timesRestore the system to default setting. Restoring operation will not delete the enrolled accessories. Enroll Button 4 Quick Start Guide 1. Installation of The Control Panel A. Gently open the battery bay cover. B. Insert a SIM card and fix it. C. Insert power adapters barrel plug to adapter socket. D. Slide the power switch to ON position. E. Testthe enrollment of accessories. A B D 1 Important:
The sim card you have purchased may not ask for a PIN. However should your SIM card requested a PIN, you can switch off the PIN request by briefly using the SIM card in a mobile phone. 5 Orange LED Flashes quickly:
Flashes normally:
Searching GSM network GSM network found C 2. Using and Testing the Remote Control(s) 4. Using and Testing the Motion Detector A. Press the panic button . A small display on the remote control will briefly light up. A loud alarm tone will immediately sound and the symbol on the control panel will flash red . B. disarm button. Congratulations!
Your remote control( s ) are working!
Turn the alarm off again by pressing the 3. Using and Testing the Door Sensor A. Pull out insulating strip. B. Arm the system with button. C. Now separate both parts of the sensor and hold them at least 5cm away from one another. A red light will briefly flash on the sensor D. As soon as the alarm sounds, disarm the control panel with on the remote control. Congratulations. The door sensor is now working!
A. Carefully open the cover of the motion sensor by pressing the clip and pull out insulating strip. B. Fix the cover by the short screw. C. Arm the system with button. D. Now press the small, black button (program) on the rear of the motion sensor. E. As soon as the alarm sounds, disarm the control panel with on the remote control Congratulations. The motion sensor is now working!
6 7 Wireless P.I.R Motion Detector Features The passive infrared sensor with novel and beautiful style, perfect streamline can be easily installed. It is designed to detect human movement indoor. Adopted advanced fuzzy logic chip and intelligent analysis distinguish signal between body movement and interference to minimize false alarms. The built-in buzzer remind you low battery state and event of tamper alarm, which ensure your safety. 9 7 8 3 2 5 6 1. Detection Window 2. LED Indicator 3. Learning Button 4. Clip 5. Battery Compartment 6. Zone Jumper 7. Buzzer 8. Tamper Switch 9. Infrared Sensor Status Indicator 1 5 LED flashed once:
Movement is detected. 5 LED flashes 5 times, and buzzer beeps 5 times:
Power on, tamper alarm, low battery indication. If its in low battrey state,please replace it only with1.5V/AA LR6 Manganese Dioxide Cell (
EXCELL, GP) immediately. TEST MODE: After switching on (inserting the batteries), the motion detector beeps and flashes five times. This shows that the detector is only in test mode and will remain in that mode, until it has recognized a movement 20 times. In test mode, every movement triggers an alarm. NORMAL OPERATION: Once the test mode has ended, the motion detector switches to normal operation and, after the first recognized movement, into sleep mode to save energy. The sleep mode ends after four minutes. This helps save considerable amounts of energy when the house or apartment is inhabited and people are constantly moving around. In case of an alarm, however, the first movement is enough to trigger an alarm. 4 Test Mode & Normal Operation Infrared Sensor: Detects the infrared rays released by human body motion. Please do not touch the surface and keep it clean. Tamper Switch:
triggered, generating an alarm signal. Once the case is opened ,the tamper switch will be 1. When the power is on, the LED indicator flashes five times and buzzer beeps five times to enter working state. 8 9 Notice Wireless Door/Window sensor 1. Avoid mounting the detector close to places where heat changes fast or air stream flows frequently. (ie. Air conditioner, tube light, oven, waver, refrigerator etc.) The Door/Window Sensor can be installed on doors, windows and any other objects that open and close. Detection Area Top View Side View 110 0m 2m 4m 6m 8m 2m 0m 10 1 3 1.Transmitter 2. Open-close magnet 3. Tamper Switch 4. Battery Compartment 2 4 Tamper Alarm: Once intruder attempts to move the sensor,built-in buzzer beeps.The control panel will send tamper alarm message to user at the first time. 11 Mobile App Download Please enter keyword download the App from the Apps store or Google Play. on your smart phone to Smart Life Working Status:
1 5 LED flashes once:
Door or window is opened. and the transmitter sends signal to the control panel. 5 LED flashes 5 times, and buzzer beeps 5 times:
Tamper alarm, low battery indication. If its in low battery state,please replace it only with1.5V/AA LR6 Manganese Dioxide Cell (EXCELL, GP) immediately. Installation:
1. Open the case and install the battery properly. 2. Sensor can be installed on door or window that open and close. Make sure the installed position have been already cleaned. Create an Account Note! The door sensor is set in Normal Zone1 as default. It will cause on immediate alarm if the magnet depart from the transmitter more than 2cm in arming state.
<1cm
<1cm 12 Smart Life 13 Add Device Add device Enter Wi-Fi Password Connecting Now Wi-Fi:Ontips Change Network This app is supported only on 2.4GHz Wi-Fi channels 21%
Make sure your phone and device are as close to your router as possible. Searching for Device Registering device to the cloud Initializing your Device 5. Device added successfully. Then you can rename the device and choose where you place the device. How to make backlight flash in red quickly ?
* Turn on the device, then press the enroll/reset button for 5 seconds X1 14 15 2 Ways to Control the Alarm System Arm the system when leaving your home. All sensors will be activated. Any sensors that are triggered will immediately sound the alarm. Disarm the system when entering your home. All sensors will be deactivated allowing you to move freely . Listen into the roon via the control panel and also speak with people in the room. Sensors that are designated in the Home Zone are deactivated, allowing you to move freely in your home. the sensors in Normal Zone will remain active and if triggered, will immediately sound the alarm. Arm Disarm Two-way Talk Home Mode Mute Mode Emergency Call Press stay into arming or disarming state in mute mode without disturbing someone. button, then press button within 3 seconds to enter arm disarm arm or
Press the SOS button in the event of an emergency. This will trigger an immediate alarm even if the system is disarmed or in Home Mode. To stop the alarm, press the disarm button on the app or remote control. You can arm, disarm and switch between security modes using:
1. Smart Life Apps 2. Remote Control Tap on device the device interface.
"X1"
, enter Through the Remote Control
(Press and hold the buttons for about 1 sec.) Arm Disarm Emergency Call Home Mode Note! Electical Facility is Off as default. To activate electrical facility, AC power of control panel must be on. Electrical Facility Control Check Event Log Alarm Event/Notification The alarm system monitors your home for activity and sends you an app push notification, calling or SMS when sensors are triggered. All events can be checked by tapping on Me-Message Center . The notification rule is as below. If Setting-Push Notification is disabled, then you will not receive app notifications when events are detected but still have calling alert and email notification. 16 17 Alarm Notification Accessories Management Push Notification SMS Call Mark Smart Alarm WiFi ON Smart Alarm WiFi OFF Phone Remote Control In the event the alarm, the alarm system will call the preset phone number, user can pick up the phone , monitor the site, and remotely control system by entering below numbers. 1
0
Disarm the system, press Arm the system in the away mode, press
Turn on AC facility, press 5
; 6 Turn off AC facility, press
Turn on on site siren, press 7 Turn off on site siren, press
; 8 Monitor the site, press key;
Press escape (#) or hang up to exit.
Tap on icon the into accessories menu, you can customise the accessory name, select the zone type,and also delte the accessory from the app, if required. Accessories Enrollment & Zone Accessories in the standard kit were enrolled by default. More accessories can be paired in two ways. You are able to pair up to 50 additional sensors, 50pcs RFID cards, 10 remote controls or keypads to the alarm system. Sensors that are included with the alarm system are already enrolled with the control panel. Press the enroll button . Step 1, Press the enroll code on touch pad or select the on the dashboard to enter the Accessories Menu, then tap on" "icon. By enrolling button Step 2, Trigger the sensors one by one, press the enroll button again or press " " icon on the app to exit the enrolling . The enrolled sensors will automatically appear in the Accessories menu in the app. 18 19 How to trigger different accessories:
Press any button on the remote control. Move the transmitter away from the magnet Press the black button on the rear of the motion sensor. 1 2 3 1 System beeps once, the LED light flashes once, the enrollment is successful. 2 If system beeps twice and the LED light flashes once, the accessories have been enrolled before. 3 If three beeps are heard and LED light flashes once, the storage is full.
(Note! Please dont press tamper switch to enroll or enroll accessory in low battery status, It will remain in enrolling mode for 30 seconds. ) Delete Enrolled Wireless Accessories Delete accessories via APP or Press the enroll button 7 times until one beep is heard, all enrolled wireless accessories will be deleted. The alarm is activated immediately when triggered.
:Low Battery 20 21 Device Setup Central Monitoring Station Setup Google Home Security Code Use the security code to disarm the alarm system via Google Home. Voice Control for Google Home Disarm "device name". Set "device name" to home mode Set "device name" to away mode Siren Duration Time User can set the siren duration from 0s to 300s, the device will be in mute when user set it 0s. Store Alarm Phone Numbers Schedule Schedule the arming and disarming of your security systems at your convenience. Time tolerance may be about +/- 30 seconds. 2. Report Upload 3. Store CMS Phone Numbers User can set 2 CMS Phone Numbers on menu of Store Phone Numbers Event Code 3401 1401 1132 1131 1100 3456 1137 1144 1140 1133 1384 1302 1301 Event Content Arm Disarm PIR Motion Sensor Alarm Window/Door Sensor Alarm Emergency call Stay Arm Detector Tamper Alarm Normal Alarm 24H Alarm Detector Low Battery Control Panel Low Battery Control Panel AC Power Lost 22 23 User can set the siren to be audible or silent when its alarming. GSM Signal Monitor Sim Card Balance SMS Access Code A Device Language Door Sensor Monitoring If you leave a door or window open when you arm the system, the alarm will send a alert notification. User can check the real-time status of which sensor is "open"
on the sensors list. 24 25 Add phone number of the one you insert in the alarm system. Other APP Settings My home Smart Tap on "Smart" to add smart scene or automation of your connected devices. For example, arm the system, and turn off the smart bulb. Or disarm the system, and then turn on the smart bulb. Or to excute the actions according to different condictions. For example, when temperature greater than 40,trigger the alarm system. Add devices Home Management Family settings: Name change/
Room managment/Family location/ Share advices Add Family/Add rooms. Room Management Add/Delete/Edit rooms Set Home Location No devices yet, please add X1 Wi-Fiti X1 Wi-Fiti 26 27 Me 1. Check the activities of the system 2. Add other services, like Alexa... Connecting Wired Accessories & Linkage Electronic Facilities 3. Write down and send us your issues or complaints or any feedback. 4. Sound: Turn on/off the sound of the key on APP. Notifictaion: Receive the push notifiction or not. LEARN V C D N G xx- xxxxxxxxxxx 1 2 3 4 28 29 Wired Interface 1 Wired Interface 2 Ground Common Port Normal Open Normal Close Power Output for Wired Accessories Ground Wired Accessories:
It supports 2 groups of wired accessories. Please choose the wired sensor types after connected. Connect Wired Sensor to Wired Zone 1 Connect N.C. Type Door Sensor to Wired Zone. One cable for the IN1 or IN2 block, another for GND block. Send text 74 to choose wired sensor type to be N.C. Test if the alarm occurs when wired sensor is trigger. Connect Wired Siren Connect the Negative Pole to GND block, the Positive Pole to N.O block. Then link COM block and +12V block. Linkage AC Electronic Facilities:
It is able to turn on electronic facilities like lights, or fences to deter the intruder immediately in the event of alarm. Note!Wired accessories need DC 12V power support.
They can't be used when only with built-in battery. Send this operation code from your cell phone SMS reply you will receive Remark __ __ Disarm 1234#0 Arm 1234#1 1234#2 AC Electrical Facility 1234#90 1234#91 43 __ 30 31 Specifications Product Name :
Wi-Fi/GSM Alarm Sytem Control Panels Power Supply :
Input: AC 110~240V/50~60Hz Output: DC 12V/1000mA GSM Working Frequency :
Standby Current :
200 mA without power supply. 150 mA when power supply on. Alarm Maximum Current 350mA Internal Battery Backup :
Lithium Battery: 3.7V/900mAh Internal siren :
90dB Allowed Amount of Expandable 10pcs remote controls Wireless Accessories 50pcs wireless accessories Operating Frequency: 2.400~2.4835GHz Wi-Fi Standards: 802.11b/g/n Radio Frequency FHSS 433MHz Housing Material ABS plastic Operation Condition:
Temperature: -20C~55C Humidity: 80%(non-condensing) Size (L x W x H) :
18012626mm Detector Dimensions(L x W x H): 24.5 x 96.5 x 19.5 mm Magnet Dimensions (L x W x H): 14 x 48 x 11 mm DC1.5V (AA 1.5V Lr6 Battery x1)(EXCELL, GP) DC1.5V (AA Battery ) FHSS 433MHz 25 70 20 70 FHSS 433MHz 32 33 x 2pcs)(EXCELL, GP) 20 30 FHSS 433MHz 2pcs 25 FHSS 433MHz All available Smart Life Apps are free to download (App Store or Google Play). The complete functionality is free. 34 35 Its 100 meters in open area. The walls might shorten the distance, its recommended to install the accessories at the right place, and move the panel to adjust a better signal receiving. If the house is too large, its better to add a signal repeater to boost the coverage. 2. Why PIR Motion detector does not detect movement?
A. Please make sure the control panel is in arming status, not at stay
(home)mode or disarming status. B. Please make sure the LED of PIR motion detector lights up when you walk in the detection area. C. Movement should cross the detection and within 8 meters range. D. The detector enters sleeping mode to save power after first detection. If there's no movement within 4 minutes, the detector goes back to the working state. If there's detection occurs within 4 minutes, the time detector goes back to working state will be added accordingly. E. Make sure the insider battery contact well or not. F. Check the board put well or not. G. If zone jumper is changed, please enroll the sensor to the system again. 3. If the PIR motion detector pet-immunity?
No. The PIR supplied in standard kit is normal PIR. If you have pets at home, please adjust the installing height to allow your pets to roam below the mounting height of the unit without causing alarms. 4. Theres no one passerby the room, but the detector trigger the alarm A. Check if there's any pet at home, the PIR supplied in the standard kit is normal one, not pet-immune one. B. Please avoid mounting the P.I.R. motion detector at the place where rapid heat changes such as window, air conditioner, light, electric heater, refrigerator, oven, stove etc. C. Avoid strong sunlight. D. The installation height and range should be in the detection area. FCC STATEMENT 1 . This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. PIR Motion Detector 1. Why PIR Motion Detector beeps without detecting intruders?
If PIR Motion Detector beeps, and LED indicator flashes continuously, the detector is in low battery. Please change the battery immediately. 36 37 RF Exposure Information:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment. 38 39 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device is acting as slave and operating in the 2.4 GHz (2412 ~2462 MHz) band. Ad Hoc function is supported but not able to operate on non-US frequencies. 40