Limitless powerstation User Manual Whats included 1) USB C wall charger 2) Charging dock 3) 10000mah powerbank 4) Usb c to c 2.0 cable Tech Specs 1) Type c wall charger Input110V~240VAC,50/60Hz,1.6A Output12VDC 3.67A ,44W 2) Charging docking 1.TYPE-C3 input12V/3.67A 2.TYPE-C1 Output5V/3A9V/2.22A12V/1.67 PD20W 3.TYPE-C2 Output5V/3A9V/2.22A12V/1.67 PD20W 4.USB-A1 Output5V/3A9V/2A12V/1.5 QC3.0 18W 5.USB-A2 Output 5V/3A9V/2A12V/1.5 QC3.0 18W 6.USB-A1 + TYPE-C1 Output:5V/3A 15W MAX 7.USB-A2 + TYPE-C2 Output:5V/3A 15W MAX 8.USB-A1 + USB-A2 OutputQC3.0 18W + QC3.0 18W TOATL 36W 9.TYPE-C1 + TYPE-C2 OutputPD 20W + PD 20W total 40W 10.USB-A1 + TYPE-C1 + USB-A2 Output5V/3A + QC 18W TOTAL 31W 11.USB-A1 + TYPE-C1 + TYPE-C2 Output5V/3A + PD 20W TOTAL 35W 12.USB-A2 + TYPE-C2 + USB-A1 Output5V/3A + QC 18W TOTAL 31W 13.USB-A2 + TYPE-C2 + TYPE-C1 Output5V/3A + PD 18W TOTAL 35W 14.TYPE-C1 + TYPE-C2 +USB-A1 +USB-A2 Outputtotal 30W MAX 3) 10000Mah wireless powerbank Capacity10000mah TYPE-C1 input5V/3A9V/2A12V/1.5A PD 18W TYPE-C1 Output 5V/3A9V/2A12V/1.5A PD 18W USB-A1 Output5V/2.4A USB-A2 Output5V/3A9V/2A12V/1.5A QC3.0 18W wireless charging Output5W//7.5W/10W MAX USB-A1 + USB-A2 + TYPE-C1 Output18W + 10W TOTAL 28W MAX 4) USB C to C 2.0 cable MaterialPVC length1M OD:3.0 Data transfer speed480Mbps Use steps:
1. Connect the USB TYPE C cable between the wireless charging dock and Type c wall charger ,plug in the type c wall chargerthe led light shows Red. And put the wireless power bank on the charging dock,the led light shows Red 2. To set up the clock, A. Press and hold the left button "M" for 3 seconds until the clock hour unit flashes and then press "-" "+" to adjust the hour duration. B. Press and hold the left button "M" for 3 seconds until the clock hour unit flashes, then press "M" once to adjust the minutes and press "M" once to confirm. 3. Put the your device in the charging area, try put it near the charging centre as close as possible 4. Put the your devicewith wireless receiving boardon the wireless charger shows Red light 5. The receiving device is removed from wall chargershows flash light Light status 1. Power onRed light 2. Stand byRed light 3. On chargingRed light 4. No wall charger connect to the charging dock:flash red light Standard Accessories 10000mah wireless power bank*1 Type c wall charger*1 Charging dock*1 User manual*1 Usb C to C charging cable*1 Attention 1. This product must be used as required, otherwise it will cause a fire, explosion and other danger risks. 2. Check the power adapter parameters are with reliable quality and security before, whether the CHARGER is quick chargerQC2.0/QC3.0or not, as this may cause to no charge or low charge and may even damage the power adapter 3. Check the usb cable is suitable connector for connections, make sure the charging cable should meet the current on 2A,or it will cause no charge or low charge, negative phenomena such as frequent start 4. Do not pull the AC adapter out with wet hands, ensure the safety and integrity of the adapter;
5. Do not let the dust or other things accumulate on the product and the AC adapter;
6. Do not use the product outside the temperature-20 to 40 ;
7. Do not attempt to open, throw, hit or shake the wireless charger 8. Ensure the charging platforms and devices are not overheating, such as overheating, please cut off the power supply, to cool before attempting to charge If your protective case is thickremove it before placing your device on the wireless charger 9. Warming Dont intestinally disassemble and maintenance the product if non-professional. Removing the product may result in damage that beyond the warranty. Battery Warming replacement of a battery with an incorrect type may defeat a safeguard;
disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, may result in an explosion;
leaving a battery in an extremely high temperature surrounding environment, such as sunshine, fire, or hot surface may result in an explosion or the leakage of flammable liquid or gas;
a battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
Risk of fire or explosion if the battery is replaced by an incorrect type!
FCC Warming This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
(2) Reorient or relocate the receiving antenna.
(3) Increase the separation between the equipment and receiver.
(4) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
(5) Consult the dealer or an experienced radio/TV technician for help. RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.