USER MANUAL aad UNO MG 3G Contact Menu DEVICE LAYOUT Ets NATAL maxwest er Tir er Fs Browser Menu Left Soft Key Press to select the Menu Option in the Home Screen Confirm/SOS Button Press to confirm any command Long press in Home Screen for SOS Call Button Press to call loaded number or to accept incoming call Voicemail Button Long press in Home Screen to enter your voicemail Lock/Unlock Button Long press in Home Screen to Lock device e 8 8 8 Media Command Keys Control audio files by fast forwarding, Rewind, Pause, Play or Pause. oo 86 Oo 8 86 Typing with keyboard Right Soft Key Press to select the Contacts Option in the Home Screen Power/Cancel Button Long press to Power on/off device Press to cancel any command Navigation Button Navigate the device by pressing up, down, right, or left Change Audio Profile Long press in Home Screen to change the Audio Profile Torch Light Button Long press in Home Screen to turn on the Light Torch Status Icons 3G 2G all WCDMA Network all GSM Network
(q]| No SIM Inserted ia SD Card Inserted
$03 Meeting Mode Silent Mode WY Indoor Mode ii] Battery Percentage Unread Message 4 Outdoor Mode Changing Audio Profiles Turn the device ON or OFF Long Press the Power Button ( ~~ ). Enter Unlock Pin, if necessary. To Unlock the device Press the Left Soft Key (), then the Star key ( * ) Make or answer a Call To make a call, go to the Home Screen and enter the number. Once the number is completed, Press the Call button (== ) For incoming calls, to accept the call press the Call button
( > ).To reject the call, press the Cancel button (
Calling Options Changing the Audio Profiles allows you to change the device volume levels. This menu will be found in Home Screen > Menu() > Settings > Profiles There are preset Audio Profiles:
1. General - These are the default audio levels recommend 2. Silent - These settings mute all audio notification 3. Meeting - These settings put all audio to vibration 4. Indoor - These settings make all audio levels low 5. Outdoor - These settings make all audio to max You can edit any of these settings by selecting Option () In these settings you will be able to change the ringtones, adjust volume levels, select ring type, and additional audio settings Phone Settings To Enter Speaker Mode during a phone call, press the Confirmation Button ( Sos ) To Adjust the volume levels, press up and down on the Navigation Button To End the call press the Cancel button (
For more options, select Menu by pressing Left Soft Key ( ) In this menu you can Add a new call, Place call on Hold, Start recording call, Mute Call, adjust volume, use contacts, call logs, or open messages. SOS Settings Send Text/Multimedia Messages Enter the Message Application by entering the Menu (Left Soft Key) and scroll up with the navigation button to the Application Message. Select Write message, (1) for Text Message press SMS or
(2) for Multimedia Message press MMS.
(1) to Enter the recipient, enter the phone number. Scroll down to enter the message portion of the text. Once complete, select Options and Select Send
(2) to Enter the recipient, enter the phone number. Enter the desired information (Subject, Text, Image, Video or Audio). Once complete, select Options and Select Send To View the received messages, press Inbox. To View the sending messages, press Outbox. To View the draft messages, press Draft. To View the sent messages, press Sentbox. Display Settings In Display setting you are able to change your wallpaper, adjust brightness settings, change screen timeout, change the keypad lock time, and change your screensaver settings. You will find this menu in Homescreen > Menu() > Settings > Display Settings WARNING In the Contact Menu you can save, edit, import, and export your contacts. You can access your contacts by Home Screen > Contacts () EC Tr MeL To add a new contact select 1. Select Options LSK () 2. Select New 3. Insert a Profile Picture, Name, Mobile number, Home number, add to a group, or set the ringtone 4. Select Save LSK () To add a number to speed dial, follow the steps below:
1. Select Options LSK () 2. Select Others 3. Select Speed dial 4. Select which number you want to set up 5. Input the number 6. Select ok Importing/Exporting Contacts To import/export your contacts you must have them in cvf Format:
1. Select Options LSK(__) 2. Select Import/Export 3. Select which one you would like to do The Browser Application allows you to navigate the World Wide Web. To enter the browser, follow the steps below:
Home Screen > Menu > Internet EASA cos) To search something online:
1. Select Input URL 2. Enter the website URL you would like to search A een is To set up the network GPRS setting:
1. Select Options LSK 2. Select Settings 3. Select SIM1/2 Network accounts 4. Select your SIM carrier from the preset network accounts Using Bookmarks To access pages faster, use bookmarks. There are preset pages like Facebook where you can check your account You can create your own bookmark pages as well. 1. Select Bookmarks 2. Select Options 3. Select Add 4. Select Bookmark 5. Input the information and save it The device uses T9 keyboard settings. These are the keys for each letter 1- Press multiple times to select dit 2-ABC 3-DEF 4-GHI 5-JKL 6-MNO 7-PQRS 8-TUV 9-WXYZ 0- Space
*- All the symbols in this menu
# - Allows you to change Abc, abc, To create text, see this sample:
To spell out the work World W - Press number 9 key one time o- Press number 6 key three times r- Press number 7 key three times
|- Press number 5 key three times d- Press number 3 key one time To input a number in text 1. Select the # key and select 123 2. input the number ifferent punctuation marks ABC, 123, or writing lang. To access the phone settings, go to:
Home Screen > Menu > Settings > Phone Settings In this menu you will be able to set time, set date, change time format, change date format, or change update time settings Language Settings This menu can allow you to change the language from English, French, Spanish, or Portuguese This menu allows you to change the home screen shortcut keys to different applications. Auto power on/off This menu can set your device to automatically power on/off on preset times. Power Management This menu shows the battery percentage of the device. Ge kiacied This menu will erase all data on the device, password is 0000 The SOS functionality on the device allows you to set up five (5) emergency numbers that will receive a custom text message and will automatically call the numbers in the order they are set. Disclaimer: No numbers are preset to the device, user must set their own numbers. Device must have an active service running for this function to work properly. To eed SOS functionality can be turned on/off at any time. Select SOS turn on/off, checkmark is on ny default. LOC mre tid To add a telephone number 1. Select Telephone number 2, Select the priority of the number 3. Input the number Edit Message Content To edit the message content 1. Select Message content 2. Edit the existing message 3. Select Ok Activating SOS To activate the SOS, long press the SOS button Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard (s). Operation is subject to the following two conditions:
(1) this device may not cause interference
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in an installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. SAR tests are conducted using standard operating positions accepted by the FCC/ISEDC with the device transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value, in general, the closer you are to a wireless base station antenna, the lower the power output. Before a new device is an available for sale to the public, it must be tested and certified to the FCC/ISEDC that it does not exceed the exposure limit established by the FCC/ISEDC, Tests for each device is performed in positions and locations as required by the FCC/ASEDC. For body worn operation, this device has been tested and meets the FCC/ISEDC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal and that positions the handset a minimum of 5 mm from the body. Non-compliance with the above restrictions may result in violation of RF exposure guidelines. WARNING Tout changement ou modification non expressment approuv par la partie responsable de la conformit pourrait annuler l'autorit de l'utilisateur & utiliser '&quipement. Cet appareil est conforme & la section 15 des rgles de la FCC et aux normes RSS exemptes de licence d'Industrie Canada. Le fonctionnement est soumis aux deux conditions suivantes:
(1) cet appareil ne doit pas causer diinterfrences
(2) Cet appareil doit accepter toutes les interfrences, y compris celles susceptibles de provoquer un fonctionnement indsirable de l'appareil. Remarque: cet quipement a t test et dclar conforme aux limites imposes aux appareils numriques de classe B, conformment a la section 15 des ragles de la FCC. Ces limites sont concues pour fournir une protection raisonnable contre les interfrences nuisibles dans une installation rsidentielle. Cet quipement gnre, utilise et peut mettre de l'nergie de frquence radio. Sil n'est pas install et utilis conformment aux instructions, il peut causer des interfrences nuisibles aux communications radio. Cependant, il nest pas garanti que Vinterfrence ne se produira pas dans une installation. Si cet quipement provoque des interfrences nuisibles a la rception de radio ou de tlvision, ce qui peut tre dtermin en teignant et en rallumant quipement, il est conseill a l'utilisateur dessayer de corriger Vinterfrence en: une ou plusieurs des mesures suivantes:
-Rorienter ou dplacer I'antenne de rception.
-Augmenter la sparation entre quipement et le rcepteur.
-Connectez I'quipement a une prise d'un circuit diffrent de celui auquel le rcepteur est connect.
-Consultez le revendeur ou un technicien expriment en radio / tlvision pour obtenir de l'aide. Les tests SAR sont effectus sur des positions de fonctionnement standard acceptes par la FCC
/ ISEDC, l'appareil mettant & son niveau de puissance certifi le plus lev dans toutes les bandes de frquences testes, bien que le SAR soit dtermin au niveau de puissance certifi le plus lev, le niveau de le fonctionnement peut tre bien infrieur & la valeur maximale. En gnral, plus vous tes proche d'une antenne de station de base sans fil, plus la puissance dlivre est faible. Avant qu'un nouveau dispositif ne soit disponible a la vente au public, il doit tre test et certifi parla FCC / SEDC quill ne dpasse pas la limite d'exposition fixe par la FCC / ISEDC. Pour chaque dispositif, les tests sont effectus requis par la FCC/ISEDC. Pour un usage sur le corps, cet appareil a t test et respecte les directives d'exposition RF de la FCC /ISEDC lorsquil est utilis avec un accessoire congu pour ce produit ou avec un accessoire ne contenant pas de mtal et positionnant le combin 4 5 mm minimum. corps. Le non-respect des restrictions ci-dessus peut entrainer une violation des consignes d'exposition aux RF.