FCC ID: RAS-MT7902 1TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card

by: MediaTek Inc. latest update: 2023-09-22 model: MT7902

Thirty Six grants have been issued under this FCC ID from 05/03/2022 to 09/22/2023 (this is one of one hundred and eighty-six releases in 2023 for this grantee). Public details available include manuals, internal & external photos, and frequency information. some products also feature user submitted or linked instructions, password defaults, drivers, warrantee terms, & troubleshooting guides.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various E21045 UM3504DA EM draft4 Users Manual pdf 5.51 MiB March 07 2023 / September 04 2023 delayed release
various E21046 UM3504DA UM 20pages draft4 Users Manual pdf 1.05 MiB March 07 2023 / September 04 2023 delayed release
various User Manual Users Manual pdf 3.24 MiB March 06 2023 / September 03 2023 delayed release
various Users Manual pdf June 05 2023 / September 22 2023
various Users Manual pdf June 15 2023 / September 22 2023
various Users Manual revised 0711 Users Manual pdf 1.54 MiB July 11 2023 / September 22 2023
various 22-2152 EUT Internal Photos FCC IC Internal Photos pdf 3.27 MiB March 07 2023 / September 04 2023 delayed release
various Internal Photos Internal Photos pdf 1.27 MiB June 05 2023 / September 22 2023
various MT7902- Inpho - 0302 Internal Photos pdf 1.87 MiB March 06 2023 / September 03 2023 delayed release
various 22-2152 EUT External Photos FCC IC External Photos pdf 2.81 MiB March 07 2023 / September 04 2023 delayed release
various External Photos External Photos pdf 2.57 MiB June 05 2023 / September 22 2023
various MT7902- Expho External Photos pdf 324.17 KiB March 06 2023 / September 03 2023 delayed release
various External Photos pdf June 05 2023 / September 22 2023
various Label Location ID Label/Location Info pdf 37.27 KiB June 05 2023 / September 22 2023
various Label Sample ID Label/Location Info pdf 36.03 KiB June 05 2023 / September 22 2023
various ID Label/Location Info pdf March 06 2023 / March 07 2023
various ID Label/Location Info pdf March 07 2023 / March 08 2023
various Cover Letter(s) pdf June 05 2023 / September 22 2023
various Add Equipment Code Cover Letter(s) pdf 273.48 KiB June 05 2023 / September 22 2023
various Agent Authorization Cover Letter(s) pdf 340.09 KiB June 05 2023 / September 22 2023
various Antenna Spec 1 Test Report pdf 866.79 KiB June 05 2023 / September 22 2023
various Antenna Spec 2 Test Report pdf 773.75 KiB June 05 2023 / September 22 2023
various Antenna Spec 3 Test Report pdf 979.36 KiB June 05 2023 / September 22 2023
various Attestation 6CD device Declaration revised 0625 Attestation Statements pdf 212.14 KiB June 26 2023 / September 22 2023
various Block Diagram Block Diagram pdf June 05 2023 confidential
various Confidentiality Request Cover Letter(s) pdf 186.49 KiB June 05 2023 / September 22 2023
various Contact Authorization Cover Letter(s) pdf 356.80 KiB June 05 2023 / September 22 2023
various Cover Letter-Statements of part 2.911 d 5 Attestation Statements pdf 188.45 KiB June 05 2023 / September 22 2023
various Modular Approval Request Cover Letter(s) pdf 151.94 KiB June 05 2023 / September 22 2023
various OP Module non-RF difference attachment Operational Description pdf July 11 2023 confidential
various Operational Description Operational Description pdf June 05 2023 confidential
various Operational Description Inquiry to FCC KDB 614239 Operational Description pdf July 11 2023 confidential
various Operational Description Inquiry to FCC KDB 614239 attachmemt Operational Description pdf July 11 2023 confidential
various Original RF Exposure Info SAR RF Exposure Info pdf 1.87 MiB June 05 2023 / September 22 2023
various Original RF Exposure Info SAR Annex A-K RF Exposure Info pdf 3.10 MiB June 05 2023 / September 22 2023
various Original RF Exposure Info SAR Annex Z-1 RF Exposure Info pdf 5.18 MiB June 05 2023 / September 22 2023
various Original RF Exposure Info SAR Annex Z-2 RF Exposure Info pdf 4.72 MiB June 05 2023 / September 22 2023
various Original Test Report 6XD Test Report pdf 3.38 MiB June 05 2023 / September 22 2023
various Original Test Set Up Photos DFS Test Setup Photos pdf 137.96 KiB June 05 2023 / September 22 2023
various RF Exposure Info pdf June 05 2023 / September 22 2023
various RF Exposure Info MPE revised 0913 RF Exposure Info pdf 321.82 KiB September 13 2023 / September 22 2023
various RF Exposure Info pdf June 05 2023 / September 22 2023
various RF Exposure Info SAR revised RF Exposure Info pdf 2.01 MiB June 15 2023 / September 22 2023
various RF Exposure Info pdf June 05 2023 / September 22 2023
various RF Exposure Info SAR Appendix A-Z revised RF Exposure Info pdf 3.75 MiB June 15 2023 / September 22 2023
various Schematics-A Schematics pdf June 05 2023 confidential
various Schematics-B Schematics pdf June 05 2023 confidential
various Schematics-DIV A Schematics pdf June 05 2023 confidential
various Schematics-DIV B Schematics pdf June 05 2023 confidential
various Software Operational Description Operational Description pdf June 05 2023 confidential
various Software Operational Description SDR Software/Security Inf pdf June 05 2023 confidential
various Test Report pdf June 05 2023 / September 22 2023
various Test Report pdf June 26 2023 / September 22 2023
various Test Report 6CD 1 revised 0913 Test Report pdf 5.49 MiB September 13 2023 / September 22 2023
various Test Report pdf June 05 2023 / September 22 2023
various Test Report 6CD 2 revised 0913 Test Report pdf 784.75 KiB September 13 2023 / September 22 2023
various Test Report pdf June 05 2023 / September 22 2023
various Test Report co located Test Report pdf 1018.54 KiB June 05 2023 / September 22 2023
various Test Setup Photos pdf June 05 2023 / September 22 2023
various Test Setup Photos pdf June 15 2023 / September 22 2023
various Test Set Up Photos SAR revised 0628 Test Setup Photos pdf 1.13 MiB June 28 2023 / September 22 2023
various Test Setup Photo Test Setup Photos pdf 1.90 MiB June 05 2023 / September 22 2023
various U.S. local Agent Letter of part 2.911 d 7 Attestation Statements pdf 344.11 KiB June 05 2023 / September 22 2023
various RF Exposure Info pdf March 07 2023 / March 08 2023
various RF Exposure Info pdf March 07 2023 / March 08 2023
various RF Exposure Info pdf March 07 2023 / March 08 2023
various RF Exposure Info pdf March 07 2023 / March 08 2023
various RF Exposure Info pdf March 07 2023 / March 08 2023
various 2302FS14 Appendix E Test Setup Photographs 22-2152 Test Setup Photos pdf 181.64 KiB March 07 2023 / September 04 2023 delayed release
various RF Exposure Info pdf March 07 2023 / March 08 2023
various ICT LA9RF467-CS-H UM3504 Main Test Setup Photos pdf 620.59 KiB March 07 2023 / September 04 2023 delayed release
various Test Report pdf March 07 2023 / March 08 2023
various ICT LA9RF467-CS-H UM3504 Main Operational Description pdf March 07 2023 confidential
various ICT LA9RF468-CS-H UM3504 Aux Test Setup Photos pdf 635.98 KiB March 07 2023 / September 04 2023 delayed release
various Test Report pdf March 07 2023 / March 08 2023
various ICT LA9RF468-CS-H UM3504 Aux Operational Description pdf March 07 2023 confidential
various INPAQ MDA-LE-01-008 UM3504 Aux Test Setup Photos pdf 159.44 KiB March 07 2023 / September 04 2023 delayed release
various Test Report pdf March 07 2023 / March 08 2023
various INPAQ MDA-LE-01-008 UM3504 Aux Operational Description pdf March 07 2023 confidential
various INPAQ MDA-LE-02-017 UM3504 Main Test Setup Photos pdf 181.82 KiB March 07 2023 / September 04 2023 delayed release
various Test Report pdf March 07 2023 / March 08 2023
various INPAQ MDA-LE-02-017 UM3504 Main Operational Description pdf March 07 2023 confidential
various Cover Letter(s) pdf March 07 2023 / March 08 2023
various Cover Letter(s) pdf March 07 2023 / March 08 2023
various Attestation Statements pdf March 07 2023 / March 08 2023
various FCC Attestation Letter US AGENT (non-US-applicant) RV Attestation Statements pdf 528.70 KiB March 07 2023 / March 08 2023
various Cover Letter(s) pdf March 07 2023 / March 08 2023
various Cover Letter(s) pdf March 07 2023 / March 08 2023
various Cover Letter(s) pdf March 06 2023 / March 07 2023
various Antenna spec Innowave-NB mode 20230220 Test Report pdf 968.93 KiB March 06 2023 / March 07 2023
various Test Report pdf March 06 2023 / March 07 2023
various Test Report pdf March 06 2023 / March 07 2023
various Test Report pdf March 06 2023 / March 07 2023
various Cover Letter(s) pdf March 06 2023 / March 07 2023
various MT7902- Class II Change 20230303 ok Cover Letter(s) pdf 130.43 KiB March 06 2023 / March 07 2023
various Cover Letter(s) pdf March 06 2023 / March 07 2023
various Cover Letter(s) pdf March 06 2023 / March 07 2023
various RF Exposure Info pdf March 06 2023 / March 07 2023
various RF Exposure Info pdf March 06 2023 / March 07 2023
various MT7902- Tsup-SAR Test Setup Photos pdf 271.04 KiB March 06 2023 / September 03 2023 delayed release
various Attestation Statements pdf March 06 2023 / March 07 2023
various E21045 UM3504DA EM draft4 Users Manual pdf 5.51 MiB March 07 2023 / September 04 2023 delayed release
various E21046 UM3504DA UM 20pages draft4 Users Manual pdf 1.05 MiB March 07 2023 / September 04 2023 delayed release
various User Manual Users Manual pdf 3.24 MiB March 06 2023 / September 03 2023 delayed release
various Users Manual revised 0711 Users Manual pdf 1.54 MiB July 11 2023 / September 22 2023
various 22-2152 EUT Internal Photos FCC IC Internal Photos pdf 3.27 MiB March 07 2023 / September 04 2023 delayed release
various Internal Photos Internal Photos pdf 1.27 MiB June 05 2023 / September 22 2023
various MT7902- Inpho - 0302 Internal Photos pdf 1.87 MiB March 06 2023 / September 03 2023 delayed release
various 22-2152 EUT External Photos FCC IC External Photos pdf 2.81 MiB March 07 2023 / September 04 2023 delayed release
various External Photos External Photos pdf 2.57 MiB June 05 2023 / September 22 2023
various MT7902- Expho External Photos pdf 324.17 KiB March 06 2023 / September 03 2023 delayed release
various Label Location ID Label/Location Info pdf 37.27 KiB June 05 2023 / September 22 2023
various Label Sample ID Label/Location Info pdf 36.03 KiB June 05 2023 / September 22 2023
various ID Label/Location Info pdf March 06 2023 / March 07 2023
various ID Label/Location Info pdf March 07 2023 / March 08 2023
various Add Equipment Code Cover Letter(s) pdf 273.48 KiB June 05 2023 / September 22 2023
various Agent Authorization Cover Letter(s) pdf 340.09 KiB June 05 2023 / September 22 2023
various Antenna Spec 1 Test Report pdf 866.79 KiB June 05 2023 / September 22 2023
various Antenna Spec 2 Test Report pdf 773.75 KiB June 05 2023 / September 22 2023
various Antenna Spec 3 Test Report pdf 979.36 KiB June 05 2023 / September 22 2023
various Attestation 6CD device Declaration revised 0625 Attestation Statements pdf 212.14 KiB June 26 2023 / September 22 2023
various Confidentiality Request Cover Letter(s) pdf 186.49 KiB June 05 2023 / September 22 2023
various Contact Authorization Cover Letter(s) pdf 356.80 KiB June 05 2023 / September 22 2023
various Cover Letter-Statements of part 2.911 d 5 Attestation Statements pdf 188.45 KiB June 05 2023 / September 22 2023
various Modular Approval Request Cover Letter(s) pdf 151.94 KiB June 05 2023 / September 22 2023
various Original RF Exposure Info SAR RF Exposure Info pdf 1.87 MiB June 05 2023 / September 22 2023
various Original RF Exposure Info SAR Annex A-K RF Exposure Info pdf 3.10 MiB June 05 2023 / September 22 2023
various Original RF Exposure Info SAR Annex Z-1 RF Exposure Info pdf 5.18 MiB June 05 2023 / September 22 2023
various Original RF Exposure Info SAR Annex Z-2 RF Exposure Info pdf 4.72 MiB June 05 2023 / September 22 2023
various Original Test Report 6XD Test Report pdf 3.38 MiB June 05 2023 / September 22 2023
various Original Test Set Up Photos DFS Test Setup Photos pdf 137.96 KiB June 05 2023 / September 22 2023
various RF Exposure Info MPE revised 0913 RF Exposure Info pdf 321.82 KiB September 13 2023 / September 22 2023
various RF Exposure Info SAR revised RF Exposure Info pdf 2.01 MiB June 15 2023 / September 22 2023
various RF Exposure Info SAR Appendix A-Z revised RF Exposure Info pdf 3.75 MiB June 15 2023 / September 22 2023
various Test Report 6CD 1 revised 0913 Test Report pdf 5.49 MiB September 13 2023 / September 22 2023
various Test Report 6CD 2 revised 0913 Test Report pdf 784.75 KiB September 13 2023 / September 22 2023
various Test Report co located Test Report pdf 1018.54 KiB June 05 2023 / September 22 2023
various Test Set Up Photos SAR revised 0628 Test Setup Photos pdf 1.13 MiB June 28 2023 / September 22 2023
various Test Setup Photo Test Setup Photos pdf 1.90 MiB June 05 2023 / September 22 2023
various U.S. local Agent Letter of part 2.911 d 7 Attestation Statements pdf 344.11 KiB June 05 2023 / September 22 2023
various RF Exposure Info pdf March 07 2023 / March 08 2023
various RF Exposure Info pdf March 07 2023 / March 08 2023
various RF Exposure Info pdf March 07 2023 / March 08 2023
various RF Exposure Info pdf March 07 2023 / March 08 2023
various RF Exposure Info pdf March 07 2023 / March 08 2023
various 2302FS14 Appendix E Test Setup Photographs 22-2152 Test Setup Photos pdf 181.64 KiB March 07 2023 / September 04 2023 delayed release
various RF Exposure Info pdf March 07 2023 / March 08 2023
various ICT LA9RF467-CS-H UM3504 Main Test Setup Photos pdf 620.59 KiB March 07 2023 / September 04 2023 delayed release
various Test Report pdf March 07 2023 / March 08 2023
various ICT LA9RF468-CS-H UM3504 Aux Test Setup Photos pdf 635.98 KiB March 07 2023 / September 04 2023 delayed release
various Test Report pdf March 07 2023 / March 08 2023
various INPAQ MDA-LE-01-008 UM3504 Aux Test Setup Photos pdf 159.44 KiB March 07 2023 / September 04 2023 delayed release
various Test Report pdf March 07 2023 / March 08 2023
various INPAQ MDA-LE-02-017 UM3504 Main Test Setup Photos pdf 181.82 KiB March 07 2023 / September 04 2023 delayed release
various Test Report pdf March 07 2023 / March 08 2023
various Cover Letter(s) pdf March 07 2023 / March 08 2023
various Cover Letter(s) pdf March 07 2023 / March 08 2023
various Attestation Statements pdf March 07 2023 / March 08 2023
various FCC Attestation Letter US AGENT (non-US-applicant) RV Attestation Statements pdf 528.70 KiB March 07 2023 / March 08 2023
various Cover Letter(s) pdf March 07 2023 / March 08 2023
various Cover Letter(s) pdf March 07 2023 / March 08 2023
various Cover Letter(s) pdf March 06 2023 / March 07 2023
various Antenna spec Innowave-NB mode 20230220 Test Report pdf 968.93 KiB March 06 2023 / March 07 2023
various Test Report pdf March 06 2023 / March 07 2023
various Test Report pdf March 06 2023 / March 07 2023
various Test Report pdf March 06 2023 / March 07 2023
various Cover Letter(s) pdf March 06 2023 / March 07 2023
various MT7902- Class II Change 20230303 ok Cover Letter(s) pdf 130.43 KiB March 06 2023 / March 07 2023
various Cover Letter(s) pdf March 06 2023 / March 07 2023
various Cover Letter(s) pdf March 06 2023 / March 07 2023
various RF Exposure Info pdf March 06 2023 / March 07 2023
various RF Exposure Info pdf March 06 2023 / March 07 2023
various MT7902- Tsup-SAR Test Setup Photos pdf 271.04 KiB March 06 2023 / September 03 2023 delayed release
various Attestation Statements pdf March 06 2023 / March 07 2023

frequency equipment class purpose
1 2023-09-22 6535 ~ 6855 6CD - 15E 6 GHz Low Power Dual Client Original Equipment
2 2023-03-08 2412 ~ 2472 DTS - Digital Transmission System Class II Permissive Change
3 5955 ~ 7115 6XD - 15E 6 GHz Low Power Indoor Client
4 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
5 5865 ~ 5885 NII - Unlicensed National Information Infrastructure TX
6 2023-03-07 2412 ~ 2472 DTS - Digital Transmission System
7 5865 ~ 5886 NII - Unlicensed National Information Infrastructure TX
8 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
9 5955 ~ 7115 6XD - 15E 6 GHz Low Power Indoor Client
10 2023-02-15 5865 ~ 5885 NII - Unlicensed National Information Infrastructure TX
11 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
12 2412 ~ 2472 DTS - Digital Transmission System
13 5955 ~ 7115 6XD - 15E 6 GHz Low Power Indoor Client
14 2023-01-30 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
15 5955 ~ 7115 6XD - 15E 6 GHz Low Power Indoor Client
16 2412 ~ 2472 DTS - Digital Transmission System
17 5865 ~ 5885 NII - Unlicensed National Information Infrastructure TX
18 2023-01-17 5865 ~ 5885 NII - Unlicensed National Information Infrastructure TX
19 5955 ~ 7115 6XD - 15E 6 GHz Low Power Indoor Client
20 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
21 2412 ~ 2472 DTS - Digital Transmission System
22 2023-01-06 5955 ~ 7115 6XD - 15E 6 GHz Low Power Indoor Client
23 5865 ~ 5885 NII - Unlicensed National Information Infrastructure TX
24 2412 ~ 2472 DTS - Digital Transmission System
25 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
26 2023-01-03 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
27 2412 ~ 2472 DTS - Digital Transmission System
28 5955 ~ 7115 6XD - 15E 6 GHz Low Power Indoor Client
29 5865 ~ 5885 NII - Unlicensed National Information Infrastructure TX
30 2022-11-17 2412 ~ 2472 DTS - Digital Transmission System
31 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
32 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
33 2022-05-03 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Original Equipment
34 2412 ~ 2472 DTS - Digital Transmission System
35 5955 ~ 7115 6XD - 15E 6 GHz Low Power Indoor Client
36 5865 ~ 5885 NII - Unlicensed National Information Infrastructure TX

Application Forms

app s Applicant Information
various Effective 2023-09-22
various 2023-03-08
various 2023-03-07
various 2023-02-15
various 2023-01-30
various 2023-01-17
various 2023-01-06
various 2023-01-03
various 2022-11-17
various 2022-05-03
various Applicant's complete, legal business name MediaTek Inc.
various FCC Registration Number (FRN) 0022707111
various 0022229074
various Physical Address No. 1, Dusing 1st Rd. Hsinchu Science Park
various No. 1, Dusing 1st Rd.
various Hsinchu City, N/A
various Taiwan
app s TCB Information
various TCB Application Email Address c******@telefication.com
various b******@phoenix-testlab.de
various h******@acbcert.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
app s FCC ID
various Grantee Code RAS
various Equipment Product Code MT7902
app s Person at the applicant's address to receive grant or for contact
various Name S********
various Title Manager
various Telephone Number 886-3******** Extension:
various Fax Number 886-3********
various E-mail s******@mediatek.com
app s Technical Contact
various Firm Name Bureau Veritas Consumer Products Services (H.K.) L
various DEKRA
various DEKRA Testing and Certification Co., Ltd
various Bureau Veritas Consumer Products Services (H.K.)
various Name K******** L******
various C****** P******
various Physical Address E-2,no.1,Li Hsin 1st Road, Hsinchu Science Park
various No.5-22, Ruishukeng, Linkou Dist.
various New Taipei City
various Taiwan
various Telephone Number 886 3********
various 886-2********
various +8863********
various Fax Number 886 3********
various 88633********
various E-mail k******@bureauveritas.com
various c******@dekra.com
app s Non Technical Contact
various Firm Name Bureau Veritas Consumer Products Services (H.K.) L
various Bureau Veritas Consumer Products Services (H.K.)
various Name T**** P******
various A****** H********
various Physical Address No.19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan
various No.19, Hwa Ya 2nd Rd., Wen Hwa Vil.
various Taiwan
various Telephone Number 886 3********
various +8863********
various E-mail t******@bureauveritas.com
various a******@bureauveritas.com
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
variousYes
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)09/04/2023
various09/03/2023
various08/12/2023
various07/20/2023
various07/11/2023
various07/05/2023
various06/29/2023
various05/10/2023
various08/15/2022
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment Class6CD - 15E 6 GHz Low Power Dual Client
variousDTS - Digital Transmission System
various6XD - 15E 6 GHz Low Power Indoor Client
variousDSS - Part 15 Spread Spectrum Transmitter
variousNII - Unlicensed National Information Infrastructure TX
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)1TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?Yes
variousNo
variousModular Equipment TypeSingle Modular Approval
variousLimited Single Modular Approval
variousDoes not apply
variousPurpose / Application is forOriginal Equipment
variousClass II Permissive Change
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsThis module is approved in portable/mobile configurations with Antennas as described in the filling. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80/160 MHz bandwidths. Power Density and SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.79 W/kg and 1.56 W/kg, respectively.
variousOutput power listed is conducted. This module is approved in portable/mobile configurations with Antennas as described in the filling. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR value for body transmission use condition is 0.74 W/kg. This device has 20/40 MHz bandwidths. Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: UM3504D, BM3504D, RM3504D, UM3504DA, BM3504DA, RM3504DA; Brand: ASUS, with antenna LUXSHARE-ICT, model no.: LA9RF468- CS-H and LA9RF467-CS-H and INPAQ, model no.: MDA-LE-01-008 and MDA-LE- 02-017. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 1.10 W/kg and 1.10 W/kg at 1g tissues, respectively.
variousOutput power listed is conducted. This module is approved in portable/mobile configurations with Antennas as described in the filling. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.79 W/kg and 1.56 W/kg, respectively. Device operation is intended for indoor use only. This device has 20/40/80/160 MHz bandwidths. Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: UM3504D, BM3504D, RM3504D, UM3504DA, BM3504DA, RM3504DA; Brand: ASUS, with antenna LUXSHARE-ICT, model no.: LA9RF468-CS-H and LA9RF467-CS-H and INPAQ, model no.: MDA-LE-01-008 and MDA-LE-02-017. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.78 W/kg and 1.26 W/kg at 1g tissues, respectively. The highest reported power density is 0.58 mW/cm2
variousOutput power listed is conducted. This module is approved in portable/mobile configurations with Antennas as described in the filling. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.77 W/kg and 1.56 W/kg, respectively. Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: UM3504D, BM3504D, RM3504D, UM3504DA, BM3504DA, RM3504DA; Brand: ASUS, with antenna LUXSHARE-ICT, model no.: LA9RF468- CS-H and LA9RF467-CS-H and INPAQ, model no.: MDA-LE-01-008 and MDA-LE- 02-017. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.64 W/kg and 1.56 W/kg at 1g tissues, respectively.
variousOutput power listed is conducted. This module is approved in portable/mobile configurations with Antennas as described in the filling. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.79 W/kg and 1.56 W/kg, respectively. Device operation is intended for indoor use only. This device has 20/40/80/160 MHz bandwidths. Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: UM3504D, BM3504D, RM3504D, UM3504DA, BM3504DA, RM3504DA; Brand: ASUS, with antenna LUXSHARE-ICT, model no.: LA9RF468-CS-H and LA9RF467-CS-H and INPAQ, model no.: MDA-LE-01-008 and MDA-LE-02-017. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 1.08 W/kg and 1.56 W/kg at 1g tissues, respectively.
variousOutput power listed is conducted. This module is approved in portable/mobile configurations with Antennas as described in the filling. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidths for WLAN transmitter. This C2PC filing establishes portable category for ASUS platform with models: TP3604V, R3604V and J3604V, along with the antennas (main and aux) that are of the same type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 1.04 W/kg and 1.4 W/kg, respectively. Antennas used - PIFA with models of WA-P-LE-02-113 (HQ20605068000) and WA-P- LE-03-010 (HQ20605071000), provided by the vendor of INPAQ; and models of F00192307110001 (HQ2060508L000) and F00192307510002 (HQ2060508K000), provided by the vendor of Innowave.
variousOutput power listed is conducted. This module is approved in portable/mobile configurations with Antennas as described in the filling. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Device operation is intended for indoor use only. This device has 20/40/80/160 MHz bandwidths. This C2PC filing establishes portable category for ASUS platform with models: TP3604V, R3604V and J3604V, along with the antennas (main and aux) that are of the same type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.78 W/kg and 1.4 W/kg, respectively. Antennas used - PIFA with models of WA-P-LE-02-113 (HQ20605068000) and WA-P- LE-03-010 (HQ20605071000), provided by the vendor of INPAQ; and models of F00192307110001 (HQ2060508L000) and F00192307510002 (HQ2060508K000), provided by the vendor of Innowave.
variousOutput power listed is conducted. This module is approved in portable/mobile configurations with Antennas as described in the filling. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This C2PC filing establishes portable category for ASUS platform with models: TP3604V, R3604V and J3604V, along with the antennas (main and aux) that are of the same type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.6 W/kg and 1.4 W/kg, respectively. Antennas used - PIFA with models of WA-P-LE-02-113 (HQ20605068000) and WA-P- LE-03-010 (HQ20605071000), provided by the vendor of INPAQ; and models of F00192307110001 (HQ2060508L000) and F00192307510002 (HQ2060508K000), provided by the vendor of Innowave.
variousOutput power listed is conducted. This module is approved in portable/mobile configurations with Antennas as described in the filling. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Device operation is intended for indoor use only. This device has 20/40/80/160 MHz bandwidths. This C2PC filing establishes portable category for ASUS platform with models: TP3604V, R3604V and J3604V, along with the antennas (main and aux) that are of the same type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.8 W/kg and 1.4 W/kg, respectively. Antennas used - PIFA with models of WA-P-LE-02-113 (HQ20605068000) and WA-P-LE-03-010 (HQ20605071000), provided by the vendor of INPAQ; and models of F00192307110001 (HQ2060508L000) and F00192307510002 (HQ2060508K000), provided by the vendor of Innowave.
variousOutput power listed is conducted. This module is approved in portable/mobile configurations with Antennas as described in the filling. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.79 W/kg and 1.56 W/kg, respectively. Device operation is intended for indoor use only. This device has 20/40/80/160 MHz bandwidths. Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number:M1405Y, D1405Y, Y1405CY.; Brand: ASUS, with antenna INPAQ, model no.: WA-P-LE-02-064 and WA-P-LE-01-006 and Pulse, model no.: TZ20921 and TZ20924. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 1.08 W/kg and 1.30 W/kg at 1g tissues, respectively.
variousOutput power listed is conducted. This module is approved in portable/mobile configurations with Antennas as described in the filling. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.77 W/kg and 1.56 W/kg, respectively. Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number:M1405Y, D1405Y, Y1405CY.; Brand: ASUS, with antenna INPAQ, model no.: WA-P-LE-02-064 and WA-P-LE-01-006 and Pulse, model no.: TZ20921 and TZ20924. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.21 W/kg and 1.30 W/kg at 1g tissues, respectively.
variousOutput power listed is conducted. This module is approved in portable/mobile configurations with Antennas as described in the filling. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR value for body transmission use condition is 0.74 W/kg. This device has 20/40 MHz bandwidths. Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number:M1405Y, D1405Y, Y1405CY.; Brand: ASUS, with antenna INPAQ, model no.: WA-P-LE-02-064 and WA-P-LE-01-006 and Pulse, model no.: TZ20921 and TZ20924. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.75 W/kg and 1.30 W/kg at 1g tissues, respectively.
variousOutput power listed is conducted. This module is approved in portable/mobile configurations with Antennas as described in the filling. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.79 W/kg and 1.56 W/kg, respectively. Device operation is intended for indoor use only. This device has 20/40/80/160 MHz bandwidths. Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number:M1405Y, D1405Y, Y1405CY.; Brand: ASUS, with antenna INPAQ, model no.: WA-P-LE-02-064 and WA-P-LE-01-006 and Pulse, model no.: TZ20921 and TZ20924. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.54 W/kg and 1.30 W/kg at 1g tissues, respectively. The highest reported power density is 0.63 mW/cm2
variousOutput power listed is conducted. This module is approved in portable/mobile configurations with Antennas as described in the filling. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.77 W/kg and 1.56 W/kg, respectively. <br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: TP3402V, J3402V R3402V, P3402FV.; Brand: ASUS, with antenna INPAQ, model no.: WA-P-LE- 03-003 and WA-P-LE-02-071; antenna INNOWAVE, model no.: F00168007510002 and F00168007110001. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.51 W/kg and 1.49 W/kg at 1g tissues, respectively.
variousOutput power listed is conducted. This module is approved in portable/mobile configurations with Antennas as described in the filling. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.79 W/kg and 1.56 W/kg, respectively. Device operation is intended for indoor use only. This device has 20/40/80/160 MHz bandwidths. <br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: TP3402V, J3402V R3402V, P3402FV.; Brand: ASUS, with antenna INPAQ, model no.: WA-P-LE- 03-003 and WA-P-LE-02-071; antenna INNOWAVE, model no.: F00168007510002 and F00168007110001. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.67 W/kg and 1.18 W/kg at 1g tissues, respectively. The highest reported power density is 0.64 mW/cm2
variousOutput power listed is conducted. This module is approved in portable/mobile configurations with Antennas as described in the filling. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR value for body transmission use condition is 0.74 W/kg. This device has 20/40 MHz bandwidths. <br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: TP3402V, J3402V R3402V, P3402FV.; Brand: ASUS, with antenna INPAQ, model no.: WA-P-LE- 03-003 and WA-P-LE-02-071; antenna INNOWAVE, model no.: F00168007510002 and F00168007110001. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.82 W/kg and 1.49 W/kg at 1g tissues, respectively.
variousOutput power listed is conducted. This module is approved in portable/mobile configurations with Antennas as described in the filling. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.79 W/kg and 1.56 W/kg, respectively. Device operation is intended for indoor use only. This device has 20/40/80/160 MHz bandwidths. <br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: TP3402V, J3402V R3402V, P3402FV.; Brand: ASUS, with antenna INPAQ, model no.: WA-P-LE-03- 003 and WA-P-LE-02-071; antenna INNOWAVE, model no.: F00168007510002 and F00168007110001. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 1.00 W/kg and 1.49 W/kg at 1g tissues, respectively.
variousOutput power listed is conducted. This module is approved in portable/mobile configurations with Antennas as described in the filling. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.79 W/kg and 1.56 W/kg, respectively. Device operation is intended for indoor use only. This device has 20/40/80/160 MHz bandwidths. Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: TN3402Y, J3402Y, R3402Y, Y3402FY.; Brand: ASUS, with antenna INPAQ, model no.: WA-P-LE-02-071, WA-P-LE-03-003 and INNOWAVE, model no.: HQ20604865000, HQ20604862000. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 1.05 W/kg and 1.53 W/kg at 1g tissues, respectively.
variousOutput power listed is conducted. This module is approved in portable/mobile configurations with Antennas as described in the filling. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.79 W/kg and 1.56 W/kg, respectively. Device operation is intended for indoor use only. This device has 20/40/80/160 MHz bandwidths. Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: TN3402Y, J3402Y, R3402Y, Y3402FY.; Brand: ASUS, with antenna INPAQ, model no.: WA-P-LE-02-071, WA-P-LE-03-003 and INNOWAVE, model no.: HQ20604865000, HQ20604862000. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.76 W/kg and 1.24 W/kg at 1g tissues, respectively. The highest reported power density is 0.67 mW/cm2
variousOutput power listed is conducted. This module is approved in portable/mobile configurations with Antennas as described in the filling. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.77 W/kg and 1.56 W/kg, respectively. Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: TN3402Y, J3402Y, R3402Y, Y3402FY.; Brand: ASUS, with antenna INPAQ, model no.: WA-P-LE-02-071, WA-P-LE-03-003 and INNOWAVE, model no.: HQ20604865000, HQ20604862000. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.48 W/kg and 1.53 W/kg at 1g tissues, respectively.
variousOutput power listed is conducted. This module is approved in portable/mobile configurations with Antennas as described in the filling. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR value for body transmission use condition is 0.74 W/kg. This device has 20/40 MHz bandwidths. Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: TN3402Y, J3402Y, R3402Y, Y3402FY.; Brand: ASUS, with antenna INPAQ, model no.: WA-P-LE-02-071, WA-P-LE-03-003 and INNOWAVE, model no.: HQ20604865000, HQ20604862000. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.69 W/kg and 0.69 W/kg at 1g tissues, respectively.
variousOutput power listed is conducted. This module is approved in portable/mobile configurations with Antennas as described in the filling. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. Device operation is intended for indoor use only. This device has 20/40/80/160 MHz bandwidths. Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host of ASUS laptop, model number: TN3604Y, TN3604Y and R3604Y with the antenna INPAQ, part no. WA-P-LE-02-113 (HQ20605068000), WA-P-LE-03-010 (HQ20605071000) and antenna Innowave, part no. F00192307110001, F00192307510002. The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 0.36 W/kg and 0.56 W/kg respectively.
variousOutput power listed is conducted. This module is approved in portable/mobile configurations with Antennas as described in the filling. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Device operation is intended for indoor use only. RF exposure compliance. SAR testing was performed to demonstrate RF exposure compliance. This device has 20/40/80/160 MHz bandwidths. Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host of ASUS laptop, model number: TN3604Y, TN3604Y and R3604Y with the antenna INPAQ, part no. WA-P-LE-02-113 (HQ20605068000), WA-P-LE-03-010 (HQ20605071000) and antenna Innowave, part no. F00192307110001, F00192307510002. The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 0.92 W/kg and 1.12 W/kg respectively.
variousOutput power listed is conducted. This module is approved in portable/mobile configurations with Antennas as described in the filling. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance. SAR testing was performed to demonstrate RF exposure compliance. This device has 20/40 MHz bandwidths. Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host of ASUS laptop, model number: TN3604Y, TN3604Y and R3604Y with the antenna INPAQ, part no. WA-P-LE-02-113 (HQ20605068000), WA-P-LE-03-010 (HQ20605071000) and antenna Innowave, part no. F00192307110001, F00192307510002. The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 0.59 W/kg and 1.12 W/kg respectively.
variousOutput power listed is conducted. This module is approved in portable/mobile configurations with Antennas as described in the filling. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance. SAR testing was performed to demonstrate RF exposure compliance. Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host of ASUS laptop, model number: TN3604Y, TN3604Y and R3604Y with the antenna INPAQ, part no. WA-P-LE-02-113 (HQ20605068000), WA-P-LE-03-010 (HQ20605071000) and antenna Innowave, part no. F00192307110001, F00192307510002. The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 0.20 W/kg and 1.12 W/kg respectively.
variousOutput power listed is conducted. This module is approved in portable/mobile configurations with Antennas as described in the filling. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.RF exposure compliance. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.77 W/kg and 1.56 W/kg, respectively. <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: X1405Z, F1405Z, R1405Z, A1405Z, P1405CZ, X1405V, F1405V, R1405V, A1405V, P1405CV.; Brand: ASUS, with antenna INPAQ, model no.: WA- P-LE-01-006, WA-P-LE-02-064 and Pulse, model no.: TZ20924, TZ20921. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.24 W/kg and 1.24 W/kg at 1g tissues, respectively. <br>
variousOutput power listed is conducted. This module is approved in portable/mobile configurations with Antennas as described in the filling. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR value for body transmission use condition is 0.74 W/kg. This device has 20/40 MHz bandwidths. <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: X1405Z, F1405Z, R1405Z, A1405Z, P1405CZ, X1405V, F1405V, R1405V, A1405V, P1405CV.; Brand: ASUS, with antenna INPAQ, model no.: WA- P-LE-01-006, WA-P-LE-02-064 and Pulse, model no.: TZ20924, TZ20921. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.48 W/kg and 1.24 W/kg at 1g tissues, respectively.
variousOutput power listed is conducted. This module is approved in portable/mobile configurations with Antennas as described in the filling. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.79 W/kg and 1.56 W/kg, respectively. Device operation is intended for indoor use only. This device has 20/40/80/160 MHz bandwidths. <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: X1405Z, F1405Z, R1405Z, A1405Z, P1405CZ, X1405V, F1405V, R1405V, A1405V, P1405CV.; Brand: ASUS, with antenna INPAQ, model no.: WA-P-LE-01-006, WA-P-LE-02- 064 and Pulse, model no.: TZ20924, TZ20921. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 1.17 W/kg and 1.24 W/kg at 1g tissues, respectively.The highest reported power density is 0.86 mW/cm2
variousOutput power listed is conducted. This module is approved in portable/mobile configurations with Antennas as described in the filling. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.79 W/kg and 1.56 W/kg, respectively. Device operation is intended for indoor use only. This device has 20/40/80/160 MHz bandwidths. <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: X1405Z, F1405Z, R1405Z, A1405Z, P1405CZ, X1405V, F1405V, R1405V, A1405V, P1405CV.; Brand: ASUS, with antenna INPAQ, model no.: WA-P-LE-01-006, WA-P-LE- 02-064 and Pulse, model no.: TZ20924, TZ20921. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 1.15 W/kg and 1.22 W/kg at 1g tissues, respectively.
variousC2PC: Disabling 5.9GHz &amp; 6GHz by software for diversity sku and Adding 4 dipole antennas for the sku. Output power listed is conducted. This module is approved in portable/mobile configurations with Antennas as described in the filling. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR value for body transmission use condition is 0.74 W/kg. This device has 20/40 MHz bandwidths.
variousC2PC: Disabling 5.9GHz &amp; 6GHz by software for diversity sku and Adding 4 dipole antennas for the sku. Output power listed is conducted. This module is approved in portable/mobile configurations with Antennas as described in the filling. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.77 W/kg and 1.56 W/kg, respectively.
variousC2PC: Disabling 5.9GHz &amp; 6GHz by software for diversity sku and Adding 4 dipole antennas for the sku. Output power listed is conducted. This module is approved in portable/mobile configurations with Antennas as described in the filling. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.79 W/kg and 1.56 W/kg, respectively. Device operation is intended for indoor use only. This device has 20/40/80/160 MHz bandwidths.
variousOutput power listed is conducted. This module is approved in portable/mobile configurations with Antennas as described in the filling. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.77 W/kg and 1.56 W/kg, respectively.
variousOutput power listed is conducted. This module is approved in portable/mobile configurations with Antennas as described in the filling. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR value for body transmission use condition is 0.74 W/kg. This device has 20/40 MHz bandwidths.
variousOutput power listed is conducted. This module is approved in portable/mobile configurations with Antennas as described in the filling. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.79 W/kg and 1.56 W/kg, respectively. Device operation is intended for indoor use only. This device has 20/40/80/160 MHz bandwidths.
variousOutput power listed is conducted. This module is approved in portable/mobile configurations with Antennas as described in the filling. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.79 W/kg and 1.56 W/kg, respectively. Device operation is intended for indoor use only. This device has 20/40/80/160 MHz bandwidths.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
various Eurofins E&E Wireless Taiwan Co., Ltd.
various DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou
various Eurofins E&E Wireless Taiwan Co., Ltd
various Name R****** C******
various F******** L****
various M****** L****
various Telephone Number +886-********
various 88632******** Extension:
various +886-******** Extension:
various 886-3********
various +886-********
various +886-********
various Fax Number +886-********
various 88632********
various +886-********
various 886-3********
various +886-********
various +886-********
various E-mail r******@bureauveritas.com
various F******@eurofins.com
various m******@dekra.com
various f******@atl-lab.com.tw
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15E CC EP 5955 7115 0.107
1 2 15E CC EP 5955 6415 0.91
1 3 15E CC EP 6535 6855 0.895
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC 2402 2480 0.088
2 2 15C CC 2412 2472 0.33
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15E CC 5955.00000000 7115.00000000 0.0370000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC 2402.00000000 2480.00000000 0.0830000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15E CC 5180 5240 0.147
5 2 15E CC ND 5260 5320 0.155
5 3 15E CC ND 5500 5720 0.159
5 4 15E CC 5745 5825 0.177
5 5 15E CC EP 5865 5885 0.533
5 6 15E CC EP 5845 5845 0.259
5 7 15E CC EP 5835 5835 0.6
5 8 15E CC EP 5855 5855 0.324
5 9 15E CC EP 5815 5815 0.106
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15C CC 2402 2480 0.088
6 2 15C CC 2412 2472 0.33
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15E CC 5180 5240 0.147
7 2 15E CC ND 5260 5320 0.155
7 3 15E CC ND 5500 5720 0.159
7 4 15E CC 5745 5825 0.177
7 5 15E CC EP 5865 5886 0.533
7 6 15E CC EP 5845 5845 0.259
7 7 15E CC EP 5835 5835 0.6
7 8 15E CC EP 5855 5855 0.324
7 9 15E CC EP 5815 5815 0.106
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15C CC 2402.00000000 2480.00000000 0.0830000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15E CC 5955.00000000 7115.00000000 0.0370000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15E CC 5180 5240 0.147
10 2 15E CC ND 5260 5320 0.155
10 3 15E CC ND 5500 5720 0.159
10 4 15E CC 5745 5825 0.177
10 5 15E CC EP 5865 5885 0.533
10 6 15E CC EP 5845 5845 0.259
10 7 15E CC EP 5835 5835 0.6
10 8 15E CC EP 5855 5855 0.324
10 9 15E CC EP 5815 5815 0.106
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15C CC 2402.00000000 2480.00000000 0.0830000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15C CC 2402 2480 0.088
12 2 15C CC 2412 2472 0.33
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15E CC 5955.00000000 7115.00000000 0.0370000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15C CC 2402.00000000 2480.00000000 0.0830000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15E CC 5955.00000000 7115.00000000 0.0370000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
16 1 15C CC 2402 2480 0.088
16 2 15C CC 2412 2472 0.33
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
17 1 15E CC 5180 5240 0.147
17 2 15E CC ND 5320 5320 0.155
17 3 15E CC ND 5500 5720 0.159
17 4 15E CC 5745 5825 0.177
17 5 15E CC EP 5865 5885 0.533
17 6 15E CC EP 5845 5845 0.259
17 7 15E CC EP 5835 5835 0.6
17 8 15E CC EP 5855 5855 0.324
17 9 15E CC EP 5815 5815 0.106
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
18 1 15E CC 5180 5240 0.147
18 2 15E CC ND 5260 5320 0.155
18 3 15E CC ND 5500 5720 0.159
18 4 15E CC 5745 5825 0.177
18 5 15E CC EP 5865 5885 0.533
18 6 15E CC EP 5845 5845 0.259
18 7 15E CC EP 5835 5835 0.6
18 8 15E CC EP 5855 5855 0.324
18 9 15E CC EP 5815 5815 0.106
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
19 1 15E CC 5955.00000000 7115.00000000 0.0370000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
20 1 15C CC 2402.00000000 2480.00000000 0.0830000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
21 1 15C CC 2402 2480 0.088
21 2 15C CC 2412 2472 0.33
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
22 1 15E CC 5955.00000000 7115.00000000 0.0370000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
23 1 15E CC 5180 5240 0.147
23 2 15E CC ND 5260 5320 0.155
23 3 15E CC ND 5500 5720 0.159
23 4 15E CC 5745 5825 0.177
23 5 15E CC EP 5865 5885 0.533
23 6 15E CC EP 5845 5845 0.259
23 7 15E CC EP 5835 5835 0.6
23 8 15E CC EP 5855 5855 0.324
23 9 15E CC EP 5815 5815 0.106
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
24 1 15C CC 2402 2480 0.088
24 2 15C CC 2412 2472 0.33
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
25 1 15C CC 2402.00000000 2480.00000000 0.0830000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
26 1 15C CC 2402.00000000 2480.00000000 0.0830000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
27 1 15C CC 2402 2480 0.088
27 2 15C CC 2412 2472 0.33
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
28 1 15E CC 5955.00000000 7115.00000000 0.0370000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
29 1 15E CC 5180 5240 0.147
29 2 15E CC ND 5260 5320 0.155
29 3 15E CC ND 5500 5720 0.159
29 4 15E CC 5745 5825 0.177
29 5 15E CC EP 5865 5885 0.533
29 6 15E CC EP 5845 5845 0.259
29 7 15E CC EP 5835 5835 0.6
29 8 15E CC EP 5855 5855 0.324
29 9 15E CC EP 5815 5815 0.106
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
30 1 15C CC 2402 2480 0.088
30 2 15C CC 2412 2472 0.33
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
31 1 15C CC 2402.00000000 2480.00000000 0.0830000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
32 1 15E CC 5180 5240 0.147
32 2 15E CC ND 5260 5320 0.155
32 3 15E CC ND 5500 5720 0.159
32 4 15E CC 5745 5825 0.177
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
33 1 15C CC 2402.00000000 2480.00000000 0.0830000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
34 1 15C CC 2402 2480 0.088
34 2 15C CC 2412 2472 0.33
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
35 1 15E CC 5955.00000000 7115.00000000 0.0370000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
36 1 15E CC 5180 5240 0.147
36 2 15E CC ND 5260 5320 0.155
36 3 15E CC ND 5500 5720 0.159
36 4 15E CC 5745 5825 0.177
36 5 15E CC EP 5865 5885 0.533
36 6 15E CC EP 5845 5845 0.259
36 7 15E CC EP 5835 5835 0.6
36 8 15E CC EP 5855 5855 0.324
36 9 15E CC EP 5815 5815 0.106

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC