Quick Reference: Portable Receiver (MV-ALS-PRFM) Unit Controls The Media Vision portable receiver offers a selection of 57 channels and an OLED display which indicates battery life, signal strength, volume and a channel selection. The unit is lightweight and can accomopdate multiple headset options for a comfortable listening experience for the user. Needed (not included): earphone, headphone or neckloop, optional rechargeable or alkaline AA batteries. REMOVABLE CLIP POWER HEADPHONE JACK SIGNAL STRENGTH MODE INDICATOR CHANNEL LOCK INDICATOR OLED SCREEN USB NAVIGATION SET BATTERY LIFE INDICATOR 50% or more 25-49%
Less than 25%
When this segment begins flashing along with the LED on top of the unit, you should immediately change your batteries or recharge them. CHARGING CONTACTS BATTERY DOOR REMOVABLE CLIP ON BACK 4 www.media-vision.comMV-ALS-Series Quick Reference: Portable Receiver (MV-ALS-PRFM) Turn-On 1. Press and hold power button for 1 second till logo Media Vision shows up. 2. Logo Media Vision shows up for 2 seconds, and then OLED becomes dim. 3. The screen shows default (CH E)/previously used channel or custom label, symbols of battery , lock , and signal strength . Turn-0ff 1. Press and hold power button for 2 seconds and logo Media Vision shows up for 2 seconds. 2. Then, OFF shows up for 1 second. 3. The player turns off. Channel Change 1. Press + or to change the channel when the device is in unlock mode. 2. In unlock mode, channel will flash and be ready for change. 3. Two band types, wideband only (17 channels) or both wide and narrowband (57 channels), are available for the player. Default type is wideband channel A~T). Wideband: A~T Wideband and narrow band: A~T & 1~40 4. To scroll channels rapidly, keep pressing + or to change the channel. 5. Once selected channel is confirmed, press SET button (o) to confirm the channel. If not, the OLED will show previously used channel after being idle for 10 seconds. Channel Lock 1. The player will automatically be locked immediately when its turned on. 2. When the channel is changed and SET button is press to confirm the change (or idled for 10 seconds without pressing any button), the player will automatically enter lock mode and symbol shows up. 3. To release the player from lock mode, press both + and at the same time for 1 second until symbol disappears. 5 Assistive Listening SystemMV-ALS-Series Quick Reference: Portable Receiver (MV-ALS-PRFM) LED Indicators 1. When the player is on and doesnt receive signal from transmitter, LED will turn to be solid red and bar symbol flashes.
(Symbol flashes with solid red LED.) 2. When the player is on and with low battery, LED will turns to be solid red and battery symbol flashes.
(Symbol flashes with solid red LED.) 3. When the player is on under non-signal and low-battery status, 2 symbols will flash interchangeably with solid red LED.
(Both symbols flash interchangeably with solid red LED.) 4. Except above 3 situations, LED will stay green under normal operation. 5. The screen will return to default (currently used channel/custom label) if any button is pressed under the status of flashing symbol. Solid red LED keeps unchanged. Volume Adjustment 1. This adjustment can be done only when the player is in lock mode. 2. Press button + or - to adjust the volume (default: level 8, 16 levels in total). 3. When the volume is at lowest level, player will be muted and its screen will show below. 4. After the volume is successfully adjusted, the symbol disappears if idled for 1 second and OLED shows currently used channel/custom label. Auto-Off 1. The player will be off automatically if no signal is received for 20 minutes. 2. This function can be disabled via proprietary software. Tone 1. Default is disabled to work with competitors system. 2. This function can be disabled via proprietary software. Battery Status Check 1. When the player is off, press and hold both and power buttons. 2. The screen will show current battery status and stay for 2 seconds, then be off. 6 www.media-vision.comMV-ALS-Series Quick Reference: Stationary Transmitter (MV-ALS-STFM) MV-ALS-STFM-D (Dante-enabled version) Unit Controls 72-76 MHz FM, 57 programmable channels, balanced and unbalanced inputs, balanced outputs, OLED display, access to software interface. Tabletop or rack-mounting, power cord and USB programming cable included, optional Helical or Remote Antenna needed (not included). CHANNEL INDICATOR CHANNEL POWER MIC INPUT LEVEL ADJUSTMENT KNOB MVALSSTFM NARROW / WIDEBAND INDICATOR LOCK INDICATOR RF SIGNAL STRENGTH INDICATOR CHANNEL SELECT KNOB AUX INPUT LEVEL ADJUSTMENT KNOB QuickGuide MONITOR PORT MONITOR LEVEL ADJUSTMENT KNOB Mix Output (Mic and Aux input Blend MIX OUTPUT (MIC AND AUX) INPUT BLEND Antenna CHANNEL INDICATOR Connector
(BNC) Mic Input (XLR / TRS Combo Jack) MIC INPUT (XLR / TRS COMBO JACK) LINE MIC MIC + PHANTOM POWER Line MIC MIC + Phantom Power POWER SUPPLY Power Supply OLED ON FRONT SHOWS VARIOUS POWER SIGNAL STRENGTH UPON SETTING SWITCH HERE OLEDshowsvariouspowersignal strengthuponsettingswitchhere. Hi Mid Lo AUX INPUT USB Aux Input USB 9 Assistive Listening SystemMV-ALS-Series Quick Reference: Stationary Transmitter (MV-ALS-STFM) Turn-On 1. Press and hold power button for 1 second till logo Media Vision shows up, which will stay for 2 seconds. 2. The screen shows default channel (E) or custom label, symbol wideband (
). The system will be locked immediately when it is turned on. strength (
), symbol lock (
), and signal 3. The screen becomes dim after 5 seconds and starts to scroll. Turn-Off 1. Press and hold power button for 2 seconds and logo Media Vision shows up for 2 seconds. 2. Then, OFF shows up for 1 second. 3. The player turns off. Channel Lock 1. The system will automatically be locked after its been turn on. 2. Press and hold CH SELECT button for 3 seconds to release the system from lock mode. Symbol disappears from the screen. QuickGuide QuickGuide QuickGuide Mix Output (Mic and Aux Mix Output (Mic and Aux Mix Output (Mic and Aux Channel Change 1. Turn CH SELECT button clockwise or counterclockwise to change the channel when the device is in unlock mode. input Blend input Blend input Blend Mic Input (XLR / TRS Combo Jack) Mic Input (XLR / TRS Combo Jack) Mic Input (XLR / TRS Combo Jack) Antenna Antenna Antenna Connector Connector Connector
(BNC)
(BNC) in previously selected channel after being idled for 10 seconds.
(BNC) Line Line Line MIC MIC MIC MIC + Phantom Power MIC + Phantom Power MIC + Phantom Power 2. When preferred channel is chosen, press CH SELECT button again to confirm the setting. If not, the system will stay Power Supply Power Supply Power Supply 3. The system will be in lock mode again after above setting is completed. Reset to Default Setup 1. Press and hold CH SELECT button to turn the system on. 2. The system will be reset to default settings which include followings. 2-1: Channel E 2-2: Seventeen wideband channels are enabled 2-3: Custom labels are removed Signal Strength OLEDshowsvariouspowersignal OLEDshowsvariouspowersignal OLEDshowsvariouspowersignal 1. Symbol signal strength varies upon strength setting on the back side of the system. strengthuponsettingswitchhere. strengthuponsettingswitchhere. strengthuponsettingswitchhere. 2-1 2-2 2-3 Hi Hi Hi Hi Mid Mid Mid Mid Lo Lo Lo Lo Aux Input Aux Input Aux Input USB USB USB draft2 draft2 draft2 2 2 2 MVALSSTFM MVALSSTFM MVALSSTFM 10 www.media-vision.comMV-ALS-Series Portable Transmitter (MV-ALS-PTFM) Quick Reference Portable Transmitter 72-76 MHz FM, operating range: up to 100 feet, 57 programmable channels, settings lock, OLED display. Needed (not included): microphone, optional rechargeable or alkaline AA batteries. POWER / MUTE MIC INPUT SIGNAL / MUTE LED MODE INDICATOR CHANNEL MIC LEVEL LOCK INDICATOR OLED SCREEN USB NAVIGATION SET CHARGING CONTACTS BATTERY DOOR REMOVABLE CLIP ON BACK BATTERY LIFE INDICATOR 50% or more 25-49%
Less than 25%
When this segment begins flashing along with the LED on top of the unit, you should immediately change your batteries or recharge them. 13 Assistive Listening SystemMV-ALS-Series Portable Transmitter (MV-ALS-PTFM) Quick Reference Turn-On 1. Press and hold power button for 1 second till logo Media Vision shows up. 2. Logo Media Vision shows up for 2 seconds, and then OLED becomes dim. 3. The screen shows default (CH E)/previously used channel or custom label, symbols of battery , lock , and signal strength . Turn-Off 1. Press and hold power button for 2 seconds and logo Media Vision shows up for 2 seconds. 2. Then, OFF shows up for 1 second. 3. The player turns off. Channel Change 1. Press + or to change the channel when the device is in unlock mode. 2. In unlock mode, channel will flash and be ready for change. 3. 2 band types, wideband only (17 channels) or both wide- and narrowband (57 channels), are available for the player. Default type is wideband channel A~T). Wideband: A~T Wideband and narrow band: A~T & 1~40 4. To scroll channels rapidly, keep pressing + or to change the channel. 5. Once selected channel is confirmed, press SET button (o) to confirm the channel. If not, the OLED will show previously used channel after being idle for 10 seconds. Channel Lock 1. The player will automatically be locked immediately when its turned on. 2. When the channel is changed and SET button is press to confirm the change (or idled for 10 seconds without pressing any button), the player will automatically enter lock mode and symbol shows up. 3. To release the player from lock mode, press both + and at the same time for 1 second until symbol disappears. 14 www.media-vision.comMV-ALS-Series MVALSPTFMbriefinstructionmanualv.1(11thDec.2015) Portable Transmitter (MV-ALS-PTFM) Quick Reference 3. Toreleasetheplayerfromlockmode,pressboth+andatthesametimefor1seconduntilsymbol disappears. MVALSPTFMbriefinstructionmanualv.1(11thDec.2015) MVALSPTFMbriefinstructionmanualv.1(11thDec.2015) LEDindicators 3. 1. Whentheplayerisonandwithlowbattery,LEDwillturnstobesolidredandbatterysymbolflashes. 3. Toreleasetheplayerfromlockmode,pressboth+andatthesametimefor1seconduntilsymbol LED Indicators 1. When the player is on and with low battery, LED will turns to be solid red and battery symbol flashes. Toreleasetheplayerfromlockmode,pressboth+andatthesametimefor1seconduntilsymbol disappears. disappears. 2. Except above situation, LED will stay green under normal operation. 3. The screen will return to default (currently used channel/custom label) if any button is pressed under the status
(Symbol flashes with solid red LED)
(SymbolflasheswithsolidredLED.) Exceptabovesituation,LEDwillstaygreenundernormaloperation. Thescreenwillreturntodefault(currentlyusedchannel/customlabel)ifanybuttonispressedunderthestatusofflashing symbol.SolidredLEDkeepsunchanged. 2. 3. LEDindicators 1. Whentheplayerisonandwithlowbattery,LEDwillturnstobesolidredandbatterysymbolflashes. LEDindicators 1. Whentheplayerisonandwithlowbattery,LEDwillturnstobesolidredandbatterysymbolflashes. of flashing symbol. Solid red LED keeps unchanged. 2. 3.
(SymbolflasheswithsolidredLED.) Exceptabovesituation,LEDwillstaygreenundernormaloperation. Thescreenwillreturntodefault(currentlyusedchannel/customlabel)ifanybuttonispressedunderthestatusofflashing symbol.SolidredLEDkeepsunchanged.
(SymbolflasheswithsolidredLED.) Exceptabovesituation,LEDwillstaygreenundernormaloperation. Thescreenwillreturntodefault(currentlyusedchannel/customlabel)ifanybuttonispressedunderthestatusofflashing Presspower(
symbol.SolidredLEDkeepsunchanged. 2. Mute 3. 1. 2. Whentheplayerismuted,bothgreenLEDandmutesymbolflash. Mute 1. Press power ( ) button for 0.5 second to enter MUTE mode.
)buttonfor0.5secondtoenterMUTEmode.
(BothsymbolandgreenLEDflash.)
(Both symbol and green LED flash) Presspower(
Presspower(
Mute 1. 2. Whentheplayerismuted,bothgreenLEDandmutesymbolflash. 3. Whentheplayerismutedunderlowbatterystatus,2symbolswillflashinterchangeablywithflashingredLED. Mute 1. 2. Whentheplayerismuted,bothgreenLEDandmutesymbolflash. 4. Thescreenwillreturntodefault(currentlyusedchannel/customlabel)ifanybuttonispressedunderthestatusofflashing symbol.SolidredLEDkeepsunchanged.
(BothsymbolsflashinterchangeablywithflashingredLED.)
(Both symbol and green LED flash.)
)buttonfor0.5secondtoenterMUTEmode.
)buttonfor0.5secondtoenterMUTEmode. 2. When the player is muted, both green LED and mute symbol flash. 3. Whentheplayerismutedunderlowbatterystatus,2symbolswillflashinterchangeablywithflashingredLED. 3. Whentheplayerismutedunderlowbatterystatus,2symbolswillflashinterchangeablywithflashingredLED.
(Both symbols flash interchangeably with flashing red LED) 3. When the player is muted under low-battery status, 2 symbols will flash interchangeably with flashing red LED.
(BothsymbolandgreenLEDflash.)
(BothsymbolandgreenLEDflash.)
(Both symbols flash interchangeably with flashing red LED.) 4. MICLeveladjustment 4. 1. 2. Thescreenwillreturntodefault(currentlyusedchannel/customlabel)ifanybuttonispressedunderthestatusofflashing Thescreenwillreturntodefault(currentlyusedchannel/customlabel)ifanybuttonispressedunderthestatusofflashing PressandholdSET()toturnthedeviceon. the status of flashing symbol. Solid red LED keeps unchanged. symbol.SolidredLEDkeepsunchanged. symbol.SolidredLEDkeepsunchanged. Thescreenwillshowdefault(Hi)forleveladjustment.
(BothsymbolsflashinterchangeablywithflashingredLED.)
(BothsymbolsflashinterchangeablywithflashingredLED.) 4. The screen will return to default (currently used channel/custom label) if any button is pressed under Press+or1buttontoscrolltheoption. 3. MICLeveladjustment 1. 2. 4. Whenpreferredlevelisselected,leaveitfor5secondsorpresspower(
PressandholdSET()toturnthedeviceon. Thescreenwillshowdefault(Hi)forleveladjustment. PressandholdSET()toturnthedeviceon. Thescreenwillshowdefault(Hi)forleveladjustment. MICLeveladjustment 1. 2. MIC-Level Adjustment 1. Press and hold SET () to turn the device on. For Art - Change this to LOW
)buttontoconfirmthesetting. 2. The screen will show default (Hi) for level adjustment. 3. 3. Press+or1buttontoscrolltheoption. Press+or1buttontoscrolltheoption. 3. Press + or 1 button to scroll the option. For Art - Change this to LOW For Art - Change this to LOW 2 For Art - Change this to LOW 4. Whenpreferredlevelisselected,leaveitfor5secondsorpresspower(
4. Whenpreferredlevelisselected,leaveitfor5secondsorpresspower(
MVALSPTFMbriefinstructionmanualv.1(11thDec.2015)
)buttontoconfirmthesetting.
)buttontoconfirmthesetting. 4. When preferred level is selected, leave it for 5 seconds or press power ( ) button to confirm the setting. For Art - Change this to LOW For Art - Change this to LOW BatteryStatusCheck 1. Whentheplayerisoff,pressandholdbothandpowerbutton. 2. Thescreenwillshowcurrentbatterystatusandstayfor2seconds,thenbeoff.. 2 2 Battery Status Check 1. When the player is off, press and hold both and power ( ) buttons. 2. The screen will show current battery status and stay for 2 seconds, then be off. ResettoDefaultSetting 1. 2. Pressandholdboth+andbuttonstoturntheplayeron. Theplayerwillberesettodefaultsettingswhichincludefollowings. 21 ChannelE 22 17widebandchannelsareenabled 23 Customlabelsareremoved Charging 1. TheplayerwontbechargedwhenitsconnectedwithPCviamicroUSB. ThisfunctionisNOTconfirmedyet.Sampledeliveredon15thDec2015canbechargedviaPC. 15 Assistive Listening SystemMV-ALS-Series Portable Transmitter (MV-ALS-PTFM) Quick Reference Reset to Default Setting 1. Press and hold both + and buttons to turn the player on. 2. The player will be reset to default settings which include followings. 2-1: Channel E 2-2: Seventeen wideband channels are enabled 2-3: Custom labels are removed Charging 1. The player wont be charged when its connected with PC via micro USB. 2. Solid red LED shows when the player is being charged. When fully charged, LED turns to be solid green. 3. Red LED will flash when following situations occur. 3-1: without batteries inside 3-2: batteries are not rechargeable 3-3: battery is defective 4. The screen of players will vary upon different occasions. See the table below Wall-Wart Player on 1. Still on Player off 1. Still off 2. Battery blocks scrolls. Full battery blocks when fully charged. 2. No symbols on the screen Charger 1. Auto-off 2. No symbols on the screen PC 1. Autooff 2. Logo Media Vision shows up for 2 seconds, and then USB symbol displays. 3. LED indicator is the only way to know the charging status when PC connected. MVRPbriefinstructionmanualv.0(7th.Dec.2015) MVRPbriefinstructionmanualv.0(7th.Dec.2015) Note:
Maximum charging time for players is 8 hours and LED will turns to be green when time is due. Channel Select Mode 1. Press and hold + button to turn the player on and enter Channel Select Mode. ChannelSelectMode ChannelSelectMode 1. 1. 2. Channelswilldisplayfrombeginning(CHA)andwhitebackgroundstandsforbeingselected.Allchannelsareselectedby 2. Channelswilldisplayfrombeginning(CHA)andwhitebackgroundstandsforbeingselected.Allchannelsareselectedby Pressandhold+buttontoturntheplayeronandenterChannelSelectMode. Pressandhold+buttontoturntheplayeronandenterChannelSelectMode. default.Press+buttontochangechannels. default.Press+buttontochangechannels. 2. Channels will display from beginning (CH A) and white background stands for being selected. 3. 3. All channels are selected by default. Press + button to change channels. Todisableachannel,pressSETbuttonandthebackgroundturnstobeblack.Toreselectthechannel,simplypressSETbutton Todisableachannel,pressSETbuttonandthebackgroundturnstobeblack.Toreselectthechannel,simplypressSETbutton again. again. 3. To disable a channel, press SET button and the background turns to be black. 4. Allchangesthathavebeendonewillautomaticallybeconfirmediftheplayerisidledfor5secondsoranybuttonispressed. 4. Allchangesthathavebeendonewillautomaticallybeconfirmediftheplayerisidledfor5secondsoranybuttonispressed. To re-select the channel, simply press SET button again. 4. All changes that have been done will automatically be confirmed if the player is idled for 5 seconds or any button is pressed. Uploading ****ALL FOLLOWING INFORMATION WILL BE INCLUDED ONLY IN THE SOFTWARE PORTION OF Uploading ****ALL FOLLOWING INFORMATION WILL BE INCLUDED ONLY IN THE SOFTWARE PORTION OF THE MANUAL THE MANUAL 1. WhentheplayerisconnectedwithPC,itwillshowlogoMediaVisionfor2seconds,andthensymbolUSB. 1. WhentheplayerisconnectedwithPC,itwillshowlogoMediaVisionfor2seconds,andthensymbolUSB. 16 2. 2. Statuscolumninproprietarysoftwareshowsmessageofsuccessfulconnection. Statuscolumninproprietarysoftwareshowsmessageofsuccessfulconnection. www.media-vision.comMV-ALS-Series again. 4. Allchangesthathavebeendonewillautomaticallybeconfirmediftheplayerisidledfor5secondsoranybuttonispressed. Software Operation: Portable Receiver (MV-ALS-PRFM)
****The Rest of this Document will be under the Software Introduction portion of the Manual Uploading Receiver Software 1. When the player is connected with PC, it will show logo Media Vision for 2 seconds, and then symbol USB. Uploading 1. WhentheplayerisconnectedwithPC,itwillshowlogoMediaVisionfor2seconds,andthensymbolUSB. 2. 2. Status column in proprietary software shows message of successful connection. Statuscolumninproprietarysoftwareshowsmessageofsuccessfulconnection. Newsoftwareinterface 3. Now,theplayerisreadyforbeinguploaded.5settingscanbedoneinthissoftware. 3-2: Custom label edited 3-1: Channel selected or disabled 3. Now, the player is ready for being uploaded. 5 settings can be done in this software. 31ChannelSelectedorDisabled 32Customlabeledited 3-3: Wideband only or both wide and narrowband setup 33Widebandonlyorbothwideandnarrowbandsetup Note:
1. Others 1. The screen will become dim if being idled for 5 seconds. Forbetterunderstandingofthesoftware,pleasereaditsmanual. 3-5: Auto-off enabled or disabled 3-4: Tone enabled or disabled Note:
1. For better understanding of the software, please read its manual. 2. The player wont work while being uploaded. 3. The player will be off when being disconnected from PC. 18 USB Upload www.media-vision.comMV-ALS-Series again. 4. Allchangesthathavebeendonewillautomaticallybeconfirmediftheplayerisidledfor5secondsoranybuttonispressed. Software Operation: Stationary and Portable Transmitter (MV-ALS-STFM, MV-ALS-PTFM)
****The Rest of this Document will be under the Software Introduction portion of the Manual Uploading Transmitter Software 1. After being plugged in the socket, it can be uploaded while micro USB is connected with PC. Uploading 1. WhentheplayerisconnectedwithPC,itwillshowlogoMediaVisionfor2seconds,andthensymbolUSB. 2. When the system is connected with PC, it will show logo Media Vision for 2 seconds, and then symbol USB. 3. Status column in proprietary software shows message of successful connection. Statuscolumninproprietarysoftwareshowsmessageofsuccessfulconnection. 2. 3. Now,theplayerisreadyforbeinguploaded.5settingscanbedoneinthissoftware. 4. Now, the player is ready for being uploaded. 5 settings can be done in this software. 3-2: Custom label edited 3-1: Channel selected or disabled 31ChannelSelectedorDisabled 32Customlabeledited 3-3: Wideband only or both wide and narrowband setup 33Widebandonlyorbothwideandnarrowbandsetup Others Note:
1. The screen will become dim if being idled for 5 seconds. 1. Note:
1. For better understanding of the software, please read its manual. 2. The player wont work while being uploaded. 3. The player will be off when being disconnected from PC. Forbetterunderstandingofthesoftware,pleasereaditsmanual. Newsoftwareinterface 19 Assistive Listening SystemMV-ALS-Series FCC statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.