FCC ID: 2ASVQ-NS003 PodsKit

Bluetooth USB Audio Adapter for Nintendo Switch, PS4 & PC 1. To connect a second pair of headphones / earphones, please repeat steps 1-4 above. 2. If you used pairing button 1 to connect the first bluetooth device, please use pairing button 2 to connect the second device (and vice versa). Note:

Once a device has been paired with the PodsKit, it will reconnect automati-cally next time you turn use it. 3. To connect a second pair of headphones / earphones, please repeat steps 1-4 above. 4. If you used pairing button 1 to connect the first bluetooth device, please use pairing button 2 to connect the second device (and vice versa). Note:

Once a device has been paired with the PodsKit, it will reconnect automati-cally next time you turn use it. Microphone FCC ID: 2ASVQ-NS003 Introduction Thank you for purchasing the MAYFLASH PodsKit Bluetooth Audio Adapter for Nintendo Switch, PS4 and PC!

Please read this manual thoroughly before using the PodsKit for the first time, and retain this manual for future reference. System Compatibility Nintendo Switch Nintendo Switch Lite PS 4 Windo ws Quick Start USB-

C PodsK it

-Switch (handheld mode), Switch Lite and PC (with an available USB-

C port):

Plug the PodsKit into the USB-C port of your Switch console / PC.

-Switch (docked mode), PS4 and PC

(with an available USB-A port):

Attach the USB-C to USB-A adapter

(included) before plugging the PodsKit in. USB-

A PodsKit USB-A adapter 1. Set your Bluetooth headphones or earphones to pairing consult the operating manual of your Bluetooth device for mode (please instructions on how to enable pairing mode). 2. Enter pairing mode on the PodsKit, by holding button 1 or button 2 for 4 seconds. 4s 3. The LED indicator will start flashing white to indicate the PodsKit has successfully entered pairing mode. 4. Pairing is successful when the LED on the PodsKit changes from flashing white to constant white. You are now ready to enjoy high quality sound through your Bluetooth headphones / earphones!

Connecting a Second Bluetooth Device PodsKit supports connection for two pairs of Bluetooth headphones / earphones simultaneously. Product Specification Input port: USB Type C / USB A (using the included adapter). Transmission distance:

10m/33ft Frequency range:2.402GHz - 2.480GHz Product size: 48mm x 14mm x 5.0mm Platforms: Nintendo Switch,Switch Lite,PS4,PC Supported protocols: Qualcomm aptX LL&aptX,SBC,A2DP,AFH,HFP,HSP Low Latency transmission is available only when both the Bluetooth adapter and headset support aptX LL or AptX technology. Bluetooth headsets with AptX LL or AptX technology are recommended for music games To activate low delay transmission using atpX or aptX LL protocols, the Bluetooth headset and Bluetooth transmitter must both be equipped with aptX or aptX LL technology. Due to the particularity of Bluetooth signal transmission and size limitation, TWS earphones normally have weaker signal strength and anti-interference ability compared with ordinary Bluetooth earphones. Due to the specific wireless technology built into individual Bluetooth headsets, users may experience temporary disconnection or sound delays causedby electromagnetic interferences in air.When this happens, please reduce the distance between the Bluetooth headset and the Bluetooth transmitter, and or move to a new location. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Statement:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF exposure compliance statement:

This device has been evaluated to meet the general RF exposure requirement

MAYFLASH LIMITED Agent Authorization Company: MAYFLASH LIMITED Address: 3/F,Buiding No.1,TingWei Industrial Park, LiuFang Rd, No.67, BaoAn, Shenzhen, China Product Name: PodsKit Model Number(s): NS003 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Min Zheng Title:

manager Company: MAYFLASH LIMITED Date: Aug. 20, 2020

MAYFLASH LIMITED Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2ASVQ-NS003 Date: Aug. 20, 2020 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure External Photos Test Setup Photos Internal Photos User Manual In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Min Zheng Title: manager