FCC ID: 2AT9B-AV1338 Car multimedia player

9 CAPACITIVE TOUCH SCREEN 1 DIN MULTIMEDIA MECHLESS RECEIVER CAR910X AM-FM USB Media Player Rear Camera Input INSTALLATION &

OWNERS MANUAL Copyright Notes This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. SiriusXM and all related marks and logos are trademarks of Sirius XM Radio, Inc. All rights reserved. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. Use of the Apple CarPlay logo means that a verhicle user interface meets Apple performance standards. Apple is not responsible for the operation of this vehicle or its compliance with safety and regulatory standards. Please note that use of this product with iPhone, iPod or iPad may affect wireless performance. Apple CarPlay is a trademark of Apple Inc. "Made for iPod" and "Made for iPhone" mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. iPhone and iPod are trademarks of Apple, Inc., registered in the U.S. and other countries. Availability of Android Auto may vary depending upon your country and phone model. Please visit android.com/auto for more information. Android, Android Auto, Google and other marks are trademarks of Google Inc. Other trademarks and trade names are those of their respective owners. Table of Contents Warning Statement . Safety Information/Precautions . Preparation/Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wiring Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Control Locations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Audio Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AM/FM Tuner Operation . USB Operation

. Media Compatibility

. Bluetooth Operation . SiriusXM Satellite Radio Operation . SiriusXM Radio Advisory Messages . Apple CarPlay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . Android Auto . . Auxiliary Inputs/Rear Camera Operation. . SWC Input Operation . Troubleshooting . Specifications . Warranty. Page 3 4 5 6 7 8-9 10 11 12 13-14 15-16 17-20 21 22-23 24-25 26 27 28 29 30 2 WARNING Upon installation of this monitor/media player (unit) into a vehicle, the driver of the vehicle must not operate this unit by watching videos or playing video games while driving. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicles occupants or persons outside the vehicle and/or property damage. Several states prohibit the installation of monitors/media players if the screen is visible from the drivers seat. If you reside in a jurisdiction which has enacted such a law, this unit must not be installed so that the screen is visible from the drivers seat. When installing this unit in the front console/dashboard, the unit must be positioned so that it is facing the front passenger seat only. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicles occupants or persons outside the vehicle and/or property damage. This unit is designed so that it may be operated only when the vehicle is in Park and the parking brake is fully engaged. To this end, this unit includes a parking brake lock-out feature which prohibits the unit from operating if the vehicle is not in Park and/or the parking brake is not fully engaged. When installing this unit, the installer must connect the parking brake detect wire to the parking brake mechanism in order to make the parking brake lock-out feature operable. DO NOT simply ground the parking brake detect wire to a metal portion of the vehicle. Failure to properly install the parking brake lock-

out feature could lead to driver distraction which could result in serious injury or death to the drivers occupants or persons outside the vehicle and/or property damage. Once the parking brake lock-out feature is installed, the owner/user must not attempt to disrupt/neutralize the parking brake lock-out feature by (a) partially engaging the parking brake and/or (b) purchasing/using any device or unit designed to send necessary brake signals to the unit. Failure to follow these instructions could lead to driver distraction which could result in serious injury or death to the drivers occupants or persons outside the vehicle and/or property damage. When operating this unit, keep the units volume level low enough so that the vehicles occupants can hear traffic-related sounds such as police and emergency vehicles. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicles occupants or persons outside the vehicle and/or property damage. 3 Safety Information Please read all instructions carefully before attempting to install or operate. Due to its technical nature, it is highly recommended that your JENSEN CAR910X is installed by a professional installer or an authorized dealer. This product is only for use in vehicles with 12VDC negative ground only. To prevent damage or injury:

Make sure to ground the unit securely to the vehicle chassis ground. Do not remove the top or bottom covers of the unit. Do not install the unit in a spot exposed to direct sunlight or excessive heat or the possibility of water splashing. Do not subject the unit to excessive shock. When replacing a fuse, only use a new one with the prescribed rating. Using a fuse with the wrong rating may cause the unit to malfunction. To prevent short circuits when replacing a fuse, disconnect the wiring harness first. Use only the provided hardware and wire harness. You cannot view video while the vehicle is moving. Find a safe place to park and engage the parking brake. If you experience problems during installation, consult your nearest JENSEN dealer. If the unit malfunctions, reset the unit as described on page 10 first. If the problem still persists, consult your nearest JENSEN dealer or call tech assistance @ (888) 921-4088. To clean the monitor, wipe only with a dry silicone cloth or soft cloth. Do not use a stiff cloth, or volatile solvents such as paint thinner and alcohol. They can scratch the surface of the panel and/or remove the printing. When the temperature of the unit falls (as in winter), the liquid crystal inside the screen will become darker than usual. Normal brightness will return after using the monitor for a while. When extending the ignition, battery or ground cables, make sure to use automotive-grade cables or other cables with an area of 0.75mm (AWG 18) or more to prevent voltage drops. Do not touch the liquid crystal fluid if the LCD is damaged or broken. The liquid crystal fluid may be hazardous to your health or fatal. If the liquid crystal fluid from the LCD contacts your body or clothing, wash it off with soap immediately. FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 4 Preparation Before You Start Disconnect negative battery terminal. Consult a qualified technician for instructions. Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration. 7 M5.0X6.0MM 1 1 3 0 . 5 i n h c B 0 i n h c A h c 1 i n C 4 5 2 0 i n h c A 0 . 5 i n h c B 1 i n h c C 6 M5.0X8.0MM 7 3 90 90 1 3 2 4 1(25mm) 1/2(12mm) Flush 5 Wiring Diagram - Inputs/Outputs CarPlay and Android Auto 18PIN V 2 1

A R E M A C N I

A R E M A C D N G

R N I

V A L

N I

V A N I

O E D V I L

T N O R F

T U O

E N L I R

T N O R F

T U O

E N L I L

R A E R

T U O

E N L I

R R A E R

T U O

E N L I 1

R E F O O W B U S

2

R E F O O W B U S

K C A L B D E R K C A L B K C A L B K C A L B K C A L B K C A L B K C A L B Y A R G Y A R G K C A L B K C A L B W O L L E Y E T I H W D E R W O L L E Y E T I H W D E R E T I H W D E R E U L B E U L B 20PIN

N O I T I N G I

V 2 1 C C A

D N U O R G N O I T A N M U L L I I

Y R E T T A B

E S R E V E R

T N O R F T F E L E T I H W

T N O R F T F E L K C A L B

E T I H W

T N O R F T H G I R Y A R G

T N O R F T H G I R K C A L B

Y A R G

R A E R T F E L N E E R G

R A E R T F E L K C A L B

N E E R G

R A E R T H G I R T E L O I V

R A E R T H G I R K C A L B

T E L O I V

D N U O R G S I S S A H C

N O I I T A N M U L L

2 1 Y R E T T A B

A N N E T N A R E W O P

E K A R B G N K R A P I W O L L E Y E G N A R O K C A L B E U L B K N P I

E S R E V E R E T I H W

T E L O I V

N O

N R U T E T O M E R E T I H W

E U L B

V 2 1

N O I T I N G I D E R Note:

When replacing a fuse, make sure to use the correct type and amperage. Using an incorrect fuse could cause damage. The unit uses (1) 15 amp ATC mini style fuse located on the power connector. Wiring Notes:

Subwoofer output The Subwoofer preamp audio output (Blue jacket with Black RCA) is active in all audio modes. Rear camera input A rear view camera (not included) can be used with the Camera input. SiriusXM For more information on how to install the SiriusXM Connect Vehicle tuner, consult the installation guide included with the tuner(SiriusXM connect tuner and subscription sold separely). N I

C W S T U P N I C W S

) P A C D E R

Y A R G 6 Control Locations 1 2 3 4 5 6 The radio display features the following functions and displays:

1 2 3 4 5 6 Voice Activation Button SOURCE/HOME Power/Volume/Mute Previous Button Next Button RESET / USB Port 7 General Operation Power On/Off Momentarily press unit off. to turn the unit on. Press and hold to turn the Volume Rotate the volume knob to increase or decrease the volume level. Mute Mode Momentarily press MUTE to silence the audio. Momentarily press MUTE again to return to the previously selected volume. Rotating the volume knob while the volume is muted will also cancel the mute function. Press MODE at the top left corner of the screen to display the main menu. Radio/USB/SXM/BT Phone/Android Auto/CarPlay/AV In/BT Audio/

Equalizer/Settings Note: Modes of operation can also be accessed by selecting the corresponding icon from the main menu. Main Menu Operation Mode Selection: Press the screen to display the OSD main menu. Press the Radio/USB/SXM/BT Phone/Android Auto/CarPlay/AV In/BT Audio/Equalizer/Settings in the Main meu pate to select the desired source. icon at the top left corner of the Dimmer Press the icon to adjust the brightness. A/V In Connect external audio/video devices to the rear RCA Type A/V Input USB Insert a USB flash drive to play MP3/FLAC/MP4/Xvid files. Reset To resolve abnormal operation or if the unit is inoperable, Press the RESET button located behind the front panel directly under USB port. The unit will reset the main processor to the default settings. Note: Use the tip of a pen to access the reset button. To restore the factory default software settings. 8 General Operation Setup Menu From the Main Menu screen, select Setup to access the Settings menu and select from eight categories represented by the icons on the top of the screen: General, Audio, Display, Others. Select the category, and adjust any of the available options using the touch screen. Adjust the date and time- Day, Month, Year, Hour, Minute and Format. Time Format- Select between 12-Hour and 24-Hour Time Format. Beep Tone - Turn the Beep Tone On or Off. Radio Region - Select Radio Region. Equalizer-Select between the following EQ presets: Default, User, Classic, Rock, Jazz, Electric, Pop, Soft (allows user to enter custom EQ settings). Time Alignment-To adjust time correction settings selectSurround1 Surround2orSurround3. Loudness - Touch screen button to turn the Loudness function on/off. Subwoofer Control - Touch the button to turn the Subwoofer Control Subwoofer Gain - Select subwoofer -15 to 0 ( -6 is default ). Brightness- Press > or < to adjust to desired level. (O Minimum/20 maximum: Day: 20 is default, Night: 6 is default). Dimmer Mode- Press > or < to adjust to change the mode (Auto/Day/

General:

Audio:

On/Off. Display:

Night). Others:

Factory Default-Reset Bluetooth Settings or Reboot System (Including SiriusXM data reset) . System Version-Displays software version of unit . 9 Audio Operation Equalizer Menu From the Main Menu screen, Press the Equalizer icon on the main menu screen to adjust Fader and Balance controls, Equalizer (8-Band Tone Control and 8 Presets EQ Settings). Time Alignment Menu 2 3 1 2 3 4 Surround Presets Time Delay Setting Speaker Positions Reset to Default Settings 1 4 ADJUSTMENTS:

TO PROPERLY SET THE TIME ALIGNMENT, YOU WILL NEED MEASURE THE DISTANCE FROM EACH SPEAKER (IN ft) TO WHERE YOU WANT THE CENTER STAGE TO BE. FOR EXAMPLE, IF YOU WANT THE POSITION TO BE AT THE DIVERS SEAT, THEN MEAUSRE EACH SPEAKER SIDE (FRONT

& REAR) TO WHERE YOUR HEAD IS LOCATED AND SET THE DISTANCE ACCORDINGLY. EACH VEHICLE WILL VARY IN DISTANCE, SO SETTINGS WILL BE DIFFERENT IN EACH CASE. 10 AM/FM Tuner Operation 1 2 3 4 5 6 7 11 10 9 8 Radio Operation From the main menu, touch Radio icon on the screen to select AM/

FM tuner mode. Main Menu 1 Press icon to return to Main Menu screen. Current Mode Indicator 2 Display status of various tuning functions including Auto. Preset Stations 3 To store a station as a preset in the current band, tune to the desired station, then press the desired preset number from the list. Press any preset in the list to recall and begin playback of that station.

(Hold this button down for a few seconds and it will switch between AS and PS) Local / Distance 4 Press DX/LOC text to turn on the local or distance. AS/PS 5 Keypad 6 Auto Store Presets: Press and hold AS/PS to automatically program the FM(18)/AM(12) available into the presets in the current Band. Preset Scan: Press AS/PS to scan through all tunable presets in the current band and play them for 3 seconds each. Direct Search Keypad. EQ 7 Press the icon to adjust Equalizer setting. Seek Tune Up 8 Press to automatically tune to a higher frequency. Seek Tune Down 9 Press to automatically tune to a lower frequency. AM 10 FM 11 Press to toggle between 2 AM bands. Press to toggle between 3 FM bands. 11 USB Operation 1 2 3 4 5 6 7 10 9 8 USB From the main menu, touch the USB icon on the main screen. Main Menu 1 Press icon to return to Main Menu screen. Current Mode Indicator 2 Displays source currently playing. List 3 Repeat 4 Random 5 Search 6 EQ 7 icon to access a list of all files and folders on the device. to access the root directory Press

- Press

- Press a folder name to access that folder, and press the file list

- Use the up and down arrows to navigate the file list

- Press the "

" arrow to return to the previous screen. to return to Press the current folder. Touch RPT again to exit repeat mode. icon to repeat current track and adjust to repeat all tracks in Press shuffle all tracks. Touch icon to shuffle all tacks in the current folder. and again to icon again to exit Repeat mode. Press icon to search a music file. Press the icon to adjust Equalizer setting. Track Up 8 Press icon to skip ahead to the next song Play / Pause 9 Press icon to pause or resume playback. Track Down 10 Press icon to return to the beginning of the current track. 12 Media Compatibility File Type File System FAT FAT 12 FAT 16/FAT 32

.mp3/.MP3/.Mp3/.mP3/.flac/ogg/.MP4/.Xvid File Extension MPEG Format Sampling Frequency Bitrate Other Information

.rmp/.m4a MPEG 1 MPEG 2 MPEG 2.5 MPEG 1 MPEG 2 MPEG 2.5 MPEG 1 MPEG 2 MPEG 2.5 Directory Depth File Name Length Total File Number Total Folder Number File Number via Folder MP3 ID3 TAG ver.1.x ver.2.x Title, Artist, Album MP3 X X 32/44.1/48kHz 12/16/22.05/24kHz 8/11.025/12kHz 32 ~ 320kbps 8 ~ 160kbps 8 ~ 160kbps Unlimited 32 bytes 2000 files 200 folders 2000 files Notes:

Due to ongoing technological advancement, some USB flash drives may be incompatible with this unit. 13 Media Compatibility Media Compatibility The following types of files are not compatible:

MP3 PRO format, MP3 playlists RMP format AAC, protected AAC, M4A format Playback Order MP3 playback sequence begins in the root folder of the USB device. Any empty folders or folders that do not include MP3 files are skipped. Compatible Recording Formats ISO9660 standards:

Maximum nested folder depth is 8 (including the root folder). Valid characters for folder/file names are letters A-Z (all caps), numbers 0-9, and _ (underscore). Some characters may not be displayed correctly, depending on the character type. This device can play back files in Joliet and other standards that conform to ISO9660. MP3 written in the formats other than the above may not play and/

or their file names or folder names may not be displayed properly. Notes Some files may not play or be displayed correctly, depending on sampling rates and bit rates. For best results, use the following settings when ripping MP3 files:

128kbps or higher constant bit rate 44.1kHz or higher sampling frequency 14 Bluetooth Operation 1 2 3 10 9 4 5 6 7 8 Before using Bluetooth Before you can use a Bluetooth device to make hands-free calls or stream audio. it must be authenticated. This is also referred to as

"pairing" a device. Pairing a New Device The unit broadcasts the pairing signal constantly when no devices are currently connected. Complete the pairing sequence from your Bluetooth device. Refer to the owner's manual for your device for more details. The device name is "CAR910X". The unit can be in any mode of operation when pairing is performed. On certain phones, pairing may need to be done more than once. Connect The head unit will automatically connect to the last connected device when the connect feature is set to Auto connect On. If the connect feature is set to Auto Connect Off, the head unit will not automatically connect to any device. Bluetooth Phone From the main menu. touch the Bluetooth on the screen. Bluetooth icon will appear anytime a Bluetooth device is connected. Main Menu 1 Press icon to return to Main Menu screen. Current Mode Indicator 2 Displays current mode of operation. Bluetooth Status indicator 3 When Bluetooth is On and a Bluetooth device is being paired. the indicator will flash. When Bluetooth is On and a phone is connected to the unit. the indicator will illuminate steady. Phone Book 4 Press "CONTACTS" to access phone book menu. Call Log 5 Press the Call Log to show( Dialed, Missed and Received Calls ). 15 Bluetooth Music 6 Bluetooth Operation Press MUSIC to transfer audio between the unit and mobile phone. Setup 7 Press "SETUP" to access Bluetooth settings. Call 8 Dial a number and touch the Phone icon to call. Phone Keypad 9 Use the keypad to dial a phone number. Devices 10 Press the DEVICES to show the pairing device list. To connect to a previously connected device. press the current device name. Any previously connected devices that are in rang will be listed by their device name. Press the desired device name to disconnect from the current device and connect to the new device. 11 12 13 14 15 16 17 18 Microphone 11 Turn the Microphone voice On or Off. Audio Transfer Button 12 Press to transfer audio between the unit and mobile phone. Keypad 13 Press to return to the Keypad screen. End Call 14 Press the End icon on screen or the End button on the front Panel to end a call in progress or o reject an incoming call. Track Down 15 Press icon to return to the beginning of the current track. Play / Pause 16 Press icon to pause or resume playback. Track Up 17 Touch icon to skip ahead to the next song. EQ 18 Press the icon to adjust Equalizer setting. 16 SiriusXM Satellite Radio Operation SiriusXM Radio Activating SiriusXM Radio Only SiriusXM Satellite Radio brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio. A SiriusXM Vehicle Tuner and Subscription are required. For more information, visit www.siriusxm.com. After installing your SiriusXM Connect Vehicle Tuner and antenna, power on your radio and select SiriusXM mode. You should be able to hear the SiriusXM preview channel on Channel 1. After you can hear the Preview channel, tune to Channel 0 to find the Radio ID of your tuner. The In addition. Radio ID is located on the bottom of the SiriusXM Connect Vehicle Tuner and its packaging. Note: SiriusXM Radio ID does not include the letters I, O, S or F. In the USA, activate online or by calling SiriusXM Listener care:

Visit www.siriusxm.com/activatenow Call SiriusXM Listener Care at 1-866-635-2349 For Canadian Subscriptions, please contact:

Visit www.siriusxm.ca/activatexm Call XM customer Care at 1-877-438-9677 Activation typically takes 10-15 minutes, but may take up to one hour. It is recommended to leave your vehicle on until the Subscription Updated message appears. Your radio will need to be powered on and receiving the SiriusXM signal to receive the activation message. Once activated, you can tune to channels in your subscription plan. Accessing SiriusXM Radio From the Main Menu, touch the SiriusXM icon to access SiriusXM mode and begin operation. 17 SiriusXM Satellite Radio Operation 1 2 3 4 5 6 Main Menu 1 Press icon to return to Main Menu screen. Band 2 Touch to select a band of preset channels. Three bands are available:SXM1, SXM2, and SXM3. Each band can store up to six pre-

set channels. (Preset channels are accessed from the List icon.) Current Mode Indicator 3 Displays current mode of operation. Program Information 4 Displays program information such as channel name, artist name and song title. Search 5 Press to enter search mode, then press Channel to choose between the following search options: Channel, Artist, Song Title or Info. Use the up/down arrows on the left side to navigate categories, and use the up/down arrows on the right side to navigate channels, artists, song titles or info. Preset Channel List 6 Press to display a list of preset channels in the current band. Category & Channel Preset Channel List 18 SiriusXM Satellite Radio Operation 7 Additional Options Additional Options 7 Press to display/adjust the options Mode, Tune Scan and Go to Live:

Mode - Press to access and adjust the following options:

Parental Code - When enabled, the Parental Control feature requires you to enter a passcode to tune to the locked channels. Press "Change" to change the parental code. Follow the prompts to enter the current code, then enter and confirm the new code. The default code for the unit is "0000". Parental Control - The Parental Control feature allows you to limit access to any SiriusXM channels, including those with mature content. Select a Parental Control option: Off (turns Parental Control off) Mature (locks all mature channels) or User (allows the user to lock specific channels using the Parental Lock Channel feature). Enter the Parental Code when prompted to confirm the change. Parental Lock Channel - Press "SET" to select specific specific channels to lock. Press "All Clear" to clear all locked channels. Channel Skipping - Press "SET" to select channels to skip. TuneStart - Press "ON" or "OFF" to enable or disable TuneStart. With the TuneStart feature turned ON, you will hear the beginning of the song when you tune to one of your Preset channels. It may take a minute or two for the feature to work after power up or after changing preset bands. TuneScan Press TuneScan button to initiate the TuneScan function. The unit plays samples from the start of multiple buffered songs from each of the Preset Channels that predominantly play music selections,. This gives the user easy access to a large sampling of music content, and they can enjoy hearing a full song when stopping the scan on a song of interest. Pressing TuneScan again will stop the TuneScan functionand continue playing the song currently being scanned.Pressing and holding the TuneScan button cancels the TuneScan and returns the user to the original channel that was tuned when TuneScan was first initiated. Go to Live- Press to resume play of live broadcast while in Replay mode. 19 SiriusXM Satellite Radio Operation 8 9 10 11 12 13 14 Preset Buttons 8 Press and hold any preset button (1-6) to save the current station as a preset. Press the desired preset button to begin playback of the corresponding preset channel. Direct 9 Press to display screen for direct channel access. Press the desired channel number, then press Enter. Playback of desired channel will begin. Channel Down 10 Press to go back to the previous channel. Channel Up 11 Press to advance to the next channel. Tune / Track Down 12 Press to enter Replay mode. Once in Replay mode, press to skip to the previous track or press and hold to fast reverse. Play / Pause 13 Press to pause and replay contect from the active channel. Tune / Track Up 14 Press to skip to the next track. Press and hold to fast forward. Press repeatedly to "catch up" and resume live play. Selecting Go to Live under Additional Options will also resume live play. 20 SiriusXM Radio Advisory Messages SiriusXM Advisory Message Recommendation Check Antenna Check Tuner No Signal Subscription Updated Channel Unavailable Channel Unsubscribed 1. The radio has detected a fault with the SiriusXM antenna. The antenna cable may be either disconnected or damaged. 2. Verify that the antenna cable is connected to the SiriusXM Connect Vehicle Tuner. 3. Inspect the antenna cable for damage and kinks. Replace the antenna if the cable is damaged. 4. SiriusXM products are available at your local car audio retailer or online at www.shop.siriusxm.com. 1. The radio is having difficulty communicating with the SiriusXM ConnectVehicle Tuner. The tuner may be disconnected or damaged. 2. Verify that the SiriusXM Connect Vehicle Tuner cable is securely connected to the radio. 1. The SiriusXM Connect Vehicle Tuner is having difficulty receiving the SiriusXM satellite signal. 2. Verify that your vehicle is outdoors with a clear view of the sky. 3. Verify that the SiriusXM magnetic mount antenna is mounted on a metal surface on the outside of the vehicle. 4. Move the SiriusXM antenna away from any obstructions. 5. Inspect the antenna cable for damages and kinks. 6. Consult the SiriusXM Connect Vehicle tuner installation manual for more information on antenna installation. Replace the antenna if the cable is damaged. SiriusXM products are available at your local car audio retailer or online at www.shop.siriusxm.com. The radio has detected a change in your SiriusXM subscription status. Press

1-866-635-2349 if you have questions about your subscription. In Canada, visit www. siriusxm.ca or call 1-877-438-9677 if you have questions about your subscription.

>> to clear the message. In the USA, visit www.siriusxm.com or call The channel that you have requested is not a valid SiriusXM channel or the channel that you were listening to is no longer available. You may also see this message briefly when first connecting a new SiriusXM Connect Vehicle tuner. Visit www.siriusxm.com for more information about the SiriusXM channel lineup. The channel that you have requested is not included in your SiriusXM subscription package or is no longer included in your SiriusXM subscription package. In the USA, visit www.siriusxm.com or call 1-866-635-2349 if you have questions about your subscription. In Canada, visit www.siriusxm.ca or call 1-877-438-9677 if you have questions about your subscription. Channel Locked The channel that you have requested is locked by the radio's Parental Control feature. Refer to the SiriusXM Satellite Radio Operation section for more information on the Parental Control feature and how to access locked channels. No Content TuneScan is not available. Please allow the tuner some time to buffer new songs to scan. Invalid Lock code If Invalid Lock code message displayed on the screen, it will disappears automati-

cally after three seconds. And then user can insert the passwordb again. 21 Apple CarPlay Operation Apple CarPlay is a smart interface for iPhone, allowing you to voice-control (via Siri) music, navigation, phone and messaging apps - significantly reducing driver distraction. Phone - Use Siri to make calls, return missed calls, listen to voicemail messages, and view the caller ID on the receivers screen. Messages - Ask Siri to send, read, and reply to text messages. This hands free operation minimizes distraction and allows you to keep hands on the wheel and eyes on the road. Music - Access music by artist, song, playlist, and more through the receivers touchscreen or via Siri. The receiver will mirror the iPhone screen with artist and track information. Maps - Use Siri to request turn-by-turn directions search by address or points of interest. Apple Maps will be mirrored on the screen, including traffic information and estimated time to destination. Compatible Devices Made for iPhone models:

iPhone 11 Plus, iPhone 11, iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8, iPhone 8 Plus, iPhone 7, iPhone 7 Plus, iPhone 6, iPhone 6S Starting Apple CarPlay Connect an iPhone to the receiver's USB port using a Apple Certified Lightning cable (not included). Apple CarPlay will launch automatically. The familar applications will appear on the receiver's touchscreen to activate Siri voice control. Note: For safety reasons, CarPlay features are limited while driving and will vary with each CarPlay-enabled app. Available functions are determined by each individual app provider. For more information, visit www.apple.com/ios/carplay. Note: Certain iPhone functions may be illegal while driving in your location. Be sure to familiarize yourself with local and state laws regarding mobile devices. When in doubt, stop and park your vehicle before using any devices. 22 Apple CarPlay Operation When the CarPlay menu is displayed, the home button in the lower left corner work just like the home button on your iPhone. Press and hold it to summon Siri and begin your voice commands. At any time during CarPlay operation, you can press this button momentarily to return to the main CarPlay menu screen. Press any Application button on the main CarPlay menu to access that operation directly. The toolbar on the left side of the screen displays the time, signal strength and shortcuts to the most popular applications - Phone, Music and Navigation - so they can be accessed quickly and easily without returning to the main menu. Controlling Apple CarPlay The following basic controls will operate many standard CarPlay features. Touch - Briefly press the desired option. Swipe - Briefly swipe in the desired direction. Drag - Press, hold and drag to the desired location. Note: There is no need to pair your iPhone when using CarPlay. This will occur automatically when connecting an iPhone to the unit's USB port. Note: When CarPlay is in use, the unit's Bluetooth will turn off automatically and hands-

free functionality will operate through the CarPlay feature. Any other devices connected via Bluetooth will be disconnected during CarPlay use. Exiting Apple CarPlay Disconnecting your iPhone will automatically exit CarPlay mode. To exit CarPlay mode while your phone is still connected, press the Power/Volume knob momentarily, and the unit's main menu will be displayed. 23 Android Auto Operation Android Auto brings the most useful apps to your phone screen or your compatible car display, in a format that makes it easy for you to keep your main focus on driving. You can control things like navigation and maps, calls and text messages, and music. Google Assistant With your Google Assistant on Android Auto, you can keep your eyes on the road and your hands on the wheel while using your voice to help you with your day. Simply say, Ok Google, or in compatible cars, long press the voice control button on your steering wheel. Navigation Get real-time traffic alerts to avoid hazards, speed traps, and find the fastest route. Or take a break and find a bite along the way. Calls & Messages Your Google Assistant lets you stay connected while youre driving. Your Assistant can help you call phone numbers from your contacts, chat with your favorite apps, read your messages aloud and text back, keeping your hands on the wheel. Compatible Devices Android Auto requires the Android Auto app from Google Play installed on an Android smartphone running Android Lollipop 5.0 or higher. Warning:

Certain uses of the smartphone may not be legal while driving in your jurisdiction, so you must be aware of and obey any such restrictions. If in doubt as to a particular function, only perform it while the car is parked. No feature should be used unless it is safe to do so under the driving conditions you are experiencing. Starting Android Auto Connect an Android Auto compatible device to the unit via USB cable. Android Auto will launch automatically, or it can be accessed at any time from the main menu. Note: When the device for Android Auto is connected to this unit, the device is also connected via Bluetooth at the same time. If five devices are already paired, the message confirming whether to delete the registered device is displayed. If you want to delete the device, touch [Agree]. If you want to delete other device, touch [BT Settings] and delete the devices manually. Note: If Android Auto is turned on during a call on a cellular phone other than the Android Auto compatible device, the Bluetooth connection will switch to the Android Auto compatible device after the call. 24 Android Auto Operation Using Android Auto The Android Auto home screen displays personalized information, like time to your destination, reminders, recent calls incoming messages, the song you're listening to, and Google Now cards. When the Android Auto menu is displayed, you can say "OK Google" or select the microphone in the upper right corner to talk to Google. 1 2 3 4 1 2 3 4 Android Auto Home Button Recent Apps Notification Button Activate Google Assistant Exiting Android Auto To exit Android Auto, press the Exit button. Disconnecting your Android phone will automatically exit Android Auto mode. 25 Rear RCA Input A/V IN Connect an optional audio/video source into the RCA (rear) input. Adjust volume on the external audio source as needed (if connected to the headphone output of the device). Rear Camera Operation - (Optional) Using Rear Camera Auto Selection Connect an optional rear camera to the Camera Input (Black RCA connector). Refer to the wiring diagram for details. The unit will automatically select camera mode when connected to the reverse lamp circuitry. Note: The external video output is not active when using the rear camera input. 26 SWC Input Operation The built-in SWC Interface is compatible with 3rd party steering wheel control modules. Either the PAC SWI series or Axxess ASWC-1 are recommended. These adapters must be used in order for the CAR910X to be compatible with any steering wheel controls. The following controls are available for most vehicles. 4. Seek/Track Down (-) 7. Volume Down (-) 10. BT End 1. Reset 2. Mode 5. Mute 3. Seek/Track Up (+) 6. Volume Up (+) 8. Band 9. BT Talk Note: Not all OE steering wheel functions may be supported by the CAR910X. 3.5mm SWC port located on the rear of the unit, on the MAIN POWER I/O Harness. AXXESS Installation Hints The ASWC-1 is auto programing for most vehicles. For full details,follow the AXXESS vehicle info and programing from their website at: https://axxessinterfaces.com/product/

ASWC-1#vehicle-specific. PAC SWI-RC Installation Hints 1. Set "Radio Select Switch". Set the SWI-RC to position 7 - "Pioneer/Other/Sony". 2. To program, use the Pioneer/Sony/Other radio function mapping order for JENSEN units. 3. When programming the SWI-RC, if a function is not supported (or not desired), then the function MUST be skipped as per the PAC SWI-RC instructions. 4. The SWC function MUST be programmed in the correct order per the PAC SWI-RC radio function mapping order instructions. SWI-RC (3.3VDC Reference) Center Pin (Ring) Voltage

(Function Select) Tip Pin Voltage Function Order 1 2 3 4 5 6 7 8 9 10 27 Seek + / Track +

Seek - / Track -

Function Mapping Reset Mode Mute Volume +

Volume -

Band BT Talk BT End H 3.3v H 3.3v H 3.3v H 3.3v H 3.3v H 3.3v L 0.0V L 0.0V 0.6 1.81 1.01 2.07 2.32 2.73 0.60 1.01 Troubleshooting General Problem Cause Action Unit will not turn on

(no power) Unit has power

(but no sound) Yellow wire not connected or incorrect voltage Red wire not connected or incorrect voltage Check connections for proper voltage (11~16VDC) Black wire not connected Check connection to ground Fuse blown Replace fuse(s) Speaker wires not connected Check connections at speakers One or more speaker wires touching each other or touching chassis ground Insulate all bare speaker wires from each other and chassis ground Unit blows fuse(s) Speaker wires touching chassis ground Check for pinched wire Yellow or red wire touching chassis ground Check for pinched wire Incorrect fuse rating Use fuses with correct rating Unit has audio

(but no video) Parking brake safety circuit not connected Parking brake not applied Check connections at parking brake Apply parking brake as described on page 26 For Your Records Please keep your original sales receipt and be prepared to provide this receipt in the event you require service, as your original receipt is considered the best proof of purchase and indicates the date you purchased your JENSEN product. Dealer Name Dealer Phone Purchase Date Register Your Product Register your product online at www.jensenmobile.com. 28 Specifications FM Tuner Tuning range: 87.5MHz-107.9MHz Usable sensitivity: 10dBf 50dB quieting sensitivity: 20dBf Stereo separation @ 1kHz: 38dB Frequency response: 30Hz-13kHz AM Tuner Tuning range: 530kHz-1710kHz Usable sensitivity: 24uV Frequency response: 30Hz-2.3kHz Front USB Compatibility: High Speed USB 2.0 USB Class: Mass storage class Monitor Panel size: 9 diagonal measurement View angle (up/down/left/right): 50/70/70/70 Resolution: 1024 (H) x 600 (V) Brightness (cd/m2): 500 NITS Contrast ratio: 500:1 Pixels: 1,152,000 General Speaker output impedance: 4 ohms Line output voltage: 4 volt RMS Line output impedance: 200 ohms Chassis dimensions: 7" x 7" x 2" (W x D x H) Design and specifications subject to change without notice. CEA-2006 Power Standard Specifications

(reference: 14.4VDC +/- 0.2V, 20Hz~20kHz) Power Output: 16 Watts RMS x 4 channels at 4 ohms and < 1% THD+N Signal to Noise Ratio: 80dBA (reference: 1 watt into 4 ohms) 29 Limited One Year Warranty This warranty gives you specific legal rights. You may also have other rights which vary from state to state. What to do?

1. Before you call for service, check the Namsung America Inc warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one year from the date of the original purchase. Namsung America Inc agrees, at our option, during the warranty period, to repair any defect in material or workmanship or to furnish an equal new, renewed or comparable product (whichever is deemed necessary) in exchange without charges, subject to verification of the defect or malfunction and proof of the date of purchase. Subsequent replacement products are warranted for the balance of the original warranty period. troubleshooting guide in your owners manual. A slight adjustment of any custom controls may save you a service call. 2. If you require service during the warranty period, you must carefully pack the product (preferably in the original package) and ship it by prepaid transportation with a copy of the original receipt from the retailer to an authorized service center. 3. Please describe your problem in writing and include your name, a return UPS shipping address

(P.O. Box not acceptable), and a daytime phone number with your shipment. Who is covered? This warranty is extended to the original retail purchaser for products purchased from an authorized JENSEN dealer and used in the U.S.A. 4. For more information and for the location of the nearest authorized service center please contact us by one of the following methods:

What is covered? This warranty covers all defects in material and workmanship in this product. The following are not covered: software, installation/

removal costs, damage resulting from accident, misuse, abuse, neglect, product modification, improper installation, incorrect line voltage, unauthorized repair or failure to follow instructions supplied with the product, or damage occurring during return shipment of the product. Specific license conditions and copyright notices for the software can be found via www.jensenmobile.com. Warranty Coverage Limited 1-year warranty when purchased from an authorized Jensen dealer. or Limited 2-year warranty when purchased from and professionally installed by an authorized Jensen dealer. (Proof of purchase and Installation required) Call us toll-free at (888) 921-4088 E-mail us at cs@jensenmobile.com Exclusion of Certain Damages: This warranty is exclusive and in lieu of any and all other warranties, expressed or implied, including without limitation the implied warranties of merchantability and fitness for a particular purpose and any obligation, liability, right, claim or remedy in contract or tort, whether or not arising from the companys negligence, actual or imputed. No person or representative is authorized to assume for the company any other liability in connection with the sale of this product. In no event shall the company be liable for indirect, incidental or consequential damages. 30 Customer Support 1-888-921-4088

(Monday-Friday, 9AM-5PM EST) Visit https://www.jensenmobile.com Designed and Engineered in USA Namsung America Inc. 2021 Namsung America Inc. All rights reserved. All rights reserved. No part of this publication may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical methods, without the prior written permission of NAMSUNG AMERICA INC. NSA0121

MODEL CAR910X This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2AT9B-AV1338 CarPlay and Android Auto 8 2 7 2 0 4 1 1 7 8 0 4 MODEL CAR910X This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2AT9B-AV1338 CarPlay and Android Auto 8 2 7 2 0 4 1 1 7 8 0 4

C5266091_X10_Ed.1 MAXMADE AUTO ELECTRONICS CO., LTD. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 1/22/2021 Subject: Request for Confidentiality FCC ID: 2AT9B-AV1338 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFRO.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Short-Term Confidentiality | Confidentiality |

ID Label/Location No No Attestation Statement No No External Photos No ;

Block Diagram Ee] [

Schematics ea C Test Report No No Test Setup Photos No ;

Users Manual Internal Photos Parts List / Tune Up RF Exposure Info O Operational Description es Cover Letter(s) No No SDR Software / Security Info L No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Chester tg Name: Chester Yang Date: 1/22/2021 Title: Director 1/1

Applicant: MAXMADE AUTO ELECTRONICS CO., LTD. Discrepancy Declaration Product name:Car multimedia player Model NameCAR910X, XD1CPA9, J1CA9, DCPA91, DCPA901, CAR910, XD2CPA9, J2CA9, DCPA92, DCPA902, CAR920, J1CA9X, DCPA91X, DCPA901X, AVM2209S, DCPA902X, CAR920X The above products are applied for FCC ID certification . All the model are the same circuit and RF module, except the packaging, trademark and model No. Dated 2021-1-19 Title: Director By: _______ __ __________ Chester Yang ___ Signature Printed

C5266091_X8_Ed.1 Letter of Authorization Company: MAXMADE AUTO ELECTRONICS CO., LTD. Address: Building 2, GIEC Industrial Park, Puzai Road, Pingdi, Longgang District, Shenzhen, China Product Name: Car multimedia player Model Number: CAR910X, XD1CPAQ, J1CA9, DCPA91, DCPA901, CAR910, XD2CPAQ, J2CA9, DCPA92, DCPA902, CAR920, J1CA9X, DCPAY1X, DCPA901X, AVM2209S, DCPA902X, CAR920X FCC Identifier: 2AT9B-AV1338 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Chester Yang Date: 1/22/2021 Title: Director Signature of applicant: Chester tong 1/1