all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
User Manual | Users Manual | 805.66 KiB | ||||
1 2 | Cover Letter(s) | |||||||
1 2 | External Photos | |||||||
1 2 | ID Label/Location Info | |||||||
1 2 | Internal Photos | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Test Report | |||||||
1 2 | Test Setup Photos | |||||||
1 2 | Cover Letter(s) |
1 2 | User Manual | Users Manual | 805.66 KiB |
u s e r s m a n u a l 10 11 12 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. Protect the power cord from being walked on or pinched, particu-
larly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specified by the manu-
facturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. To completely disconnect this equipment from the AC mains, dis-
connect the power supply cord plug from the AC receptacle. The mains plug of the power supply cord shall remain readily oper-
able. To prevent overheating, do not cover the apparatus. Install in accordance with the manufacturers instructions. No naked flame sources, such as candles, should be placed on the product. Do not expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the apparatus. For apparatus mounted to wall, the apparatus shall be installed on solid wood, bricks, concrete or solid wood columns and battens. DO NOT overload wall outlets or extension cords beyond their rated capacity as this can cause electric shock or fire. Minimum distances around the apparatus for sufficient ventilation. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths,curtains, etc. Do not ingest the battery, Chemical Burn Hazard. Avoid exposure to extreme heat or cold. This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth. Do Not Open! Risk of Electrical Shock. Voltages in this equip-
ment are hazardous to life. No user-serviceable parts inside. Refer all servicing to qualified service personnel. To prevent fire or shock hazard, do not expose this module to moisture. The lightning bolt flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the pres-
ence of potentially dangerous voltage within the products enclosure that may be of sufficient magni-
tude to constitute a risk of electric shock to persons. The exclamation point within an equi-
lateral triangle is intended to alert the user to the presence of important oper-
ating and maintenance (servicing) instructions in the literature accompanying the appliance. MOTION VISION X Tested to comply with FCC standards. FOR HOME OR OFFICE USE IMPORTANT SAFETY INSTRUCTIONS!
1 2 3 4 5 6 7 Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat regis-
ters, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third ground-
ing prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 8 9 2 least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and install-
ers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. 5GHz RF DEVICE STATEMENT: This device operates in the 5.15 5.25GHz frequency range and is restricted to indoor use only. CANADA, INDUSTRY CANADA (IC) NOTICES: This Class B digi-
tal apparatus complies with Canadian ICES-003 and RSS-247. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. RADIO FREQUENCY (RF) EXPOSURE INFORMATION: The radi-
ated output power of the Wireless product is below the Industry Canada
(IC) radio frequency exposure limits. The Wireless product should be used in such a manner such that the potential for human contact during normal operation is minimized. This device has also been evaluated and shown compliant with the IC RF Exposure limits under mobile exposure conditions.
(antennas are greater than 20cm from a persons body). WARNING: This product is intended to be operated ONLY from the AC Voltages listed on the back panel or included power supply of the prod-
uct. Operation from other voltages other than those indicated may cause irreversible damage to the product and void the product warranty. The use of AC Plug Adapters is cautioned because it can allow the product to be plugged into voltages in which the product was not designed to operate. If the product is equipped with a detachable power cord, use only the type provided with your product or by your local distributor and/or retailer. If you are unsure of the correct operational voltage, please contact your local distributor and/or retailer. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Approved under the verification provision of FCC Part 15 as a Class B Digital Device. Any changes or modifications not expressly approved by the grantee of this device could void the users authority to operate the equipment. RF EXPOSURE WARNING: This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at 3 WEEE NOTICE Note: This mark applies only to countries within the European Union (EU) and Norway. In accordance with the European Union WEEE (Waste Electrical and Electronic Equipment) directive 2002/96/EC effective August 13, 2005, we would like to notify you that this product may contain regulated materials which upon disposal, according to the WEEE directive, require special reuse and recycling processing. For this reason Martin Logan has arranged with our distributors in European Union member nations to collect and recycle this product at no cost to you. To find your local distributor please contact the dealer from whom you pur-
chased this product, email info@martinlogan.com or visit the distributor locator at www.martinlogan.com. Please note, only this product itself falls under the WEEE directive. When dis-
posing of packaging and other related shipping materials we encourage you to recycle these items through the normal channels. WARNING/CAUTION!
Hazardous voltages exist insidedo not remove cover. Refer servicing to a qualified technician. To prevent fire or shock hazard, do not expose this module to moisture. Unplug speaker should any abnormal conditions occur. Turn speaker off before making or breaking any signal connections!
The power cord should not be installed, removed, or left detached from the speaker while the other end is connected to an AC power source. No candles or other sources of open flame should be placed on the speaker. No liquids either in glasses or vases should be placed on speaker. Speaker should not be exposed to dripping or splashing liquids. The terminals marked with the lightning bolt symbol should be connected by an instructed person or by way of ready made terminals. The power cord should remain readily operable should any abnormal conditions occur. Any changes or modifications not expressly approved by the grantee of this device could void the users authority to operate the equipment. Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Windows is a registered trademark of Microsoft Corporation in the United States and other countries. For DTS patents, see http://patents.dts.com. Man-
ufactured under license from DTS Licensing Limited. DTS, Play-Fi, the Symbol, and Play-Fi together in combination with the Symbol are trademarks of DTS, Inc. DTS and Play-Fi are registered trademarks of DTS, Inc. DTS, Inc. All Rights Reserved. AirPlay, iPad, iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., regis-
tered in the U.S. and other countries. AirPlay works with iPhone, iPad, and iPod touch with iOS 4.3.3 or later, Mac with OS X Mountain Lion, and Mac and PC with iTunes 10.2.2 or later. iPad mini, iPod touch (3rd through 5th genera-
tion), and iPod nano (5th through 7th generation). Made for iPod, Made for iPhone, and Made for iPad mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certi-
4 fied by the developer to meet Apple performance standards. Apple is not responsible for the opera-
tion of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance. Made for:
iPhone 6 Plus iPhone 6 iPhone 5s iPhone 5c iPad Air 2 iPad mini 3 IntroductIon and overvIew Thank youthe MartinLogan owner, for loving what we do, and making it possible for us to do what we love. MartinLogans dedicated in-house engineering and design team developed the Bravado speaker and Forte amplifier to deliver exceptional audio performance for wireless streaming applications, easily integrated and installed in a diverse variety of environments. The Bravado speaker produces an enveloping field of richly detailed audio incorporating two tweeters (fea-
turing MartinLogans award-winning Folded Motion technology), a high-performance woofer, and dedi-
cated class-D amplification representing 400 watts
(peak) of total system power. Placement The Forte amplifier features two channels of dedicated class-D amplification providing 2 x 200 watts (peak) o allowing you to bring wireless streaming to your exist-
ing loudspeakers. Anthem Room Correction (ARC) allows you to analyze the acoustic response of your listening envi-
ronment and adjust output for optimal performance. Additionally, for a fully authentic audio experience, the Bravado and Forte make connecting a dedicat-
ed subwoofer simple. We recommend locating the speaker on a surface that provides a wide, level, and stable platform such as a table or audio/video rack. Please note, this speaker is not magnetically shielded and there-
fore should not be placed directly beneath or on top of a CRT (cathode ray tube) television. The magnetic field of the speaker will not affect plasma and LCD style televisions. connectIon WARNING! Turn your speaker off before making or breaking any sig-
nal connections! WARNING! The power cord should not be installed, removed, or left detached from the speaker while the other end is connected to an AC power source. power supplied in any subsequent location is suit-
able before connecting and operating the device. Substantially impaired performance or severe damage may occur to the speaker if operation is attempted from an incorrect AC power source. AC POWER CONNECTION The power cord should be firmly inserted into the AC power receptacle on the rear of the wireless product, and then to any convenient AC wall outlet. If you remove your wireless product from the country of original sale, be certain that the AC SIGNAL CONNECTION Connections are made at the signal input sec-
tion on the rear electronics panel of the wireless product. Your speaker features the following audio inputs:
Ethernet connection: used for streaming audio from DTS Play-Fi, Apple AirPlay or DLNA. 5 Fig. 1 Forte Controls and Rear Connection Panel 6 Wi-fi connection: used for streaming audio from DTS Play-Fi, Apple AirPlay or DLNA. Analog In: On the Bravado speaker, this input will accept a standard 3.5mm stereo headphone style plug. On the Forte amplifier, this input will accept standard stereo RCA connections. Please note, when utilizing this speaker to repro-
duce audio from a television via the speakers Auxiliary (digital or analog) connection, the tele-
visions audio output should be defeated. Some televisions will allow you to turn off the internal speaker via the televisions menu system. Other televisions may require you to turn the televisions volume to zero or mute. Please refer to your televisions manual. NETWORK CONNECTION To stream audio to your speaker or amp, a LAN
(local area network) connection is required. This connection can be established using Wi-Fi or Ethernet. Refer to the wireless setup section of this manual for setup and usage details. SUBWOOFER CONNECTION You may choose to employ a separate subwoofer to enhance bass performance. Subwoofers can be connected via the speakers Sub Out RCA connection. We recommend using a superb MartinLogan subwoofer. Using a high-quality RCA style cable designed for subwoofer connection, connect Sub Out from the speaker to the LFE In/Sub In on the subwoofer. Reference your subwoofers manual to learn how to properly adjust the subs level and phase con-
trols to achieve proper blending with the speaker. If you are not running ARC (Anthem Room Correction) the subwoofers crossover should be set to 100Hz. If you will be running ARC, set the subwoofers crossover to bypass or LFE and for subwoofers that do not have a bypass or LFE crossover set-
ting, adjust the crossover to its highest setting. Run ARC after connecting and adjusting the subwoofer. Using a MartinLogan Dynamo Subwoofer:
If using a MartinLogan Dynamo family subwoofer, we recommend beginning with the following sub-
woofer settings:
Low-pass: Bypass Phase: 0 Volume: Knob set to vertical (12-oclock to 1-oclock position) connectIng SPeakerS to the Forte amPlIFIer WARNING! Use Class 2 wir-
ing only. CAUTION: Do not connect speakers, which are rated less than 4 Ohms to the Forte amplifier. CAUTION: While making connections with bare wire, ensure that none of your bare wire comes in contact with a an adjacent terminal. The speakers to be connected to the Forte amplifier should be rated to handle at least 75 Watts for 8 Ohm speakers and at least 150 Watts for 4 Ohm speakers. Your Forte amplifiers binding posts can be used with banana, plug connectors, and bare wire. IMPORTANT! Correct polarity (or phase) is critical for proper soundstage imaging and bass perfor-
mance. Connect one speaker at a time to ensure 7 Fig. 2 Bravado Controls and Rear Connection Panel 8 proper connection of every channel. The red (+) amplifier terminal must be connected to the red (+) speaker terminal. The same applies to the black () terminals. Make sure all wires are firmly fastened. Repeat this connection procedure for each speaker in your system. IMPORTANT! If you hear a distinct lack of bass and a dislocated stereo image then one or more of your speakers may be connected out of phase
(polarity is reversed). Re-check to ensure that each speakers cable is connected with correct polarity:
red (+) to red (+) and black () to black (). BARE WIRE CONNECTORS If you are using speaker wire without banana plugs, simply press in the spring loaded binding post to expose the connection hole. Insert the stripped end of the speaker wire into the hole, then release the binding post. The exposed speaker wire should be securely gripped by the binding post. BANANA PLUG CONNECTORS If you are using banana plugs, remove the end caps from the Forte amplifiers binding posts to expose the banana plug socket; insert the banana plug into the socket. controlS POWER: Press and release to turn the product on/off. this button a second time or pressing either volume button will restore the previous volume setting. Press and hold the power button for 3 seconds to reboot your wireless product. Press and hold the power button for 10 seconds to reset your wireless product to factory settings and clear the network configuration. Your wireless product will enter Standby Mode
(reduced power consumption) after 20 minutes of no music playing. It will automatically wake-up when it senses music being received. The Power button will stay illuminated whether the unit is pow-
ered on or in Standby Mode. If there is a power failure while your wireless product is switched on, it will switch back on once power has been restored. VOLUME UP / DOWN:
Press once to turn volume up/
down. Press and hold to ramp the volume up/down. If you are using ARC (Anthem Room Correction) press and hold the mute button for 5 seconds to turn off ARC on/off. A negative tone will sound to verify ARC is switched off. A positive tone will sound to verify ARC is switched on. INPUT: Switches to the rear panel analog input. This button illuminates white when streaming mode is enabled and blue when the ana-
log input is enabled. If the wireless product is set to analog input and detects a new audio stream, it will automatically switch to streaming mode. WI-FI INDICATOR: The Wi-Fi Indicator tells you what your wireless product is doing. Rapid Blinking: booting up. Blinking: connecting to a wireless router. Slow Pulse: Access Point Setup Mode. Two Blinks & Pause: WPS (Wi-Fi Protected Setup) Mode. MUTE: Press and release to mute the MartinLogan wireless product. Pressing Solid: Connected to a wireless router. Off: Connected to a router via Ethernet. 9 POSITION SWITCH (BRAVADO ONLY):
The rear of the Bravado speaker features a switch that allows you to customize the output of the speak-
er for specific applications. If the speaker is being used for stereo output, set this switch to stereo. If a stereo pair of the speakers are being used in a 2-channel application, set the switch to left or right depending on the speakers position. an overvIew oF connectIonS Analog Left/Right RCA: [Forte amplifier] The analog input on the Forte amplifier can accept an analog stereo signal through a cable using RCA connectors. An ana-
log RCA cable can only pass a single channel of audio information between a source component and audio output device. To achieve two-channels of audio (left/right), you will find that analog RCA cables come bundled as a stereo pair (two connectors on each end). Analog Left/Right 3 .5mm Stereo Headphone Style Jack: [Bravado speaker] The analog input on the Bravado speaker can accept an analog stereo signal through a cable using a 3.5mm headphone style connector. Users may find source components such as digital media players and docks also utilize a 3.5mm headphone style connector. These devices also have a volume control that increases or decreases the level of the output signal. Analog Left/Right RCA to Stereo 3.5mm: [Forte amplifier and Bravado speaker]. Users may find they need to connect an audio source with 3.5mm headphone style jack to the RCA inputs on the Forte amplifier, or connect an audio source with RCA outputs to the 3.5mm input on the Bravado speaker. To connect to these devices use a Left/Right RCA to stereo 3.5mm cable. Ethernet: This cable allows you to physically connect a device to a LAN (local area network). When connected to a LAN, audio information can be sent to this speaker using various protocols (such as DTS Play-Fi, AirPlay, or DLNA). If a wireless (Wi-Fi) connection is used to connect to a LAN, there is no need to use an Ethernet connection. However, in some installations, a hard-wired Ethernet connection may prove more desirable than a wireless connection. Wi-Fi: This connection technology wirelessly connects a device to a LAN (local area network). When connected to a LAN, audio information can be sent to this speaker using various protocols ((such as DTS Play-Fi, AirPlay, or DLNA). If an Ethernet connection is used to connect to a LAN, there is no need to use a Wi-Fi connection. In some installations a hard-
wired Ethernet connection may prove more desirable than a wireless connection. 10 audIo StreamIng uSage guIde DEVICE APP CONTENT Apple iOS DTS Play-Fi Select music services iTunes music stored on device DLNA server content Apple AirPlay iTunes audio content All iOS music apps MULTI-ROOM SUPPORT Up to eight Multiple simultaneous users Speakers can be zoned One to one Android DTS Play-Fi Select music services iTunes music stored on device DLNA server content Up to eight Multiple simultaneous users Speakers can be zoned Mac PC Apple AirPlay All audio content Up to six DTS Play-Fi All iOS music apps Windows PC Up to eight Multiple simultaneous users Speakers can be zoned Apple AirPlay iTunes audio content Up to six dtS PlayFI and aPPle aIrPlay SetuP NETWORK REQUIREMENTS You must have the following to connect your wireless product to your network:
A wireless router. A high-speed internet connection for reliable playback of internet based music services. Have your network password ready before connecting the wireless product to your network. TIP! If wireless connectivity is weak or not available, connect to your router with an Ethernet cable. that TIP! Your wireless product communicates with wireless networks support 802.11g/n. For best performance, a network that supports 802.11n wireless technology is recommended. A network supporting 802.11b may be used, but it will effectively stream to only one device equipped with DTS Play-Fi. Your wireless product communicates over a 2.4 GHz wireless band, 11 however, it can become slow in locations, such as apartments, where many routers are in operation. Consequently, your wireless product is capable of jumping onto a 5 GHz band on dual band wireless routers. DTS Play-Fi APP REQUIREMENTS An Android device running Android 2.2 or later. An iOS device running iOS 6.0 or later. A Windows PC running Windows 7, 8 (32 and 64 bit), or later. Apple AirPlay REQUIREMENTS An iOS device running iOS 4.3.3 or later. Mac with OS X Mountain Lion, or later. Mac or PC with iTunes 10.2.2, or later. WI-FI INDICATOR LIGHT The Wi-Fi Indicator light tells you what your wireless product is doing (fig. 1 & 2). Rapid Blinking: booting up. Blinking: connecting to a wireless router. Slow Pulse: Access Point Setup Mode. Two Blinks & Pause: WPS (Wi-Fi Protected Setup) Mode. Solid: Connected to a wireless router. Off: Connected to a router via Ethernet. DOWNLOADING THE DTS PLAY-FI APP Android Device Users: Download the free DTS Play-Fi app from Google Play or the Amazon App Store. iOS Device Users: Download the free DTS Play-Fi app from the Apple App Store. is not configured to connect to your network, it will continue to blink. If this is the first time your new wireless product is plugged in, the Wi-
Fi Indicator light will start pulsing slowly. If the wireless product is already configured to connect to a wi-fi network, the button will turn solid
(connected) or blink rapidly (not connected). 4. Once the Wi-Fi Indicator light starts pulsing slowly, your wireless product is in Access Point Mode and ready to connect to your wireless network. Note: If the Wi-Fi Indicator light does not pulse slowly, press and hold the Wi-Fi Setup button for 8 seconds. You will hear two tones one at 3 seconds and another at 8 seconds. After 20 seconds, the Wi-Fi Indicator light will begin pulsing slowly to indicate Access Point mode is ready. At anytime you can press the button again to cancel the setup mode. PC Users: Download and install the free DTS Play-Fi program from https://play-fi.com/apps/windows 5. Launch the DTS Play-Fi app. CONNECTING TO A WIRELESS NETWORK:
ACCESS POINT SETUP Access Point Setup causes your MartinLogan wireless product to behave as if it were a wireless router. Using your mobile device or Wi-Fi capable PC, you connect directly to your wireless product using Wi-Fi, select your home wireless network, and enter the network password. 1. For optimal setup conditions place your wireless product next to your wireless router. The device can be moved to its final location after wi-fi setup. 2. Plug in your wireless product and press the Power button. 3. The Wi-Fi Indicator light will start rapidly blinking for about 20 seconds while your wireless product is booting up. If your wireless product Android Device Users:
a) The app will automatically find your device and provide prompts for setup. b) Touch the Setup button on the screen. c) Enter the password for your wireless network;
the app will connect your device to your network. You will notice the Wi-Fi Indicator light will have changed from blinking to solid. This may take up to a minute. If, after a minute, the button continues to blink rapidly, setup failed and you should try again. iOS Device Users:
a) The app will prompt you to set up a new speaker. Click on the screen to view setup instructions. If the app does not prompt you to set up a new device, within the app, go to Settings > Add Play-Fi Device. Follow the on-screen instructions. b) You will be prompted to exit the DTS Play-Fi app and open your iOS devices Settings app. 12 c) Select Wi-fi in Settings. Ensure that Wi-Fi is enabled on your device. Select the Wi-Fi network with Play-Fi in the name. d) Once your wireless product is selected as the Wi-Fi network, exit iOS Settings and open the DTS Play-Fi app. You should now be prompted to select your wireless network and enter your wireless network password. e) Once your device is connected, you will notice that the Wi-Fi Indicator light on your wireless product will change from blinking to solid. This may take up to a minute. If, after a minute, the button continues to blink rapidly, setup failed and you should try again. PC Users:
a) The app will automatically find your device and provide prompts for set up. If the app does not prompt you to set up a new device, within the app go to the settings screen and click Setup Play-Fi Device. Follow the on-
screen instructions. b) Click the Set-up button on the screen. c) Select the speaker(s) you want to set up. c) Enter the password for your wireless network;
the app will connect your device to your network. You will notice the Wi-Fi Indicator light will have changed from blinking to solid. This may take up to a minute. If, after a minute, the button continues to blink rapidly, setup failed and you should try again. 6 Your wireless product is now connected to your wireless network. Reconnect your mobile device or PC to your wireless network. You may re-
name your device using the app. CONNECTING TO A WIRELESS NETWORK:
WI-FI PROTECTED SETUP (WPS) Wi-Fi Protected Setup (WPS) is a feature found on most wireless routers that allows your wireless product to securely and automatically connect 13 without needing to enter a password. WPS is not a standard feature on all routers, and only one wireless product can be set up at a time. Check your routers owners manual to see if WPS is an available feature, or look for a button on your router marked with the WPS logo (
). If your router does not have WPS, then use Access Point Wireless Setup. 1. For optimal setup conditions place your wireless product next to your wireless router. The device can be moved to its final location after wi-fi setup. 2. Plug in your wireless product and press the Power button. 3. The Wi-Fi Indicator light will start rapidly blinking for about 20 seconds while your wireless product is booting up. If your wireless product is not configured to connect to your network, it will continue to blink. If this is the first time your new wireless product is plugged in, the Wi-
Fi Indicator light will start pulsing slowly. If the wireless product is already configured to connect to a wi-fi network, the button will turn solid
(connected) or blink rapidly (not connected). 4. To initiate Wi-Fi Protected Setup (WPS), for 3 seconds, press and hold the Wireless Setup button on the back of your wireless product until you hear a tone. The Wi-Fi Indicator light will blink twice in continuous intervals to indicate WPS mode. Now push the WPS button (
) on your router. If you cannot find a WPS button on your router, refer to the routers owners manual. 5. Once the Wi-Fi Indicator light turns solid (not blinking), this indicates your wireless product is connected to your wireless network. If, after a minute, the button continues to blink rapidly, setup failed and you should try again. 6. Connect your mobile device or PC to the same network as your wireless product. 7. Launch the DTS Play-Fi app. Upon launching, it will automatically detect your wireless product and should prompt you to name your wireless product. CONNECTING TO A WIRED NETWORK 1. Using an Ethernet cable, connect your wireless product to your router. 2. Plug in your wireless product and press the Power button. 3. The Wi-Fi Indicator light will start rapidly blinking for about 20 seconds while your wireless product is booting up. 4. The Wi-Fi Indicator light turns off when the wireless product is connected via Ethernet. 5. Connect your mobile device or PC to the same network as your wireless product. 6. Launch the DTS Play-Fi app. Upon launching, it will automatically detect your wireless product and should prompt you to name your wireless product. APPLE AIRPLAY SETUP (WITHOUT DTS APP) If you do not want to install and use the DTS Play-Fi app you can still setup the wireless product to work with iTunes and AirPlay on your Mac or Windows PC using the following procedure. Alternate Connection for Mac and Windows PC:
1. To avoid a delayed wireless set up, place your wireless product in close proximity to your router during wireless set up. 2. Plug in your wireless product and press the 3. The Wi-Fi Indicator light will start rapidly blinking for about 20 seconds while your wireless product is booting up. If your wireless product is not configured to connect to your network, it will continue to blink. If this is the first time your new wireless product is plugged in, the Wi-
Fi Indicator light will start pulsing slowly. If the wireless product is already configured to connect to a wi-fi network, the button will turn solid
(connected) or blink rapidly (not connected). 4. Once the Wi-Fi Indicator light starts pulsing slowly, your wireless product is in Access Point Mode and ready to connect to your wireless network. Note: If the Wi-Fi Indicator light does not pulse slowly, press and hold the Wi-Fi Setup button for 8 seconds. You will hear two tones one at 3 seconds and another at 8 seconds. After 20 seconds, the Wi-Fi Setup and Status button will begin pulsing slowly to indicate Access Point mode is ready. At anytime you can press the button again to cancel the setup mode. 5. Ensure that Wi-fi is enabled on your computer. Go to your computers Wi-Fi set up. Select the Wi-Fi network with Play-Fi in the name. 6. Once your wireless product is selected as the Wi-Fi network, open your web browser and type http://192.168.0.1/index.html in the address bar. You will see a web page from your wireless product. 7. Click on Setup. 8. A list of wireless networks will be displayed. Click on the wireless network you wish to connect to. 9. Enter the password for your wireless network then click Next. Power button. 10. Enter a name for your wireless product and then 14 click Next to connect your wireless product to your network. 11. Your wireless product will attempt to connect to your network. Once the Wi-Fi Indicator light turns solid (not blinking), this indicates your wireless product is connected to your wireless network. If the Wireless button rapidly blinks, setup failed and should be tried again. 15 PlayIng audIo uSIng PlayFI AUTOMATIC INPUT SELECTION Your speaker may automatically switch to the streaming input if it detects that a new Play-Fi con-
nection has been established with the speaker. PLAYBACK FROM THE DTS APP Note: Future updates to the DTS Play-Fi application may change functionality. 1. Launch the DTS Play-Fi app on your mobile device or PC (located in the system tray). 2. Android and iOS Device Users: Within the Play-Fi app, select your music source. You can choose from your personal music library, Internet Radio, or from select internet music services. PC Users: Any audio content from your computer can be streamed using Play-Fi. 3. If you have more than one Play-Fi speaker connected to your network, you will be prompted to select the speaker to which you want to stream. CONTROLLING MULTIPLE SPEAKERS If you have more than one Play-Fi speaker connect-
ed to your network, you can simultaneously stream the same audio to multiple speakers. 1. Android and iOS Device Users: Within the app, press the Play-Fi logo in the lower corner of the app. PC Users: open the Play-Fi program using the icon in your system tray. 2. Select additional devices to play audio from. PC Users: The free version of the Windows app may not allow streaming to multiple speakers. An upgraded version of the DTS Play-Fi app, with this capability, can be purchased from the DTS website. Note: 8 Play-Fi speakers can be synced to play the same audio content at the same time. We recommend up to 32 Play-Fi speakers on a network for the best experience, but the only limit to connected devices is how many your router can support. TIP! Primary and Secondary Speakers When streaming audio content to multiple devices, you will be asked to assign them to two categories:
primary and secondary devices. The DTS Play-Fi module requires a primary device be selected. This maximizes synchronization between multiple devices simultaneously streaming the same content. Select the DTS Play-Fi device with the strongest signal as your primary device. Secondary devices connect to your primary device, so if you disable your primary device, you will need to select a new primary device before audio resumes on your secondary devices. ADDITIONAL PLAY-FI FEATURES New versions of the Play-Fi app will add features not mentioned in this manual. Please refer to the app and related documentation for details on new and enhanced features such as streaming different audio content to multiple zones and grouping of two discrete speakers for stereo (left/right) playback. 16 PlayIng audIo uSIng aIrPlay AUTOMATIC INPUT SELECTION Your speaker may automatically switch to the streaming input if it detects that a new AirPlay con-
nection has been established with the speaker. PLAYBACK FROM AN APPLE iOS DEVICE 1. Open your music application. 2. Press the AirPlay Icon and choose your speaker from the list. 3. Play music. 2. Click the AirPlay icon (usually located in the upper left of the iTunes window) and choose your speaker from the list. You can choose multiple speakers if you have more than one speaker on your network. 3. Play music. CONTROLLING PLAYBACK USING ITUNES To control playback (play/pause/volume) from your speaker or remote control, follow these steps:
1. On your computer, launch iTunes (version 10.2.2 or later). PLAYBACK FROM ITUNES ON A MAC OR PC (PERSONAL COMPUTER) 1. Launch iTunes (version 10 or later). 2. Open Preferences and choose Devices. 3. Check the box for Allow iTunes audio control from remote speakers and click okay. uPdateS and rebootIng DTS PLAY-FI APP UPDATE If the DTS Play-Fi app on your mobile device or PC requires an update, you will be notified that an update is available and guided through the update process. FIRMWARE UPDATE Your wireless product may occasionally require firmware updates. Please check www.martinlogan. com for the latest firmware updates. DTS PLAY-FI MODULE UPDATE The DTS Play-Fi module within your speaker will occasionally require an update. If an update is needed, the DTS Play-Fi app will notify you and guide you through the update process. REBOOTING Press and hold the power button for 3 seconds to reboot your wireless product. FACTORY RESET Press and hold the power button for 10 seconds to reset your wireless product to factory settings and clear the network configuration. 17 arc (anthem room correctIon) 3. Using the USB cable, connect the ARC microphone to a Windows PC running Windows 7 or 8 (32 and 64 bit). The USB cable and ARC microphone are provided with your wireless product. 4. Look for the icon on your desktop and launch the ARC program. Follow the prompts on your computer screen to successfully run the ARC software; the entire process should take approximately 15 minutes. 5. Hold the ARC microphone with your arm fully extended, the ARC microphone tip must point towards the ceiling and it must be positioned at ear level (fig. 3). 6. For best results, hold the microphone in 5 different positions around the room. TIP! Once the ARC process is complete, the corrected listening curves will be stored and music will be played back reflecting these corrections. To turn ARC correction on and off, press and hold the mute button for 5 seconds. A negative tone will sound to verify ARC is switched off. A positive tone will sound to verify ARC is switched on. Even when the finest speakers are perfectly positioned, the room itself still has a dramatic impact on any systems sound, an impact more profound than that of any individual component. Various solutions have fallen in and out of favor over the years, but none has solved the problem of the room. Until ARC. Using proprietary processes and the power of your PC, the ARC system analyzes each speakers in-
room sound, then computes the required correction to yield optimal performance from every speaker. Its a process that takes approximately 15 minutes. Anthems approach is a true audiophile solution to the problems of the room. IMPORTANT! The listening space must be silent while performing ARC. A noisy computer fan, a dishwasher or microwave running, etc. can negatively affect ARCs measurements. How to Use ARC Technology:
1. Ensure that your wireless product is already connected on your home network and is powered on. 2. Download the ARC-2 software from www. anthemAV.com and install it. Once the drivers are installed, follow the on-screen instructions. Fig. 3 ARC Microphone Ear Level 18 contactIng cuStomer ServIce MartinLogan customer service is available MondayFriday between the hours of 8am5pm
(central time) by calling (785) 749-0133 or by emailing service@martinlogan.com. general InFormatIon WARRANTY INFORMATION Your wireless product is provided with an automatic Limited 90 Day Warranty coverage. You have the option, at no additional charge, to receive a Limited 2 Year Warranty coverage. To obtain the Limited 2 Year Warranty coverage, please complete and return the Certificate of Registration to MartinLogan within 30 days of purchase. For your convenience, MartinLogan also offers online warranty registration at www.martinlogan.com. MartinLogan may not honor warranty service claims unless we have a completed Warranty Registration card on file! If you did not receive a Certificate of Registration with your new wireless product, you cannot be assured of having received new units. If this is the case, please contact your authorized MartinLogan dealer. SERVICE Should you use your MartinLogan product in a country other than the one in which it was originally purchased, we ask that you note the following:
1 The appointed MartinLogan distributor for any given country is responsible for warranty servicing only on units distributed by or through it in that coun-
try in accordance with its applicable warranty. 2 Should a MartinLogan product require ser-
vicing in a country other than the one in which it was originally purchased, the end user may seek to have repairs performed by the nearest MartinLogan distributor, subject to that distribu-
tors local servicing policies, but all cost of repairs
(parts, labor, transportation) must be borne by the owner of the MartinLogan product. SERIAL NUMBER The serial number is located on back of the wireless product, near the connection panel. The serial num-
ber may also be found on the product carton. 3 If, after owning your speaker for six months, you relocate to a country other than the one in which you purchased your speaker, your warranty may be transferable. Contact MartinLogan for details. 19 Frequently aSked queStIonS How do I connect the wireless product to my television, Blu-Ray/DVD/CD player?
If your television has analog outputs these can be used instead. How do I clean my wireless product?
Use a dust free cloth (such as a micro fiber cloth) or a soft brush to remove dust from your speakers. Do not spray any kind of cleaning agent on or in close proximity to the drivers . Could you suggest a list of suitable elec-
tronics and cables ideal for MartinLogan speakers?
We have no favorites and use electronics and cables quite interchangeably. We would suggest listening to a number of brandsand above all elsetrust your ears. Dealers are always the best source for information when purchasing additional audio equipment. troubleShootIng Can I use other cables other than those provided with the wireless product?
The cables included with the wireless product are intended to get you started. You may find it neces-
sary to augment your system with additional cables or replace the included cables with cables of different length. Is there likely to be any interaction between my speakers and the television in my A/V system?
Yes, but only with CRT televisions. This wireless product is not magnetically shielded and should be kept at least 2 feet away from a CRT television. LCD and plasma televisions will not be affected. How can I remove the grille cloth from the wireless product?
The wireless product grille cover is not removable. Im having trouble using the Play-Fi app. For information on the DTS Play-Fi app, please visit: https://play-fi.com/faq Wireless product does not turn on. Check that the wireless products AC power cord is firmly attached to the AC Power In input and plugged into a working AC outlet. The Wi-Fi Indicator light does not light up. When connected to a network with an Ethernet cable, this light will turn off. I am unable to connect my wireless product to my network. Verify that your wireless network is functioning. Your routers wireless signal may be weak or your wireless product may be out of the range of your Wi-Fi network. Move the wireless product closer to the router or use an Ethernet connection instead. Before connecting to your network, verify that your wireless products Input button is illuminated in white. This indicates network streaming mode. If the Input button is illuminated in blue your wireless product is in Analog mode. Press the Input button to enter network streaming mode (white). Reboot your wireless product. On the wireless products control panel, press and hold the power button for 3 seconds. The reset tone will sound once. This reboot will cycle the power off and on and force the wireless product to reconnect to your network. 20 Reset your wireless product to factory settings. On the wireless products control panel, press and hold the power button for 10 seconds. The reset tone will sound twice. Once complete, your wireless product will be reset to factory default settings and will clear the network configuration. After a reset has been performed, there is no way to recover the previous user configured settings. The Play-Fi app cannot find my wireless product. If you are trying to setup your wireless product, verify the wireless product is fully powered on and in Access Point Mode (Wi-Fi Indicator light is pulsing slowly). If the Wi-Fi Indicator light does not pulse slowly, press and hold the Wi-
Fi Setup button for 8 seconds. You will hear two tonesone at 3 seconds and another at 8 seconds. Verify you are within the recommended range of your wireless router. Verify your mobile device or PC has its Wi-Fi enabled or is otherwise connected to your network. Verify there are no other apps running on your device that might impede wireless connectivity to your network. Restart your phone, tablet, or PC. If you still cant find the wireless product on your network and are in an office environment, verify with your network administrator that no special permissions are enabled that would prevent external wireless products from communicating with the network. If the wireless product is still not found, uninstall, re-download, and re-install the DTS Play-Fi app on your mobile device or PC. Reboot your wireless product. On the wireless products control panel, press and hold the power button for 3 seconds. The reset tone will sound once. This reboot will cycle the power off and on and force the wireless product to reconnect to your network. Reset your wireless product to factory settings. On the wireless products control panel, press and hold the power button for 10 seconds. The reset tone will sound twice. Once complete, your wireless product will be reset to factory default settings and will clear the network configuration. After a reset has been performed, there is no way to recover the previous user configured settings. The Play-Fi app reports Play-Fi Devices Lost. Check that your device is powered on. Verify you have a strong network signal. Verify the network connection has not been lost. Check for other devices that might be causing heavy network traffic. Verify that your mobile device or PC has not left the range of your router. Verify that your mobile device or PC and your wireless product are connected to the same network. Verify that your wireless products wireless streaming has not been taken over by another app. Exit and then restart the DTS Play-Fi app. Uninstall, re-download, and re-install the DTS Play-Fi app on your mobile device or PC. Reboot your wireless product. On the wireless products control panel, press and hold the power button for 3 seconds. The reset tone will sound once. This reboot will cycle the power off and on and force the wireless product to reconnect to your network. Reset your wireless product to factory settings. On the wireless products control panel, press and hold the power button for 10 seconds. The reset tone will sound twice. Once complete, your wireless product will be reset to factory default settings and will clear the network configuration. After a reset has been performed, there is no way to recover the previous user configured settings. 21 No output from the wireless product. Check that the wireless product is turned on. Check that the wireless product is not muted. Check that the wireless products volume is not to the Sub Out connection on the wireless product and to the appropriate input on the subwoofer. Turn the wireless product off and on using the turned all the way down. Power button. Check that the wireless product is set to the Unplug the wireless product, wait 30 seconds, proper input. and plug it back in. Check that all system components are turned on and source material is playing. Turn the wireless product off and on using the Power button. External sub is too quiet. Turn up the volume on the subwoofer. Adjust the bass level setting in the wireless Unplug the wireless product, wait 30 seconds, product menu system. and plug it back in. Try moving the subwoofer to a different loca-
Check that all interconnecting cables are con-
tion in the listening room. nected at both ends. If necessary, try connecting an alternate source component to make sure the original source component isnt the problem. My wireless product is not behaving as expected. Turn the wireless product off and on using the Power button. Unplug the wireless product, wait 30 seconds, and plug it back in. When using the Analog Input, sound is coming from both my wireless product and my connected television. When utilizing the wireless product to repro-
duce audio, the televisions audio output should be defeated. Some televisions will allow you to turn off the internal speaker via the televisions menu system. Other televisions may require you to turn the televisions volume to zero or to mute the television. When using the Analog Input, the wire-
less product is too quiet even when the wireless product is turned up. Check that the output on your television or other source components are not connected via a variable level output. Sometimes this option may be configured in your source components menu. Please refer the manual for the source component in question. No sound coming from external sub Check that the external sub is turned on. Check that the subwoofer cables are attached 22 bravado SPecIFIcatIonS*
Frequency Response . . . . . . . . . . . . . . . . . . . . . 4520,000 Hz 2 dB Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91dB Crossover Frequency . . . . . . . . . . . . . . . . . . . . . 3,000 Hz Amplifier Power . . . . . . . . . . . . . . . . . . . . . . . . High Frequency Drivers . . . . . . . . . . . . . . . . . . . 1 x 50 Watts (woofer). 2 x 25 Watts (tweeters) 200 Watts (200 Watts peak) combined total output. Two 0.94 x 1 (2.4cm x 2.5cm) Folded Motion Transducers with 2.8 x 1.25 (7.1cm x 3.2cm) diaphragm. Low Frequency Drivers . . . . . . . . . . . . . . . . . . . 5 (12.7cm) fiber cones with extended throw drive assembly. Non-resonant asymmetrical chamber format. Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sealed Components . . . . . . . . . . . . . . . . . . . . . . . . . . . DSP based preamplifier Wireless Input . . . . . . . . . . . . . . . . . . . . . . . . . Apple AirPlay, DTS Play-Fi Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Analog 3.5mm, Ethernet, AC Power Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Subwoofer Out via Analog RCA Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Left/Stereo/Right position switch Wireless Connectivity . . . . . . . . . . . . . . . . . . . . 2.4 GHz and 5.0 GHz; 802.11 a/g/n Room Correction . . . . . . . . . . . . . . . . . . . . . . . . ARC (Anthem Room Correction) with included cali-
brated microphone Power Draw . . . . . . . . . . . . . . . . . . . . . . . . . . . Max: 120 Watts, Idle: 9 Watts, Standby: < 0.3 Watts Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20.5 lbs. (9.3 kg) Dimensions (HxWxD) . . . . . . . . . . . . . . . . . . . . 5 x 39.9 x 5.85 (12.7cm x 101.3cm x 14.8cm) 23
*Specifications are subject to change without notice. Forte SPecIFIcatIonS*
Amplifier Power . . . . . . . . . . . . . . . . . . . . . . . . Class-D Amp; 2 x 100 Watts RMS 4 Ohms (2 x 200 Watts peak) Wireless Input . . . . . . . . . . . . . . . . . . . . . . . . . Apple AirPlay, DTS Play-Fi Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Left/Right RCA Analog Ethernet, AC Power Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Subwoofer Out via Analog RCA Wireless Connectivity . . . . . . . . . . . . . . . . . . . . 2.4 GHz and 5.0 GHz; 802.11 a/g/n Room Correction . . . . . . . . . . . . . . . . . . . . . . . . Power Draw . . . . . . . . . . . . . . . . . . . . . . . . . . . ARC (Anthem Room Correction) with included calibrated microphone Max: 120 Watts, Idle: 9 Watts, Standby: < 0.3 Watts Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20.5 lbs. (9.3 kg) Dimensions (HxWxD) . . . . . . . . . . . . . . . . . . . . 5 x 39.9 x 5.85 (12.7cm x 101.3cm x 14.8cm)
*Specifications are subject to change without notice. 24 dImenSIonal drawIngS: bravado 25 dImenSIonal drawIngS: Forte 26 L a w r e n c e , K a n s a s , U S A t e l 7 8 5 . 7 4 9 . 0 1 3 3 f a x 7 8 5 . 7 4 9 . 5 3 2 0 w w w . m a r t i n l o g a n . c o m 2015 MartinLogan Ltd. All rights reserved. Rev. #062515 27 FCC Information and Copyright Operations in the 5.15~5.25GHz band are restricted to indoor usage only. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 28
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2015-10-20 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
2 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2015-10-20
|
||||
1 2 | Applicant's complete, legal business name |
Meiloon Industrial Co., Ltd.
|
||||
1 2 | FCC Registration Number (FRN) |
0010919843
|
||||
1 2 | Physical Address |
No.99, Xingfu Road, Taoyuan Dist
|
||||
1 2 |
Taoyuan City, N/A 330
|
|||||
1 2 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
T******@siemic.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
R48
|
||||
1 2 | Equipment Product Code |
BRAVA
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
P****** P********
|
||||
1 2 | Title |
Electric Engineer
|
||||
1 2 | Telephone Number |
+886-******** Extension:
|
||||
1 2 | Fax Number |
+886-********
|
||||
1 2 |
p******@meiloon.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 | NII - Unlicensed National Information Infrastructure TX | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | active loudspeaker | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power listed is conducted output power. The device includes both 20MHz and 40MHz Bandwidth for 2.4GHz. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures | ||||
1 2 | Power listed is conducted output power. Device is mobile and portable client devices in the 5.15-5.25GHz band. The device includes both 20MHz and 40MHz Bandwidth for 5GHz. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Keyway Testing Technology Co., Ltd.
|
||||
1 2 | Name |
J**** Y******
|
||||
1 2 | Telephone Number |
86-76********
|
||||
1 2 | Fax Number |
86-76********
|
||||
1 2 |
j******@keywaytest.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 2412.00000000 | 2462.00000000 | 0.0366400 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15E | 38 CC | 5180 | 5240 | 0.02109 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15E | 38 CC | 5745 | 5825 | 0.01762 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC