FCC ID: XAT-MN4310 ATTACHMENT H.
- Hardware Manual -
SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA TEL:+82 31 639 8517 FAX:+82 31 639 8525 www.hct.co.kr Report No. : HCT-RF09-0427 1/1 HCT CO., LTD. Table of Contents Safety notes for handling the PND 2 Before using 1) Scope of delivery 2) Device overview 3) Switching ON/OFF 4) Initial startup of the PND Menus 1) Main Menu 2) BLUETOOTH 3) Entertainment Audio Player Picture Viewer Video Player 4) Settings 5 5 6 7 8 9 9 16 25 26 29 31 32 Troubleshooting Table 34 Technical Data Warranty 35 36 1 Safety notes for handling the PND For your personal benefit, carefully read the following safety notes and warnings before operating your PND for the first time Caution:
Do not operate the PND while driving to protect yourself and others against accidents!
View the display only if you are in a safe travel situation!
The street routing and traffic signs have priority over the instructions of the navigation system. Follow the instruction of the PND only if circumstances and traffic regulations allow! PND will bring you to your destination even if you have to deviate from the planned route. Notes:
Routes are best planned before starting your trip. If you want to enter a new route while on the road, head for the next parking or rest area. If you did not understand the voice information or if you are not sure what to do at the next intersection, use the map or arrow display for quick orientation. Caution:
Protect the device against moisture since it is not waterproof and not splash proof. Do not open or modify the device. Do not expose the device to extreme temperatures (e.g. in a parked car with direct sun exposure) to avoid condensation or overheating inside the device Otherwise, the device or the battery could be deformed, ignite or explode. Notes:
Remove the power supply connector of the PND if you switch off the engine for more than 3 days since the GPS receiver constantly uses electricity and could discharge the vehicle battery. Do not unplug the connector by pulling on the wire. The wire could be damaged. Do not use harsh solvents to clean the device; use only a damp, lint-free cloth. Use as directed The device is designed for mobile use in vehicles. The device can also be used by pedestrians. Special information about the navigation of trucks, buses and campers, such as altitude and width limitations or maximum permissible road load, is not included in the navigation data!
Navigation off the roads (off-road) is only possible to a limited extent with the PND. 2 Safety notes for handling the PND GPS Reception GPS (Global Positioning System) is a satellite-based system that supports geographical and time-related information all around the world. The system is operated and controlled by the United States of America. The USA is also responsible for the availability and accuracy of this system. All changes to the GPS availability and accuracy, as well as other factors from the surrounding environment can influence the operation of the navigation system. The supplier of this system does not accept any liability whatsoever for the availability and accuracy of GPS data. When you switch on the PND for the first time, it can take several minutes for the GPS reception to reach a sufficient level and to determine your current position. Always hold the navigation system vertically. If you are using the navigation system in an inner city-area, it may take longer to refresh the map details. 3 Safety notes for handling the PND WEEE Compliance All electronical and electronic equipment must be disposed of separately from general household waste using the sites designed by local authorities. If a product displays this symbol of a crossed-out rubbish bin, the product is subject to European Directive 2002/96/EC. The appropriate disposal and separate collection of used equipment serve to prevent potential harm to the environment and to health. They are a requirement for the re-use and recycling of used electrical and electronic equipment for the re-use and recycling of used electrical and electronic equipment. For further information on disposing of your used equipment, please contact your local authority, your re-use collection service or the dealer you purchased the product from. In many countries it is forbidden to dispose of flat batteries and rechargeable batteries with normal household waste. Please find out the regulations that apply in your area regarding the disposal of used batteries/rechargeable batteries. Please also dispose of damaged batteries or batteries that are past their expiry date in a safe and suitable way. Use the return and collection systems available to dispose of the old device. Do not discard any batteries in the household trash; instead, return them to the corresponding collection sites. 4 Before using Scope of delivery The scope of delivery contains the following components:
Suction Cup Holder Cigar Power charger Dummy Cradle Dashboard Plate AC/DC Adapter Pouch Earphone Manual Note:
We recommend using original accessories. 5 Before using Device overview Earphone Jack (3.5mm) Power ON/OFF and HOLD Switch Button 4.3 inch LCD Panel with Window Touch Screen SD Card Slot USB Connector DC Power Jack Volume Key (up & down) Menu Key Mute Key Status LED Audio /Video Input Jack (3.5) Reset Button Stylus Pen External GPS Antenna Port Battery Cover 6 Before using Switching on/off Initial switch-on During the initial switch-on of the PND, the software is loaded into the system. For this reason, the switch-on process may last up to one minute. The initial destination guidance also requires a longer time than usual. Switch-on
* To switch on the PND, slide and hold the switch to power position more than 3 seconds. The PND is switched on. (If the device is in the sleep mode, the previously active display is shown again). Switch-off
* Slide and hold the switch for longer than 3 seconds to switch off the device. The PND will be switched off. Back to main menu
* To go back to the main menu, while you are in other sub-menus or using other applications, touch the menu key on the window touch screen. The main menu will be shown. Reset Button
* When the system is not responding to touch the screen or any keys, please push the reset switch on bottom side of the device. 7 Before using Initial startup of the PND Protective film and covers Prior to the initial use, remove the protective film from the display. The battery The built-in battery allows for operating the PND battery-operated for up to 3.5 hours. The exact usage time is dependent upon the type of operation. The charge state indicator of the battery is located at the top in the centre of the display in the map view. The number of bright block segments on the battery symbol indicates the charge state of the battery (0 to 3 segments). The symbols have the following meaning:
The device is supplied by an external power source. The device is supplied by its internal battery. The charge state of the battery is sufficient. The device is supplied by its internal battery. The charge state of the battery is low. If the charge state of the battery is very low, a warning message is displayed. To charge the battery, attach the supplied battery charger or the charger cable for the cigarette lighter to the charging socket. Notes:
* Use only original chargers for operating and charging the battery.
* The battery is equipped with a protection to prevent overheating. For this reason, the battery stops charging at an ambient temperature above 45 C. 8 Menu After switching on the Navigation System, you will see the main menu as below. Main Menu Navigation program BLUETOOTH To start navigation software, click this icon, then designed navigation software will be started. With this BLUETOOTH feature, You can talk, listen music through this Navigation system. Entertainment You can play audio and video files and enjoy various games. Setting SafNAVI To set display, sound, volume and change menu language. Cutting edge technology LDWS
(Line Detect Warning System) can help you to stay in the lane. Also, additional feature BLACKBOX record video images in certain situation like accident.
* Camera module sold separately. 9 BLUETOOTH Bluetooth function Bluetooth is a wireless radio connection over a short distance. Hence, a Bluetooth-capable cell phone allows using the navigation device as a hands-free system. In addition, music tracks stored on the cell phone can be played and navigated. Prerequisite:
Compatible Bluetooth cell phone. Bluetooth function and cell phone visibility are activated. Note:
The Bluetooth connection can be established only to one cell phone. If more registered cell phones are available, the Bluetooth connection is established to the one that was registered last. 16 BLUETOOTH Starting the Bluetooth application Touch the Bluetooth symbol in the main menu. The Bluetooth Menu will be displayed Also the Bluetooth function is being activated. For the Bluetooth connection, the device must be registered with the cell phone. Registering the devices Registering is the first contact between an unknown cell phone and the navigation device. The devices "become acquainted". When you start the Bluetooth application for the first time, you have to search and paired with your cell phone. 17 BLUETOOTH Registering the devices Registering is the first contact between an unknown cell phone and the navigation device. The devices "become acquainted". When you start the Bluetooth application for the first time, the query Bluetooth is not connected. Do you want to connect?"
appears. Touch the Yes button to register the cell phone. Touch the Stop button to end the search for Bluetooth-capable devices. Touch the cell phone in the list to register it. Touch the Connect button. A PIN query is displayed. Enter the PIN "0000" in your cell phone. The devices are registered and a Bluetooth connection is established. You have the following options:
Using the hands-free system ("Calling") Using audio transmission if your cell phone supports this function with the device ("Audio transmission") Notes:
Every cell phone uses different ways to register and establish a Bluetooth connection. For this purpose, please read the instructions of your cell phone. After you switched off the device or physically separated the cell phone and the device, the Bluetooth connection must be re-established.
(Ch. "Performing Bluetooth settings", "Paired devices") 18 BLUETOOTH Calling If a Bluetooth connection exists, you can use the navigation device with the cell phone as hands-free system. Prerequisite:
Bluetooth connection to cell phone. Touch the Call symbol in the Bluetooth Menu. The Call menu is displayed. Making a call Enter a phone number of your choice via the keyboard. Touch the Send button. The call is made. Touch the Cancel button to end the call. During the phone call, you have the option of redirecting the phone call to the cell phone:
Touch the Transfer button. Note:
The phone numbers dialed are stored and displayed in the Call menu next to the keyboard. Selecting stored phone numbers Touch the phone number in the list. Touch the Send button. Deleting stored phone numbers Touch the phone number in the list. Touch the Options button. Touch the Delete symbol to delete the entry.
- or -
Touch the Delete all symbol to delete all entries. 19 BLUETOOTH Answering or rejecting a call If a call comes in, the "Incoming Call" message and the phone number of the caller are displayed:
Touch the Yes button to answer the call. Touch the No button to end a call or to reject a call. Using the phone book If you loaded the phone book from your cell phone, you can use the phone numbers with the navigation device. Touch the Phonebook symbol in the Bluetooth Menu. The Phonebook menu is displayed. Touch the phone number in the list. Touch the Options button. Touch the symbol to place the call. Touch the symbol to delete the entry.
- or -
Touch the symbol to delete all entries. Audio transmission If a Bluetooth connection exists, you can use the navigation device to listen to music that is stored on your cell phone. Prerequisite:
Your cell phone supports this function. Note:
Every cell phone supports the audio transmission in a different way. For this purpose, please read the instructions of your cell phone. Touch the Music Player symbol in the Bluetooth Menu. The Music Player menu is displayed. Touch the button to start the playback. Press the VOL - or VOL + button to adjust the volume. Note:
The maximum volume depends on the adjusted volume in the cell phone. Touch the button to play the next track. Touch the button repeatedly to play the current or the previous track. Touch the button to end the playback. 20 BLUETOOTH Performing Bluetooth settings Settings in the Bluetooth Settings menu:
Activating/deactivating the Bluetooth function. Switching visibility on/off Paired devices Search for devices Ringtone Establishing the connection automatically Resetting Bluetooth Automatic call answering Loading the phone book The second page of the menu also contains the following settings:
Touch the Setting symbol in the Bluetooth Menu. The Bluetooth Settings menu is displayed. Touch the button to scroll in this menu. If you performed changes to the settings:
Touch the button to exit the menu. Activating/deactivating the Bluetooth function Touch the Bluetooth on/off symbol to activate (check mark) or deactivate (no check mark) Bluetooth. Switching visibility on/off The navigation device can be visible or invisible to other Bluetooth-ready devices. Touch the Discoverable symbol to switch the visibility on (check mark) or off (no check mark). 21 BLUETOOTH Paired devices You can call up the list of already registered cell phones and edit it. Touch Paired Devices the symbol. The Paired Devices menu is displayed. Touch a cell phone in the list. Touch the Options button to display additional functions. Note:
If you want to pair a cell phone with the device, first unpair an existing Bluetooth connection. Touch the Connect symbol to establish the Bluetooth connection. Touch the Disconnect symbol to disconnect the Bluetooth connection. Touch the Rename symbol to rename the cell phone in the list. Note:
If you delete a cell phone from the list, it is unpaired. That is, a Bluetooth connection can no longer be established to this cell phone. Touch the Delete symbol to delete the cell phone from the list. Touch the Delete all symbol to delete all cell phones. Search for devices If you want to pair additional Bluetooth-ready devices, you can start the search. Note:
You can register up to 10 cell phones. If you register an eleventh one, the oldest cell phone is deleted. Touch Inquiry the symbol. The Inquiring menu is displayed. The search for Bluetooth-ready devices starts. Devices found are listed. If the desired device is listed:
Touch the Stop button to end the search. Touch the Refresh button to continue the search. Touch the cell phone in the list to register it. Touch the Connect button. A PIN query is displayed. Enter the PIN "0000" in your cell phone. 22 BLUETOOTH Ringtone Touch the User Ringtone symbol. The Ring Tone menu is displayed. Touch the desired ringtone. Press the VOL - or VOL + button to adjust the volume. Establishing the connection automatically After switching off the device, the Bluetooth connection can be re-established automatically. Prerequisite:
Cell phone is registered ("Search for Bluetooth-ready devices") On the second page of the Bluetooth Settings menu, touch the symbol to switch on the automatic connection(check mark) or to switch it off (no check mark). Resetting Bluetooth If the Bluetooth connection does not work properly, a simple reset may help. Note:
An existing Bluetooth connection is disconnected with a reset. All registered cell phones are unregistered. The cell phones must then be reregistered with the device. Touch the Reset Bluetooth symbol on the second page of the Bluetooth Settings menu. A confirmation is displayed. Touch the Yes button to perform the reset.
- or -
Touch the No button to cancel the procedure. Automatic call answering An incoming call can be answered automatically:
On the second page of the Bluetooth Settings menu, touch the symbol to switch on automatic answering (check mark) or to switch it off (no check mark). 23 BLUETOOTH Loading the phone book The phone book in your cell phone can be loaded into the navigation device and used with it. Prerequisite:
Your cell phone supports this function. Note:
For entries with several phone numbers in the cell phone, the first phone number is transferred to the phone book. Touch the Get Phonebook symbol on the second page of the Bluetooth Settings menu. A confirmation is displayed. Touch Yes to load the phone book.
- or -
Touch No to cancel the procedure 24 Entertainment Audio Player Picture Viewer Video Player Game
- Sudoku, Freecell, Solitaire, PictureFind, PictureChange 25 Entertainment Audio Player Previous Track Next Track Song Title Current played time Track Duration Equalizer Normal Classical Jazz - Rock Album Art Option Stop Play / Pause Volume Fast forward Rewind 26 Entertainment Audio Player - Option MIX Activate/deactivate random playback order. Repeat Turn on/off repeat all track. ID3 Tag Turn on/off display track information Browse Browse audio files in internal and external memory. 27 Entertainment Audio Player - Browse Album Switch to the list and the album selection. Artist Switch to the list and the artist selection. Genre Switch to the list and the genre selection. Play list Browse Browse audio files in internal and external memory. 28 Entertainment Picture viewer Previous Picture Next Picture File name Picture Screen
- Touch this area for expanding to full screen. Option Slide show Next Folder Previous Folder 29 Entertainment Picture viewer - Option Slide Time Set time to display a picture. (5-10-15-20-25 seconds) Rotation Rotate a picture. (Left-Right-Auto-No) File name Show picture file name. Browse Browse files in internal and external memory. 30 Entertainment Video Player Audio/Video Input Switch to external A/V input Navigation Bar Play/Pause Note:
This video player supports encoded files by WMV, Xvid and Mpeg4 format. Otherwise, you should convert your video file to suitable format. 31 Setting Display setting
- Change Screen Brightness Sound setting
- Change Volume and turn on/off click sound Language Selection Factory setting
- Back to factory Setting Touchscreen Calibration
- Calibrate Touchscreen FM Transmitter
- Change menu languages (Japanese-English)
- Send out sound through FM frequency Time setting
- Set Time Zone and Display time format (12-24H) Product Information
- Check Software Version Auto On
- To set Auto Power ON/OFF, Start Mode and Setup. 32 Setting Auto on
* Power on/off: To set Auto Power ON/OFF function.
* Start Mode: Choose the program which you want to start automatically when you turn on the device.
* Setup: Turn on or off this function. FMT Setting You can turn the FMT function on or off and also set the preset the frequencies. Auto on
* When out-source power is disconnected, the above pop-up message will be displayed. If you want to switch to battery mode, please touch the screen. Factory Setting When you reset the PND, following saved setting values will be reset. My music Mix(Off), Repeat(Off), ID3(On) My Pictures Slide Time(5), Rotation(No), File name(Off) FMT Reset the preset frequencies Others Brightness(10), Volume(8), Key Click(On), Time Zone(GMT +01:00), Time Format(24), Auto Power(On), Auto Mode(Navigation), Auto Setup(Off) , FMT On/Off(Off) 33 Troubleshooting Problems Solutions No GPS signal in vehicle The GPS signal can be blocked by heated windscreen or tinted windscreens with vacuum-
metalized coating. In this case, you will need an external GPS antenna. No GPS signal Ensure that the navigation system is placed properly and is not obstructed by other objects. GPS signal poor Attempt to adjust the navigation system. The navigation system no longer responds to finger taps or does not switch off. If the navigation system stops responding to your entries you can press the reset button on the bottom side of the device. The data you have saved will NOT be lost. Restart the navigation system by pressing the power button. System fails to start, screen remains blank. Ensure that the battery is fully charged and/or that the device is connected to a power source. If you are using the DC cable, check that the plug is securely and correctly connected to the cigarette lighter. The voice alerts for navigation cannot be heard. Check whether the volume is set to an audible level in the basic setting. Navigation is not accurate An inaccuracy level of 50m is within acceptable limits. If an inaccuracy level occurs repeatedly, please contact an authorized specialized dealer. No sound The device may be set to mute, or the volume is set too low. 34 Technical Data TFT display Active color matrix, 4.3 inch, 480 x 272 pixels Audio Built-in loudspeaker: Mono, 8 Ohm, Max 1.4 Wrms Battery (lithium ion) Voltage: 3.7 V Capacity: 2200 mAh Dimensions (W x H x D) approx. 128 x 79 x 21mm Weight approx. 235 g Charger cable for cigarette lighter Input voltage: 12 V Battery charger Input voltage: 90 V to 240 V, 50/60 Hz Output voltage: 12 V Output current: max. 1 A GPS receiver QuickFind Technology on Centrality Processor 20 channel Multimedia Video File Format Xvid MPEG4+MP3 WMV7,8 WMV9SP+WMA WMV9MP+WMA MPEG2 Audio File Format MP3 WMA OGG Image File Format JPEG BMP TIF GIF (No-animation support) File Information 720x480_2Mbps 720x480_2Mbps 720x480_1Mbps 720x480_600Kbps 720x480_600Kbps 720x480_5Mbps File Information 8-48Khz, 32~320Kbps 8-192Khz, 32~320Kbps 8-48Khz, 48~320Kbps; Up to Q10 Support size 3648 x 2736 3200 x 2400 1280 x 960 1600 x 1200 Performance(FPS) 30 FPS 30 FPS 22 FPS 21 FPS 20 FPS 25 FPS Notes:
* Above specifications are subjected to change without prior notice. 35 FCC INFORMATION Part 15.105 statement Part 15.21 statement Change or Modifications that are not expressly approved by the manufacturer could void the users authority to operate the equipment. FCC RF Radiation Exposure Statement 1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Warranty 36